The first homoleptic bis(trifluoromethanesulfonyl)amide complex compounds of trivalent f-elements

The synthesis and crystal structures of the first true homoleptic bis(trifluoromethanesulfonyl)amide complex compounds of trivalent f-elements are reported with [bmpyr]2[Ln(Tf2N)5], Ln = Nd, Tb and [bmpyr][Ln(Tf2N)4], Ln = Tm, Lu.     

Suzuki coupling catalyzed by a homoleptic Pd(I)-Pd(I) solvento complex

The Pd^I-Pd^I bonded complex [Pd₂(CH₃CN)₆][SbF₆]₂ is catalytically active towards Suzuki cross-coupling reactions of aryl bromides or chlorides with various arylboronic acids under mild conditions giving good to excellent yields. Its performance is enhanced by the introduction of stoichiometric or limited phosphines. The effects of different ligands, metal oxidation states [Pd(II), Pd(I) Pd(0)], bases and solvents have been examined.     

The first acetimine gold(I) and gold(III) complexes and the first acetonine complexes

Ketimino(phosphino)gold(I) complexes of the type [Au[NR=C(Me)R']L]X (X = ClO4, R = H, L = PPh3, R'=Me (la), Et (2a); L=PAr3 (Ar=C6H4OMe-4), R'=Me (1b), Et (2b); L=PPh3, R=R'=Me (3); X= CF3SO3 (OTf), L=PPh3, R=R'=Me (3'); R=Ar, R'=Me (4)) have been prepared from [Au(acac)L] (acac = acetyl acetonate) and ammonium salts [RNH3]X dissolved in the appropriate ketone MeC(O)R'. Complexes [Au(NH=CMe2)2]X (X = C1O4 (6), OTf (6')) were obtained from solutions of [Au(NH3)2]X in acetone. The reaction of 6 with PPN[AuCl2] or with PhICl2 gave [AuCl(NH=CMe2)] (7) or [AuCI2(NH=CMe2)2]ClO4 (8), respectively. Complex 7 was oxidized with PhICl2 to give [AuCl3(NH=CMe2)] (9). The reaction of [AuCl(tht)] (tht = tetrahydrothiophene), NaClO4, and ammonia in acetone gave [Au(acetonine)2]ClO4 (10) (acetonine = 2,2,4,4,6-pentamethyl-2,3,4,5-tetrahydropyrimidine) which reacted with PPh3 or with PPN[AuCl2] to give [Au(PPh3)(acetonine)]ClO4 (11) or [AuCl(acetonine)] (12), respectively. Complex 11 reacts with [Au(PPh3)(Me2CO)]ClO4 to give [(AuPPh3)2(mu-acetonine)](ClO4)2 (13). The reaction of AgClO4 with acetonine gave [Ag(acetonine)(OClO3)] (14). The crystal structures of [Au(NH2Ar)(PPh3)]OTf (5), 6' and 10 have been determined.     

The first structurally characterised homoleptic sigma-organotitanium(III) compound

The paramagnetic [EPR, S = 1/2, d1; gav = 1.959(2)] organotitanate(III) anion [TiIII(C6Cl5)4] has been found to be a mononuclear species with nearly tetrahedral geometry (X-ray).     

The first structurally characterised homoleptic organovanadium(III) compound

The homoleptic, tetrahedral, paramagnetic d2 species [NBu4][VIII(C6Cl5)4] 1 has been obtained and characterised by analytical, spectroscopic and X-ray diffraction methods.     

Intensely luminescent homoleptic alkynyl decanuclear gold(I) clusters and their cationic octanuclear phosphine derivatives

Treatment of Au(SC(4)H(8))Cl with a stoichiometric amount of hydroxyaliphatic alkyne in the presence of NEt(3) results in high-yield self-assembly of homoleptic clusters (AuC(2)R)(10) (R = 9-fluorenol (1), diphenylmethanol (2), 2,6-dimethyl-4-heptanol (3), 3-methyl-2-butanol (4), 4-methyl-2-pentanol (4), 1-cyclohexanol (6), 2-borneol (7)). The molecular compounds contain an unprecedented catenane metal core with two interlocked 5-membered rings. Reactions of the decanuclear clusters 1-7 with gold-diphosphine complex [Au(2)(1,4-PPh(2)-C(6)H(4)-PPh(2))(2)](2+) lead to octanuclear cationic derivatives [Au(8)(C(2)R)(6)(PPh(2)-C(6)H(4)-PPh(2))(2)](2+) (8-14), which consist of planar tetranuclear units {Au(4)(C(2)R)(4)} coupled with two fragments [AuPPh(2)-C(6)H(4)-PPh(2)(AuC(2)R)](+). The titled complexes were characterized by NMR and ESI-MS spectroscopy, and the structures of 1, 13, and 14 were determined by single-crystal X-ray diffraction analysis. The luminescence behavior of both Au(I)(10) and Au(I)(8) families has been studied, revealing efficient room-temperature phosphorescence in solution and in the solid state, with the maximum quantum yield approaching 100% (2 in solution). DFT computational studies showed that in both Au(I)(10) and Au(I)(8) clusters metal-centered Au → Au charge transfer transitions mixed with some π-alkynyl MLCT character play a dominant role in the observed phosphorescence.     

The first bis-Rh(I) metal complex of N-confused porphyrin

An inner- and outer-N coordinated bis-Rh(I) metal complex was obtained from the reaction of N-confused porphyrin and [Rh(CO)2Cl]2 in CH2Cl2 and the structure was confirmed by a single crystal X-ray analysis.     

A homoleptic phosphine adduct of Tl(I)

A homoleptic phosphine adduct of thallium(I) supported by a tris(phosphino)borate ligand has been isolated and structurally characterized.     

A homoleptic hydrotris(methimazolyl)borate complex of titanium

The reaction of [Ti(2)(micro-Cl)(2)(thf)(2)(eta-C(8)H(8))(2)] with Na[HB(mt)(3)] (mt = methimazolyl) provides the unusual salt [Ti{HB(mt)(3)}(2)][TiCl(4)(thf)(2)], the cation of which features homoleptic Ti(III)S(6) coordination.     

The first stereochemically nonrigid monomeric two-coordinate copper(I) complexes with homoleptic and heteroleptic "N2" donor set

A novel set of stereochemically nonrigid monomeric two-coordinate copper(I) complexes, [Cu(eta(1)-H(2)CPz'(2))(2)]ClO(4) 1, [Cu(HPz')(2)]ClO(4) 2, and [Cu(HPz')(eta(1)-H(2)CPz'(2))]ClO(4) 3, where Pz' = 3,5-di-tert-butylpyrazolyl, has been synthesized and characterized by X-ray diffraction and variable-temperature (1)H NMR spectroscopy. Based on the (1)H NMR line shape analysis of complexes 1 and 2, the intramolecular fluxional process was proposed for these two-coordinate copper(I) complexes. Also, the mixed ligand complex 3 shows that these two different dynamic binding modes of the coordinated HPz' and H(2)CPz'(2) ligands can proceed simultaneously on a single copper(I) ion.     

Highly luminescent gold(I)-silver(I) and gold(I)-copper(I) chalcogenide clusters

The reactions of [AuClL] with Ag(2)O, where L represents the heterofunctional ligands PPh(2)py and PPh(2)CH(2)CH(2)py, give the trigoldoxonium complexes [O(AuL)(3)]BF(4). Treatment of these compounds with thio- or selenourea affords the triply bridging sulfide or selenide derivatives [E(AuL)(3)]BF(4) (E=S, Se). These trinuclear species react with Ag(OTf) or [Cu(NCMe)(4)]PF(6) to give different results, depending on the phosphine and the metal. The reactions of [E(AuPPh(2)py)(3)]BF(4) with silver or copper salts give [E(AuPPh(2)py)(3)M](2+) (E=O, S, Se; M=Ag, Cu) clusters that are highly luminescent. The silver complexes consist of tetrahedral Au(3)Ag clusters further bonded to another unit through aurophilic interactions, whereas in the copper species two coordination isomers with different metallophilic interactions were found. The first is analogous to the silver complexes and in the second, two [S(AuPPh(2)py)(3)](+) units bridge two copper atoms through one pyridine group in each unit. The reactions of [E(AuPPh(2)CH(2)CH(2)py)(3)]BF(4) with silver and copper salts give complexes with [E(AuPPh(2)CH(2)CH(2)py)(3)M](2+) stoichiometry (E=O, S, Se; M=Ag, Cu) with the metal bonded to the three nitrogen atoms in the absence of AuM interactions. The luminescence of these clusters has been studied by varying the chalcogenide, the heterofunctional ligand, and the metal.     

Thin-film oxygen sensors using a luminescent polynuclear gold(I) complex

Robust thin-film oxygen sensors were fabricated by encapsulating a lipophilic, polynuclear gold(I) complex, bis{m-(bis(diphenylphosphino)octadecylamine-P,P′)}dichlorodigold(I), in oxygen permeable polystyrene and ormosil matrices. Strong phosphorescence, which was quenched by gaseous and dissolved oxygen, was observed from both matrices. The polystyrene encapsulated dye exhibited downward-turning Stern–Volmer plots which were well fitted by a two-site model. The ormosil trapped complex showed linear Stern–Volmer plots for dissolved oxygen quenching but was downward turning for gaseous oxygen. No leaching was observed when the ormosil based sensors were immersed in flowing water over an 8 h period. Both films exhibited fully reversible response and recovery to changing oxygen concentration with rapid response times.     

Seed free high yield gold nanorods synthesis from single precursor gold(I) dithiophosphate complex

In this work, we demonstrate a simple, one pot and seed free synthetic route for the formation of gold nanorods (Au NRs) via thermal decomposition of gold(I) dithiophosphate {[Au₂{S₂P(OⁱPr)₂}₂]_n,} 1 complex as a molecular precursor in presence of 4′‐amino‐biphenyl‐4‐carboxylic molecule. Here [Au₂{S₂P(OⁱPr)₂}₂]_n, complex functioned as gold (Au) source and 4′‐amino‐biphenyl‐4‐carboxylic molecule stabilized gold (Au) nanorods (NRs) through the unidirectional coating of Au surface during its growth in the reaction medium.     

A neutral tungsten-eta2-alkyne-1-thio ligand forming a homoleptic Werner type complex with Cu(I)

The 1-thio-eta2-alkyne-complex [Tp'(CO)2W(BnSCCS)][Tp'= hydrotris(3,5-dimethylpyrazolyl)borate; Bn = benzyl], which was obtained by reductive removal of the benzyl group at the alkyne complex [Tp'(CO)2W(BnSCCSBn)]PF(6), has been established as a ligand in a combined organometallic/Werner type heterobimetallic complex with Cu(I).     

Interlocked catenane-like structure predicted in Au24(SR)20: implication to structural evolution of thiolated gold clusters from homoleptic gold(I) thiolates to core-stacked nanoparticles

Atomic structure of a recently synthesized ligand-covered cluster Au(24)(SR)(20) [J. Phys. Chem. Lett., 2010, 1, 1003] is resolved based on the developed classical force-field based divide-and-protect approach. The computed UV-vis absorption spectrum and powder X-ray diffraction (XRD) curve for the lowest-energy isomer are in good agreement with experimental measurements. Unique catenane-like staple motifs are predicted for the first time in core-stacked thiolate-group (RS-) covered gold nanoparticles (RS-AuNPs), suggesting the onset of structural transformation in RS-AuNPs at relatively low Au/SR ratio. Since the lowest-energy structure of Au(24)(SR)(20) entails interlocked Au(5)(SR)(4) and Au(7)(SR)(6) oligomers, it supports a recently proposed growth model of RS-AuNPs [J. Phys. Chem. Lett., 2011, 2, 990], that is, Au(n)(SR)(n-1) oligomers are formed during the initial growth of RS-AuNPs. By comparing the Au-core structure of Au(24)(SR)(20) with other structurally resolved RS-AuNPs, we conclude that the tetrahedral Au(4) motif is a prevalent structural unit for small-sized RS-AuNPs with relatively low Au/SR ratio. The structural prediction of Au(24)(SR)(20) offers additional insights into the structural evolution of thiolated gold clusters from homoleptic gold(I) thiolate to core-stacked RS-AuNPs. Specifically, with the increase of interfacial bond length of Au(core)-S in RS-AuNPs, increasingly larger "metallic" Au-core is formed, which results in smaller HOMO-LUMO (or optical) gap. Calculations of electronic structures and UV-vis absorption spectra of Au(24)(SR)(20) and larger RS-AuNPs (up to ~2 nm in size) show that the ligand layer can strongly affect optical absorption behavior of RS-AuNPs.     

Dynamic 13C NMR studies of ligand exchange in linear (d10) silver(I) and gold(I) and square-planar (d8) rhodium(I) homoleptic metal carbonyl cations in superacidic media

The dynamic CO exchange of the monovalent metal carbonyl cations [Ag(13CO)]+, [Au(13CO)2]+-Au(13CO) SO3F and [Rh(12CO)4-x(13CO)x]+ (x < or = 1) in superacidic solutions was studied by variable-temperature 13C NMR methods. The exchange rates are strongly dependent on the acidity of the solvent, the concentration of metal carbonyl cations and temperature. Whereas a suitable exchange rate of the Ag(I) system is only accessible in magic acid (HSO3F-SbF5), the more stable Au(I) and Rh(I) systems were studied in the less acidic fluorosulfuric acid. Selected solutions of Ag(I), Rh(I) and Au(I) yielded activation barriers deltaG* of 42.7, 43.5, and 56.2 kJ mol(-1) respectively.     

A monomeric gold(I) carbanion complex with an uncoordinated thioether: [2‐(methylsulfanyl)phenyl](triphenylphosphine)gold(I)

The title compound, [Au(C₇H₇S)(C₁₈H₁₅P)], is conformationally chiral and crystallizes from benzene–hexane as individually enantiopure crystals. This mononuclear compound has the Au^I atom linearly bound to a triphenylphosphine P atom and to a phenyl C atom of a 2‐(methylsulfanyl)phenyl group. The angle at the Au^I atom is 175.9 (2)°. The linear ligand coordination about the Au^I atom has geometric parameters inside the remarkably narrow range found for gold complexes bound by a phosphine ligand and by the ortho‐C atom of a substituted phenyl group. This is the first example of gold(I) attached to a methylsulfanyl aromatic carbanion.