Palladium catalyzed N-alkylation of amines with alcohols

An iron oxide immobilized palladium catalyst was prepared for the N-alkylation of amines with alcohols under base and organic ligand free conditions. Applying the optimized reaction conditions, the coupling reactions of amines and alcohols with various structures could be realized with up to 99% isolated yields. The catalysts were studied by XRD, BET, and XPS and the mechanism was studied by DFT calculations.     

CpIr-catalyzed N-alkylation of amines with alcohols. A versatile and atom economical method for the synthesis of amines

A versatile and highly atom economical catalytic system consisting of [Cp^∗IrCl₂]₂/NaHCO₃ (Cp^∗=pentamethylcyclopentadienyl) for the N-alkylation of amines with primary and secondary alcohols as alkylating reagents has been developed. For example, the reaction of equimolar amounts of aniline and benzyl alcohol in the presence of [Cp^∗IrCl₂]₂ (1.0 mol % Ir) and NaHCO₃ (1.0 mol %) in toluene at 110 °C gives N-benzylaniline in 94% yield. The present catalytic system is applicable to the N-alkylation of both primary and secondary amines, and only harmless water is produced as co-product. A wide variety of secondary and tertiary amines can be synthesized with high atom economy under mild and less-toxic conditions. One-pot sequential N-alkylation leading to tertiary amines bearing three different substituents is also described.     

Lewis acid promoted alkynylation of imines with terminal alkynes: simple, mild and efficient preparation of propargylic amines

A mild and efficient addition of terminal alkynes to imines in the presence of ZnCl₂, Et₃N and TMSCl gives propargylamines in good yields.     

Facile N-formylation of amines using Lewis acids as novel catalysts

Alky, aryl, and heteroaryl amines were found to react efficiently with formic acid under Lewis acid catalysis giving N-formyl derivatives in high yields. A study of ZnCl₂-catalyzed N-formylation of a variety of amines using formic acid as formylating agent is described.     

Ruthenium-catalyzed direct amination of alcohols with tertiary amines

A highly selective phosphine-based ruthenium catalyst system efficiently catalyzes the direct amination of alcohols with aliphatic tertiary amines, yielding unsymmetric tertiary amines in yields up to 87%. Ligand and solvent both affect the reaction yields significantly. The reaction can be performed with a wide variety of functionalities.     

2-(Sulfooxy)propane-1,2,3-tricarboxylic acid as novel and versatile catalyst for the formylation of alcohols and amines using ethyl formate under neat conditions

2-(Sulfooxy)propane-1,2,3-tricarboxylic acid(supported on silica gel) has been introduced as novel and green catalyst for the formylation of alcohols and amines with ethyl formate,as mild formylation agent,under neat conditions at room temperature.     

Polymer-supported gadolinium triflate as a convenient and efficient Lewis acid catalyst for acetylation of alcohols and phenols

A polymer-supported gadolinium triflate (CMPS-IM-Gd) catalyst was prepared from chloromethyl polystyrene (CMPS) resin using a simple and convenient procedure. This polymeric catalyst was used as an efficient Lewis acid catalyst for the acetylation of various alcohols and phenols with acetic anhydride, affording high yields under mild conditions. The reaction was completed in a short period of time with small amounts of the catalyst. The catalyst was reused over 10 times without any significant loss of its catalytic activity.     

A green protocol for the N-formylation of amines using molybdate sulfuric acid as a reusable solid catalyst

A novel and efficient method for the N-formylation of amines via the reaction of orthoformates and amines is developed. The reactions are mediated by a catalytic amount of molybdate sulfuric acid as a heterogeneous solid acid.     

Catalytic oxidative conversion of alcohols, aldehydes and amines into nitriles using KI/I2-TBHP system

The oxidative conversion of alcohols, aldehydes and amines to give corresponding nitriles in excellent yields was easily achieved by the catalytic amount of KI or I₂ in combination with TBHP as an external oxidant. This non-transition metal catalyst is cost effective and provides easy work-up and separation of the product.     

温和条件下钒催化氧化胺、醇和胺直接合成亚胺(英文)

开发了钒催化氧化胺、醇和胺直接合成亚胺催化体系,无须额外的添加剂或促进剂,空气作为环境友好的氧源,温和条件下,能高收率地得到各种对称和非对称亚胺,并且催化剂非常容易制备和使用.该催化体系对含杂原子亚胺的合成也非常有效.     

Selective mono- and di-N-alkylation of aromatic amines with alcohols and acylation of aromatic amines using Ph3P/DDQ

Selective N-monoalkylation of aromatic amines with 1° and 2° alcohols and conversion of aromatic amines to amides are performed immediately and in excellent yields using triphenylphosphine (PPh₃) and 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) in dichloromethane at room temperature. Symmetrical and unsymmetrical N,N-dialkylation of aromatic amines are also carried out in modest yield at room temperature by this reagent system.     

Assessment of fluoroalkyltin compounds as fluorous Lewis acid catalysts

The synthesis of a variety of organotin compounds with 1H, 1H, 2H, 2H‐perfluorooctyl groups is reported, together with an improved method for the corresponding distannoxane. Unique properties of this compound are disclosed in terms of fluorophilicity and activity as a Lewis acid catalyst in comparison with other mono‐nuclear derivatives. A new criterion for obtaining high solubility in fluorocarbon solvents is presented. Copyright © 2003 John Wiley & Sons, Ltd.     

Cyclometalated palladium pre-catalyst for N-alkylation of amines using alcohols and regioselective alkylation of sulfanilamide using aryl alcohols

Simple pyrazole based palladacycle-phosphine with a high turnover has been developed and applied for the N-alkylation of amines and sulfanilamide using alcohols as substrates by hydrogen borrowing strategy. N-alkylation of primary and secondary amines resulted in high isolated yields at 100–130 °C, under solvent free conditions. More challenging secondary aliphatic as well as aromatic alcohols were also successfully utilized as alkylating agents under similar reaction conditions. The turn over number reached up to 43000 for N-benzylation of aniline using benzyl alcohol. Notably, regioselective N-alkylation of 2-aminobenzothiazole and 4-aminobenzenesulfonamide to the corresponding 2-N-(alkylamino)azoles and 4-amino-(N-alkyl)benzenesulfonamides using alcohols as alkylating agents have been achieved using our new pre-catalyst-phosphine system.     

Stereocontrol during the radical polymerization of methyl methacrylates with combined Lewis acids:Aluminium trichloride(AlCl_3) and iron dichloride tetrahydrate

The radical polymerization of methyl methacrylate(MMA) was carried out in the presence of combined Lewis acids of the AlCl3-FeCl2 system.Compared with the polymerization produced in the presence of single Lewis acids,AlCl3 or FeCl2,the MMA polymerization in the presence of AlCl3-FeCl2 composite in CHCl3 or 1-butanol produced a polymer with a higher isotacticity and in toluene produced a polymer with a much higher isotacticity(mm=50%) .The molecular weight and polydispersity of PMMA in the presence of Lewis ...     

Conjugate addition of aromatic amines to ethenetricarboxylates

The conjugate addition of amines is considered to be a useful reaction in synthetic organic chemistry. The reaction of reactive electrophilic olefins, ethenetricarboxylates, and aromatic amines with and without catalytic Lewis acids such as ZnCl₂ and ZnBr₂ at room temperature gave amine adducts in high yields. The products were converted to α-amino acid, dl-aspartic acid derivatives. Using Lewis acids such as Sc(OTf)₃ and Zn(OTf)₂ at higher temperature (40-80 °C), the reaction of ethenetricarboxylates and N-methylaniline gave an aromatic substitution product. A catalytic enantioselective conjugate addition using a chiral Lewis acid was also investigated. For example, the reaction of 1,1-diethyl 2-tert-butyl ethenetricarboxylate with N-methylaniline in the presence of chiral bisoxazoline-Cu(II) complex in THF at −20 °C for 17 h gave an amine adduct in 91% yield and 78% ee. On the other hand, the reaction with aniline and primary aniline derivatives gave adducts with almost no ee%.     

Fe(II)-catalyzed N-alkylation of sulfonamides with benzylic alcohols

The FeCl₂/K₂CO₃ catalyst system was developed successfully for the N-alkylation of sulfonamides with benzylic alcohols via borrowing hydrogen method. XPS analysis suggested a possible catalyst cycle between Fe(II) and Fe(0). Under the optimized condition, the scope of the protocol was demonstrated in 21 different alkylation reactions. High yields, in general >90%, are achieved in most cases.     

Direct oxidative conversion of alcohols and amines to nitriles with molecular iodine and DIH in aq NH3

Simple and high-yield procedures for the direct oxidative conversion of various primary alcohols, and primary, secondary, and tertiary amines to the corresponding nitriles were successfully carried out with molecular iodine in aq ammonia and 1,3-diiodo-5,5-dimethylhydantoin in aq NH₃, respectively.