Iodide-selective polymeric membrane electrode based on copper(Ⅱ) bis(N-2-bromophenylsalicyldenaminato) complex

A PVC membrane electrode based on copper（Ⅱ） bis（N-2-bromophenylsalicyldenaminato） as ionophor was prepared.The ion selective electrode was tested by inorganic anions and showed a good selectivity for iodide ion.This sensor exhibited Nernstian behavior with a slope of—57.8 mV per decade at 25℃.The proposed electrode showed a linear range from 1.0×10⁵ to 1.0×10^-1 mol/L with a detection limit of 5.0×10^-6 mol/L.The electrode response was independent of pH in the range of 3.0- 10.0.The proposed sensor was applied to determine the iodide in water and antiseptic samples.     

Coated-wire copper(II)-selective electrode based on phenylglyoxal-α-monoxime ionophore

A copper(II) ion-selective electrode based on a recently synthesized 2-quinolyl-2-phenylglyoxal-2-oxime (phenylglyoxal-alpha-monoxime) has been developed. The PVC-based membrane containing phenylglyoxal-alpha-monoxime, dibutyl phthalate as plasticizer, and sodium tetraphenylborate as anion excluder and membrane modifier, was directly coated on the surface of a platinum-wire electrode. The response of the electrode was linear with a near-Nernstian slope of 28.2 mV decade(-1) within the Cu2+ ion concentration range 1x10(-6)-1x10(-1) mol x L(-1). The response time for the proposed electrode to achieve a 95% steady potential for Cu2+ concentrations ranging from 1x10(-1) to 1x10(-6) mol x L(-1) is between 10 and 50 s, and the electrode is suitable for use within the pH range of 3 to 6.5. The electrode has a detection limit of 5x10(-7) mol x L(-1) Cu2+ and its selectivity relative to several alkali, alkaline earth, transition, and heavy metal ions was good. The coated-wire electrode could be used for at least two months without a considerable alteration of its potential. Applications of the electrode for determination of copper in milk powder samples and as an indicator electrode for potentiometric titration of Cu2+ ion using EDTA are reported.     

Thiocyanate: selective membrane electrode based on macrotricyclic binuclear Cu(II)–Schiff base complex

A highly selective PVC membrane electrode was prepared for thiocyanate (SCN^?) determination, based on macrotricyclic binuclear Cu(II)–Schiff base complex as an ionophore. The novel macrotricyclic compound (cryptand) was synthesized by condensation of 4,4′-diamino-dibenzo-18-crown-6 with bis(4-formyl phenyl)terephthalate under high-dilution condition and the structure was confirmed by FT-IR, ¹H NMR,¹³C NMR and MS studies. The Cu(II) complex of the compound was prepared and was examined for use as anion-selective electrode as a carrier which displays an anti-Hofmeister selectivity sequence in following order: SCN^? > ClO₄ ^? > NO₃ ^? > CN^? > I^? > CO₃ ^2? > NO₂ ^? > Br^? > Cl^? > SO₄ ^2? with a preference for thiocyanate ion over many common anions. The electrode has a linear dynamic range between 1.0 × 10^?7 and 1.0 × 10^?1 M, with a Nernstian slope of ?58.9 mV decade^?1 and detection limit of 3.1 × 10^?8 M. The working pH range of the sensor was found be in the range of 3.0–8.0. It exhibits a fast response time of 20 s and has a lifetime of about 2 months. Application of the electrode for determination of thiocyanate in waste water samples and in human urine samples have also been demonstrated.     

Cyanide ion selective solid contact electrode based on nickel complex of N,N′-bis-(4-phenylazosalicylidene)-o-phenylene diamine ionophore

A cyanide ion selective poly(aniline) solid contact electrode based on nickel complex of N,N′-bis-(4-phenylazosalicylidene)-o-phenylenediamine ionophore was successfully developed. The electrode exhibits a good linear response of 58.7 mV/decade (at 20 ± 0.2°C, r ² = 0.998) with in the concentration range of 1 × 10^?1.0-1 × 10^?6.0 M cyanide. The composition of this electrode was: ionophore 0.300, polyvinylchloride 0.300, 2-nitrophenyloctyl ether 0.670 (mass). This 2-nitrophenyloctyl ether plasticizer provides the best response characteristics. The electrode shows good selectivity for cyanide ion in comparison with any other anions and is suitable for use with aqueous solutions of pH 4.6–6.3. The standard deviations of the measured emf difference were ±1.92 and ±1.87 mV for cyanide sample solutions of 1.0 × 10^?2 M and 1.0 × 10^?3 M, respectively. The stabilization time was less than 183 s and response time was less than 38 s.     

Crescent aromatic oligothioamides as highly selective receptors for copper(Ⅱ) ion

A series of crescent aromatic oligothioamides(4, 6, 8, 15, and 18) bearing different number of sulfur atoms were designed and synthesized via thionation of their corresponding aromatic oligoamides(3, 5, and 7) using Lawesson's reagent. The X-ray structure of a trimeric analogue(13) revealed the presence of intramolecular three-center hydrogen bonds that are responsible for the rigidification of the molecular backbone. The extraction by these novel receptors toward some representative heavy metal cations(Zn2+, Cd2+, Co2+, Ni2+, Pb2+, and Cu2+) and alkali and alkaline earth metal cations(Li+, Na+, K+, Rb+, Cs+, Ca2+, and Sr2+) demonstrated high efficiency(83.5%–96.4%) and superior selectivity for Cu2+ over other selected metal cations. Particularly, the extractability was correlated to both the number of sulfur atoms and orientation of thiocarbonyl groups as revealed in the order: 6 4 18 15. This is in stark contrast to the oligoamides that only gave much lower extractability(5.9%–16.4%), suggestive of the importance of replacement of carbonyl oxygen atoms with sulfur atoms in the extraction of Cu2+. The complexation behavior of 4, 6, and 8 with Cu2+ was also examined by UV-Vis and NMR techniques.     

A bismuth(Ⅲ) PVC membrane ion selective electrode based on5-(3,4,5-trimethoxyphenyl)-4-amino-1,2,4-triazole-3-thiol

The construction,performance characteristics and application of a new bismuth(Ⅲ) PVC membrane electrode based on 5-(3,4,5-trimethoxyphenyl)-4-amino-1,2,4-triazole-3-thiol are reported in this paper.The designed sensor exhibited a Nernstian response for Bi~(3+) ion ranging from 5.0×10~(-7) mol/L to1.0×10~(-2) mol/L with a slope of 19.8 mV/decade.The operational pH range of the sensor is 3.0-6.0.The electrode shows a response time of 6 s and can be used for at least five weeks without any considerable divergence in potentials.It exhibits very good selectivity relative to a wide variety of alkali,alkaline earth,transition and heavy metal ions.The proposed electrode could be used as an indicator electrode in potentiometric titration of Bi~(3+) ions with EDTA and in the determination of Bi~(3+) content in stomach medicine.     

Erbium(Ⅲ) PVC membrane sensor based on N-(benzyloxycarbonyloxy)succinimide as a new neutral ionophore

In this study,a new Er³⁺ sensor based on N-（benzyloxycarbonyloxy）succinimide（BCS） as a neutral carrier has been constructed. The sensor exhibits potential linear response with a Nernstian slope of 20.5±0.4 mV/decade in the concentration range of 1.0×10^-6to 1.0×10^-2mol/L of Er³⁺.It has a very short response time（<10 s）,detection limit of 6.3×10^-7 mol/L and a good selectivity relative to a wide variety of other metal ions including common alkali,alkaline earth,heavy,and transition metal ions.It can be used in the pH range of 2.5-10.6 without any considerable divergence in potentials.The proposed sensor was successfully applied for the recovery of Er³⁺ ions spiked in tap and river water samples.     

A highly selective turn-on colorimetric and luminescence sensor based on a triphenylamine-appended ruthenium(Ⅱ) dye for detecting mercury ion

A dual colorimetric and luminescent sensor based on a heteroleptic ruthenium dye[Ru(Hipdpa)(Hdcbpy)(NCS)_2]~-·0.5H~+ 0.5[N(C_4H_9)_4]~+ Ru(Hipdpa) {where Hdcbpy = monodeprotonted-4,4'-dicarboxy-2.2'-bipyridineand Hipdpa = 4-(1H-imidazo[4,5-f][l,10]phenanthroIin-2-yl)-N,N-diphenylaniIine} for selective detection of Hg~(2+) is presented.The results of spectrophotometric titrations revealed an evident luminescence intensity enhancement(I/I_0 =11) and a considerable blue shift in visible absorption and luminescence maxima with the addition of Hg~(2+).The sensitive response of the optical sensor on Hg~(2+) was attributed to the binding of the electron-deficient Hg~(2+) to the electron-rich sulfur atom of the thiocyanate(NCS) ligand in the Ru(Hipdpa).which led to an increase in the energy gap between the highest occupied molecular orbital(HOMO) and the lowest unoccupied molecular orbital(LUMO).Accordingly,the blue shift in the absorption spectrum of Ru(Hipdpa) due to the binding of Hg~(2+) was obtained.Ru(Hipdpa) was found to have decreased Hg~(2+) detection limit and improved linear region as compared to di(tetrabutylammonium) ris-bis(isothiocyanato)bis(2,2'-bipyridine-4-carboxylic acid-4'-carboxylate)ruthenium(Ⅱ) N719.Moreover,a dramatic color change from pink to yellow was observed,which allowed simple monitoring of Hg~(2+) by either naked eyes or a simple colorimetric reader.Therefore,the proposed sensor can provide potential applications for Hg~(2+) detection.     

ESR study on some copper(Ⅱ)complexes of bis(4''''-benzo-15-crown-5)

ESR measurements have been carried out for some copper(Ⅱ) complexes of bis(4'-ben-zo-15-crown-5) at 77 K.The results of ESR spectrometric titration indicated that the binuclear com-plexes were prepared in the present system.The binuclear complexes revealed characteristic ESRg-anisotropies (gZ相似文献   

A highly selective and easy-to-synthesize Zn(Ⅱ) fluorescent probe based on 6-methoxyquinolin

A novel fluorescent Zn²⁺ probe based on 6-methoxyquinolin was synthesized in four steps from inexpensive starting materials.It exhibits very strong fluorescence responses and has a remarkably high selectivity to Zn²⁺ than other physiological relevant metal ions.This new compound could be used as low-priced yet high-quality Zn²⁺ probe.     

Highly selective thiocyanate poly(vinyl chloride) membrane electrode based on a cadmium–Schiff’s base complex

A PVC membrane electrode based on a cadmium–salen (N,N′-bis-salicylidene-1,2ethylenediamine) complex as an anion carrier is described. The electrode has an anti-Hofmeister selectivity sequence with a preference for thiocyanate at pH 1.5–11.0. It has a linear response to thiocyanate from 1.0 × 10^–6 to 1.0 × 10^–1 mol L^–1 with a slope of 59.1 ± 0.2 mV per decade, and a detection limit of 7 × 10^–7 mol L^–1. This electrode has high selectivity for thiocyanate relative to many common organic and inorganic anions. The proposed sensor has a fast response time of approximately 15 s. It was applied to the determination of thiocyanate in a milk sample. Received: 1 December 2000 / Revised: 19 April 2001 / Accepted: 30 April 2001     

Chromotropism in halo-bridged dimers. Structural characterization of bis(μ-halo)bis(halo N-(pyridin-2-ylmethyl)cyclohexanamine copper(II))

Two dinuclear copper(II) complexes, [LCu(μ-Cl)Cl]₂ (DMF) (1) and [LCu(μ-Br)Br]₂ (2), with the bidentate ligand N-(pyridin-2-ylmethyl)cyclohexanamine, L, were synthesized and characterized by physicochemical and spectroscopic (IR, UV–vis) data. The crystal structural analysis of 1 shows that both copper(II) ions are in a distorted square pyramidal N₂Cl₃ environment with the apical position of the copper(II) being occupied by the bridging chloride anion which is equatorial to the other copper ion, forming a dimeric copper(II) complex. The chromotropic properties of both complexes, including solvato-, thermo-, and halochromism, were investigated. The complexes show reversible thermochromism in solution which is irreversible in the solid state. It was found that the solvatochromism is due to structural change followed by solvation of the vacant sites of the complexes. Their halochromic properties were studied in pH range of 1–11 by visible absorption spectroscopy. The color changes from blue to green and to colorless are due to deprotonation and protonation of the ligands.     

Bis(1,8-naphthylimides) and bis(1′,8′-naphthoylene-1,2-benzimidazoles) based on new bis(naphthalic anhydrides)

The reaction of bis(naphthalic anhydrides) with aniline and o-phenylenediamine under conditions of hightemperature cyclocondensation in m-cresol in the presence of a catalyst (benzoic acid) gives bis(1,8-naphthylimides) and bis(1,8-naphthoylene-1,2-benzimidazoles) which model the elementary units of polyimides and polynaphthoylenebenzimidazoles, respectively.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 649–652, May, 1991.     

Fluorescence “turn-on” chemosensor for the selective detection of zinc ion based on Schiff-base derivative

N,N′-phenylenebis(salicylideaminato) (L) has been used to detect trace amounts of zinc ion in acetonitrile–water solution by fluorescence spectroscopy. The fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to zinc ions in MeCN/H₂O (1:1, v/v) solution. The fluorescence enhancement of L is attributed to the 1:1 complex formation between L and Zn(II), which has been utilized as the basis for selective detection of Zn(II). The linear response range for Zn(II) covers a concentration range of 1.6 × 10^?7 to 1.0 × 10^?5 mol/L, and the detection limit is 1.5 × 10^?7 mol/L. The fluorescent probe exhibits high selectivity over other common metal ions, and the proposed fluorescent sensor was applied to determine zinc in water samples and waste water.     

Luminescent organic 1D nanomaterials based on bis(β-diketone)carbazole derivatives

A series of new triphenylamine-functionalized bis(β-diketone)s bridged by a carbazole (CnBDKC, n=1, 4, 8, 16) with twisted intramolecular charge-transfer emission in polar solvents has been synthesized. The length of the carbon chains has a significant effect on the self-assembling properties of the compounds. Well-defined 1D nanowires were easily generated from C1BDKC with a methyl group by a reprecipitation approach directed by π-stacking interaction, and the molecules packed into J-aggregates in the nanowires. In addition, 1D nanofibers based on C16BDKC bearing a long hexadecyl chain were prepared through the organogelation process, and H-aggregates were formed driven by the synergistic effect of π-stacking interaction and van der Waals force in the gel phase. C4BDKC and C8BDKC containing butyl and octyl side chains, respectively, cannot arrange into dispersed nanostructures, probably because π-π interaction between conjugated moieties might be disturbed by the interaction between the side chains, which is, however, not strong enough to dominate the self-assembling process. Notably, the nanowires based on C1BDKC and the gel nanofibers from C16BDKC can emit strong green light under irradiation, which suggests that these 1D nanomaterials may have potential applications in emitting materials as well as photonic devices.     

A theoretical study on magnesium ion–selective two-photon fluorescent probe based on benzo [h] chromene derivatives

The geometrical structure, electronic structure, and one-photon absorption (OPA) properties of a series of magnesium ion (Mg²⁺)-selective fluorescent probes based on benzo [h] chromene derivatives have been theoretically studied by using density functional theory (DFT) method and Zerner’s intermediate neglect of differential overlap (ZINDO) methods. Their two-photon absorption (TPA) properties are also calculated by using the method of ZINDO/sum-over-states. Results show that all studied probe molecules exhibit large TPA cross-section (δ_max) in response to Mg²⁺ in 700- to 1,200-nm range. Furthermore, the δ_max can be greatly enhanced by introducing acceptor groups to the lateral side of benzo [h] chromene. And that probes with stronger acceptor group show larger δ_max and result in 70-fold enhancing when coordinate with Mg²⁺. Significantly, probe molecules with good cell permeability were also studied by replacing the hydrogen group with acetoxymethyl ester, but δ_max changed slightly. These results shed light into the design strategy of efficient TP fluorescent probes with large δ_max and good cell permeability for Mg²⁺ sensing in living systems.     

Kinetics and mechanism of reactions of bis(biguanide)copper(II) ion with glycine and α-alanine in aqueous media

Summary The kinetics of the reaction of [Cu(bigH)₂]²⁺ (bigH = biguanide) with an excess of amino acid (LH), namely glycine or -alanine, in aqueous solution in the 7.6–9.0 pH range at different temperatures (30–40° C) have been followed by stopped-flow spectrophotometry. The ligand replacement process has been found to pass through intermediate formation of a ternary complex, [Cu(bigH)L]⁺ at the slower step, followed by rapid transformation into the binary complex, [CuL₂]. The overall ligand replacement process has a ligand dependent (k ₁) path which is first order with respect to the incoming ligand (L^-), and a ligand independent (k ₀) path. Under pseudo-first order conditions containing excess amino acid, the experimental observations conform to the rate law k _obs = k ₀ + k ₁ K _a[L]_T/([H⁼] + K _a), where [L]_T stands for the total concentration of amino acid and K _a gives the deprotonation constant of LH. The solvent assisted dissociation (i.e. k ₀ path) leads to a copper(II) mono-biguanide complex followed by rapid nucleophilic substitution; the k ₁ path is in agreement with an associative mechanism. The activation parameters (H , S ) for each step have been determined.     

Potentiometric determination of diclofenac in pharmaceutical formulation by membrane electrode based on ion associate with base dye

The characteristics,performance and application of membrane electrode based on ion associate of diclofenac with base dye Safranine T are described.The electrode response to diclofenac has the sensitivity of 47±1.0 mV decade~(-1)over the range of 5×10~(-5)to 5×10~(-2)mol/L at pH 6-12,and the detection limit of 3.2×10~(-5)mol/L.The electrode is easy assembled at a relatively low cost has fast response time(2-4 s)and can be used for a period up to 3.5 months without any considerable divergence in potential.The proposed sensor displayed good selectivity for diclofenac in the presence of different substances.It was used to determine diclofenac in pharmaceuticals by means of the standard addition method.     

An ionophore–Nafion modified bismuth electrode for the analysis of cadmium(II)

A novel ionophore–Nafion modified bismuth electrode is described for sensitive and selective anodic stripping analysis of cadmium(II). The electrode is prepared by coating the glassy carbon electrode with the cadmium ionophore N,N,N′,N′-tetrabutyl-3,6-dioxaoctanedi(thioamide) and Nafion composite. Bismuth is deposited in situ on the electrode surface by plating simultaneously with cadmium in sample solution. Numerous key variables affecting the current response of cadmium have been optimized. The electrode has a linear concentration range of 0.5–10 nM with a deposition time of 180 s. The detection limit is 1.3 × 10^?10 M and the relative standard deviations for 0.5 and 7 nM cadmium are 6.5% and 4.5%, respectively. The proposed electrode shows excellent selectivity over other heavy metals, such as copper, lead and indium. The attractive performance of such electrode offers a feasible way to monitor trace cadmium(II) rapidly and precisely in complex matrixes.     

Tris(2,2''''-bipyridyl)ruthenium(Ⅱ) electrochemiluminescence (ECL) enhanced by rutin on platinum electrode

Ru(bpy)_(3~(2 )) electrochemiluminescence (ECL) was applied to determination of rutin. ECL intensity of Ru(bpy)_(3~(2 ))could be enhanced in the presence of rutin in basic solution on platinum electrode. At pH 9.9, light emission intensity was found to be linear with rutin in the range of 1-50 mmol/L.