Redox behavior of $${\text{VO}}^{2 + } / {\text{VO}}_{2}^{ + }$$ as a simulant of $${\text{NpO}}_{2}^{ + } / {\text{NpO}}_{2}^{2 + }$$NpO2+/NpO22+ in boiling nitric acid solution

To evaluate the redox behavior of \({\text{VO}}^{2 + } / {\text{VO}}_{2}^{ + }\) as a simulant of \({\text{NpO}}_{2}^{ + } / {\text{NpO}}_{2}^{2 + }\) in boiling nitric acid solution, i.e., typical operating conditions for nuclear fuel reprocessing plants, oxidation rate measurements for VO²⁺ in boiling and non-boiling nitric acid solutions, thermodynamic calculations, and kinetic calculations were performed. The results indicated that the apparent oxidation rate of VO²⁺ to \({\text{VO}}_{2}^{ + }\) is accelerated by a decrease in \({\text{NO}}_{2}^{ - }\) and HNO₂ concentrations owing to the boiling phenomena of nitric acid solution.     

Study of $${\text{CD}}_{5}^{ + }$$ Ions and Deuterated Variants( $${\text{C}}{{{\text{H}}}_{x}}{\text{D}}_{{(5 - x)}}^{ + }$$ ): An Artefactual Rotation

Russian Journal of Physical Chemistry A - Deuterated methane, $${\text{CD}}_{5}^{ + }$$ , has unusual vibrational and rotational behavior because its three nonequivalent equilibrium structures have...     

Layer-by-layer assembly of Ru3+ and $$ {\text{Si}}_{{\text{8}}} {\text{O}}^{{8 - }}_{{20}} $$ into electrochemically active silicate films

A porous silicate is obtained from octa-anionic cage-like poly-silicate (PS) and Ru³⁺ cations in an ethanol-based layer-by-layer assembly process. Electrochemical experiments (voltammetry and impedance spectroscopy) confirm the formation of redox-active ruthenium centers in the form of hydrous ruthenium oxide throughout the film deposit. Oxidation of Ru(III) to Ru(IV) at a potential below 0.5 V vs saturated Calomel electrode (SCE) is reversible, but a potential positive of 0.5 V vs SCE is associated with an irreversible change in reactivity, which is characteristic for very small hydrous ruthenium oxide nanoparticles. Further voltammetric experiments are performed in aqueous phosphate buffer solutions, and the effects of number of layers, scan rate, and pH are investigated. Three aqueous redox systems are studied in contact with the PS–Ru³⁺ films. The reduction of cationic methylene blue adsorbed onto the negative surface of the nanocomposite silicate is shown to occur, although most of the bound methylene blue appears to be electrochemically inactive either bound to silicate or buried into small pores. The PS–Ru³⁺-catalyzed oxidations of hydroquinone and arsenite(III) are investigated. Scanning electron microscopy images show that a macroscopically uniform porous surface is formed after deposition of 50 layers of the PS–Ru³⁺ nanocomposite. However, atomic force microscopy images demonstrate that in the initial deposition stages, irregular island growth occurs. The average rate of thickness increase for PS–Ru³⁺ nanocomposite films is 6 nm per deposition cycle.     

$$ {{\text{C}}_{\alpha }} - {\text{C}} $$ Bond Cleavage of the Peptide Backbone in MALDI In-Source Decay Using Salicylic Acid Derivative Matrices

The use of 5-formylsalicylic acid (5-FSA) and 5-nitrosalicylic acid (5-NSA) as novel matrices for in-source decay (ISD) of peptides in matrix-assisted laser desorption/ionization (MALDI) is described. The use of 5-FSA and 5-NSA generated a- and x-series ions accompanied by oxidized peptides [M – 2 H + H]⁺. The preferential formation of a- and x-series ions was found to be dependent on the hydrogen-accepting ability of matrix. The hydrogen-accepting ability estimated from the ratio of signal intensity of oxidized product [M – 2 H + H]⁺ to that of non-oxidized protonated molecule [M + H]⁺ of peptide was of the order 5-NSA > 5-FSA > 5-aminosalicylic acid (5-ASA) ≒ 2,5-dihydroxyl benzoic acid (2,5-DHB) ≒ 0. The results suggest that the hydrogen transfer reaction from peptide to 5-FSA and 5-NSA occurs during the MALDI-ISD processes. The hydrogen abstraction from peptides results in the formation of oxidized peptides containing a radical site on the amide nitrogen with subsequent radical-induced cleavage at the \textC_a - \textC {{\text{C}}_{\alpha }} - {\text{C}} bond, leading to the formation of a- and x-series ions. The most significant feature of MALDI-ISD with 5-FSA and 5-NSA is the specific cleavage of the \textC_a - \textC {{\text{C}}_{\alpha }} - {\text{C}} bond of the peptide backbone without degradation of side-chain and post-translational modifications (PTM). The matrix provides a useful complementary method to conventional MALDI-ISD for amino acid sequencing and site localization of PTMs in peptides.     

Sorption Properties of Bulk and Deposited Ammonium Molibdophosphate with Respect to Cs+, Sr2+, and UO 2 2 + $$ {\mathrm{UO}}_2^{2+} $$ Ions

Theoretical and Experimental Chemistry - The sorption of Cs+, Sr2+, and $$ {\mathrm{UO}}_2^{2+} $$ ions on bulk ammonium molibdophosphate (AMP) and also on compositions obtained by its deposition...     

Di storted s-type orbital s: the $${\rm H}^{+}_{2}$$ problem revi sited

On the example of the molecular ion, we show that spherically distorted s-type orbitals possessing angular dependent orbital exponents, even in a minimal basis may lead to total energies the accuracy of which is comparable with the ones obtained by fully numerical (‘complete basis’) calculations.     

Prediction of New $$rm{A^+B^{3+}X_2^{+5}O_7}$$ Compounds

Hitherto unprepared compounds of composition ABX₂O₇ (where A⁺ and B³⁺ are different cations; and X = P⁵⁺, V⁵⁺, As⁵⁺, Nb⁵⁺, Sb⁵⁺, or Ta⁵⁺) are predicted. Criteria are found to predict the possibility for these compounds to crystalize in one of the crystal structure types (KAlP₂O₇, weberite, NaAlP₂O₇, LiFeP₂O₇, or pyrochlore) at room temperature and atmospheric pressure. The prediction is based only on the properties of elements and simple oxides. The average prediction accuracy is at least 88%. The calculations use an information-analytical system (IAS) comprising precedent-based pattern recognition software.     

Synthesis and electrochemical properties of {\text{C}}{{\text{a}}_{{0.9}}}{\text{L}}{{\text{a}}_{{0.1}}}{\text{W}}{{\text{O}}_{{4 + \delta }}} electrolyte for solid oxide fuel cells

$ {\text{C}}{{\text{a}}_{{0.9}}}{\text{L}}{{\text{a}}_{{0.1}}}{\text{W}}{{\text{O}}_{{4 + \delta }}} $ powder was prepared by gel auto-ignition process. According to X-ray diffraction analysis, the resulted $ {\text{C}}{{\text{a}}_{{0.9}}}{\text{L}}{{\text{a}}_{{0.1}}}{\text{W}}{{\text{O}}_{{4 + \delta }}} $ solid solution has tetragonal scheelite structure. Results of electrochemical testing reveal that the performances of La-doped calcium tungstate are superior to that of pure CaWO₄, a conductivity of 5.28?×?10^?3?S?cm^?1 at 800?^??C could be obtained in the $ {\text{C}}{{\text{a}}_{{0.9}}}{\text{L}}{{\text{a}}_{{0.1}}}{\text{W}}{{\text{O}}_{{4 + \delta }}} $ compound sintered at 1,200?^??C. The electrical conductivity as a function of oxygen partial pressure and also the electromotive force of oxygen concentration cell are measured to prove the mainly ionic conductivity of the investigated material.     

Structures and formation of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm 8}} } \right]_{}^{_.^ + } $\end{document} ions

Several \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm\ 8}} } \right]_{}^{_.^ + } $\end{document} ion isomers yield characteristic and distinguishable collisional activation spectra: \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm 1-butene} } \right]_{}^{_.^ + } $\end{document} and/or \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm 2-butene} } \right]_{}^{_.^ + } $\end{document} (a-b), \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm isobutene} } \right]_{}^{_.^ + } $\end{document} (c) and [cyclobutane]⁺ (e), while the collisional activation spectrum of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm methylcyclopropane} } \right]_{}^{_.^ + } $\end{document} (d) could also arise from a combination of a-b and c. Although ready isomerization may occur for \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm 8}} } \right]_{}^{_.^ + } $\end{document} ions of higher internal energy, such as d or e → a, b, and/or c, the isomeric product ions identified from many precursors are consistent with previously postulated rearrangement mechanisms. 1,4-Eliminations of HX occur in 1-alkanols and, in part, 1-buthanethiol and 1-bromobutane. The collisional activation data are consistent with a substantial proportion of 1,3-elimination in 1- and 2-chlorobutane, although 1,2-elimination may also occur in the latter, and the formation of the methylcycloprpane ion from n-butyl vinyl ether and from n-butyl formate. Surprisingly, cyclohexane yields the \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm linear butene} } \right]_{}^{_.^ + } $\end{document} ions a-b, not \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm cyclobutane} } \right]_{}^{_.^ + } $\end{document}, e.     

An experimental study on optimization of $${\mathbf{SiO}}_{2}$$ SiO 2 /water nanofluid flows in circular minichannels

Journal of Thermal Analysis and Calorimetry - An experimental research was performed to examine the effect of hydrodynamically and thermally developing distilled water-based SiO $$_2$$ nanofluid...     

Gas phase isomerization of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 10}} {\rm H}_{{\rm 14}} } \right]_{}^{_.^ + } $\end{document} ions generated from adamantanoid compounds

\documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 10}} {\rm H}_{{\rm 14}} } \right]_{}^{_.^ + } $\end{document} ions have been generated from a number of adamantanoid compounds, both by ionization and ionization followed-by fragmentation. Metastable ion abundance ratios of competitive reactions indicate the decomposition of these ions from common structures in all cases.     

Syntheses and Crystal Structures of Ammoniates with the Phenyl‐Substituted Polytin Anions Sn2Ph$\rm{_{\bf 4}^{{\bf 2} - } }$, cyclo‐Sn4Ph$\rm{_{\bf 4}^{{\bf 4} - } }$, and Sn6Ph$\rm{_{{\bf 12}}^{{\bf 2} - } }$

The reaction of diphenyltin dichloride with the binary Zintl phase K₄Sn₉ in the presence of excess lithium and 18‐crown‐6 in liquid ammonia led to the ammoniate [K(18‐crown‐6)(NH₃)₂]₂Sn₂Ph₄ ( 1 ). The analogous reaction with K₄Ge₉ and potassium in the absence of further alkali metal ligands resulted in the compound [K₂(NH₃)₁₂]Sn₆Ph₁₂ ? 4 NH₃ ( 3 ). Cs₆[Sn₄Ph₄](NH₂)₂ ? 8 NH₃ ( 2 ) was prepared by reacting diphenyltin dichloride with a surplus of caesium in liquid ammonia. The low‐temperature single‐crystal structure determinations show all compounds to contain phenyl‐substituted polyanions of tin. Compound 1 is built from Sn₂Ph anions consisting of Sn dumbbells with two Ph substituents at each Sn‐atom. Compound 2 contains cyclo‐Sn₄Ph anions formed by a four‐membered tin ring in butterfly conformation with one Ph substituent at each Sn‐atom in an (all‐trans)‐configuration. Sn₆Ph in 3 is a zig‐zag Sn₆ chain with two substituents at each of the Sn‐atoms. Both 1 and 3 have molecular counter cations, in the latter case the unprecedented dinuclear potassiumammine complex [K₂(NH₃)₁₂]²⁺ is observed. Compound 2 shows a complicated three‐dimensional network of Cs? Sn interactions.