Simultaneous determination of butyltin and phenyltin species in sediments using ultrasound-assisted leaching

A fast and simple procedure is presented for the simultaneous leaching of butyl (mono, di and tributyl) and phenyl organotin species from sediment samples. Leached compounds are further ethylated with sodium tetraethylborate in aqueous medium, and analyzed by gas chromatography. After testing the stability of triphenyltin under different extraction conditions, ultrasound-assisted leaching at room temperature in the presence of acetic acid was been proposed as an extraction procedure compatible with the simultaneous determination of phenyl- and butyltin compounds in sediments. Recoveries between 70 and 90% were obtained for phenyl species in spiked samples prepared in the laboratory. Results for butyltin species were validated by use of the reference material PACS-2. Quantification limits, using GC-MIP-AES as measurement technique, were approximately 5-10 ng g(-1). Precision in the consecutive analysis of three sediment samples varied between 3 and 10%.     

Simultaneous determination of butyltin and phenyltin compounds in oysters by capillary gas chromatography

A method is described for the simultaneous determination of butyl- and phenyltin compounds in oyster samples. The organotin compounds were extracted (as chlorides) from oyster homogenates with hydrochloric acid and benzene in the presence of 0.05% tropolone. These compounds were converted into pentyl derivatives with pentyl Grignard reagent and then analysed by capillary gas chromatography with a flame photometric detector equipped with a 393-nm filter. The recoveries of six organotin compounds added to oyster samples ranged from 71 to 74%. The detection limits of butyl- and phenyltin compounds were in the 5-9 pg range as tin. We detected significant amounts of three organotin compounds (di- and tributyltin and triphenyltin) in oyster samples.     

Simultaneous speciation of butyltin and phenyltin compounds in the waters of south-west Spain.

An analytical method for the simultaneous speciation of butylin and phenyltin compounds has been applied to a study of the water quality in six locations (rivers and sea) in South West Spain. It was not intended to provide a comprehensive survey of the area but to establish what the maximum levels might be for a subsequent and more detailed study. Phenyltin species were not found in any sample, however tributyltin was present (100-400 ng l-1) in the Cadiz Bay samples, which suggests that the biological water quality may sometimes be depressed. Wherever tributyltin was present, dibutyltin and monobutyltin occurred, possibly, as a result of a degradation process.     

Determination of butyltin and phenyltin species by reversed-phase liquid chromatography and fluorimetric detection

Chromatographic separation of monobutyltin (MBT), monophenyltin (MPhT), dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT) and triphenyltin (TPhT) was studied using end-capped reversed-phases (RP) and methanol-acetic acid-water or acetronitrile-acetic acid-water mixtures as mobile phases. Several RP columns were evaluated, and the effect of acetic acid, oxalic acid, triethylamine, and organic modifier on peak shape and retention was examined. A method based on gradient elution RPLC and fluorimetric detection is proposed for the determination of DBT, DPhT, TBT and TPhT. The sensitivity of the method makes it suitable for environmental analysis.     

Separation of butyltin and phenyltin species by ion-exchange chromatography with complexing mobile phases

Summary Butyltin and phenyltin species have been separated by ion-exchange chromatography using silica-based and polymer-based columns. Mobile phases consisted of methanol-water mixtures containing polyfunctional carboxylic acids, which can act as complexing agents for organotin species. The best results were achieved with a system based on a methanol mobile phase containing malic and oxalic acids and a polymer-based column, which allowed the separation of tri- and diorganotin compounds and some resolution between monobutyltin and monophenyltin.     

Electrothermal atomic absorption spectrometric determination of germanium in soils using ultrasound-assisted leaching

A procedure for determining germanium in soil samples using electrothermal atomic absorption spectrometry is discussed. The analyte is leached from the solid sample by the addition of 1 ml of concentrated hydrofluoric acid to 10-300 mg of sample, and the mixture is then submitted to a 10 min ultrasonic treatment. After adding 0.4 g boric acid and 3 ml concentrated hydrochloric acid, germanium is extracted into 1 ml chloroform and back-extracted into an aqueous phase containing (0.05%, w/v) nickel nitrate. Ten micro liter of aqueous phase are introduced into the atomizer and the analytical signal from germanium is obtained using a fast-heating cycle. The detection limit, calculated using three times the standard error of estimate (s_y/x) of the calibration graph, is 0.015 μg g⁻¹. The reliability of the procedure is verified by analyzing several certified reference materials.     

Toxicity of butyltin,phenyltin and inorganic tin compounds to sulfate‐reducing bacteria isolated from anoxic marine sediments

The toxicity of butyltin, phenyltin and inorganic tin compounds to three pure strains of sulfate‐reducing bacteria (SRB), isolated from a tributyltin (TBT)‐polluted sediment, was determined. The isolated strains were identified as belonging to the genus Desulfovibrio. A new toxicological index (GR₂₅) was developed to assay the toxicity of organotin compounds. Deleterious effects on suspended anaerobic cell cultures were observed for concentrations ranging between 500 and 600 µM for tin tetrachloride, 55 and 260 µM for triorganotins, 30 and 90 µM for diorganotins, and 1 and 6 µM for mono‐organotins. Whereas the number of substituents influenced the toxicity of organotins, the type of substituent (butyl or phenyl) proved to have little or no impact. Trisubstituted compounds (tributyl‐ and triphenyl‐tin) were less toxic to these strains of SRB than the monosubstituted forms (monobutyl‐ and monophenyl‐tin). This is the opposite trend to that currently reported for aerobic organisms. Under the given anoxic conditions, the toxicity of organotin compounds obtained yielded a significant negative correlation with the total surface area (TSA) of the tested molecules. Comparison of the TBT toxicity data observed for different microbial groups suggests that the tolerance of bacteria to organotin compounds might be related to organotin–cell wall interactions as well as to aerobic or anaerobic metabolise pathways. Copyright © 2000 John Wiley & Sons, Ltd.     

A simplified procedure for the determination of butyltin species in water

A method is described for the analysis of solutions containing inorganic tin and butyltin compounds. It can be used to determine total tin at a concentration of 20 ng dm^?3 using a 5 dm³ sample. The method is based on solvent extraction with dichloromethane containing tropolone and determination of the tin as inorganic tin by atomic absorption spectroscopy using electrothermal atomization. The extracted butyltin compounds can be separated by paper chromatography and the tin content of the individual spot determined as above. Observations on the stability of butyltin compounds in water at the ～2 mg dm^?3 (Sn) are included.     

Determination of butyltin compounds in sediments using an improved aqueous ethylation method

We have determined tributyltin and dibutyltin species in various environmental sediment samples (marine, harbour and river sediment) using the in situ aqueous ethylation-gas chromatography-atomic absorption spectrometry method subsequent to extraction by methanol containing O.5M HCl. The present technique provides a significantly lower detection limit than previous methods, so that tributyltin can for the first time be measured in some of the samples. Thus, the method described is well suited for the determination of tributyltin and dibutyltin compounds in sediments with low levels of butyltin species (e.g., Main River, 1.7 ng of tributyltin as Sn/g dry sediment).     

GC FPD method for the simultaneous speciation of butyltin and phenyltin compounds in waters

A method is described for the simultaneous determination of nanogram amounts of mono-, di- and tri-butyltin compounds in water. The procedure is based on the conversion of tin compounds to volatile species by Grignard pentylation and analysis using GC with flame photometric detection (GC FPD). The ionic compounds are extracted from diluted acidified (HBr) aqueous solutions by using a pentane-tropolone solution. The extracted organotin compounds are pentylated by a Grignard reagent and purified on a Fluorisil column before analysis by GC FPD. The detection limits are 20 ng dm^?3 for butyltin compounds and 50 ng dm^?3 for phenyltin compounds. Recoveries from spiking experiments in tap-water and natural seawater matrices, in which no organotin compounds were detected, were greater than 90% for most of the alkyltin compounds.     

离子色谱-等离子体质谱联用测定热泉水样的砷形态

利用阴离子色谱与六极碰撞等离子体质谱联用的方法,在线同时测定水样的4种砷形态(As(Ⅴ),As(Ⅲ),MMA,DMA),并用于实际样品-热泉水中砷形态的测定.使用K2HPO4-KH2PO4为淋洗液等度淋洗,用Hamilton PRP-X100阴离子色谱柱分离,4种砷形态在7 min之内完全分离.调节淋洗液中K2HPO4与KH2PO4的比例可以优化峰的分离.地下水(含热泉水)基质、样品及淋洗液中的Cl-对砷形态的分离测定没有影响,淋洗液中的盐份在样品锥和截取锥上的积累对测定的影响很小.检出限分别为As(Ⅴ) 0.23 μg/L,As(Ⅲ) 0.30 μg/L,MMA 0.26 μg/L,DMA 0.54 μg/L.     

Simultaneous determination of organic ionic lead and mercury species using HPLC

A reversed-phase HPLC separation of organic ionic lead and mercury species has been achieved by using pre and on-column derivatisation with methyl thioglycolate. The separation parameters have been optimized and shown to permit a reproducible determination. For the enrichment of the compounds from water samples, the complexed organometallic species are concentrated on a precolumn. A recovery of 70 to 80% is achieved by using this one-line enrichment method.     

Simultaneous voltammetric determination of toxic metals in sediments

Voltammetric methods are very suitable, versatile and rapid techniques for the simultaneous metal determination in complex matrices. The work, regarding the determination of As(III), Se(IV) and Mn(II), is a very interesting example of the possibility for simultaneously determining each single element in real samples in a wide range of concentration ratios. The differential pulse (DPV) measurements were carried out using a conventional three-electrode cell, while ammonia-ammonium chloride buffer (pH 9.6) was employed as the supporting electrolyte. The analytical procedure was verified by the analyses of standard reference materials: estuarine sediment BCR-CRM 277 and river sediment BCR-CRM 320. Precision and accuracy, expressed as relative S.D. and relative error, respectively, were in all cases of the order of 3-5%, while the detection limit for each element was around 10(-8) M. The standard addition technique improved the resolution of the voltammetric method, even in the case of very high element concentration ratios.     

Simultaneous extraction and determination of anionic surfactants in waters and sediments

A new method has been developed for the simultaneous determination of the most frequently used anionic surfactants - linear alkylbenzene sulfonates (LAS), alkyl ethoxysulfates (AES) and alkyl sulfates (AS) - in aqueous and sediment samples. Preconcentration and purification of water samples are carried out by means of solid-phase extraction (SPE). The efficiency of two different extraction methods for the analysis of sediments - Soxhlet extraction and pressurized liquid extraction (PLE) - has been compared. Identification and quantification of the target compounds is performed using a liquid chromatography - mass spectrometry (LC-MS) system equipped with an electrospray interface (ESI) in negative ion-mode. Homologue recoveries are 85-123% for SPE, 94-112% for Soxhlet extraction and 81-125% for PLE in the case of LAS, and 60-94% for SPE, 61-109% for Soxhlet extraction and 55-99% for PLE in the case of AES, whereas the limits of detection are 0.1-0.5 ngml(-1) in water and 1-5 ngg(-1) in sediment. This method has been applied to the determination of anionic surfactants in the Guadalete estuary (SW Spain), and LAS concentration levels from 538 to 1014 ngg(-1) in sediments and from 25.1 to 64.4 ngml(-1) in waters have been found. AES values from 168 to 536 ngg(-1) in sediments and from 4.5 to 11.9 ngml(-1) in waters are reported for the first time in European rivers.     

Comparison of ultrasound-assisted leaching with conventional and acid bomb digestion for determination of metals in sediment samples

In this paper, a sample preparation method based on ultrasound assisted leaching of Pb, Cu, Zn, Ni and Mn from river and pond sediment samples under ultrasonic effect has been described. Parameters influencing leaching such as sonication time, sample amount, particle size and extractant were fully optimized. Leachatants obtained upon sonication were directly nebulised into an air-acetylene flame for fast metal determination by atomic absorption spectrometry. The best conditions for metal leaching were as follows: a 25 min sonication time, a 0.5 g sample amount (in 25 mL solvent), a particle size < 63 μm and a mixture of concentrated HNO₃-HCIO₄-HF (2:1:1, v/v/v). Analytical results for the five metals by ultrasound-assisted leaching, acid bomb and conventional digestion methods showed a good agreement, thus indicating the possibility of using mild conditions for sample preparation instead of intensive treatments inherent with the digestion methods. In addition, this method reduces the time required for all treatments (leaching or digestion, heating to dryness, cooling and separation) with acid bomb digestion method (from ∼ 8 h to ∼ 1.5 h) and conventional acid digestion method (from ∼ 14 h to ∼ 1.5 h). The accuracy of the method was tested either by comparing obtained results with those of acid bomb and conventional digestion methods or by application on a standard reference materials. The average relative standard deviation of ultrasound assisted leaching method varied between 0.7-1.9% for N = 6, depending on the analyte.     

Speciation of butyl- and phenyltin compounds in sediments using pressurized liquid extraction and liquid chromatography-inductively coupled plasma mass spectrometry

A liquid chromatographic method with inductively coupled plasma mass spectrometry is proposed for the speciation of butyl- (monobutyltin, dibutyltin, tributyltin) and phenyl- (monophenyltin, diphenyltin, triphenyltin) tin compounds in sediments. After evaluation of different additives in the mobile phase, the use of 0.075% (w/v) of tropolone and 0.1% (v/v) of triethylamine in a mobile phase of methanol-acetic acid-water (72.5:6:21.5) allowed the best chromatographic separation of the six compounds. Pressurized liquid extraction (PLE) with a methanolic mixture of 0.5 M acetic acid and 0.2% (w/v) of tropolone was suitable for the quantitative extraction of butyl- and phenyltin compounds with recovery values ranging from 72 to 102%. This analytical approach was compared to conventional solvent extraction methods making use of acids and/or organic solvent of medium polarity. The main advantages of PLE over conventional solvent extraction are: (i) the possibility to extract quantitatively DPhT and MPhT from sediments, which could not be done by a solvent extraction approach; (ii) to preserve the structural integrity of the organotin compounds; (iii) to reduce the extraction time from several hours in case of solvent extraction techniques to just 30 min. For spiked sediments, limits of detection ranged from 0.7 to 2 ng/g of tin according to the compound. The relative standard deviations were found to be between 8 and 15%. The developed analytical procedure was validated using a reference material and was applied to various environmental samples.     

Simultaneous determination of arsenic, selenium and antimony species using HPLC/ICP-MS

A new method for the simultaneous separation and determination of four arsenic species [As(III), As(V), monomethylarsonic acid and dimethylarsinic acid], three selenium species [Se(IV), Se(VI) and selenomethionine] as well as Sb(III) and Sb(V) is presented. The speciation was achieved by on-line coupling of anion exchange high-performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS). Chromatographic parameters such as the composition and pH of the mobile phase were optimised. Limits of detection are below 4.5 μg L^–1 (as element) for Sb(III) and the selenium species and below 0.5 μg L^–1 for the other species. Precisions of retention times were better than 2% RSD and of peak areas better than 8% RSD for all the species investigated.     

Simultaneous determination of arsenic, selenium and antimony species using HPLC/ICP-MS

A new method for the simultaneous separation and determination of four arsenic species [As(III), As(V), monomethylarsonic acid and dimethylarsinic acid], three selenium species [Se(IV), Se(VI) and selenomethionine] as well as Sb(III) and Sb(V) is presented. The speciation was achieved by on-line coupling of anion exchange high-performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS). Chromatographic parameters such as the composition and pH of the mobile phase were optimised. Limits of detection are below 4.5 μg L^–1 (as element) for Sb(III) and the selenium species and below 0.5 μg L^–1 for the other species. Precisions of retention times were better than 2% RSD and of peak areas better than 8% RSD for all the species investigated. Received: 13 January 1999 / Accepted: 4 March 1999     

Simultaneous determination nucleosides in marine organisms using ultrasound-assisted extraction followed by hydrophilic interaction liquid chromatography-electrospray ionization time-of-flight mass spectrometry

A new method has been developed based on ultrasound-assisted extraction (UAE) followed by hydrophilic interaction chromatography (HILIC) and electrospray ionization time-of-flight mass spectrometry (ESI-TOF/MS) for the simultaneous determination of 16 nucleosides and nucleobases in medicinal extracts of various marine organisms. The separation was achieved on a Venusil HILIC column (250×4.6 mm id, 5 μm) and gradient elution using a solution of acetonitrile and buffer (0.20% formic acid and 20 mmol/L ammonium acetate) as the mobile phase. Identification of the 16 target nucleosides and nucleobases was based on the retention time, UV spectra, and mass measurements of the protonated molecules ([M+H](+)) and main fragment ions (ESI-TOF/MS). In addition, non-target compounds of 2'-deoxyinosine and four other amino acids were also tentatively identified by ESI-TOF/MS. The 16 target compounds were quantified by HILIC-ESI-TOF/MS under optimized mass conditions. All calibration curves showed good linearity (r(2)>0.9951). The recoveries were 84.72-124.10%, and the limits of detection of the 16 target compounds were 0.6-130.0 ng/mL. The developed method was applied to quantify the target compounds in 15 batches of various marine organisms. The method has potential applicability for the identification and determination of highly polar and low-concentration active compounds in marine organisms.     

超声辅助分散液液微萃取-高效液相色谱测定水样中的4种邻苯二甲酸酯类增塑剂

建立了采用超声辅助分散液液微萃取技术结合高效液相色谱法(UA-DLLME-HPLC)对4种邻苯二甲酸酯(PAEs)进行富集、检测的方法,并成功应用于实际水样分析。实验中采用富集因子来评价萃取效率,考察并优化了影响萃取效率的主要因素,包括萃取剂类型和用量、分散剂类型和用量、超声时间、离子强度、萃取时间和pH值等。结果表明: 在最佳萃取条件下,该法对4种PAEs（邻苯二甲酸二甲酯、邻苯二甲酸二乙酯、邻苯二甲酸二丁酯和邻苯二甲酸二正辛酯）具有较高的富集能力,富集因子分别为71、144、169和159;检出限分别为3.78、1.77、3.07和3.30 μg/L。对实验室自来水、某品牌矿泉水以及湖水分别加标50、200及500 μg/L的回收率为82.99%～114.47%,相对标准偏差为1.93%～8.31%。该法简便、快速、环保,可以用于测定实际水样中的PAEs类增塑剂。