Low-temperature UV-visible and NMR spectroscopic investigations of O(2) binding to ((6)L)Fe(II), a ferrous heme bearing covalently tethered axial pyridine ligands

In this report, we describe the reversible dioxygen reactivity of ((6)L)Fe(II) (1) [(6)L = partially fluorinated tetraphenylporphyrin with covalently appended TMPA moiety; TMPA = tris(2-pyridylmethyl)amine] using a combination of low-temperature UV-vis and multinuclear ((1)H and (2)H) NMR spectroscopies. Complex 1, or its pyrrole-deuterated analogue ((6)L-d(8))Fe(II) (1-d(8)), exhibits downfield shifted pyrrole resonances (delta 28-60 ppm) in all solvents utilized [CH(2)Cl(2), (CH(3))(2)C(O), CH(3)CN, THF], indicative of a five-coordinate high-spin ferrous heme, even when there is no exogenous axial solvent ligand present (i.e., in methylene chloride). Furthermore, ((6)L)Fe(II) (1) exhibits non-pyrrolic upfield and downfield shifted peaks in CH(2)Cl(2), (CH(3))(2)C(O), and CH(3)CN solvents, which we ascribed to resonances arising from the intra- or intermolecular binding of a TMPA-pyridyl arm to the ferrous heme. Upon exposure to dioxygen at 193 K in methylene chloride, ((6)L)Fe(II) (1) [UV-vis: lambda(max) = 433 (Soret), 529 (sh), 559 nm] reversibly forms a dioxygen adduct [UV-vis: lambda(max) = 422 (Soret), 542 nm], formulated as the six-coordinate low-spin [delta(pyrrole) 9.3 ppm, 193 K] heme-superoxo complex ((6)L)Fe(III)-(O(2)(-)) (2). The coordination of the tethered pyridyl arm to the heme-superoxo complex as axial base ligand is suggested. In coordinating solvents such as THF, reversible oxygenation (193 K) of ((6)L)Fe(II) (1) [UV-vis: lambda(max) = 424 (Soret), 542 nm] also occurs to give a similar adduct ((6)L)Fe(III)-(O(2)(-)) (2) [UV-vis: lambda(max) = 418 (Soret), 537 nm. (2)H NMR: delta(pyrrole) 8.9 ppm, 193 K]. Here, we are unable to distinguish between a bound solvent ligand or tethered pyridyl arm as axial base ligand. In all solvents, the dioxygen adducts decompose (thermally) to the ferric-hydroxy complex ((6)L)Fe(III)-OH (3) [UV-vis: lambda(max) = 412-414 (Soret), 566-575 nm; approximately delta(pyrrole) 120 ppm at 193 K]. This study on the O(2)-binding chemistry of the heme-only homonuclear ((6)L)Fe(II) (1) system lays the foundation for a more complete understanding of the dioxygen reactivity of heterobinuclear heme-Cu complexes, such as [((6)L)Fe(II)Cu(I)](+), which are models for cytochrome c oxidase.     

Direct electron transfer for hemoglobin in biomembrane-like dimyristoyl phosphatidylcholine films on pyrolytic graphite electrodes

Stable thin films made from dimyristoyl phosphatidylcholine (DMPC) with incorporated hemoglobin (Hb) on pyrolytic graphite (PG) electrodes were characterized by electrochemical and other techniques. Cyclic voltammetry (CV) of Hb-DMPC films showed a pair of well-defined and nearly reversible peaks at about -0.27 V vs. saturated calomel electrode (SCE) at pH 5.5, characteristic of Hb heme Fe(III)/Fe(II) redox couple. The electron transfer between Hb and PG electrodes was greatly facilitated in DMPC films. Apparent heterogeneous rate constants (ks) were estimated by fitting square wave voltammograms of Hb-DMPC films to a model featuring thin layer behavior and dispersion of formal potentials for redox center. The formal potential of Hb heme Fe(III)/Fe(II) couple in DMPC films shifted linearly between pH 4.5 to 11 with a slope of -48 mV pH-1, suggesting that one proton is coupled to each electron transfer in the electrochemical reaction. Soret absorption band positions suggest that Hb retains a near native conformation in DMPC films at medium pH. Differential scanning calorimetry (DSC) showed the phase transition for DMPC and Hb-DMPC films, suggesting DMPC has an ordered multibilayer structure. Trichloroacetic acid (TCA) was catalytically reduced by Hb-DMPC films with significant decreases in the electrode potential required.     

Electrochemical and electrocatalytic properties of myoglobin and hemoglobin incorporated in carboxymethyl cellulose films

Protein-CMC films were made by casting a solution of myoglobin (Mb) or hemoglobin (Hb) and carboxymethyl cellulose (CMC) on pyrolytic graphite electrodes. In pH 7.0 buffers, Mb and Hb incorporated in CMC films gave a pair of well-defined and quasi-reversible cyclic voltammetric peaks at about -0.34 V vs. SCE, respectively, characteristic of heme Fe(III)/Fe(II) redox couples of the proteins. The electrochemical parameters such as apparent standard heterogeneous electron transfer rate constants (k(s)) and formal potentials (E degrees ') were estimated by square wave voltammetry with nonlinear regression analysis. In aqueous solution, stable CMC films absorbed large amounts of water and formed hydrogel. Scanning electron microscopy of the films showed that interaction between Mb or Hb and CMC would make the morphology of dry protein-CMC films different from the CMC films alone. Positions of Soret absorbance band suggest that Mb and Hb in CMC films retain their secondary structure similar to the native states in the medium pH range. Trichloroacetic acid, nitrite, oxygen, and hydrogen peroxide were catalytically reduced at protein-CMC film electrodes.     

A supramolecular receptor of diatomic molecules (O2, CO, NO) in aqueous solution

A per-O-methylated beta-cyclodextrin dimer, Py2CD, was conveniently prepared via two steps: the Williamson reaction of 3,5-bis(bromomethyl)pyridine and beta-cyclodextrin (beta-CD) yielding 2A,2'A-O-[3,5-pyridinediylbis(methylene)bis-beta-cyclodextrin (bisCD) followed by the O-methylation of all the hydroxy groups of the bisCD. Py2CD formed a very stable 1:1 complex (Fe(III)PCD) with [5,10,15,20-tetrakis(p-sulfonatophenyl)porphinato]iron(III) (Fe(III)TPPS) in aqueous solution. Fe(III)PCD was reduced with Na2S2O4 to afford the Fe (II)TPPS/Py2CD complex (Fe(II)PCD). Dioxygen was bound to Fe(II)PCD, the P(1/2)(O2) values being 42.4 +/- 1.6 and 176 +/- 3 Torr at 3 and 25 degrees C, respectively. The k(on)(O2) and k(off)(O2) values for the dioxygen binding were determined to be 1.3 x 10(7) M(-1) s(-1) and 3.8 x 10(3) s(-1), respectively, at 25 degrees C. Although the dioxygen adduct was not very stable (K(O2) = k(on)(O2)/k(off)(O2) = 3.4 x 10(3) M(-1)), no autoxidation of the dioxygen adduct of Fe(II)PCD to Fe(III)PCD was observed. These results suggest that the encapsulation of Fe (II)TPPS by Py2CD strictly inhibits not only the extrusion of dioxygen from the cyclodextrin cage but also the penetration of a water molecule into the cage. The carbon monoxide affinity of Fe(II)PCD was much higher than the dioxygen affinity; the P(1/2)(CO), k(on)(CO), k(off)(CO), and K(CO) values being (1.6 +/- 0.2) x 10(-2) Torr, 2.4 x 10(6) M(-1) s(-1), 4.8 x 10(-2) s(-1), and 5.0 x 10(7) M(-1), respectively, at 25 degrees C. Fe(II)PCD also bound nitric oxide. The rate of the dissociation of NO from (NO)Fe(II)PCD ((5.58 +/- 0.42) x 10(-5) s(-1)) was in good agreement with the maximum rate ((5.12 +/- 0.18) x 10(-5) s(-1)) of the oxidation of (NO)Fe(II)PCD to Fe(III)PCD and NO3(-), suggesting that the autoxidation of (NO)Fe(II)PCD proceeds through the ligand exchange between NO and O2 followed by the rapid reaction of (O2)Fe(II)PCD with released NO, affording Fe(II)PCD and the NO3(-) anion inside the cyclodextrin cage.     

Superoxide reactivity of KatG: insights into isoniazid resistance pathways in TB

To gain insight into the mechanism of INH activation by KatG and to understand how resistance is conferred by the single active-site point mutation of KatG(S315T), we have employed pulse radiolysis as the means to initiate a catalytic pathway capable of mimicking the in vivo oxidation of isoniazid (INH). Radiolysis of a solution containing WT KatG revealed two intermediates: compound III (oxyferrous KatG) [415 (Soret), 545, 580 nm] formed [k1 = (4.47 +/- 0.91) x 105 M-1 s-1] in the absence of INH and compound II (410 (Soret), 540, 575 nm) formed [k1 = (4.43 +/- 0.69) x 105 M-1 s-1] in the presence of INH, with a comparison of the rates suggesting that compound III (rate-limiting) precedes compound II formation. By contrast, radiolysis of KatG(S315T) only led to compound III formation, whether INH was present [k1 = (4.72 +/- 0.99) x 105 M-1 s-1] or not [k1 = (4.51 +/- 1.38) x 105 M-1 s-1]. HPLC studies to determine the rates of INH-NADH adduct formation (an inhibitor of InhA) as catalyzed by KatG were also performed employing various oxidants: air [WT: (7.18 +/- 1.25) x 10-4, S315T: (0.74 +/- 0.39) x 10-4], superoxide (SOTS-1) [WT: (9.22 +/- 1.10) x 10-4, S315T: not detected], and tert-butylhydroperoxide [WT: (20.5 +/- 1.13) x 10-4, S315T: (10.15 +/- 0.19) x 10-4]. Taken together, the results from the pulse radiolysis work as well as the InhA inhibitor studies allow us to propose a mechanism capable of correlating the inability for the oxyferrous intermediate of KatG(S315T) to oxidize ("activate") INH to the suppressed formation of the INH-NADH adduct, thereby leading to INH resistance in Mycobacterium tuberculosis.     

Heme/non-heme diiron(II) complexes and O2, CO, and NO adducts as reduced and substrate-bound models for the active site of bacterial nitric oxide reductase

As a first generation model for the reactive reduced active-site form of bacterial nitric oxide reductase, a heme/non-heme diiron(II) complex [(6L)Fe(II)...Fe(II)-(Cl)]+ (2) {where 6L = partially fluorinated tetraphenylporphyrin with a tethered tetradentate TMPA chelate; TMPA = tris(2-pyridyl)amine} was generated by reduction of the corresponding mu-oxo diferric compound [(6L)Fe(III)-O-Fe(III)-Cl]+ (1). Coordination chemistry models for reactions of reduced NOR with O2, CO, and NO were also developed. With O2 and CO, adducts are formed, [(6L)Fe(III)(O2-))(thf)...Fe(II)-Cl]B(C6F5)4 (2a x O2) {lambda(max) 418 (Soret), 536 nm; nu(O-O) = 1176 cm(-1), nu(Fe-O) = 574 cm(-1) and [(6L)Fe(II)(CO)(thf)Fe(II)-Cl]B(C6F5)4 (2a x CO) {nu(CO) 1969 cm(-1)}, respectively. Reaction of purified nitric oxide with 2 leads to the dinitrosyl complex [(6L)Fe(NO)Fe(NO)-Cl]B(C6F5)4 (2a x (NO)2) with nu(NO) absorptions at 1798 cm(-1) (non-heme Fe-NO) and 1689 cm(-1) (heme-NO).     

Methionine ligand lability of type I cytochromes c: detection of ligand loss using protein film voltammetry

Protein film voltammetry (PFV) is used to interrogate the behavior of a variety of bacterial and mitochondrial His/Met-ligated cytochromes c. While analogous studies upon alkanethiol-modified gold electrodes reveal the anticipated Fe(II/III) couple only, PFV using pyrolytic graphite edge (PGE) electrodes demonstrates the presence of a lower-potential form of each of the cyts c studied, with a potential of approximately -100 mV (vs hydrogen). The generation of the novel, lower-potential state is shown to arise specifically from the interaction with the PGE electrode. Simultaneously, the typical Fe(II/III) couple can be observed. PFV of a series of wild-type cytochromes and mutants in the Met-donating loop show that the lower-potential state is highly similar between proteins from Pseudomonas aeruginosa (PA), Hydrogenobacter thermophilus (HT), and horse heart. The generation of the lower-potential form correlates inversely with the stability of the Met-Fe interaction for each of the cytochromes. Comparison with chemically unfolded cyts c indicates that the lower-potential forms detected here are unique, and this distinct state is ascribed to the loss of the Met ligand. Thus, PGE is demonstrated to be a non-innocent electrode surface in PFV studies of His/Met-ligated cytochromes c.     

Electrochemistry and Electrocatalysis with Myoglobin in Biomembrane-Like DHP-PDDA Polyelectrolyte-Surfactant Complex Films

The polyelectrolyte-surfactant complex DHP-PDDA was prepared by reacting the anionic surfactant dihexadecylphosphate (DHP) with polycationic poly(diallyldimethylammonium) (PDDA). Thin films made from DHP-PDDA on solid substrates demonstrated an ordered multibilayer structure by XRD and DSC. Incorporated myoglobin (Mb) in DHP-PDDA films on pyrolytic graphite (PG) electrodes showed a pair of well-defined and nearly reversible cyclic voltammetric peaks for the Mb Fe(III)/Fe(II) couple at about -0.3 V vs SCE in pH 7.0 buffers. Electron transfer between Mb and PG electrodes was greatly facilitated in the film microenvironment. The positions of the Soret absorption band suggest that Mb maintains its secondary structure similar to its native state in DHP-PDDA films in the medium pH range. Mb could act as an enzyme-like catalyst in DHP-PDDA films as demonstrated by catalytic reduction of trichloroacetic acid, nitrite, and oxygen with a decrease in the electrode potentials required. Mb-DHP-PDDA films may thus have potential application as biosensors. Copyright 2001 Academic Press.     

Reactivity of molecular dioxygen towards a series of isostructural dichloroiron(III) complexes with tripodal tetraamine ligands: general access to mu-oxodiiron(III) complexes and effect of alpha-fluorination on the reaction kinetics

We have synthesized the mono, di-, and tri-alpha-fluoro ligands in the tris(2-pyridylmethyl)amine (TPA) series, namely, FTPA, F(2)TPA and F(3)TPA, respectively. Fluorination at the alpha-position of these nitrogen-containing tripods shifts the oxidation potential of the ligand by 45-70 mV per added fluorine atom. The crystal structures of the dichloroiron(II) complexes with FTPA and F(2)TPA reveal that the iron center lies in a distorted octahedral geometry comparable to that already found in TPAFeCl(2). All spectroscopic data indicate that the geometry is retained in solution. These three isostructural complexes all react with molecular dioxygen to yield stable mu-oxodiiron(III) complexes. Crystal structure analyses are reported for each of these three mu-oxo compounds. With TPA, a symmetrical structure is obtained for a dicationic compound with the tripod coordinated in the kappa(4)N coordination mode. With FTPA, the compound is a neutral mu-oxodiiron(III) complex with a kappa(3)N coordination mode of the ligand. Oxygenation of the F(2)TPA complex gave a neutral unsymmetrical compound, the structure of which is reminiscent of that already found with the trifluorinated ligand. On reduction, all mu-oxodiiron(III) complexes revert to the starting iron(II) species. The oxygenation reaction parallels the well-known formation of mu-oxo derivatives from dioxygen in the chemistry of porphyrins reported almost three decades ago. The striking feature of the series of iron(II) precursors is the effect of the ligand on the kinetics of oxygenation of the complexes. Whereas the parent complex undergoes 90 % conversion over 40 h, the monofluorinated ligand provides a complex that has fully reacted after 30 h, whereas the reaction time for the complex with the difluorinated ligand is only 10 h. Analysis of the spectroscopic data reveals that formation of the mu-oxo complexes proceeds in two distinct reversible kinetic steps with k(1) approximately 10 k(2). For TPAFeCl(2) and FTPAFeCl(2) only small variations in the k(1) and k(2) values are observed. By contrast, F(2)TPAFeCl(2) exhibits k(1) and k(2) values that are ten times higher. These differences in kinetics are interpreted in the light of structural and electronic effects, especially the Lewis acidity at the metal center. Our results suggest coordination of dioxygen as an initial step in the process leading to formation of mu-oxodiiron(III) compounds, by contrast with an unlikely outer-sphere reduction of dioxygen, which generally occurs at negative potentials.     

Oxidation of iodide by a series of Fe(III) complexes in acetonitrile

The oxidations of iodide by [Fe(III)(bpy)2(CN)2]NO3, [Fe(III)(dmbpy)2(CN)2]NO3, [Fe(III)(CH3Cp)2]PF6, and [Fe(III)(5-Cl-phen)2(CN)2]NO3 at 25 degrees C, ionic strength of 0.10 M in acetonitrile, are catalyzed by trace levels of copper ions. This copper catalysis can be effectively masked with the addition of 5.0 mM 2,2'-bipyridine (bpy), which permits the rate law of the direct reactions to be determined: -d[Fe(III)]/dt = 2(k1[I-] + k2[I-]2)[Fe(III)]. According to 1H NMR and UV-vis spectra, the products of the reaction are I3- and the corresponding Fe(II) complexes, with the stoichiometric ratio (delta[I3-]/delta[Fe(II)]) of 1:2. Linear free-energy relationships (LFERs) are obtained for both log k1 and log k2 vs E(1/2) with slopes of 16.1 and 13.3 V(-1), respectively. A mechanism is inferred in which k1 corresponds to simple electron transfer to form I* plus Fe(II), while k2 leads directly to I2(-*). From the mild kinetic inhibition of the k1 path by [Fe(II)(bpy)2(CN)2] the standard potential (Eo) of I*/I- is derived: Eo = 0.60 +/- 0.01 V (vs [Fe(Cp)2](+/0)).     

Spectroscopy and electrochemistry of cytochrome P450 BM3-surfactant film assemblies

We report analyses of electrochemical and spectroscopic measurements on cytochrome P450 BM3 (BM3) in didodecyldimethylammonium bromide (DDAB) surfactant films. Electronic absorption spectra of BM3-DDAB films on silica slides reveal the characteristic low-spin FeIII heme absorption maximum at 418 nm. A prominent peak in the absorption spectrum of BM3 FeII-CO in a DDAB dispersion is at 448 nm; in spectra of aged samples, a shoulder at approximately 420 nm is present. Infrared absorption spectra of the BM3 FeII-CO complex in DDAB dispersions feature a time-dependent shift of the carbonyl stretching frequency from 1950 to 2080 cm(-1). Voltammetry of BM3-DDAB films on graphite electrodes gave the following results: FeIII/II E(1/2) at -260 mV (vs SCE), approximately 300 mV positive of the value measured in solution; DeltaS degrees (rc), DeltaS degrees , and DeltaH degrees values for water-ligated BM3 in DDAB are -98 J mol(-1) K(-1), -163 J mol(-1) K(-1), and -47 kJ mol(-1), respectively; values for the imidazole-ligated enzyme are -8 J mol(-1) K(-1), -73 J mol(-1) K(-1), and -21 kJ mol(-1). Taken together, the data suggest that BM3 adopts a compact conformation within DDAB that in turn strengthens hydrogen bonding interactions with the heme axial cysteine, producing a P420-like species with decreased electron density around the metal center.     

Imidazole and imidazolate iron complexes: on the way for tuning 3D-structural characteristics and reactivity. Redox interconversions controlled by protonation state

X-ray structures for six Fe(II) and Fe(III) complexes from two closely heptadentate N-tripodal ligands, L1H(3) = tris[(imidazol-4-yl)-3-aza-3-butenyl]amine and L2H(3) = tris[(imidazol-2-yl)-3-aza-3-butenyl]amine, are described: three complexes in the L1 series (namely, [Fe(II)(L1H(3))](2+) and [Fe(III)(L1H(3))](3+) at low pH and [Fe(III)(L1)](0) at high pH) and three complexes in the L2 series (namely, [Fe(II)(L2H(3))](2+) at low pH and [Fe(II)(L2H)](0) and [Fe(III)(L2)](0) at high pH). Most of these complexes are stable in both Fe(II) and Fe(III) redox states and with the ligand in various protonation states. In the solid state, hydrogen bonds networks were obtained. Structural differences induced by 2- or 4-imidazole substitution are described and discussed. In solution, interconversions between different forms, with regard to oxidation and protonation states, were investigated by UV-visible spectroscopy, cyclic voltammetry, and potentiometry. The deprotonation pattern of these polyimidazole iron(II) and iron(III) complexes is described in detail. pK(a)s of the imidazolate/imidazole moieties in MeOH/H(2)O are reported. Two new species, namely, [Fe(II)(L1)](-) and [Fe(II)(L2)](-), were shown to be obtained in DMSO upon strong base addition and characterized by UV-vis spectroscopy and cyclic voltammetry. Half-wave potentials of Fe(III)/Fe(II) complexes with ligand moieties in several protonation states are reported, both in DMSO and in MeOH/H(2)O. Because of the presence of free imidazole groups coordinated to the iron, the potential of the iron(III)/iron(II) couples can be tuned by pH. A shift of DeltaE = E(deprot) - E(prot) ranging from -270 to -320 mV per exchanged proton in DMSO was measured. This study shows moreover that interconversions (with regard to both redox and protonation states) can be reversed several times. As the complexes have been isolated in order to be tested as superoxide dismutase mimics, preliminary reactions with dioxygen and with superoxide, considered as oxidant and reducer of biological importance, are reported. In these two series, O(2)(-) behaves either as a base or as a reducer and no adducts have been observed.     

Studies of iron(II) and iron(III) complexes with fac-N2O, cis-N2O2 and N2O3 donor ligands: models for the 2-His 1-carboxylate motif of non-heme iron monooxygenases

Enzymes in the oxygen-activating class of mononuclear non-heme iron oxygenases (MNOs) contain a highly conserved iron center facially ligated by two histidine nitrogen atoms and one carboxylate oxygen atom that leave one face of the metal center (three binding sites) open for coordination to cofactor, substrate, and/or dioxygen. A comparative family of [Fe(II/III)(N(2)O(n))(L)(4-n))](±x), n = 1-3, L = solvent or Cl(-), model complexes, based on a ligand series that supports a facially ligated N,N,O core that is then modified to contain either one or two additional carboxylate chelate arms, has been structurally and spectroscopically characterized. EPR studies demonstrate that the high-spin d(5) Fe(III)g = 4.3 signal becomes more symmetrical as the number of carboxylate ligands decreases across the series Fe(N(2)O(3)), Fe(N(2)O(2)), and Fe(N(2)O(1)), reflecting an increase in the E/D strain of these complexes as the number of exchangeable/solvent coordination sites increases, paralleling the enhanced distribution of electronic structures that contribute to the spectral line shape. The observed systematic variations in the Fe(II)-Fe(III) oxidation-reduction potentials illustrate the fundamental influence of differential carboxylate ligation. The trend towards lower reduction potential for the iron center across the [Fe(III)(N(2)O(1))Cl(3)](-), [Fe(III)(N(2)O(2))Cl(2)](-) and [Fe(III)(N(2)O(3))Cl](-) series is consistent with replacement of the chloride anions with the more strongly donating anionic O-donor carboxylate ligands that are expected to stabilize the oxidized ferric state. This electrochemical trend parallels the observed dioxygen sensitivity of the three ferrous complexes (Fe(II)(N(2)O(1)) < Fe(II)(N(2)O(2)) < Fe(II)(N(2)O(3))), which form μ-oxo bridged ferric species upon exposure to air or oxygen atom donor (OAD) molecules. The observed oxygen sensitivity is particularly interesting and discussed in the context of α-ketoglutarate-dependent MNO enzyme mechanisms.     

Electrochemistry of cytochrome P450 BM3 in sodium dodecyl sulfate films

Direct electrochemistry of the cytochrome P450 BM3 heme domain (BM3) was achieved by confining the protein within sodium dodecyl sulfate (SDS) films on the surface of basal-plane graphite (BPG) electrodes. Cyclic voltammetry revealed the heme FeIII/II redox couple at -330 mV (vs Ag/AgCl, pH 7.4). Up to 10 V/s, the peak current was linear with the scan rate, allowing us to treat the system as surface-confined within this regime. The standard heterogeneous rate constant determined at 10 V/s was estimated to be 10 s-1. Voltammograms obtained for the BM3-SDS-BPG system in the presence of dioxygen exhibited catalytic waves at the onset of FeIII reduction. The altered heme reduction potential of the BM3-SDS-graphite system indicates that SDS is likely bound in the enzyme active-site region. Compared to other P450-surfactant systems, we find redox potentials and electron-transfer rates that differ by approximately 100 mV and >10-fold, respectively, indicating that the nature of the surfactant environment has a significant effect on the observed heme redox properties.     

Dioxygen Reactivity of Biomimetic Iron-Catecholate and Iron-o-Aminophenolate Complexes of a Tris(2-pyridylthio)methanido Ligand: Aromatic CC Bond Cleavage of Catecholate versus o-Iminobenzosemiquinonate Radical Formation

An iron(III)-catecholate complex [L(1) Fe(III) (DBC)] (2) and an iron(II)-o-aminophenolate complex [L(1) Fe(II) (HAP)] (3; where L(1) =tris(2-pyridylthio)methanido anion, DBC=dianionic 3,5-di-tert-butylcatecholate, and HAP=monoanionic 4,6-di-tert-butyl-2-aminophenolate) have been synthesised from an iron(II)-acetonitrile complex [L(1) Fe(II) (CH(3) CN)(2) ](ClO(4) ) (1). Complex 2 reacts with dioxygen to oxidatively cleave the aromatic C?C bond of DBC giving rise to selective extradiol cleavage products. Controlled chemical or electrochemical oxidation of 2, on the other hand, forms an iron(III)-semiquinone radical complex [L(1) Fe(III) (SQ)](PF(6) ) (2(ox) -PF(6) ; SQ=3,5-di-tert-butylsemiquinonate). The iron(II)-o-aminophenolate complex (3) reacts with dioxygen to afford an iron(III)-o-iminosemiquinonato radical complex [L(1) Fe(III) (ISQ)](ClO(4) ) (3(ox) -ClO(4) ; ISQ=4,6-di-tert-butyl-o-iminobenzosemiquinonato radical) via an iron(III)-o-amidophenolate intermediate species. Structural characterisations of 1, 2, 2(ox) and 3(ox) reveal the presence of a strong iron?carbon bonding interaction in all the complexes. The bond parameters of 2(ox) and 3(ox) clearly establish the radical nature of catecholate- and o-aminophenolate-derived ligand, respectively. The effect of iron?carbon bonding interaction on the dioxygen reactivity of biomimetic iron-catecholate and iron-o-aminophenolate complexes is discussed.     

Synthesis and characterization of reduced heme and heme/copper carbonmonoxy species

Carbon monoxide readily binds to heme and copper proteins, acting as a competitive inhibitor of dioxygen. As such, CO serves as a probe of protein metal active sites. In our ongoing efforts to mimic the active site of cytochrome c oxidase, reactivity toward carbon monoxide offers a unique opportunity to gain insight into the binding and spectroscopic characteristics of synthetic model compounds. In this paper, we report the synthesis and characterization of CO-adducts of ((5/6)L)Fe(II), [((5/6)L)Fe(II)...Cu(I)](B(C(6)F(5))(4)), and [(TMPA)Cu(I)(CH(3)CN)](B(C(6)F(5))(4)), where TMPA = tris(2-pyridylmethyl)amine and (5/6)L = a tetraarylporphyrinate tethered in either the 5-position ((5)L) or 6-position ((6)L) to a TMPA copper binding moiety. Reaction of ((5/6)L)Fe(II) [in THF (293 K): UV-vis 424 (Soret), 543-544 nm; (1)H NMR delta(pyrrole) 52-59 ppm (4 peaks); (2)H NMR (from ((5)L-d(8))Fe(II)) delta(pyrrole) 53.3, 54.5, 55.8, 56.4 ppm] with CO in solution at RT yielded ((5/6)L)Fe(II)-CO [in THF (293 K): UV-vis 413-414 (Soret), 532-533 nm; IR nu(CO)(Fe) 1976-1978 cm(-1); (1)H NMR delta(pyrrole) 8.8 ppm; (2)H NMR (from ((5)L-d(8))Fe(II)-CO) delta(pyrrole) 8.9 ppm; (13)C NMR delta((CO)Fe) 206.8-207.1 ppm (2 peaks)]. Experiments repeated in acetonitrile, acetone, toluene, and dichloromethane showed similar spectroscopic data. Binding of CO resulted in a change from five-coordinate, high-spin Fe(II) to six-coordinate, low-spin Fe(II), as evidenced by the upfield shift of the pyrrole resonances to the diamagnetic region ((1)H and (2)H NMR spectra). Addition of CO to [((5/6)L)Fe(II)...Cu(I)](B(C(6)F(5))(4)) [in THF (293 K): UV-vis ((6)L only) 424 (Soret), 546 nm; (1)H NMR delta(pyrrole) 54-59 ppm (multiple peaks); (2)H NMR (from [((5)L-d(8))Fe(II).Cu(I)](B(C(6)F(5))(4))) delta(pyrrole) 53.4 ppm (br)] gave the bis-carbonyl adduct [((5/6)L)Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4)) [in THF (293 K): UV-vis ((6)L only) 413 (Soret), 532 nm; IR nu(CO)(Fe) 1971-1973 cm(-1), nu(CO)(Cu) 2091-2093 cm(-1), approximately 2070(sh) cm(-1); (1)H NMR delta(pyrrole) 8.7-8.9 ppm; (2)H NMR (from [((5)L-d(8))Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4))) delta(pyrrole) 8.9 ppm; (13)C NMR delta((CO)Fe) 206.8-208.1 ppm (2 peaks), delta((CO)Cu) 172.4 ((5)L), 178.2 ((6)L) ppm]. Experiments in acetonitrile, acetone, and toluene exhibited spectral features similar to those reported. The [((5/6)L)Fe(II)-CO.Cu(I)-CO](B(C(6)F(5))(4)) compounds yielded (CO)(Fe) spectra analogous to those seen for ((5/6)L)Fe(II)-CO and (CO)(Cu) spectra similar to those seen for [(TMPA)Cu(I)-CO](B(C(6)F(5))(4)) [in THF (293 K): IR nu(CO)(Cu) 2091 cm(-1), approximately 2070(sh) cm(-1); (13)C NMR delta((CO)Cu) 180.3 ppm]. Additional IR studies were performed in which the [((5)L)Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4)) in solution was bubbled with argon in an attempt to generate the iron-only mono-carbonyl [((5)L)Fe(II)-CO.Cu(I)](B(C(6)F(5))(4)) species; in coordinating solvent or with axial base present, decreases in characteristic IR-band intensities revealed complete loss of CO from copper and variable loss of CO from the heme.     

Synthesis,structure, properties,and phosphatase-like activity of the first heterodinuclear Fe(III)Mn(II) complex with the unsymmetric ligand H(2)BPBPMP as a model for the PAP in sweet potato

The new heterodinuclear mixed valence complex [Fe(III)Mn(II)(BPBPMP)(OAc)(2)]ClO(4) (1) with the unsymmetrical N(5)O(2) donor ligand 2-bis[((2-pyridylmethyl)-aminomethyl)-6-((2-hydroxybenzyl)(2-pyridylmethyl))-aminomethyl]-4-methylphenol (H(2)BPBPMP) has been synthesized and characterized. Compound 1 crystallizes in the monoclinic system, space group P2(1)/c, and has an Fe(III)Mn(II)(mu-phenoxo)-bis(mu-carboxylato) core. Two quasireversible electron transfers at -870 and +440 mV versus Fc/Fc(+) corresponding to the Fe(II)Mn(II)/Fe(III)Mn(II) and Fe(III)Mn(II)/Fe(III)Mn(III) couples, respectively, appear in the cyclic voltammogram. The dinuclear Fe(III)Mn(II) center has weakly antiferromagnetic coupling with J = -6.8 cm(-1) and g = 1.93. The (57)Fe M?ssbauer spectrum exhibits a single doublet, delta = 0.48 mm s(-1) and DeltaE(Q) = 1.04 mm s(-1) for the high spin Fe(III) ion. Phosphatase-like activity at pH 6.7 with the substrate 2,4-bis(dinitrophenyl)phosphate reveals saturation kinetics with the following Michaelis-Menten constants: K(m) = 2.103 mM, V(max) = 1.803 x 10(-5) mM s(-1), and k(cat) = 4.51 x 10(-4) s(-1).     

Electronic Structure and Substitution and Redox Reactivity of Imidazolate-Bridged Complexes of Pentacyanoferrate and Pentaammineruthenium

The mixed-valence compound [(NC)(5)Fe(II)-Im-Ru(III)(NH(3))(5)](-),M(i), was prepared in solution and as a solid sodium salt from [Fe(CN)(5)H(2)O](3)(-) and [Ru(NH(3))(5)Im](2+). The binuclear complex shows two bands at 366 nm (epsilon = 3350 M(-)(1) cm(-)(1)) and 576 nm (epsilon = 1025 M(-)(1) cm(-)(1)), assigned as LMCT transitions, as well as a near-IR band at 979 nm (epsilon = 962 M(-)(1) cm(-)(1)) associated with an intervalence transition. By calculation of the Hush model parameters alpha(2) and H(ab) (delocalization and electronic coupling factors, respectively), the complex is defined as a valence-trapped Fe(II)-Ru(III) system; this is confirmed by the measured redox potentials at -0.20 V and 0.30 V, associated with redox processes at the ruthenium and iron center, respectively. The formation stability constant of the mixed-valence ion was obtained through independent measurements of k(f) and k(d), the formation and dissociation specific rate constants, respectively. The stabilization of M(i) with respect to disproportionation into the isovalent states, as well as toward the formation of the electronic isomer, Fe(III)-Im-Ru(II), was also estimated. The fully reduced (R(i)) and fully oxidized (O(i)) binuclear complexes were prepared in solution and characterized by UV-vis spectroscopy. The kinetics of the reactions of R(i) and M(i) with peroxydisulfate were measured and a mechanistic analysis was performed, showing the relevance of electronic isomerization in completing the full conversion to O(i), through the assistance of the Ru(II)(NH(3))(5)(2+) center in the oxidation of the neighboring Fe(II)(CN)(5)(3)(-) moiety. The latter results are compared with those obtained with related complexes comprising different X(5)M-L moieties bound to Ru(II)(NH(3))(5)(2+). A linear correlation is displayed by plotting ln k(et) against E degrees (Ru), associated with the intramolecular oxidation rate constant of Ru(II) in the ion pair (binuclear species + peroxydisulfate) and the reduction potential of the corresponding Ru(III,II) couple in the ion pair.     

肌红蛋白在双十二烷基二甲基溴化铵-粘土多双层复合薄膜电极上的电化学与电催化

将双十二烷基二甲基溴化铵(DDAB)-粘土(Clay)复合物的水分散系与肌红蛋白(Mb)水溶液的混合物涂布到热解石墨(PG)电极表面,可制得Mb-DDAB-Clay薄膜电极.在pH5.5的缓冲溶液中,该薄膜电极在-0.25V(vs.SCE)处有一对可逆的循环伏安还原氧化峰,为Mb血红素辅基Fe(Ⅲ)/Fe(Ⅱ)电对的特征峰.在DDAB-Clay薄膜的微环境中,Mb与PG电极之间的电子传递得到极大促进,并显示了很好的稳定性.Soret吸收带的位置表明,在适中的pH范围内,Mb在薄膜中保持了其原始构象.X射线衍射实验结果表明,Mb的嵌入并未对薄膜的有序多层结构有很大影响.在DDAB-Clay薄膜环境中,Mb血红素Fe(Ⅲ)/Fe(Ⅱ)电对的式量电位在pH4.5～11.0范围内与溶液pH值成线性关系,表明Mb的电化学还原很可能是一个质子伴随一个电子的电极过程.Mb-DDAB-Clay薄膜可以用于催化还原溶解氧和三氯乙酸.     

Myoglobin/sol-gel film modified electrode: direct electrochemistry and electrochemical catalysis

Direct electrochemical and electrocatalytic behavior of myoglobin (Mb) immobilized on carbon paste electrode (CPE) by a silica sol-gel film derived from tetraethyl orthosilicate was investigated for the first time. Mb/sol-gel film modified electrodes show a pair of well-defined and nearly reversible cyclic voltammetric peaks for the Mb Fe(III)/Fe(II) redox couple at about -0.298 V (vs Ag/AgCl) in a pH 7.0 phosphate buffer solution. The formal potential of the Mb heme Fe(III)/Fe(II) couple shifted linearly with pH with a slope of 52.4 mV/pH, denoting that an electron transfer accompanies single-proton transportation. An FTIR and UV-vis spectroscopy study confirms that the secondary structure of Mb immobilized on an electrode by a sol-gel film still maintains the original arrangement. The immobilized Mb displays the features of a peroxidase and acts in an electrocatalytic manner in the reduction of oxygen, trichloroacetic acid (TCA), and nitrite. In comparison to other electrodes, the chemically modified electrodes used in this study for direct electrochemistry and electrocatalysis of Mb are easy to fabricate and fairly inexpensive. Consequently, the Mb/sol-gel film modified electrode provides a convenient way to perform electrochemical research on this kind of protein. It also has potential use in the fabrication of bioreactors and third-generation biosensors.