Comparison of sorption of Pb<Superscript>2+</Superscript> and Cd<Superscript>2+</Superscript> on Kaolinite clay and polyvinyl alcohol-modified Kaolinite clay

Kaolinite clay obtained from Ubulu-Ukwu, Delta state in Nigeria was modified with polyvinyl alcohol (PVA) reagent to obtain PVA-modified Kaolinite clay adsorbent. Scanning Electron Microscopy (SEM) of the PVA-modified adsorbent suggests that Kaolinite clay particles were made more compact in nature with no definite structure. Modification of Kaolinite clay with PVA increased its adsorption capacity for 300 mg/L Pb²⁺ and Cd²⁺ by a factor of at least 6, i.e., from 4.5 mg/g to 36.23 mg/g and from 4.38 mg/g to 29.85 mg/g, respectively, at 298 K. Binary mixtures of Pb²⁺ and Cd²⁺ decreased the adsorption capacity of Unmodified Kaolinite clay for Pb²⁺ by 26.3% and for Cd²⁺ by 0.07%, respectively. In contrast, for PVA-modified Kaolinite clay, the reductions were up to 50.9% and 58.5% for Pb²⁺ and Cd²⁺, respectively. The adsorption data of Pb²⁺ and Cd²⁺ onto both Unmodified and PVA-modified Kaolinite clay adsorbents were found to fit the Pseudo-Second Order Kinetic model (PSOM), indicating that adsorption on both surfaces was mainly by chemisorption and is concentration dependent. However, kinetic adsorption data from both adsorbent generally failed the Pseudo-First order Kinetic model (PFOM) test. Extents of desorption of 91% Pb²⁺ and 94% Cd²⁺ were obtained, using 0.1 M HCl, for the Unmodified Kaolinite clay adsorbent. It was found that 99% Pb²⁺ and 97% Cd²⁺, were desorbed, for PVA-modified Kaolinite clay adsorbents within 3 min for 60 mg/L of the metal ions adsorbed by the adsorbents.     

Cross-sections for formation of <Superscript>178m2</Superscript>Hf and <Superscript>179m2</Superscript>Hf through reactions on natural hafnium at neutron energy 14.8 ± 0.2 MeV

The cross sections for formation of metastable state of ¹⁷⁸Hf (^178m2Hf, 574.215 keV, 31 y) and ¹⁷⁹Hf (^179m2Hf, 362.55 keV, 25.05 d) through reactions induced by 14.8 ± 0.2 MeV neutrons on natural hafnium were measured for the first time. The monoenergetic neutron beam was produced via the ³H(d, n)⁴He reaction on ZF-300-II Intense Neutron Generator at Lanzhou University. Induced gamma activities were measured by a gamma-ray spectrometer with high-purity germanium (HPGe) detector. Measurements were corrected for gamma-ray attenuations, random coincidence (pile-up), dead time and fluctuation of neutron flux. The neutron fluence were determined by the cross section of ⁹³Nb(n, 2n)^92mNb reaction. The neutron energy in the measurement were by the cross section ratios of ⁹⁰Zr(n, 2n)^89m+gZr and ⁹³Nb(n, 2n)^92mNb reactions.     

Coordinatively Unsaturated Polynuclear Mixed-Valent Sn<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> and Cu<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> Oxo-Centered Carboxylates

The tetranuclear mixed-valent oxo-cluster [Sn^IISn^IVO(O₂CCF₃)₄]₂ (1) has been prepared by reacting SnCl₂ with AgO₂CCF₃ in a sealed ampoule at 90 °C. Alternatively, 1 was obtained by acidolysis of Ph₃SnSnPh₃ with trifluoroacetic acid in solution. The X-ray diffraction study of 1 revealed the presence of a Sn^IIOSn₂^IVOSn^II core comprised of the penta-coordinated divalent and six-coordinated tetravalent tin atoms. The ¹¹⁹Sn NMR studies confirmed the stability of the cluster in solution and the presence of two different oxidation states of tin. An acidolysis of Ph₃SnSnPh₃ in the presence of [Cu₂^II(O₂CCF₃)₄] followed by sublimation of the resulting product at 90 °C afforded the first trinuclear mixed metal Sn–Cu cluster [(C₆H₅)₂Sn₂^IVCu^IIO(O₂CCF₃)₆] (2). The X-ray diffraction analysis of 2 revealed the presence of two phenyl groups attached to the six-coordinated tin(IV) atoms and the tetragonal pyramidal environment of the copper(II) atom. Both complexes have been obtained free of exogenous ligands.     

Degradation of 81 keV <Superscript>133</Superscript>Xe gamma-rays into the 31 keV X-ray peak in CsI scintillators

Pacific Northwest National Laboratory uses beta-gamma coincidence detectors in a number of xenon sampling and measurement systems to enable simultaneous, sensitive measurements of ¹³¹Xe, ¹³³Xe, ^133mXe, and ¹³⁵Xe for treaty monitoring applications. In recent years, a new style of beta–gamma detector was developed to improve upon the detector module used in the Automated Radioxenon Sampler/Analyzer. The results of an MCNP5 Monte Carlo simulation of the new detector cell are presented, with particular emphasis on the identification of an energy deposition sequence with the potential to introduce significant error into the detector efficiency calibration. This sequence occurs when an 81 keV gamma from ¹³³Xe is absorbed in an inactive region of the CsI(Na) scintillator, followed by emission of a 31 keV X-ray from cesium (or possibly a 28.5 keV X-ray from iodine). These X-rays add excess counts into the 31 keV peak observed in the decay of ¹³³Xe. The impact of this effect on different efficiency calibration techniques is discussed.     

<Superscript>13</Superscript>C-labeled bilirubin: synthesis of 3<Superscript>1</Superscript>(3<Superscript>2</Superscript>),17<Superscript>1</Superscript>(17<Superscript>2</Superscript>)-di-[<Superscript>13</Superscript>C]-mesobilirubin-XIIIα

Abstract  The title compound, labeled with ¹³C in the ethyl groups was synthesized from K¹³CN and low-molecular-weight components. The synthetic relay compound was 3¹(3²)[¹³C]-xanthobilirubinic acid methyl ester in a synthetic route that leads to a label in the ethyl β-substituent of a dipyrrinone model for bilirubin. This labeled dipyrrinone was oxidatively coupled to the dimethyl ester of mesobiliverdin-XIIIα, thereby providing a route to a ¹³C-labeled mesobiliverdin and mesobilirubin, with one carbon of each ethyl being 98% ¹³C-enriched. Graphical Abstract        

<Superscript>133</Superscript>Cs NMR Study of Cs<Superscript>+</Superscript> Ion Complexes with Dibenzo-24-crown-8, Dicyclohexano-24-crown-8 and Dibenzo-30-crown-10 in Binary Acetonitrile-Nitromethane Mixtures

Complexation of the cesium ion with the macrocyclic ligands: dibenzo-24-crown-8 (DB24C8), dicyclohexano-24-crown-8 (DC24C8) and dibenzo-30-crown-10 (DB30C10) was studied in binary acetonitrile-nitromethane mixtures by ¹³³Cs NMR spectroscopy. The ¹³³Cs chemical shift data indicated that the cesium cation forms 1:1 cation:ligand complexes with DB24C8 and DB30C10 but forms 2:1, 1:1 and 1:2 cation:ligand complexes with DC24C8 in acetonitrile-nitromethane mixtures. The formation constants of the complexes were calculated from the computer fitting of the chemical shift mole ratio data. The results show that the complex formation constants with the Cs⁺ cation vary in the order DC24C8>DB24C8∼DB30C10. It was found that the stability of the resulting complexes increases with increasing nitromethane concentration in the solvent mixture.     

The Hydrolysis of AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> and the Stability of Aquachlorohydroxocomplexes of Gold(III) in Aqueous Solution

The equilibria AuCl₄⁻+jOH⁻+kH₂O⇌AuCl_4−j−k (OH) _j (H₂O) _k ^k−1+(j+k)Cl⁻, β _jk (0≤j,k≤4) have been studied spectrophotometrically at 20 °C in aqueous solution. For I=2 mol⋅dm⁻³(HClO₄) the conventional constants, β _i ^*, of the equilibria, Au^*+iCl⁻ ⇌AuCl _i ^*, are equal to log ₁₀ β ₁^*=(6.98±0.08); log ₁₀ β ₂^*=(13.42±0.05); log ₁₀ β ₃^*=(19.19±0.09); and log ₁₀ β ₄^*=(24.49±0.07), where [AuCl _i ^*]=∑[AuCl _i (OH) _j (H₂O)_4−i−j ] at i=const. The hydrolysis and other transformations of AuCl₄⁻ in aqueous solution are discussed. On the basis of new and known data, a full set of equilibrium constants, β _jk , or their estimates has been obtained.     

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.     

A simple and quick method for the preparation of radionuclide <Superscript>87</Superscript>Y/<Superscript>87m</Superscript>Sr generator using the <Superscript>nat</Superscript>Rb(α,xn)<Superscript>87</Superscript>Y reaction

A rapid method for the preparation of ⁸⁷Y/^87mSr radionuclide generator from a rubidium chloride target irradiated with 35 MeV α-particles is described. A simple two-step procedure is used to obtain a carrier-free ^87mSr isotope with a high enough radiochemical yield and high purity in the final aqueous fraction.     

Determination of Activation Energy for the Diffusion of Fe<Superscript>3+</Superscript> Ions in Agar Gel Medium Containing Various Transition Metal Sulfates

The study of the diffusion of ferric ions in agar gel containing transition metal sulfates was carried out. The effect of gel concentration, electrolyte concentration and temperature on the diffusion of Fe³⁺ ions in various transition metal sulfates was studied with a view to verify Wang’s model of diffusion and the applicability of transition state theory to diffusion in a gel medium. The diffusion coefficients were measured using the zone diffusion technique. For a given concentration of electrolyte the activation energy (E) is found to decrease with an increase in the charge density of the cation of the supporting electrolyte and for a given system it is found to decrease with increasing electrolyte concentration in agreement with Wang’s model. This observation is explained on the basis of the distortion in the water structure caused by ions and agar molecules. At a given electrolyte concentration the magnitude of the Arrhenius parameters, E and D _o, is found to decrease with increasing gel concentration in agreement with the transition state theory of diffusion.     

Cyclotron production of <Superscript>211</Superscript>At/<Superscript>211g</Superscript>Po by <Superscript>209</Superscript>Bi(α,2n) reaction

Astatine-211 (T _1/2 = 7.214 h) is an α-emitter at secular equilibrium by EC with its ultra-short-lived α-emitting daughter, polonium-211g (T _1/2 = 0.516 s), with a high Linear Energy Transfer (LET — 130 eV·nm⁻¹) and a half-life suitable for metabolic radiotherapy; the overall α branching of the ²¹¹At/^211gPo system is 100%. The direct production of ²⁰⁹Bi(α,2n)²¹¹At/^211gPo seems the most satisfactory method; Bi targets were irradiated at JRC-Ispra Cyclotron of European Commission, EC, using α-energy higher than 28.61 MeV in order to produce, via ²⁰⁹Bi(α,3n) reaction, small amounts of the γ-emitter ²¹⁰At (used as internal spike).     

Preparation of <Superscript>235m</Superscript>U targets for <Superscript>235</Superscript>U(n,n′)<Superscript>235m</Superscript>U cross section measurements

This paper describes the preparation of samples for an experiment to measure the cross-section for ²³⁵U(n,n′)^235mU in a fast fission spectrum of neutrons provided by a fast pulsed reactor/critical assembly. Samples of ^235mU have been prepared for the calibration of the internal conversion electron detector that is used for the ^235mU measurement. Two methods are described for the preparation of ^235mU. The first method used a U-Pu chemical separation based on anion-exchange chromatography and the second method used an alpha recoil collection method. Thin, uniform samples of ^235mU+²³⁵U were prepared for the experiment using electrodeposition.     

Validation of <Superscript>239,240</Superscript>Pu, <Superscript>238</Superscript>Pu separation method using molecular recognition product AnaLig<Superscript>®</Superscript> Pu02 gel and extraction chromatography TRU<Superscript>®</Superscript> resin

Two separation techniques for plutonium determination using AnaLig^® Pu02 molecular recognition technology product (MRT) and extraction chromatography TRU^® resin were tested. The methods performance was investigated by analysis of National Physical Laboratory (NPL-Alpha-Beta High, ABH 2003, 2005) intercomparison test samples. The results obtained for both procedures were compared in terms of activities and recoveries. Data analysis showed good agreement with the reference values. The AnaLig^® Pu02 separation method for ^239,240Pu, ²³⁸Pu determination was successfully validated with the same performance as the TRU^® resin method.     

Relativistic coupled cluster calculations of the electronic structure of KrH<Superscript>+</Superscript>, XeH<Superscript>+</Superscript> and RnH<Superscript>+</Superscript>

Potential energy curves of NgH⁺ cations (Ng = Kr, Xe, Rn) were obtained by using four-component relativistic CCSD(T) coupled cluster calculations. Dissociation energies, equilibrium bond lengths, electronic properties, such as dipole moments and electric field gradients at the nuclei, and the related spectroscopic parameters of the electronic ground state have been determined. The results obtained for KrH⁺ and XeH⁺ are in good agreement with available experimental data, while those for RnH⁺ have been determined for the first time at this level of theory.     

Cis→Trans Isomerization of Pro<Superscript>7</Superscript> in Oxytocin Regulates Zn<Superscript>2+</Superscript> Binding

Ion mobility/mass spectrometry techniques are employed to investigate the binding of Zn²⁺ to the nine-residue peptide hormone oxytocin (OT, Cys¹-Tyr²-Ile³-Gln⁴-Asn⁵-Cys⁶-Pro⁷-Leu⁸-Gly⁹-NH₂, having a disulfide bond between Cys¹ and Cys⁶ residues). Zn²⁺ binding to OT is known to increase the affinity of OT for its receptor [Pearlmutter, A. F., Soloff, M. S.: Characterization of the metal ion requirement for oxytocin-receptor interaction in rat mammary gland membranes. J. Biol. Chem. 254, 3899–3906 (1979)]. In the absence of Zn²⁺, we find evidence for two primary OT conformations, which arise because the Cys⁶–Pro⁷ peptide bond exists in both the trans- and cis-configurations. Upon addition of Zn²⁺, we determine binding constants in water of K_A = 1.43 ± 0.24 and 0.42 ± 0.12 μM^?1, for the trans- and cis-configured populations, respectively. The Zn²⁺ bound form of OT, having a cross section of Ω = 235 Ų, has Pro⁷ in the trans-configuration, which agrees with a prior report [Wyttenbach, T., Liu, D., Bowers, M. T.: Interactions of the hormone oxytocin with divalent metal ions. J. Am. Chem. Soc. 130, 5993–6000 (2008)], in which it was proposed that Zn²⁺ binds to the peptide ring and is further coordinated by interaction of the C-terminal, Pro⁷-Leu⁸-Gly⁹-NH₂, tail. The present work shows that the cis-configuration of OT isomerizes to the trans-configuration upon binding Zn²⁺. In this way, the proline residue regulates Zn²⁺ binding to OT and, hence, is important in receptor binding.

Open image in new window

Graphical Abstract ?

     

Near-infrared DC approach by Bi<Superscript>3+</Superscript>–Yb<Superscript>3+</Superscript> co-doped YAG phosphor

Bi³⁺–Yb³⁺ ion pair co-doped YAG phosphors were successfully synthesized using conventional solid state reaction method varying the concentration of Yb³⁺ ions from 0.5 to 10 mol%. The optimum phosphors were characterized by powder X-ray diffraction (XRD), and surface morphology was studied with a scanning electronic microscope (SEM). The photoluminescence (PL) properties were studied with a spectrophotometers in near infrared (NIR) and ultraviolet visible (UV-Vis) regions. The synthesized phosphors can convert a photon of UV region (330 nm) into photons of NIR region (979 and 992 nm). The co-operative energy transfer (CET) was studied using a time decay curve and PL spectra. The theoretical value of quantum efficiency (QE) was calculated from steady time decay measurement, and the maximum efficiency approached up to 166.91 %. Hence, this phosphor could be used as a downconversion (DC) luminescent convertor in front of crystalline silicon solar cell (c-Si) panels to reduce heat loss due to spectral mismatch of the solar cells.     

Crystallinity of Dynasan<Superscript>®</Superscript>114 and Dynasan<Superscript>®</Superscript>118 matrices for the production of stable Miglyol<Superscript>®</Superscript>-loaded nanoparticles

This study focuses on the physicochemical characterization of lipid materials useful for the production of the so-called solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The chosen lipids were Dynasan^®114 (glyceril trimyristate) and Dynasan^®118 (glyceril tristearate) as solid lipids (SL), melting temperature above 80 °C, and Miglyol^®812 (caprylic/capric triglyceride) and Miglyol^®840 (propylene glycol dicaprylate/dicaprate) as liquid lipids (LL), crystallizing below ?15 °C. Raw lipids (pure or SL:LL mixtures) were analyzed by differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), and Polarized Light Microscopy (PLM), before and after tempering at 80 °C for 1 h. The selected SL:LL combination was 70% (Dynasan^®114 and 118) and 30% (Miglyol^®812 and 840) for the production of SLN and NLC by high-pressure homogenization (HPH), respectively. Particles with a mean size of 200 nm (polydispersity index <0.329) and zeta potential of ?15 mV were obtained, and their long-term stability was confirmed for 3 months of storage at 7 °C.     

Complexation of 4′-Nitrobenzo-15-crown-5 with Zn<Superscript>2+</Superscript>, Mn<Superscript>2+</Superscript>, Cr<Superscript>3+</Superscript> and Sn<Superscript>4+</Superscript> Cations in Acetonitrile–Ethanol Binary Mixtures

The complexation reactions of 4′-nitrobenzo-15-crown-5 (4′NB15C5) with Zn²⁺, Mn²⁺, Cr³⁺ and Sn⁴⁺ cations were studied in acetonitrile–ethanol (AN–EtOH) binary solvent mixtures at different temperatures by the electrical conductometry method. The stability constants of the resulting 1:1 complexes were determined from computer fitting of the conductance versus mole ratio data. The results show that the selectivity order of 4′NB15C5 for the metal cations in the AN–EtOH (mol-%AN=76) binary solvent at 298.15 K is: Cr³⁺>Mn²⁺≈Zn²⁺>Sn⁴⁺, but the selectivity order changes with the composition of the mixed solvents. A nonlinear relationship was observed between the stability constants (log ₁₀ K _f) of these complexes and the composition of the AN–EtOH binary solvents. The corresponding thermodynamic parameters (DH_c^o, DS_c^o)(\Delta H_{\mathrm{c}}^{\mathrm{o}}, \Delta S_{\mathrm{c}}^{\mathrm{o}}) were obtained from the temperature dependence of the stability constants using van’t Hoff plots. The results show that the values and also the sign of these parameters are influenced by the nature and composition of the mixed solvents.     

Production possibility of <Superscript>186</Superscript>Re via the <Superscript>192</Superscript>Os(p,α3n)<Superscript>186</Superscript>Re nuclear reaction

Experimentally measured cross-sections are presented for the first time for the ¹⁹²Os(p,α3n)¹⁸⁶Re nuclear reaction up to 67 MeV. Highly enriched thin ¹⁹²Os targets (15 pcs), prepared by electro-deposition onto Cu backings, were irradiated with an external proton beam delivered by the SSC cyclotron of iThemba LABS. The excitation function curve of the ¹⁹²Os(p,α3n)¹⁸⁶Re reaction shows a maximum cross-section of ~82 mb at about 24 MeV. According to the yield calculations based on the present results, the available cumulative no-carrier-added ¹⁸⁶Re yield is 7.76 MBq/μAh (0.21 mCi/μAh) over the energy region 13.4 → 27.3 MeV.     

Complexation of 4′-nitrobenzo-15-crown-5 with Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript> and Ba<Superscript>2+</Superscript> metal cations in acetonitrile-methanol binary solutions

The complex formation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, 4′-nitrobenzo-15C5, were studied in acetonitrile (AN)-methanol (MeOH) binary mixtures at different temperatures using conductometric method. The results show that 4′-nitrobenzo-15C5 forms 1:1 [ML] complexes with Mg²⁺, Ca²⁺ and Sr²⁺ metal cations in solutions. But in the case of Ba²⁺ cation a 1:2 [ML₂] complex is formed in these solvent systems. The stability of the complexes is sensitive to the solvent composition and a non-linear behavior was observed for variation of logK _f of the complexes versus the composition of the binary mixed solvents. The stability constants of complexes decrease suddenly with increasing the concentration of methanol in this binary system. The values of thermodynamic parameters (ΔH _c^° and ΔS _c^°) for formation of (4′-nitrobenzo-15C5.Mg)²⁺, (4′-nitrobenzo-15C5.Ca)²⁺ and (4′-nitrobenzo-15C5.Sr)²⁺ complexes were obtained from temperature dependence of the stability constants and the results show that these parameters are affected by the nature and composition of the mixed solvents. A non-linear behavior is observed between the ΔS _c^° and the composition of the mixed solvents.