ClONO2与Cl(2P3/2)的反应机理

在密度泛函理论B3LYP/6-31G^*水平上,研究了ClONO₂+Cl(²P_3/2)Cl₂+NO₃和ClONO₂+Cl(²P_3/2)ClO+ClONO(cis)及ClONO₂+Cl(²P_3/2)ClOCl+NO₂的反应机理.计算得到各可能反应途径的过渡态,并经过内禀反应坐标(IRC)分析加以证实.反应ClONO₂+Cl(²P_3/2)Cl₂+NO₃反应活化能垒最低,为4.5kJ/mol,是反应主通道.     

Silyl-substituted 1,3-butadienes for Diels-Alder reaction, ene reaction and allylation reaction

Silyl-substituted 1,3-butadienes are useful building blocks and are readily applied in several types of reactions such as Diels-Alder reaction, ene reaction and allylation. They can also participate in different tandem reactions such as Diels-Alder/allylation, ene/allylation, ene/allylation/Diels-Alder reaction, ene/allylation/ene reaction and ene/allylation/Diels-Alder/allylation reaction. This feature article reviews the synthesis of silyl-substituted 1,3-butadienes, and their applications in the reaction types mentioned above, involving a tandem Diels-Alder/ene/allylation process. This article also introduces some reactions of alkenylsilanes and allylsilanes for comparison and discussion about the tandem reaction. The tandem reactions described in this article are a powerful tool to construct complicated multicyclic compounds with high selectivity and high efficiency.     

二级反应速率常数与活化能计算问题的讨论

In this paper, we discussed several problems on calculation of reaction rate constant in physical chemistry reference books. When calculating the rate constant k of the second-order reaction, we should make the half-life formula consistent with the reaction stoichiometric equation. And when calculating the activation energy with Arrhenius formula for ideal gas-phase reaction, attention should be paid to identifying the difference between the reaction rate constant k_c and k_p, as well as the difference between corresponding activation energy E_ac and E_ap. It is beneficial for students to have a correct understanding in calculation.     

气体再燃低NOx燃烧中NO与NHi的反应机理研究

采用量子化学密度泛函理论(DFT)对NO与NH_i自由基的反应机理进行了研究,并结合经典过渡态理论对各反应速率常数进行了计算。结果表明,NO与NH₂自由基的反应体系可通过六个反应通道形成N₂+H₂O、N₂O+H₂和N₂H+OH。从能量变化和反应速率两方面考虑,产物N₂+H₂O最容易生成,其最佳反应通道为NO+NH₂→→N₂+H₂O;NO与NH自由基的反应体系可通过七个反应通道形成N₂+OH、N₂O+H和N₂H+O;其中,N₂+OH最容易生成,最佳反应通道为NO+NH→→N₂+OH。比较发现, NH比NH₂自由基更易与NO发生反应生成N₂。因此,在实际运行中改变操作条件,实现NH₂等向NH方向转化,有利于NO_x的还原。     

煤燃烧过程中砷与氮氧化物的反应机理

应用量子化学密度泛函理论B3LYP方法,研究了砷与氮氧化物(N_2O、NO_2和NO)的反应机理。全参数优化了各反应物、中间体、过渡态和产物的几何构型,通过频率分析证实中间体和过渡态的真实性,并通过内禀反应坐标(IRC)计算以进一步确定过渡态。为了得到更精确的能量信息,在B2PLYP水平下计算各结构的单点能,并通过动力学参数深入分析其反应机理。结果表明,砷与三种氮氧化物(N_2O、NO_2和NO)的反应能垒分别为78.45、2.58、155.85 k J/mol。在298-1800 K,各反应速率随温度的升高而增大。由于砷与NO_2的反应能垒较低,其反应速率大于1012cm3/(mol·s),说明该反应容易发生且速率极快。砷与N_2O和NO的反应,在298-900 K,反应速率随温度的升高明显增加;当温度进一步升高,其增加的趋势有所减缓。     

Tunnel effects on inter- and intramolecular hydrogen transfer reactions of transient dihydro- and hexahydrocarbazoles

We examine inter- and intramolecular hydrogen-transfer processes in two related metastable dihydrocarbazoles in nonpolar solvents of different viscosity and compare them with similar transfer processes in transient hexahydrocarbazoles. N-ethyldiphenylamine (A′) and N-ethyl-2,6-dimethyldiphenylamine (A) photocyclize in their triplet states, yielding the triplet states of the zwitterionic dihydrocarbazoles ³Z′* and ³Z*, respectively, which subsequently relax to their metastable singlet ground states ¹Z′ and ¹Z′. In spite of their similarity, the two transients ¹Z′ and ¹Z stabilize by completely different pathways: the unsubstituted transient ¹Z′ is converted into N-ethylcarbazole (C) and an N-ethyltetrahydrocarbazole (THC) by a bimolecular disproportionation reaction. The methylsubstituted intermediate ¹Z is converted into a stable dihydrocarbazole (D) by a sigmatropic, intramolecular [1,8]-H-shift and by an intermolecular, mutual hydrogen-exchange reaction within the encounter complex ¹(ZZ) which yields two molecules of D. The rates of the intra- and of the intermolecular transfer reaction of ¹Z are governed by tunnel effects. The rate of the intramolecular tunnel process does not depend on solvent friction and becomes temperature independent at low temperatures. The rate of the intermolecular, reaction-controlled exchange reaction ¹(ZZ) → 2 ¹D becomes also temperature independent if the solvent is fluid enough. In more viscous solvents the reaction becomes diffusion controlled and, therefore, strongly temperature dependent. The intermolecular disproportionation reaction 2 ¹Z′ → C + THC is also reaction controlled but no tunnel effects are observed.     

菠萝蛋白酶催化大豆蛋白水解反应的热动力学

利用热活性检测仪测定了菠萝蛋白酶催化大豆蛋白水解反应的热功率-时间曲线,按照热动力学理论和对比进度法解析出不同温度、酸度时菠萝蛋白酶催化大豆蛋白水解反应的米凯利斯常数（K_m）和最大速率（V_max）,并建立了K_m与温度和酸度的关系式,从而获得酶催化反应的最适温度（314.63 K）和最适pH（6.99）. 在最适温度和最适pH条件下,测定了金属离子可逆竞争时菠萝蛋白酶催化大豆蛋白水解反应的热功率-时间曲线,对曲线进行处理,得到了酶催化反应的米凯利斯常数（K_m’）和最大速率（V_max’）. 建立了K_m’与金属离子浓度间的关系式,比较了金属离子对酶催化反应的激活或抑制效果.     

Theoretical studies of metallo (Li and Na)-ene reaction mechanisms

The reaction mechanisms of allyl-lithium and allyl-sodium with ethylene were studied by ab initio molecular orbital (MO) methods. The reaction mechanisms were analyzed by a CiLC-IRC method on the basis of ab initio CASSCF MOs. The ene reaction pathways of allyl-Li and allyl-Na with ethylene were located. The complex between allyl-metal and ethylene for both systems is found in the first step of the reaction, and then the metal migration and new C-C bond formation occur synchronously through the transition state. The complexation energies are -13.2 and -9.6 kcal/mol for Li and Na systems, respectively. The activation energy barriers from the reactants are 3.5 kcal/mol for the Li system and 2.0 kcal/mol for the Na system at the MRMP2 calculation level. These barriers are significantly lower than that of the ene reaction of propene with ethylene as the parent reaction. The CiLC-IRC analysis shows that the reaction of allyl-metal with ethylene is a concerted ene reaction mechanism, not a metal catalysis and/or a stepwise reaction.     

馏分油浆态床加氢处理研究: II FCC柴油加氢工艺条件及动力学研究

对FCC柴油在浆态床柴油加氢催化剂SP25上的加氢工艺条件进行了优化,并考察了加氢脱硫（HDS）和加氢脱氮（HDN）动力学。结果表明,提高反应温度、提高反应压力、增加催化剂的加入量、延长反应时间都能提高催化剂的加氢精制活性,最佳的FCC柴油浆态床加氢工艺条件为,温度350℃、压力6MPa、催化剂加入量6%、反应时间2h。催化剂循环使用性能的考察结果表明,SP25催化剂具有良好的活性稳定性。动力学研究结果表明,FCC柴油的加氢脱硫反应过程可以分为两个阶段。第一阶段为较易脱除的苯并噻吩类（BTs）硫化物的加氢脱硫反应,反应活化能为70.00kJ/mol;第二阶段为较难脱除的二苯并噻吩类（DBTs）硫化物的加氢脱硫反应,反应活化能为85.65kJ/mol。FCC柴油HDN反应的活化能为79.91kJ/mol。烷基取代的二苯并噻吩类硫化物（特别是DMDBTs）是加氢精制反应中最难脱除的含杂原子（S或N）烃类化合物。     

碳纳米管的聚合物功能化与结构控制:聚合物接枝碳纳米管

碳纳米管高分子化是发展高性能的聚合物基纳米功能材料的重要研究方向,本文从"grafting-to"和"grafting-from"两种方式对聚合物接枝碳纳米管的最新进展进行了系统综述。"Grafting-to"方法主要包括羧基衍生反应(酰化、酯化)、加成反应(大分子自由基加成、叠氮环加成)和硫醇偶联反应。"Grafting-from"方法包括普通自由基聚合、可控/活性自由基聚合、离子聚合、开环聚合和逐步聚合反应,其中碳纳米管表面引发活性自由基聚合进一步分为原子转移自由基聚合、氮氧稳定自由基聚合和可逆加成-断链转移聚合。此外,本文还简述了碳纳米管自身的聚合反应,并探讨了目前聚合物修饰碳纳米管所面临的问题和今后的发展方向。     

物理化学中关于n级反应及其半衰期的讨论

相对于积分法和微分法,由半衰期法确定反应级数的方法具有更高的可靠性和普适性。但教科书上由n级反应推导半衰期的过程却较为模糊。本文通过四种不同的方法详细探讨了n级反应及其半衰期的推导过程,有利于学生加深对n级反应及其半衰期推导过程的认识。     

金属离子和磺化酞菁反应动力学研究

本文首次采用分光光度法研究金属离子和磺化酞菁反应动力学,给出精确求解方法。并用这一方法研究了Cu(Ⅱ)与三磺化酞菁(L)的反应动力学,提出了可能的反应机理。 1 计算原理 在磺化酞菁L与金属离子M的反应体系中,可能存在下列反应:2LL_2,L_2+MML+L,L+M ML,L_2+2M(ML)_2,2ML(ML)_2。选择适当的反应条件,使得金属离子在测定波长下无吸收;磺化酞菁金属配合物的二聚可忽略。若某一时刻体系在一特     

苯基脲与甲醇合成苯氨基甲酸甲酯的研究

采用苯基脲与甲醇反应合成了苯氨基甲酸甲酯,考察了不同催化剂、原料配比及反应工艺条件的影响,确定了适宜的合成条件,并根据产物分布对催化反应机理进行了初步探讨.结果表明,以PbO为催化剂,于140℃反应4h后,苯基脲转化率为95.2%,苯氨基甲酸甲酯收率为80.6%.     

Polycondensation of benzyl chloride over Ga- and In-modified ZSM-5 type zeolites and Si-MCM-41 or Montmorillonite-K10 supported GaCl3 and InCl3 catalysts

Performance of In- and Ga-modified ZSM-5 type zeolites (namely, In₂O₃/H-ZSM-5, Ga₂O₃/H-ZSM-5, H-GaMFI and H-GaAlMFI) and InCl₃ or GaCl₃ supported on high silica mesoporous MCM-41 or on Mont.-K10 in the liquid phase polycondensation of benzyl chloride to polybenzyl has been investigated. Influence of solvent (namely, dichloroethane, n-heptane and ethanol) and temperature on the rate of polycondensation of benzyl chloride over the catalyst (InCl₃/Si-MCM-41) showing highest polycondensation activity has also been studied. The In- and Ga-containing solid catalysts show good or high activity in the polycondensation reaction at the reaction condition normally employed in the benzylation of aromatic compounds by benzyl chloride. However, the polycondensation is strongly influenced by the solubility of the polybenzyl polymer in the reaction medium and consequently by the solvent used as the reaction medium.     

Bronsted acidic ionic liquid [C3SO3HDoim]HSO4 catalyzed one-pot three-component Biginelli-type reaction: An efficient and solvent-free synthesis of pyrimidinone derivatives and its mechanistic study

A series of Bronsted acidic ionic liquids(ILs) were prepared and used for Biginelli-type condensation reaction among aromatic aldehydes, urea or thiourea and cyclopentanone. Through this reaction, the synthesis of various pyrimidinones could be achieved. Of interest, it was found that the reaction was efficiently catalyzed by a novel, eco-friendly functionalized IL [C_3SO_3HDoim]HSO_4, which could be reused for at least 7 times without significantly loss of catalytic activity. The reaction proceeded efficiently at 80℃ to afford the desired products in good yield(up to 96%). In addition, a possible mechanism that accounted for the IL [C_3SO_3HDoim]HSO_4-catalyzed reaction was proposed.     

Ab initio study on the mechanism of forming a silapolycyclic compound between silylidene and formaldehyde

The mechanism of the cycloaddition reaction of forming a silapolycyclic compound between singlet silylidene and formaldehyde has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD(T)//MP2/6-31G* method. From the potential energy profile, it can be predicted that the cycloaddition reaction process of forming the silapolycyclic compound (P₂) for this reaction consists of four steps: (I) the two reactants first form a semi-cyclic intermediate INT1a through a barrier-free exothermic reaction of 32.5 kJ mol⁻¹; (II) this intermediate then isomerizes to an active four-membered ring intermediate INT1 via a transition state TS1a with an energy barrier of 30.8 kJ mol⁻¹; (III) INT1 further reacts with formaldehyde to form an intermediate INT2, which is also a barrier-free exothermic reaction of 30.1 kJ mol⁻¹; (IV) INT2 isomerizes to a silapolycyclic compound P₂ via a transition state TS2 with a barrier of 50.6 kJ mol⁻¹. Comparing this reaction path with other competitive reaction paths, we can see that this cycloaddition reaction has an excellent selectivity.     

Synthesis and properties of polyether ketones

Polyether ketones were prepared by the nucleophilic reaction of dihaloaromatic ketones with aromatic bisphenols (hydroquinone, resorcinol and 4,4-dihydroxybenzophenone) using various solvents in the presence of anhydrous K₂CO₃. Dihaloaromatic ketones (4,4-difluorobenzophenone/4,4-dichlorobenzophenone) were prepared from the reaction of fluorobenzene/chlorobenzene with carbon tetrachloride in the form of AlCl₃. The polymers were characterized by different physico-chemical techniques. Thermogravimetric studies showed that all the polymers were stable upto 500°C with a char yield above 50% at 900°C in N₂ atmosphere. Isothermal degradation at 400°C under air and N₂ atmosphere reveals about 5% weight loss and about 1% weight loss at 75 min respectively. The effect of solvents, reaction temperature and reaction time on molecular weights are discussed. The effect of the annealing time on crystallinity of the polymers is also discussed.     

Theoretical analysis of concerted and stepwise mechanisms of the hetero-Diels–Alder reaction of butadiene with formaldehyde and thioformaldehyde

The concerted and stepwise mechanisms of the hetero-Diels–Alder reaction of butadiene with formaldehyde and thioformaldehyde were studied by a CASSCF molecular orbital method. The energy barrier of the concerted reaction of butadiene with formaldehyde is about 21 kcal/mol higher than that of butadiene with thioformaldehyde at the CAS-MP2 calculation level. For the stepwise reaction paths, the energy barrier for the first step process of the reaction of butadiene with formaldehyde is about 17 kcal/mol above that of butadiene with thioformaldehyde. The concerted pathways for both systems are more favorable by 9–12 kcal/mol than the stepwise pathways. The electronic mechanisms for the concerted reactions of both reaction systems are also discussed by a CiLC analysis.     

双自由基CF2与O3的反应机理

主要用作致冷剂和发泡剂的氯氟烃（CFCs）是破坏臭氧层的主要物质之一．对氯氟烃类化合物及其降解产物（包括光解、光氧化、化学反应产物等）在大气中行为问题的研究是大气化学研究的重要内容．前人[1-3]从理论和实验两方面研究了自由基与臭氧的反应机制，但是氯氟烃光解过程中     

Theoretical studies of mechanism of cycloaddition reaction between germylidene and formaldehyde

Mechanism of the cycloadditional reaction between singlet germylidene (R1) and formaldehyde (R2) has been investigated with MP2/6‐31G* method, including geometry optimization, and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD(T)//MP2/6‐31G* method. From the potential energy profile, it can be predicted that the dominant reaction pathway of the cycloadditional reaction between singlet germylidene and formaldehyde is reaction (4) , which consists of three steps: the two reactants (R1, R2) first form an intermediate INT1b through a barrier‐free exothermic reaction of 28.1 kJ/mol; this intermediate reacts further with formaldehyde (R2) to give an intermediate INT4, which is also a barrier‐free exothermic reaction of 37.2 kJ/mol; subsequently, the intermediate INT4 isomerizes to a heteropolycyclic germanic compound P4 via a transition state TS4, for which the barrier is 18.6 kJ/mol. The dominant reaction has an excellent selectivity and differs considerably from its competitive reactions in thermodynamic property and reaction rate. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008