Clickable polyglycerol hyperbranched polymers and their application to gold nanoparticles and acid-labile nanocarriers

A one-step, large-scale preparation of alkyne-containing hyper-branched polyglycerols (HPG) is reported. The HPGs undergo click reactions to organic azides allowing a range of applications.     

Efficient conversion of aromatic amines into azides: a one-pot synthesis of triazole linkages

[reaction: see text] An efficient and improved procedure for the preparation of aromatic azides and their application in the Cu(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition ("click reaction") is described. The synthesis of aromatic azides from the corresponding amines is accomplished under mild conditions with tert-butyl nitrite and azidotrimethylsilane. 1,4-Disubstituted 1,2,3-triazoles were obtained in excellent yields from a variety of aromatic amines without the need for isolation of the azide intermediates.     

Copper nanoparticles in click chemistry: an alternative catalytic system for the cycloaddition of terminal alkynes and azides

Readily prepared copper nanoparticles have been found to effectively catalyse the 1,3-dipolar cycloaddition of a variety of azides and alkynes furnishing the corresponding 1,2,3-triazoles in excellent yields. Both the preparation of the nanoparticles and the click reaction proceed in short reaction times.     

One‐pot synthesis of precise polyisoxazoles by click polymerization: Copper (I)‐catalyzed 1,3‐dipolar cycloaddition of nitrile oxides with alkynes

This article reports a new one‐pot method for polymer preparation, which involves double click chemistry. In one pot, two click reactions take place sequentially by adding the reactants step by step. The first click reaction is to produce the monomer for the second click reaction for polymerization. The click polymerization differs from the general click polymerization with the reaction of diazides and dialkynes. Nitrile oxides, produced in situ by the first click reaction of the formation of aldoxime, instead azides, avoiding the poisonousness and explosiveness of azides and being much safer and easy to operate. And 3,5‐disubstitute polyisoxazoles are produced by the copper(I)‐catalyzed the 1,3‐dipolar cycloaddition of nitrile oxides with alkynes in high yields by our one‐pot method. The resulting polyisoxazoles agree well with the structural assignment obtained by the ¹H NMR and IR analyses, with high molecular weights, narrow molecular weight distribution (M_w/M_n < 1.2) and high regioregularity. The poor solubility of these polymers is found to be caused by their crystallization. Improvement of solubility is achieved by modifying the structures of alkyne monomers. All the polymers are thermally stable, losing little of their weights when heated to ～350 °C. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Fast, ligand- and solvent-free copper-catalyzed click reactions in a ball mill

A new, ligand- and solvent-free method for the Huisgen 1,3-dipolar cycloaddition (click reaction) was developed using a planetary ball mill. Besides various alkynes and azides, a propargyl functionalized polymer was converted by mill clicking. Moreover, it was possible to carry out a click polymerization in a ball mill.     

A highly active and reusable copper(I)-tren catalyst for the "click" 1,3-dipolar cycloaddition of azides and alkynes

The copper(I) complex [Cu(C18(6)tren)]Br 1 (C18(6)tren = tris(2-dioctadecylaminoethyl)amine) which exhibits a good stability towards aerobic conditions is a versatile, highly reactive and recyclable catalyst for the Huisgen cycloaddition of azides with terminal or internal alkynes and is a useful catalyst for the preparation of "click" dendrimers.     

Novel approach to the design of potential bioactive alkaloid anabasine conjugates using click chemistry methodology

Anabasine‐containing azides and acetylenes were used as building blocks in copper(I)‐catalyzed 1,3‐dipolar cycloaddition reactions with a series of acetylenes and azides via click methodology to provide a range of anabasine conjugates being potential ligands for neuronal nicotinic acetylcholine receptors.     

ZrCl4-Catalyzed C-O Bond to C-N Bond Formation: Synthesis of 1,2,3-Triazoles and Their Biological Evaluation

A simple and efficient protocol was developed for the synthesis of aryl azides directly from aryl carbinols using ZrCl₄ as a Lewis acid catalyst. The azides were converted to novel triazoles under click reaction conditions, which were evaluated for their antimicrobial activity against various strains.     

Second-generation difluorinated cyclooctynes for copper-free click chemistry

The 1,3-dipolar cycloaddition of azides and activated alkynes has been used for site-selective labeling of biomolecules in vitro and in vivo. While copper catalysis has been widely employed to activate terminal alkynes for [3 + 2] cycloaddition, this method, often termed "click chemistry", is currently incompatible with living systems because of the toxicity of the metal. We recently reported a difluorinated cyclooctyne (DIFO) reagent that rapidly reacts with azides in living cells without the need for copper catalysis. Here we report a novel class of DIFO reagents for copper-free click chemistry that are considerably more synthetically tractable. The new analogues maintained the same elevated rates of [3 + 2] cycloaddition as the parent compound and were used for imaging glycans on live cells. These second-generation DIFO reagents should expand the use of copper-free click chemistry in the hands of biologists.     

Facile strategy for preparation of alkyne-functionalized cellulose fibers with click reactivity

A facile strategy for preparation of alkyne-functionalized cellulose fibers with click reactivity is reported herein. Poly(3-ethynylaniline) [poly(3-EA)] with pendant alkynyl groups was obtained by chemical oxidation polymerization of 3-ethynylaniline with ammonium persulfate in low-concentration hydrochloric acid solution at ice-bath temperature and used to generate alkyne-functionalized cellulose fibers in situ from pulp fibres. Successful preparation of alkyne-functionalized cellulose fibers was confirmed by attenuated total reflectance Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. The effects of process variables on poly(3-EA) deposition and fiber loss were investigated, and suitable preparation conditions identified. Deposition of poly(3-EA) did not change the crystallinity or hydrophilicity of the cellulose fibers. Poly(3-EA) and alkyne-functionalized cellulose fibers reacted with azides by Cu(I)-catalyzed alkyne–azide 1,3-dipolar cycloaddition. Thus, this in situ chemical polymerization technology provides a new platform for click functionalization of cellulose fibers. Applications of cellulose fibers produced in this way are limited to those without demanding requirements in terms of product strength or color.     

Introduction of click chemistry to carotenoids

We describe the synthesis of carotenoid derivatives via the azide–alkyne click reaction and optimize the conditions for these sensitive molecules. After finding the mildest conditions possible for the reaction we were able to use the click reaction for the synthesis of PEG–carotenoid conjugates starting from carotenoid pentynoates and PEG azides.     

Click Chemistry Route to the Synthesis of Unusual Amino Acids,Peptides, Triazole‐Fused Heterocycles and Pseudodisaccharides

Conjugation of different molecular species using copper(I)‐catalyzed click reaction between azides and terminal alkynes is among the best available methods to prepare multifunctional compounds. The effectiveness of this method has provided wider acceptance to the concept of click chemistry, which is now widely employed to synthesize densely functionalized organic molecules. This article summarizes the contributions from our group in the development of new methods for the synthesis of functional molecules using copper(I)‐catalyzed click reactions. We have developed very efficient methods for the synthesis of peptides and amino acids conjugated with carbohydrates, thymidine and ferrocene. We have also developed an efficient strategy to synthesize triazole‐fused heterocycles from primary amines, amino alochols and diols. Finally, an interesting method for the synthesis of pseudodisaccharides linked through triazoles, starting from carbohydrate‐derived donor‐acceptor cyclopropanes is discussed.     

Polymerization of an optically active phenylacetylene derivative bearing an azide residue by click reaction and reaction with a rhodium catalyst

A facile method for synthesizing diverse optically active polymers with different backbone structures was developed by the polymerization of an optically active aromatic azide bearing an acetylene unit with a rhodium catalyst followed by the click reaction of the pendant azides or by the click polymerization of the monomer.     

Facile derivatization of azide ions using click chemistry for their sensitive detection with LC-MS

By employing a click reaction, a novel method was developed for the sensitive detection of inorganic azides at as low as 21 ppb.     

Klick‐Chemie. Synthesen,die gelingen

Click‐Chemistry is a concept in organic synthesis that uses a limited amount of very reliable reactions on a broad variety of substrates. This leads within a few steps to molecules of high diversity which is important to accelerate drug‐discovery. Besides favourable thermodynamic requirements, the criteria for a click‐reaction include also simple reaction conditions and a quick and easy (almost unnecessary) workup. The most successful of these click‐reactions is the copper catalysed 1, 3‐dipolar cycloaddition of azides and alkynes, which in the meantime is used in most diverse areas of chemistry. The mechanistic ideas of this reaction is looked at in more detail.     

Azide-alkyne click polymerization: An update

The great achievements of click chemistry have encouraged polymer scientists to use this reaction in their field.This review assembles an update of the advances of using azide-alkyne click polymerizati...     

Cu(I)-catalyzed intramolecular cyclization of alkynoic acids in aqueous media: a "click side reaction"

Alkynoic acids, in particular, 4-pentynoic acid derivatives, undergo intramolecular cyclizations to enol lactones under reaction conditions typically applied for the Cu(I)-catalyzed cycloaddition of terminal alkynes and azides (click chemistry). Starting from appropriate alkynoic acid derivatives, either enol lactones or 1,2,3-triazole click products can be obtained selectively by Cu(I) catalysis in aqueous media.     

A Mild, Large-Scale Synthesis of 1,3-Cyclooctanedione: Expanding Access to Difluorinated Cyclooctyne for Copper-Free Click Chemistry

We report the large-scale synthesis of 1,3-cyclooctanedione in five steps with 29% yield. This molecule is a synthetic precursor to difluorinated cyclooctyne, which participates in a bioorthogonal copper-free click reaction with azides. The final step demonstrates the first successful application of the Wacker-Tsuji oxidation to form a cyclic 1,3-dione.     

Efficient preparation and properties of triazole-linked corannulene derivatives

In this study, we explore the potential of copper(I)-catalyzed cycloaddition reaction between azides and terminal alkynes to prepare corannulene-rich materials. For this purpose, a practical route is established to yield corannulene-based azide building blocks. The newly prepared corannulene-azides are then coupled with known corannulene-alkynes. The chemical yields of the dimerization reactions ranged from 80 to 90%. In this way, a number of triazole-linked corannulene derivatives varying in the geometry, length, and the triazole-content are prepared. These results suggest that alkyne–azide click reaction can serve as a useful synthetic tool in the preparation of corannulene-rich discrete oligomers as well as polymers.     

Palladium(II) complexes of readily functionalized bidentate 2-pyridyl-1,2,3-triazole "click" ligands: a synthetic, structural, spectroscopic, and computational study

The Cu(I)-catalyzed 1,3-cycloaddition of organic azides with terminal alkynes, the CuAAC "click" reaction is currently receiving considerable attention as a mild, modular method for the generation of functionalized ligand scaffolds. Herein we show that mild one-pot "click" methods can be used to readily and rapidly synthesize a family of functionalized bidentate 2-pyridyl-1,2,3-triazole ligands, containing electrochemically, photochemically, and biologically active functional groups in good to excellent yields (47-94%). The new ligands have been fully characterized by elemental analysis, HR-ESI-MS, IR, (1)H and (13)C NMR and in three cases by X-ray crystallography. Furthermore we have demonstrated that this family of functionalized "click" ligands readily form bis-bidentate Pd(II) complexes. Solution studies, X-ray crystallography, and density functional theory (DFT) calculations indicate that the Pd(II) complexes formed with the 2-(1-R-1H-1,2,3-triazol-4-yl)pyridine series of ligands are more stable than those formed with the [4-R-1H-1,2,3-triazol-1-yl)methyl]pyridine "click" ligands.