Characterization of pyrene end-labeled poly(ethylene glycol) by high resolution MALDI time-of-flight mass spectrometry

We report the characterization of a sample of poly(ethylene glycol) (PEG, M _n = 3841, M _w/M _n = 1.01), and its derivative end-labeled with pyrenebutyrate groups, using high resolution MALDI time-of-flight mass spectrometry. A matrix of 2-(4-hydroxyphenyl-azo)benzoic acid containing a trace of either sodium chloride or potassium chloride was employed for laser desorption. Peaks due to the sodium or potassium cationized polymers were obtained, equally spaced at 44 mass units apart. For the pyrenebutyrate diester, the analysis shows that 80 ± 2% of the chains were doubly labeled, with the ramaining chains containing only a single pyrene group. Molecular weight determinations for both sets of samples were entirely consistent with size-exclusion chromatography measurements, but were obtained with greater accuracy and less ambiguity about the influence of the end groups on the hydrodynamic radius of the polymer.     

Tandem mass spectrometry of poly(ethylene glycol) lithium-attachment ions

A study of the fast-atom bombardment tandem mass spectrometry behavior of a number of ethylene glycol polymers (PEGs) has been carried out. Both linear (hydroxyl, amino, and/or alkyl end groups) and cyclic (crown ether) polymers were studied. One of the materials is a block copolymer of ethylene and propylene oxides. Collisional activation was carried out in the collision octapole of a BEoQ hybrid mass spectrometer at a translational energy of 50 eV, with collision gas air. For the linear polymers, the most intense product ions are lithiated, linear polyglycol oligomers. These ions are formed via internal hydrogen transfer reactions that are facilitated (charge-induced) by lithium. This series of product ions allows for the observation of consecutive losses of monomer units from the chain end; this is useful to determine the sequence of monomers in a copolymer. The most abundant product ions from cyclic PEGs are lithiated radical cations. An especially interesting finding in this work is the preferential loss of two internal ethylene oxide (EO) units (dioxane, 88 u) from some [M + Li]⁺ precursors. Factors that influence this loss include (a) the sequence length of EO repeat units in the oligomer and (b) the identity of the end group(s) on the oligomer. It is proposed that this elimination of dioxane involves a six-membered ring intermediate; this decomposition reaction is believed to be a lithium-mediated (charge-induced) rearrangement. (J Am Soc Mass Spectrom 1994, 5, 1072-1080)     

Characterization of poly(ethylene glycol) esters using low energy collision-induced dissociation in electrospray ionization mass spectrometry

A method of characterizing polyglycol esters, an important class of industrial polymer, has been developed using electrospray ionization ion trap mass spectrometry (ESI ITMS). The fragmentation behavior of polyglycol esters is found to be different from that of polyglycols whose functional end groups are linked to the polymer chain via ether bonds (i.e., polyglycol ethers). The fragmentation pattern of an oligomer ion generated by low-energy collision-induced dissociation is strongly dependent on the type of cation used for ionization. It is shown that structural information on the polymer chain and end groups is best obtained by examining the fragment ion spectra of oligomers ionized by ammonium, alkali, and transition metal ions. The application of this method is demonstrated in the analysis of two surfactants based on fatty acid methyl ester ethoxylates.     

Online aerosol mass spectrometry of single micrometer-sized particles containing poly(ethylene glycol)

The analysis of poly(ethylene glycol) (PEG)-containing particles by online single particle aerosol mass spectrometers equipped with laser desorption/ionization (LDI) is reported. We demonstrate that PEG-containing particles are useful in the development of aerosol mass spectrometers because of their ease of preparation, low cost, and inherently recognizable mass spectra. Solutions containing millimolar quantities of PEGs were nebulized and, after drying, the resultant micrometer-sized PEG-containing particles were sampled. LDI (266 nm) of particles containing NaCl and PEG molecules of average molecular weight<500 Da generated mass spectra reminiscent of mass spectra of PEG collected by other mass spectrometer platforms including the characteristic distribution of positive ions (Na+ adducts) separated by the 44 m/z units of the ethylene oxide units separating each degree of polymerization. PEGs of average molecular weight>500 Da were detected from particles that also contained the tripeptide tyrosine-tyrosine-tyrosine or 2,5-dihydroxybenzoic acid, which were added to nebulized solutions to act as matrices to assist LDI using pulsed 266 nm and 355 nm lasers, respectively. Experiments were performed on two aerosol mass spectrometers, one reflectron and one linear, that each utilize two time-of-flight mass analyzers to detect positive and negative ions created from a single particle. PEG-containing particles are currently being employed in the optimization of our bioaerosol mass spectrometers for the application of measurements of complex biological samples, including human effluents, and we recommend that the same strategies will be of great utility to the development of any online aerosol LDI mass spectrometer platform.     

Thermogelling polymers composed of poly(cyclohexylenedimethylene adipate) and poly(ethylene glycol)

Block copolymers composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic biodegradable polyesters have been reported as thermogelling polymers, because they feature temperature-dependent sol-to-gel or gel-to-sol transitions in aqueous solutions. In this study, a series of thermogelling poly(ethylene glycol methyl ether)-block–poly(cyclohexylenedimethylene adipate)-block–poly(ethylene glycol methyl ether) triblock copolymers and PEG-block–poly(cyclohexylenedimethylene adipate) multiblock copolymers was synthesized by reacting hydroxyl-terminated poly(cyclohexylenedimethylene adipate) (PCA) with poly(ethylene glycol methyl ether) and PEG, respectively, using 1,6-diisocyanatohexane as the coupling agent. Two hydroxyl-terminated PCAs, i.e., poly(1,4-cyclohexylenedimethylene adipate) and poly(1,3/1,4-cyclohexylenedimethylene adipate), were synthesized by the condensation reaction of adipic acid (AA) with 1,4-cyclohexanedimethanol (CHDM) and 1,3/1,4-CHDM, respectively, and used as the hydrophobic polyester blocks of these thermogelling copolymers to compare the effect of crystallinity on the sol-to-gel transition behavior.The polymers were characterized using proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, differential scanning calorimetry, solubility testing, and rheological analysis. Experimental results revealed that the structure of the PCA block (crystalline vs. amorphous), the molecular weights of the hydrophobic PCA and hydrophilic PEG blocks, and the type of thermogelling polymer (triblock vs. multiblock) influenced the solubility, polymer micelle packing characteristics, maximum storage modulus, and sol-to-gel temperature of the polymers. Among all the samples at 40 wt.% aqueous solutions, triblock copolymer TB3 showed sol-to-gel temperature at 22 °C, and had the highest maximum storage modulus about 170 Pa.     

The characterization of dendronized poly(ethylene glycol)s and poly(ethylene glycol) multi-arm stars using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The synthesis of branched poly(ethylene glycol) (PEG) derivatives, namely star PEG and dendronized PEG, can be challenging and their purity can be difficult to ascertain using traditional techniques, such as NMR and GPC. Herein, the detailed characterization of these branched PEGs using MALDI-ToF MS was investigated in order to confirm their structural purity. In this light, mass spectrometry offers a number of advantages for polymer characterization, including the ability to get detailed structural data, such as end group masses, from microgram-scale samples. In addition, the ability to rapidly acquire data from crude reaction aliquots makes MALDI-ToF MS ideal for monitoring end group transformations.     

Amphiphilic comb-shaped polymers from poly(ethylene glycol) macromonomers

Comb-shaped amphiphilic graft copolymers composed of hydrophobic backbones and hydrophilic side chains were prepared by radical copolymerization of poly(ethylene glycol) monomethacrylate macromonomers, and methacrylate and acrylate comonomers in toluene. The copolymerizations were very sensitive to the reaction conditions, and insoluble cross-linked gels were easily formed. The yields of soluble copolymers were affected by the initiator concentration, the macromonomer concentration, and the choice of chain transfer agents and comonomers. Solubilities of the copolymers in water or methanol were found to depend on the sizes and the numbers of the PEG side chains. The copolymers showed surface activity with CMC:s in the order of 0.1–1.5 g/L and surface tensions of 36–56 dyn/cm. When tested as emulsifiers most of the copolymers gave oil-in-water type emulsions at room temperature. Polymers carrying MPEG 2000 side chains were crystalline with melting points of 38–44°C, while those based on PEG 400 and 1000 were mostly amorphous with glass transition temperatures between -55 and -60°C. © 1992 John Wiley & Sons, Inc.     

Quantification of grafted poly(ethylene glycol)-silanes on silicon by time-of-flight secondary ion mass spectrometry

Silicon grafted monodisperse poly(ethylene glycol) (PEG) silanes with various PEG chain lengths and mixtures of these were systematically analyzed with static time-of-flight secondary ion mass spectrometry (TOF-SIMS). The mass spectra show differences in the various relative signal intensities, an observation that was used to elucidate important aspects of the grafting process. The relationship between PEG-silane fragment ion abundances and Si(+) ion abundances were used to (i) qualitatively describe layer thicknesses of grafted mixtures of PEG-silanes on silicon, (ii) construct a calibration curve from which PEG chain length (or molecular mass) can be determined and (iii) quantitatively determine surface mixture compositions of grafted monodisperse PEG-silanes of different chain lengths (3, 7 and 11 PEG units). The results suggest that discrimination does take place in the adsorption process. The PEG-silane with the shorter PEG chain is discriminated for mixtures containing PEG3-silane, whereas the PEG-silane with the longer PEG chain is discriminated in PEG7/PEG11-silane mixtures. The origin of this difference in adsorption behavior is not well understood. Aspects of the grafting process and the TOF-SIMS analyses are discussed.     

Synthesis of novel poly(ethylene glycol) based amphiphilic polymers

The synthesis of new amphiphilic polyesters based on poly(ethylene glycol) (PEGs) and studies on their solution properties are reported. Two novel monomers, dimethyl 5-n-butoxy isophthalate (2) and dimethyl 5-n-octoxy isophthalate (3) were synthesized. Three series of novel amphiphilic polyesters, i.e. poly(ethyleneoxy isophthalate)s (10-15), poly(ethyleneoxy n-butoxy isophthalate)s (16-21) and poly(ethyleneoxy n-octoxy isophthalate)s (22-27) have been synthesized from PEGs of different sizes and dimethyl isophthalates 1-3 via the transesterification-polycondensation using dibutyltin diacetate as a catalyst. The structures of the polyesters were established from a detailed analysis of their spectra, i.e. FTIR, ¹H-NMR (one- and two-dimensional) and ¹³C-NMR. By adjusting the ratio of hydrophobic (diesters) and hydrophilic (PEGs) segments in polymers, their main chain structures and solution properties could be changed. The viscosity molecular weights (M_v) of polymers, obtained from Mark-Houwink-Sakurada relationship having poly(ethylene terephthalate) as a model, were in the range of 4500-32,000 g/mol. Intrinsic viscosities were studied based on polymer backbone length (PEGs effect) and pendant group (diesters effect) and these were found to be dependent on molecular weights of the PEGs used.     

External ion accumulation of low molecular weight poly(ethylene glycol) by electrospray ionization fourier transform mass spectrometry

The combination of electrospray ionization (ESI) with Fourier transform mass spectrometry (FTMS) is a powerful tool in characterizing synthetic polymers. ESI permits the generation of intact, multiply charged high mass ions, whereas FTMS provides high mass resolution and correspondingly improved mass accuracy. However, under “nonideal” empirically determined operating conditions, a mass discrimination effect occurs as a function of accumulation time that can result in significant differences for calculated average mass values (M_n, M_w) and polydispersities. A multidimensional tuning process to eliminate the deleterious effects of mass bias is demonstrated for several sodiated poly(ethylene glycol) samples containing oligomers with masses covering a 600–3350 Da mass regime. In addition, experiments are performed in order to elucidate the possible mechanism(s) that cause the mass discrimination effect. It is proposed that extended collisions (reactive and nonreactive) occur in the hexapole to alter the energy (and velocity) distributions of the ions before injection into the trap. By choosing higher skimmer potentials, ions over a narrower energy “window” are preselected in the hexapole and exhibit lower overall mass bias effects.     

Differentiation of isomeric compounds by two-stage proton transfer reaction time-of-flight mass spectrometry

We investigated a two-stage ion source for proton transfer reaction (PTR) ionization to achieve more selective mass spectrometric (MS) detection of selected volatile organic compounds (VOCs) than that achieved with commonly used PTR-MS instruments, which are based on single-step PTR ionization with H3O+. The two-stage PTR ion source generated reagent ions other than H3O+ by an initial PTR between H3O+ and a selected VOC, and then a second PTR ionization occurred only for VOCs with proton affinities larger than the affinity of the reagent VOC. Acetone and acetonitrile were useful as reagent VOCs because they provided dominant peaks as a protonated form. Using two-stage PTR-MS, we differentiated isomeric VOCs (for example, ethyl acetate and 1,4-dioxane) by means of differences in their proton affinities; protonated acetone formed the [M + H]+ ion from ethyl acetate but not from 1,4-dioxane. The PTR-MS-derived concentrations agreed quantitatively with those independently determined by Fourier transform infrared spectroscopy (FT-IR) at parts per million by volume (ppmv) levels. In addition, interfering fragment ions formed from alkyl benzenes at m/z 79 (C6H7+) could be distinguished from the m/z 79 ion arising from protonation of benzene, and therefore this method would prevent overestimation of benzene concentrations in air samples in which both benzene and alkyl benzenes are present. This two-stage PTR ionization may be useful for distinguishing various isomeric species, including aldehydes and ketones, if appropriate reagent ions are selected.     

Dynamics in water-AOT-n-decane microemulsions with poly(ethylene glycol) probed by dielectric spectroscopy

Water in oil microemulsions, consisting of water, AOT and n-decane, have been used as a model system to investigate the influence of the water soluble polymer PEO on the dynamical behavior of the system. Therefore dielectric relaxation spectroscopy and conductivity, extracted from dielectric spectroscopy, measurements in a wide frequency and temperature range have been applied. The pure microemulsion displays the known phenomenon of percolation that manifests in a steep increase of conductivity at the percolation temperature $T_\text{P}Water in oil microemulsions, consisting of water, AOT and n-decane, have been used as a model system to investigate the influence of the water soluble polymer PEO on the dynamical behavior of the system. Therefore dielectric relaxation spectroscopy and conductivity, extracted from dielectric spectroscopy, measurements in a wide frequency and temperature range have been applied. The pure microemulsion displays the known phenomenon of percolation that manifests in a steep increase of conductivity at the percolation temperature T_\textPT_\text{P}. The percolation temperature has been found to be strongly dependent on droplet volume fraction and droplet size. The latter additionally shows that percolation temperature and surfactant film rigidity are proportional. Far from percolation water-AOT-n-decane microemulsions display two dielectric relaxations. The slower one has a relaxation time of t ? 3·10^-6 \texts\tau \approx 3\cdot 10^{-6}~\text{s} and can be related to an interfacial polarization at the interface of the water core and the AOT shell (core relaxation). The faster one has a relaxation time of t ? 10^-9 \texts\tau \approx 10^{-9}~\text{s} and can be related to the ions in the AOT shell(shell or cluster relaxation). While the first is mainly untouched by the percolation phenomenon, the latter undergoes a slowdown and an increase of relaxation strength, both over about two decades, on approaching the percolation transition. Addition of PEO tremendously shifts the percolation transition to higher temperatures, due to adsorption at the AOT layer which leads to an increase in rigidity. Furthermore a lower phase boundary temperature evolves, below which the microemulsion phase separates. The conductivity of the microemulsion is also slightly increased with polymer. The effect on the dielectric properties is only small, where dielectric relaxation times are reduced by the polymer, while only the relaxation strength of the faster relaxation is influenced and also decreases with polymer. The decreased relaxation time of core relaxation can be either due to changes in the core to shell volume ratio or an increased conductivity of the water core. The decrease in relaxation time and strength of the shell relaxation suggest that the ion mobility in the shell increase, while the dipole moment is reduced. Additionally we applied a cluster relaxation model proposed by Cametti et al. (Phys Rev Lett 75(3):569, 1995) and Bordi et al. (J Phys, Condens Matter 8:A19, 1996) to estimate the cluster size evolution.     

Synthesis and characterization of poly(ethylene glycol) polymers functionalized by terminal tributyltin carboxylate moieties

Novel polymeric derivatives of various average molecular weights bearing tributyltin carboxylate moieties as terminal groups have been prepared by esterification with bis(tributyltin) oxide of the corresponding poly(ethylene glycol)s functionalized with dimethylenecarboxylic end groups. Low‐molecular‐weight compounds have also been synthesized, with the aim of investigating the influence of the polymeric chain on tin properties. As investigated by Sn NMR and Fourier transform infrared, the metal center appears to be completely tetracoordinated in chloroform solution at room temperature, whereas at low temperature, the tin atom undergoes a fast exchange between intramolecular pentacoordination with the ethereal oxygen atoms and the unassociated form. In the solid state, even at room temperature, all the polymeric products exhibit both tetracoordination and pentacoordination at tin, the latter achieved by interaction with both ethereal and carbonyl oxygens. The thermal behavior of the series of compounds indicates the presence of crystalline domains in the material, which can be ascribed either to intermolecular interactions at tin, giving rise to organometal aggregates, or to the formation of an ordered phase induced by the presence of the macromolecular chain, depending on the more or less elevated relative concentration of the organotin moieties in the sample. These findings are also confirmed by the X‐ray diffractions patterns of the investigated products. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3091–3104, 2005     

Preparation of poly(ethylene oxide) star polymers and poly(ethylene oxide)–polystyrene heteroarm star polymers by atom transfer radical polymerization

Poly(ethylene oxide) (PEO) star polymer with a microgel core was prepared by atom transfer radical poylmerization (ATRP) of divinyl benzene (DVB) with mono‐2‐bromoisobutyryl PEO ester as a macroinitiator. Several factors, such as the feed ratio of DVB to the initiator, type of catalysts, and purity of DVB, play important roles during star formation. The crosslinked poly(divinyl benzene) (PDVB) core was further obtained by the hydrolysis of PEO star to remove PEO arms. Size exclusion chromatography (SEC) traces revealed the bare core has a broad molecular weight distribution. PEO–polystyrene (PS) heteroarm star polymer was synthesized through grafting PS from the core of PEO star by another ATRP of styrene (St) because of the presence of initiating groups in the core inherited from PEO star. Characterizations by SEC, ¹H NMR, and DSC revealed the successful preparation of the target star copolymers. Scanning electron microscopy images suggested that PEO–PS heteroarm star can form spherical micelles in water/tetrahydrofuran mixture solvents, which further demonstrated the amphiphilic nature of the star polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2263–2271, 2004     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol)

The surface of polyethersulfone (PES) membrane was modified by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol) (mPEG-PU-mPEG), which were synthesized through solution polymerization with mPEG Mns of 500 and 2000, respectively. The PES and PES/mPEG-PU-mPEG blended membranes were prepared through spin coating coupled with liquid-liquid phase separation. FTIR and (1)H NMR analysis confirmed that the triblock copolymers were successfully synthesized. The functional groups and morphologies of the membranes were studied by ATR-FTIR and SEM, respectively. It was found that the triblock copolymers were blended into PES membranes successfully, and the morphologies of the blended membranes were somewhat different from PES membrane. The water contact angles and platelet adhesion were decreased after blending mPEG-PU-mPEG into PES membranes. Meanwhile, the activated partial thromboplastin time (APTT) for the blended membranes increased. The anti-protein-fouling property and permeation property of the blended membranes improved obviously. SEM observation and 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay proved the surfaces of the blended membranes promoted human hepatocytes adhesion and proliferation better than PES membrane.     

Stereoregularity of poly(2-vinylpyridine) determined by 1H-NMR and 13C-NMR spectroscopy

In order to determine the stereoregularity of poly(2-vinylpyridine), 2-vinylpyridine-β,β-d₂ was synthesized. The ¹H-NMR spectra of the deuterated polymer in D₂SO₄ and o-dichlorobenzene solutions showed three peaks, which were assigned to triad tacticities. Since the absorptions of heterotactic and syndiotactic triads of methine protons overlap those of methylene protons in nondeuterated polymers, only isotactic triad intensities can be obtained from the ¹H-NMR spectra of nondeuterated poly(2-vinylpyridine). The ¹³C-NMR spectra of poly(2-vinylpyridine) were obtained in methanol and sulfuric acid solutions. In methanol solution the absorption was split into three groups, which cannot be explained by triads, and in sulfuric acid solution several peaks were observed. These splittings may be due to pentad tacticity. The results show that poly(2-vinylpyridine) obtained by radical polymerization is an atactic polymer.