Surfactant/Nonionic polymer interaction. A NMR diffusometry and NMR electrophoretic investigation

The interaction between the nonionic polymer poly(ethylene oxide) (PEO) of molecular weight 20,000 and surfactants of various types [sodium dodecyl sulfate (SDS), dodecyl trimethylammonium bromide, octyl beta-D-glucoside, and potassium laurate] has been investigated in an aqueous solution at 25 degrees C by 1H NMR pulsed-gradient spin-echo self-diffusion techniques. The SDS/PEO study was further complemented by component-resolved 1H NMR-based studies of the electrophoretic mobility of PEO and the alkyl part of SDS under the same measurement conditions. Through such combined studies, a much more complete picture of the binding and aggregation processes becomes accessible.     

Supramolecular Protein-Polyelectrolyte Assembly at Near Physiological Conditions—Water Proton NMR,ITC, and DLS Study

The in vivo potency of polyphosphazene immunoadjuvants is inherently linked to the ability of these ionic macromolecules to assemble with antigenic proteins in aqueous solutions and form physiologically stable supramolecular complexes. Therefore, in-depth knowledge of interactions in this biologically relevant system is a prerequisite for a better understanding of mechanism of immunoadjuvant activity. Present study explores a self-assembly of polyphosphazene immunoadjuvant—PCPP and a model antigen—lysozyme in a physiologically relevant environment—saline solution and neutral pH. Three analytical techniques were employed to characterize reaction thermodynamics, water-solute structural organization, and supramolecular dimensions: isothermal titration calorimetry (ITC), water proton nuclear magnetic resonance (wNMR), and dynamic light scattering (DLS). The formation of lysozyme–PCPP complexes at near physiological conditions was detected by all methods and the avidity was modulated by a physical state and dimensions of the assemblies. Thermodynamic analysis revealed the dissociation constant in micromolar range and the dominance of enthalpy factor in interactions, which is in line with previously suggested model of protein charge anisotropy and small persistence length of the polymer favoring the formation of high affinity complexes. The paper reports advantageous use of wNMR method for studying protein-polymer interactions, especially for low protein-load complexes.     

Viscoelastic wormlike micellar solutions made from nonionic surfactants: structural investigations by SANS and DLS

A highly viscoelastic micellar solution of nonionic surfactants in a dilute region was recently reported. A transient network of wormlike micelles formed with the addition of short-EO-chain poly(oxyethylene) dodecyl ether surfactants (C12EO(j), j = 1-4) to poly(oxyethylene) cholesteryl ethers (ChEO(m), m = 10 and 15). A gradual increase in micellar length with an increasing C12EO(j) concentration was assumed from the results of model calculations and rheological measurements. We report in this study the results of structural investigations with small-angle neutron scattering (SANS) to confirm this assumption. Tuning from spherical to wormlike and to locally flat structures can be achieved by way of three methods. One can either increase the C12EO(j) concentration or decrease j (smaller headgroup size) at a fixed concentration of C12EO(j). The third possibility is to increase the temperature at a fixed composition. All three methods result in the same structural transition. The formation of a transient network of wormlike micelles analogous to polymer solutions can be observed with dynamic light scattering (DLS). A stretched exponential approach was applied to fit the correlation functions.     

两亲嵌段共聚物聚D-亮氨酸-聚乙二醇与非离子表面活性剂C_(12)Glu的相互作用

采用表面张力法和圆二色谱技术研究了两亲嵌段共聚物聚D-亮氨酸-聚乙二醇单甲醚/非离子表面活性剂n-十二烷基β-D-葡萄糖苷(C12Glu)混合体系在水溶液中的相互作用.结果表明二者之间的疏水缔合作用较弱;聚合物中α-螺旋结构的含量随着体系中表面活性剂浓度的增大而增加.     

Probing the microstructure of nonionic microemulsions with ethyl oleate by viscosity, ROESY, DLS, SANS, and cyclic voltammetry

Microemulsions are important formulations in cosmetics and pharmaceutics and one peculiarity lies in the so-called "phase inversion" that takes place at a given water-to-oil concentration ratio and where the average curvature of the surfactant film is zero. In that context, we investigated the structural transitions occurring in Brij 96-based microemulsions with the cosmetic oil ethyl oleate and studied the influence of the short chain alcohol butanol on their structure and properties as a function of water addition. The characterization has been carried out by means of transport properties, spectroscopy, DLS, SANS, and electrochemical methods. The results confirm that the nonionic Brij 96 in combination with butanol as cosurfactant forms a U-type microemulsion that upon addition of water undergoes a continuous transition from swollen reverse micelles to oil-in-water (O/W) microemulsion via a bicontinuous region. After determining the structural transition through viscosity and surface tension, the 2D-ROESY studies give an insight into the microstructure, i.e., the oil component ethyl oleate mainly is located at the hydrophobic tails of surfactant while butanol molecules reside preferentially in the interface. SANS experiments show a continuous increase of the size of the structural units with increasing water content. The DLS results are more complex and show the presence of two relaxation modes in these microemulsions for low water content and a single diffusive mode only for the O/W microemulsion droplets. The fast relaxation reflects the size of the structural units while the slower one is attributed to the formation of a network of percolated microemulsion aggregates. Electrochemical studies using ferrocene have been carried out and successfully elucidated the structural transformations with the help of diffusion coefficients. An unusual behavior of ferrocene has been observed in the present microheterogeneous medium, giving a deeper insight into ferrocene electrochemistry. NMR-ROESY experiments give information regarding the internal organization of the microemulsion droplets. In general, one finds a continuous structural transition from a W/O over a bicontinuous to an O/W microemulsion, however with a peculiar network formation over an extended concentration range, which is attributed to the somewhat amphiphilic oil ethyl oleate. The detailed knowledge of the structural behavior of this type of system might be important for their future applications.     

NMR investigation on the interaction of β-cyclodextrin and ampicillin

The penetration of ampicillin molecule into the β-cyclodextrin cavity in aqueous solution is studied by ¹ H NMR, 2D COSY and ROESY spectroscopy. Obtained data suggest that the phenyl moiety of ampicillin is included inside the hydrophobic cavity of β-cyclodextrin molecule in the solution, and the mode and depth of this inclusion is confirmed on the basis of 2D ROESY spectral data.     

An NMR investigation of compatibility in blends of poly vinyl chloride and ethylene-vinyl acetate copolymer

A series of technical composite suspension polymerized poly vinyl chloride products with additions of ethylene-vinyl acetate copolymer (Levapren 450M. 45 wt % VAc) have been investigated with NMR. Partial compatibility is found in these samples, and the phase conditions have been shown to be very much dependent upon the methods of forming of the materials. Complete phase separation is observed after prolonged heating.     

Degradation and cis-to-trans isomerization of poly[(2,4-difluorophenyl)acetylene]s of various initial molecular weight: SEC,NMR, DLS and EPR study

Molecular weight (MW) and configurational stabilities of a series of high-cis poly[(2,4-difluorophenyl)acetylene]s (PdFPhA, M_w from 2.2 × 10⁴ to 9.7 × 10⁵) exposed to the atmosphere and diffuse daylight are reported. Polymers dissolved in THF-d₈ undergo simultaneous cis-to-trans isomerization and degradation under formation of a bimodal MW distribution. Degradation and isomerization rates are tightly connected and decrease with decreasing MW of the parent PdFPhAs. This finding may be interesting for the functional applications of substituted polyacetylenes. The partly aged PdFPhAs contain two separable fractions: higher-MW high-cis macromolecules containing a low amount of unpaired electrons and lower-MW deeply isomerized cis/trans macromolecules enriched in the unpaired electrons content. The difference in MW of these fractions reflects the various degradation rates of isomerized and high-cis macromolecules. Only a slow degradation without changes in the configurational structure proceeds if PdFPhA is allowed to age in the solid state. The suppression of the cis-to-trans isomerization reflects the suppression of motion of the polymer chains segments in the solid state.     

Multivalent interaction of cyclodextrin vesicles, carbohydrate guests, and lectins: a kinetic investigation

An artificial glycocalix self-assembles when unilamellar bilayer vesicles of amphiphilic β-cyclodextrins are decorated with maltose- and lactose-adamantane conjugates by host-guest interactions. The maltose-decorated vesicles aggregate in the presence of lectin concanavalin A whereas the lactose-decorated vesicles aggregate in the presence of lectin peanut agglutinin. The kinetics of the orthogonal multivalent interfacial interactions present in this ternary system of vesicles, carbohydrates, and lectins were studied by time-dependent measurements of the optical density at 400 nm. The average vesicle and vesicle aggregate sizes were monitored by dynamic light scattering. The aggregation process was evaluated as a function of lectin concentration, vesicle concentration, and surface coverage of the vesicles by the carbohydrate-adamantane conjugates. The initial rate of vesicle aggregation scales linearly with the lectin as well as the cyclodextrin vesicle concentration. Furthermore, each lectin requires a characteristic critical density of carbohydrates at the vesicle surface. These observations allow a prediction of the response of the ternary supramolecular system at different concentrations of its components. Also, the effective binding site separation in a multivalent receptor such as a multiple binding site protein can be accurately determined. This methodology can be extended to multivalent noncovalent interactions in other ligand-receptor systems at interfaces.     

ITC and NMR analysis of the encapsulation of fatty acids within a water-soluble cavitand and its dimeric capsule

We report here NMR and Isothermal Titration Calorimetry studies of the binding of ionisable guests (carboxylate acids) to a deep-cavity cavitand. These studies reveal that the shortest guests favoured 1:1 complex formation, but the longer the alkyl chain the more the 2:1 host-guest capsule is favoured. For intermediate-sized guests, the equilibrium between these two states is controlled by pH; at low values the capsule containing the carboxylic acid guest is favoured, whereas as the pH is raised deprotonation of the guest favours the 1:1 complex. Interestingly, for one host–guest pair the energy required to decap the 2:1 capsular complex and form the 1:1 complex is sufficient to shift the pK_a of the guest by ~3–4 orders of magnitude (4.1–5.4 kcal mol^?1). The two largest guests examined form stable 2:1 capsules, with in both cases the guest adopting a relatively high energy J-shaped motif. Furthermore, these 2:1 complexes are sufficiently stable that at high pH guest deprotonation occurs without decapping of the capsule.     

Characterization of a chiral stationary phase by HR/MAS NMR spectroscopy and investigation of enantioselective interaction with chiral ligates by transferred NOE

The surface chemistry of a chiral stationary phase (CSP) with a (tert-butyl carbamoyl) quinine selector immobilized on thiol-modified silica has been characterized by (1)H HR/MAS NMR and (29)Si CP/MAS NMR spectroscopy. The mostly well-resolved (1)H signals could be assigned to stem from the surface-bound selector and the latter suggested a bi- and trifunctional silane linkage. Suspended-state NMR spectroscopy thus proved a well-characterized surface chemistry as proposed. To study chiral recognition phenomena in the presence of the CSP, (1)H HR/MAS 2D transfer NOESY investigations in methanol-d(4) have been undertaken with various solutes including N-3,5-dinitrobenzoyl derivatives of leucine (DNB-Leu) and N-acetyl phenylalanine (Ac-Phe). Both (R)- and (S)-enantiomers of DNB-Leu and Ac-Phe interacted with the tBuCQN-CSP as indicated by negative cross-peaks in the trNOESY spectra, while the 2D NOESY of the dissolved solutes in absence of the chiral stationary phase showed positive cross-peaks. The intensities of the trNOE cross-peaks were much stronger for the (S)-enantiomers. This stereoselectivity paralleled the experimental chromatographic behavior, where the (S)-enantiomers revealed stronger binding and retention on the tBuCQN-CSP as well. Hence, we were able to correlate the retention behavior to the trNOE NMR spectroscopic data in a qualitative manner.     

PEGMA/MMA copolymer graftings: generation, protein resistance, and a hydrophobic domain

We synthesized various graft copolymer films of poly(ethylene glycol) methacrylate (PEGMA) and methyl methacrylate (MMA) on silicon to examine the dependency of protein-surface interactions on grafting composition. We optimized atom transfer radical polymerizations to achieve film thicknesses from 25 to 100 nm depending on the monomer mole fractions, and analyzed the resulting surfaces by X-ray photoelectron spectroscopy (XPS), ellipsometry, contact angle measurements, and atomic force microscopy (AFM). As determined by XPS, the stoichiometric ratios of copolymer graftings correlated with the concentrations of provided monomer solutions. However, we found an unexpected and pronounced hydrophobic domain on copolymer films with a molar amount of 10-40% PEGMA, as indicated by advancing contact angles of up to 90 degrees . Nevertheless, a breakdown of the protein-repelling character was only observed for a fraction of 15% PEGMA and lower, far in the hydrophobic domain. Investigation of the structural basis of this exceptional wettability by high-resolution AFM demonstrated the independence of this property from morphological features.     

Surfactant addition effects on dispersion and microdomain orientation in SBS triblock copolymer/alumina nanoparticle composites

The aim of this study was to investigate the effects of surfactant addition on the dispersion of 1–3 wt.% alumina nanoparticles on the self-assembled morphology of poly(styrene-b-butadiene-b-styrene) (SBS) linear triblock copolymer. The neat triblock copolymer microphase separated into PS cylinders self-assembled on a hexagonal array in the PB matrix, being the orientation of domains dependent on the annealing conditions. UV–vis and AFM analyses showed an improvement on dispersion of Al₂O₃ nanoparticles into SBS matrix by adding dodecanethiol as organic surfactant, due to its miscibility with PS block. Interactions between surfactant-coated Al₂O₃ nanoparticles with PS block were demonstrated by the variation on the glass transition temperature of this block. AFM analysis showed that the incorporation of surfactant-coated Al₂O₃ nanoparticles in the SBS matrix have great influence on the orientation of microphase separated domains in SBS nanocomposites.     

Investigation of perfluorosulfonic acid ionomer solutions by 19f NMR and DLS: Establishment of an accurate quantification protocol

Long side chain perfluorosulfonic acid (PFSA) aqueous solutions with various degrees of substitution and trifluoroacetic acid solutions were investigated by liquid ¹⁹F nuclear magnetic resonance (NMR) to propose a new and efficient quantification protocol. These two examples were selected to respond to a specific need for quantification in fuel cell applications. Classical quantification revealed a systematic underestimation of the PFSA concentrations at room temperature, in contrast to small fluorinated molecules. Dynamic light scattering data suggested the presence of “NMR silent aggregates” up to 50 °C. These aggregates appeared as large particles of about 30 µm in diameter, resulting from the agglomeration of primary aggregates through hydrogen bonds. An increase of the measurement temperature to 80 °C was sufficient to take apart the secondary aggregates, and get the correct quantification. In parallel, a rapid ¹⁹F NMR quantification method was developed using a careful analysis of the Signal‐to‐Noise ratio. This new method provided, in at least a six decades range, an estimation of the PFSA concentration without the need for an external reference. This approach may be successfully applied to determine the fluorine atom content of any small molecule or polymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2210–2222     

Biocompatible and biodegradable copolymer stabilizers for hydrofluoroalkane dispersions: a colloidal probe microscopy investigation

In this work we investigate the ability of biodegradable and biocompatible lactide-based nonionic amphiphiles to stabilize a model drug (salbutamol base) dispersion in hydrofluoroalkane (HFA) propellant. A series of triblock copolymers of the type poly(lactide)-poly(ethylene glycol)-poly(lactide) (LA(m)EO(n)LA(m)) with varying molecular weight (MW) and % EO were synthesized. The cohesive forces between drug particles in liquid HFA in the presence of the amphiphiles were quantitatively determined by colloidal probe microscopy (CPM). The effect of cosolvent, oleic acid, and a nonionic triblock copolymer with the propylene oxide moiety as the HFA-phile was also investigated. CPM results show that the overall concentration, MW, surfactant tail (LA) length, and the ratio between the stabilizing LA moiety and the anchor EO group have a great impact on the drug cohesive forces. The CPM results in liquid HFA were correlated to the bulk physical stability of the drug suspensions in the propellant 1,1,1,2,3,3,3-heptafluoropropane (HFA227). The dispersions in HFA227 were significantly improved in the presence of LA(m)EO(n)LA(m), correlating well with the low cohesive forces determined by CPM. The applicability of LA-based amphiphiles might be extended to other suspension-based formulations provided a suitable headgroup is found. This study is relevant for the development of HFA-based dispersion pressurized metered-dose inhaler formulations.     

Palladium catalysed alkyne hydrogenation and oligomerisation: a parahydrogen based NMR investigation

The role phosphine ligands play in the palladium(ii)-bis-phosphine-hydride cation catalysed hydrogenation of diphenylacetylene is explored through a PHIP (parahydrogen induced polarization) NMR study. The precursors Pd(LL')(OTf)(2) () [LL' = dcpe (PCy(2)CH(2)CH(2)PCy(2)), dppe, dppm, dppp, cppe (PCy(2)CH(2)CH(2)PPh(2))] are used. Alkyl palladium intermediates of the type [Pd(LL')(CHPhCH(2)Ph)](OTf) ( and ) are detected and demonstrated to play an active role in hydrogenation catalysis. Magnetization transfer experiments reveal chemical exchange from the alpha-H of the alkyl ligand of (LL' = dcpe) and linkage isomer ' (LL' = cppe) into trans-stilbene on the NMR timescale. Activation parameters (DeltaH( not equal) and DeltaS( not equal)) for this transformation have been determined. These experiments, coupled with GC/MS data, indicate that the catalytic activity is greater in methanol, where it follows the order: dcpe > cppe > dppp > dppe > dppm, than in CD(2)Cl(2). All five of the phosphine systems described are less active than those based on bcope [where bcope is (C(8)H(14))PCH(2)-CH(2)P(C(8)H(14))] and (t)bucope [where (t)bucope is (C(8)H(14))PC(6)H(4)CH(2)P((t)Bu)(2)]. cis, cis-1,2,3,4-Tetraphenyl-buta-1,3-diene is detected as a minor reaction product with Pd(LL')(PhCH-CHPh-CPh[double bond, length as m-dash]CHPh)(+) () also being shown to play a role in the alkyne dimerisation step.     

Regio- and stereoselective lithiation of 2,3-diphenylaziridines: a multinuclear NMR investigation

The alpha-lithiation-trapping sequence of trans-N-alkyl-2,3-diphenylaziridines (s-BuLi or s-BuLi/TMEDA), taking place with a stereochemistry which dramatically depends on the solvent coordinating ability (inversion of configuration in THF and retention in toluene), has been carefully investigated. 1H,13C, and 7Li multinuclear NMR investigations at low temperature suggest that two differently configured lithiated aziridines (monomeric cis-1-Li in THF and dimeric trans-1-Li in toluene) are involved.     

Investigation of the Mechanism of Colloidal Silicalite‐1 Crystallization by Using DLS,SAXS, and 29Si NMR Spectroscopy

Colloidal silicalite‐1 zeolite was crystallized from a concentrated clear sol prepared from tetraethylorthosilicate (TEOS) and aqueous tetrapropylammonium hydroxide (TPAOH) solution at 95 °C. The silicate speciation was monitored by using dynamic light scattering (DLS), synchrotron small‐angle X‐ray scattering (SAXS), and quantitative liquid‐state ²⁹Si NMR spectroscopy. The silicon atoms were present in dissolved oligomers, two discrete nanoparticle populations approximately 2 and 6 nm in size, and crystals. On the basis of new insight into the evolution of the different nanoparticle populations and of the silicate connectivity in the nanoparticles, a refined crystallization mechanism was derived. Upon combining the reagents, different types of nanoparticles (ca. 2 nm) are formed. A fraction of these nanoparticles with the least condensed silicate structure does not participate in the crystallization process. After completion of the crystallization, they represent the residual silicon atoms. Nanoparticles with a more condensed silicate network grow until approximately 6 nm and evolve into building blocks for nucleation and growth of the silicalite‐1 crystals. The silicate network connectivity of nanoparticles suitable for nucleation and growth increasingly resembles that of the final zeolite. This new insight into the two classes of nanoparticles will be useful to tune the syntheses of silicalite‐1 for maximum yield.