Thin film characterisation using backscattering spectrometry

The use of proton resonance backscattering spectrometry for the estimation of carbon as thin films formed on a target material is discussed. Conventional He backscattering experiments were also carried out on TiVN films formed on beryllium backing but the determination of stoichiometry of these films were difficult using conventional software for depth resolution.     

Practical methods to control morphology of heterogeneous polymer particles

This review focusses on processes in which emulsion polymerizations are carried out in stages so that previously formed particles are either overcoated in subsequent polymerization stages or engulf the second and later stage polymers. These products are often called “core-shell” particles. Basically, the most stable state of the final system is the one with the lowest net interfacial energy. In the case of a two-stage emulsion polymerization there can be three interfacial tensions to consider. Several mutually consistent, effective thermodynamic treatments have been published. At present, they serve primarily to predict when the morphology of multi-stage polymerization products may not be a simple reflection of the synthesis sequences. It is possible, and frequently desirable, however to produce particle structures that appear at first glance to be thermodynamically forbidden. This is achieved either by changing the surface characteristics of a polymer from those of the bulk material or by employing kinetic factors to anchor energetically unprofitable morphologies. This paper summarizes methods of both types that have been reported to control the texture of structured latex particles in order to produce designed morphologies.     

Characterization of chromate conversion film on tinplate substrate by XPS and electrochemistry methods

The chromate conversion coating formed on commercial tinplate via a cathode electrolytic dichromate treatment has been studied by X‐ray photoelectron spectroscopy (XPS) and electrochemistry methods. Through the analysis of the XPS, it was shown that there existed Cr, O, and Sn in the chromate coating and the chromate film consisted mainly of Cr(OH)₃, Cr₂O₃, Sn, and SnO_x. The current density decreased with increasing of the electric charge. The corrosion resistance for tinplate is relative with the content of chromium in the passivation film. Copyright © 2009 John Wiley & Sons, Ltd.     

Hyperbranched ferrocenyl polymer film with high charge transport efficiency

The electrochemical behaviors of hyperbranched poly(ferrocenyl-methylsilane) (HPFMS) and linear oligo(ferrocenyldimethylsilane) (LOFS) films were studied systematically by cyclic voltammetry and chronocoulometry under different polymer coverage and solvents. Both poly(ferrocenylsilanes) show stable cyclic voltammographs in LiClO 4 solutions. Compared with LOFS films, HPFMS films exhibit higher charge transport efficiency because of their hyperbranched structure: peak current ( i p) and apparent diffusion coefficient ( D app) for HPFMS films are larger than those for LOFS films, especially at high polymer coverage (3.8 x 10 (-11) vs 3.9 x 10 (-12) cm (2)/s for HPFMS and LOFS film at the coverage of 2.1 x 10 (-6) mol Fc/cm (2)). The conceptual models of electrode processes for HPFMS and LOFS films were proposed to account for higher charge transport efficiency of HPFMS films. It is also found that a solvent with the appropriate solubility parameter and polarity, lower viscosity, and higher dielectric constant is in favor of charge transport through polymer films, which is consistent with the proposed model of electrode process for HPFMS films. These results imply that hyperbranched ferrocenyl polymers have the potential to be excellent chemical sensor materials with convenient synthesis and high sensitivity.     

Mathematical topographical correction of XPS images using multivariate statistical methods

For rough heterogeneous samples, the contrast observed in XPS images may result from both changes in elemental or chemical composition and sample topography. Background image acquisition and subtraction are frequently utilized to minimize topographical effects so that images represent concentration variations in the sample. This procedure may significantly increase the data acquisition time. Multivariate statistical methods can assist in resolving topographical and chemical information from multispectral XPS images. Principal component analysis (PCA) is one method for identification of the highest correlation/variation between the images. Topography, which is common to all of the images, will be resolved in the first most significant component. The score of this component contains spatial information about the topography of the surface, whereas the loading is a quantitative representation of the topography contribution to each elemental/chemical image. The simple‐to‐use self‐modelling mixture analysis (Simplisma) method is a pure variable method that searches for the source of most differences in the data and therefore has the potential to distinguish between chemical and topographical phases in images. The mathematical background correction scheme is developed and validated by comparing results to the experimental background correction for samples with differing degrees of topography. Copyright © 2004 John Wiley & Sons, Ltd.     

Practical estimation of XPS binding energies using widely available quantum chemistry software

Chemical shifts observed in high‐resolution X‐ray photoelectron spectroscopy (XPS) spectra are normally used to determine the chemical state of the elements of interest. Often, these shifts are small, or an element is present in several oxidation states in the same sample, so that interpretation of the spectra is difficult without good reference data on binding energies of the likely constituents. In many cases, reference spectra taken from pure reference samples of the chemical components can aid the peak fitting procedure. However, reference materials are not always available, so that it becomes necessary to estimate the binding energies of likely components through quantum chemical calculations. In principle, such calculations have become much easier than in the past, due to the availability of powerful personal computers and excellent software. In practice, though, care needs to be taken in the approximations, assumptions, and settings used in applying such software to calculate binding energies. In this work, we present a general summary of the methods for the calculation of the core electron binding energies and compare the use of 2 of these methods using the popular “GAUSSIAN” software package. Furthermore, a series of results for molecules, containing elements of the second and the third row of the periodic table, are presented and compared with experimental results, in order to establish the quality and fitness‐for‐purpose of the quantum chemical‐based predictions.     

高效液相色谱法测定聚合物水处理剂中残留的单体

建立了采用高效液相色谱测定聚环氧琥珀酸钠盐(PESA)、丙烯酸/马来酸酐二元共聚物(AA/MA)、聚丙烯酸盐(PAA)、水解聚马来酸钠盐(HPMA)、马来酸酐/丙烯酸/丙烯酸甲酯三元共聚物(MA/AA/MAc)5类聚合物水处理剂中残留单体的方法。以Agilent ZORBAX 300SB-C18柱(5 μm,150 mm×4.6 mm)为分析柱,柱温为30 ℃,流动相为0.01 mol/L KH2PO4溶液(用5%H3PO4调节pH为2.3)-甲醇(体积比为95∶5)进行等度洗脱,检测波长为210 nm,流速为0.6 mL/min,样品用流动相稀释过滤后直接进样分析,10 min内马来酸、富马酸及丙烯酸残留单体获得分离和定量。上述3种残留单体的检出限分别为0.5,0.5和0.2 mg/L,回收率为98.9%～103.7%,相对标准偏差为1.09%～1.69%,相关系数为0.9996～0.9999。实验结果表明,该法简便快速、灵敏可靠,适用于5类聚合物水处理剂中残留单体的测定。     

Realization of high performance polycarbonate-based Li polymer batteries

This work describes effective approaches to achieve high cell performance of solid-state Li polymer batteries based on high-molecular-weight poly(trimethylene carbonate) (PTMC). The origin of a gradual capacity increase observed during passive storage and/or active cycling in LiFePO₄|PTMC_xLiTFSI|Li cells was investigated by SEM/EDX, indicating an obvious penetration of the polymer electrolyte through the porous composite electrode at elevated temperatures. Refining the interfacial contacts at the electrode/electrolyte interface by adding PTMC oligomer as an interfacial mediator led to significant capacity enhancement already during initial cycles. Optimized cell performance was achieved through this method rather than other approaches, such as casting electrolyte directly onto the electrode and using a polyether oligomer. Successful long-term cycling stability and rate capability tests also resulted from the suggested strategy.     

XPS characterisation of carbon‐coated alumina support

Hybrid carbon–alumina supports, synthesised by pyrolysis of grafted 4,4′‐methylenebis‐(phenylisocyanate) moiety on the alumina surface, were characterised by X‐ray photoelectron spectroscopy. The recorded Al 2p and C 1s envelopes showed asymmetry that decreased with an increase in carbon loading. In all experimental Al 2p envelopes, the high‐energy individual components at 75.3–75.9 eV were present along with the low‐energy component at 74.0 eV typical for Al₂O₃. In the case of the C 1s envelope, the component around 284.3–284.4 eV and three high‐energy individual components at 285.9–286.0, 288.0–288.3 and 290.1–290.6 eV were observed. The presence of the high‐energy Al 2p components can be explained considering the occurrence of a steady‐state charging of the different parts of insulating alumina supports. The component around 284.3–284.4 eV in C 1s envelopes can be attributed to carbon, which constitutes the coating and, hence, ensures surface conductivity. The component around 285.9–286.0 eV is connected with carbon in carbonaceous surface species, which do not form the conducting layer on the alumina support. Carbonaceous surface species associated with C? O, C?O and O?C? O groups in carbon coating can be also identified due to the presence of corresponding components in XPS spectra at 285.9–286.0, 288.0–288.3 and 290.1–290.6 eV. Copyright © 2006 John Wiley & Sons, Ltd.     

Regiospecific characterisation of the triacylglycerols in animal fats using high performance liquid chromatography-atmospheric pressure chemical ionisation mass spectrometry

High performance liquid chromatography-atmospheric pressure chemical ionisation mass spectrometry (HPLC-APCI MS) was applied to the characterisation of triacylglycerols (TAGs) in animal fats. The major TAGs in four fats (beef, chicken, lamb and pork) were identified and positional isomers assigned according to their APCI mass spectra. Beef and lamb fat TAGs were confirmed as containing higher proportions of saturated fatty acids compared with those of chicken and pork. HPLC-APCI MS was also shown to be of value in providing regiospecific information for the fatty acids in individual TAG species. For example, beef and lamb fat were shown to contain both cis- and trans-isomers of the 18:1 fatty acid, whilst chicken and pork contained only the cis-isomer. When the position of fatty acid substitution was determined from the APCI spectra, whilst the cis- 18:1 was predominantly found in the 2-position of the TAG, the trans-18:1 showed a preference for the 1/3-position. Similarly, it was confirmed that although the 2-position of beef, chicken and lamb fat TAGs was dominated by unsaturated fatty acids, in pork fat, a characteristically high proportion of palmitic acid was seen in this position. The TAGs identified compared well with those reported previously. The distributions of 2-position fatty acids seen in lamb and pork fat compared favourably with those obtained by the more traditional method of lipase degradation. Although the distributions for chicken and beef showed some discrepancies, these can be attributed to weaknesses in the quantification procedure or the specificity of the lipase. Overall, the technique of HPLC-APCI MS has been shown to be very powerful for the regiospecific analysis of animal fats.     

A hexaazatriphenylene-based porous organic polymer for high performance supercapacitor

Porous organic polymers (POPs) with high physiochemical stability and pseudocapacitive activity are crucial for supercapacitors with high specific capacitance and long cycle life. We report herein a hexaazatrinaphthylene-based POP (HPOP-1) for high-performance supercapacitor by introducing redox-active hexaazatrinaphthylene (HATN) moiety through Sonogashira–Hagihara coupling reaction. HATN moiety can undergo a proton-induced electron transfer redox reaction, which endows HPOP-1 with high pseudocapacitive activity. As electrode materials for supercapacitor application, HPOP-1 exhibits high specific capacitance (667 F g⁻¹ at 0.5 A g⁻¹) and long-term cyclic stability (90% capacitance retention after 10,000 cycles at 5 A g⁻¹) in a three-electrode system with 1 M H₂SO₄ as the electrolyte. In addition, HPOP-1 also exhibits a specific capacitance of 376 F g⁻¹ at 0.5 A g⁻¹ in 1 M KOH electrolyte. An asymmetric supercapacitor was further fabricated with HPOP-1 as negative electrode and rGO as positive electrode, respectively. The device delivers a specific capacitance of 63 F g⁻¹ at 0.5 A g⁻¹ and a rate performance of 37 F g⁻¹ at 5 A g⁻¹. Our work provides a facile approach for the design and preparation of pseudocapacitive POPs with high specific capacitance and long cycle life.     

Fullerene derivative acceptors for high performance polymer solar cells

Polymer solar cells (PSCs) are composed of a blend film of a conjugated polymer donor and a soluble fullerene derivative acceptor sandwiched between a PEDOT?:?PSS coated ITO positive electrode and a low workfunction metal negative electrode. The conjugated polymer donor and the fullerene derivative acceptor are the key photovoltaic materials for high performance PSCs. For the acceptors, although [6,6]-phenyl-C(61)-butyric acid methyl ester (PC(60)BM) and its corresponding C(70) derivative PC(70)BM are dominantly used as the acceptors in PSC at present, several series of new fullerene derivatives with higher-lying LUMO energy level and better solubility were reported in recent years for further improving the power conversion efficiency of the PSCs. In this perspective paper, we reviewed the recent research progress on the new fullerene derivative acceptors, including various PC(60)BM-like C(60) derivatives, PC(60)BM bisadduct, PC(70)BM bisadduct, indene-C(60) bisadduct and indene-C(70) bisadduct, trimetallic nitride endohedral fullerenes and other C(60) derivatives with multi side chains. The synthesis and physicochemical properties of PC(60)BM and PC(70)BM were also introduced considering the importance of the two fullerene acceptors.     

Improvement of gas meter performance using polymer materials

The measuring elements of both dry‐ and wet‐type gas meters are composed of a diaphragm and rotary drum. In this article an explanation on the principle of measuring and the structure of the gas meter for each of these two types was discussed. Such applications were made as follows: synthetic rubber was used for the measuring diaphragm, engineering plastic was employed instead of metal for the measuring drum, and poly(butylene terephthalate) (PBT) was used for the casing, respectively. As a result, an improvement in the gas resistance performance and productivity, which led to a lighter weight, more compactness and a lower cost of productions was achieved. Also the influence of the solubility of the measured gas to the plastic on the measured valve was discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Surface molecular characterisation of different epoxy resin composites subjected to UV accelerated degradation using XPS and ToF-SIMS

Epoxy resin composites reinforced with E-glass (E), 3D glass (3D) and carbon fibre (CF) were subjected to an intense UV and high temperature accelerated degradation environment. X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were used to provide a molecular characterisation of the surface of the degraded composites. The response at the surface of the epoxy resin composites to oxidative degradation is influenced by the composite reinforcement type and characteristics. XPS results indicate that 3D resin composites exhibit more surface oxidation as a result of the accelerated degradation in comparison with E and CF composites. Principal components analysis (PCA) of the ToF-SIMS positive ion spectra showed that E and 3D resin composites suffered chain scission while CF composites suffered chain scission and cross-linking reactions as a result of the intense UV exposure. The extent of the surface oxidation, cross-linking/condensation reaction and loss of low molecular weight (lower than C₄H_x) aliphatic hydrocarbons may be indicated using PCA of both the ToF-SIMS positive and negative ion spectra. PCA also provides insight for proposing epoxy resin chain scission and oxidation reaction mechanisms.     

A furan-containing conjugated polymer for high mobility ambipolar organic thin film transistors

Furan substituted diketopyrrolopyrrole (DBF) combined with benzothiadiazole based polymer semiconductor PDPP-FBF has been synthesized and evaluated as an ambipolar semiconductor in organic thin-film transistors. Hole and electron mobilities as high as 0.20 cm(2) V(-1) s(-1) and 0.56 cm(2) V(-1) s(-1), respectively, are achieved for PDPP-FBF.     

Ambipolar, high performance, acene-based organic thin film transistors

We present a high performance, ambipolar organic field-effect transistor composed of a single material. Ambipolar molecules are rare, and they can enable low-power complementary-like circuits. This low band gap, asymmetric linear acene contains electron-withdrawing fluorine atoms, which lower the molecular orbital energies, allowing the injection of electrons. While hole and electron mobilities of up to 0.071 and 0.37 cm2/V.s, respectively, are reported on devices measured in nitrogen, hole mobilities of up to 0.12 cm2/V.s were found in ambient, with electron transport quenched. These devices were fabricated on octadecyltrimethoxysilane-treated surfaces at a substrate temperature of 60 degrees C.     

Development of a perfusion reversed-phase high performance liquid chromatography method for the characterisation of maize products using multivariate analysis

A perfusion reversed-phase high performance liquid chromatography (RP-HPLC) method has been designed to allow rapid (3.4 min) separations of maize proteins with high resolution. Several factors, such as extraction conditions, temperature, detection wavelength and type and concentration of ion-pairing agent were optimised. A fine optimisation of the gradient elution was also performed by applying experimental design. Commercial maize products for human consumption (flours, precocked flours, fried snacks and extruded snacks) were characterised for the first time by perfusion RP-HPLC and their chromatographic profiles allowed a differentiation among products relating the different technological process used for their preparation. Furthermore, applying discriminant analysis makes it possible to group the samples according with the technological process suffered by maize products, obtaining a good prediction in 92% of the samples.     

AFM,ellipsometry, XPS and TEM on ultra-thin oxide/polymer nanocomposite layers in organic thin film transistors

Here we report on the fabrication and characterization of ultra-thin nanocomposite layers used as gate dielectric in low-voltage and high-performance flexible organic thin film transistors (oTFTs). Reactive sputtered zirconia layers were deposited with low thermal exposure of the substrate and the resulting porous oxide films with high leakage currents were spin-coated with an additional layer of poly-α-methylstyrene (PαMS). After this treatment a strong improvement of the oTFT performance could be observed; leakage currents could be eliminated almost completely. In ellipsometric studies a higher refractive index of the ZrO₂/PαMS layers compared to the “as sputtered” zirconia films could be detected without a significant enhancement of the film thickness. Atomic force microscopy (AFM) measurements of the surface topography clearly showed a surface smoothing after the PαMS coating. Further studies with X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) also indicated that the polymer definitely did not form an extra layer. The polymer chains rather (self-)assemble in the nano-scaled interspaces of the porous oxide film giving an oxide–polymer “nanocomposite” with a high oxide filling grade resulting in high dielectric constants larger than 15. The dielectric strength of more than 1 MV cm⁻¹ is in good accordance with the polymer-filled interspaces.     

Green polymer chemistry: new methods of polymer synthesis using renewable starting materials

The present article reviews the recent results reported mainly from our group on “green polymer chemistry”. Characteristic important aspects of green polymer chemistry include herein, typically (1) using renewable resources as starting materials for polymer production, and (2) employing green method for the polymer synthesis. As renewable starting materials, the following materials were employed; lactic acid, itaconic anhydride, renewable plant oils, and cardanol. Polymer production using these materials contributes to mitigate the carbon dioxide emission because of their “carbon neutral” nature. As green method, lipase enzyme was mainly used for polymerization catalyst, since lipase is a natural benign catalyst, showing a specific catalysis as well as recyclable character. Polymer synthesis from these materials and the catalyst provided various value-added functional polymers, demonstrating good examples of green polymer chemistry.

     

Design and control of morphology for high performance polymer alloys

Ductile polymers are significantly toughened by the addition of an elastomeric phase. The rubber phase acts as a stress concentrator, cavitates during the loading process and initiates localized plastic deformation in matrix. This paper deals with the simulation of the deformation behavior of rubber toughened polycarbonate and the fracture process of the embedded rubber particle. A two-dimensional one particle- and two-particle model with varying surface-to-surface interparticle distances are established. The calculation showed that the polymer matrix has plastically deformed before cavitation for the one-particle model whereas cavitation occurs in the elastic state of the matrix for the two-particle model. Cavitation itself is proved to be a change from the particle-system towards a void-system for both cases. The toughness of the post-cavitated void-system is shown to be dependent on the surface-to-surface interparticle distance and the strain-hardening characteristic of the matrix polymer.