Determination of uranium, thorium and rare-earth elements in zircon samples using ICP-MS

Zircon is an accessory mineral, which occurs at low concentrations in a wide variety of rocks and is a host for hafnium, rare-earth elements (REE) and radio active elements like uranium and thorium. The presence of uranium in zircon has led to its increased use in the age determination of rocks. Zirconium is also considered as a strategic, hi-tech element because of its various applications, especially in the manufacturing, nuclear and aerospace industries. Analysis of zircon constitutes one of the tough tasks in analytical chemistry as it is a highly resistant mineral and it is extremely difficult to achieve its complete decomposition. In the present work, inductively coupled plasma mass spectrometry has been applied to the determination of hafnium, REE, uranium and thorium in zircon samples using two different sample dissolution procedures, one employing sodium peroxide fusion and another using a fusion mixture of KHF₂ and NaF in 3:1 ratio. Some selected zircon samples originating from different places on the eastern coast of India have been analysed by both the methods and values obtained by both methods were found to be in good agreement with each other. Though a number of international zircon reference materials are available, certified or even proposed values are available only for a very few elements in them. Two zircon reference materials have also been analysed by both methods and usable values have been proposed in this paper. The values obtained by both methods were found to compare well with each other and as well with those reported in literature. The % RSD for all the estimated elements varied from 1.0 to 12.0% at different concentration levels.     

High performance liquid chromatographic studies on lanthanides, uranium and thorium on amide modified reversed phase supports

The retention behavior of uranium, thorium and lanthanides has been investigated with amide modified reversed phase C₁₈ supports using α-hydroxy isobutyric acid (α-HIBA) as the mobile phase. Four structurally different amide moieties namely, 4-hydroxy-N,N-dihexyl butyramide (4HHBA), 4-hydroxy-N,N-di-2-ethylhexylhexanamide (4HEHHA), bis(N,N,N′,N′-2-ethylhexyl)malonamide (B2EHM) and N-methyl-tris(dihexylcarbamoyl-3-methoxy)pivolamide (MTDCMPA) have been synthesized and studied. Among the various amide coated columns, the supports modified with 4HHBA, B2EHM and MTDCMPA exhibit an interesting retention for uranium and thorium, which is different from 4HEHHA modified support. The retention time for uranium and thorium increases with increasing amide concentration for 4HHBA, B2EHM and MTDCMPA supports, while the same decreases with increasing 4HEHHA content. However, the separation factor for uranium and thorium is greater on a 4HEHHA support, compared to an unmodified C₁₈ column, reflecting the amide's preferential complexation of uranium over thorium.Columns modified with 4HHBA, B2EHM and MTDCMPA exhibit relatively higher retentions for lanthanides. However, MTDCMPA modified support shows a different elution profile for lanthanides compared to 4HHBA, and B2EHM modified columns. Individual separations of heavier lanthanides, i.e., from gadolinium to lutetium also have been achieved using 4HHBA and B2EHM modified supports.The influence of modifier content, mobile phase concentration and its pH on the retention of metal ions has also been studied. Based on these investigations, an efficient high performance liquid chromatographic method (HPLC) has been developed for the rapid separation of uranium from thorium as well as for the individual separation of heavier lanthanides.     

An improved extraction chromatographic resin for the separation of uranium from acidic nitrate media

The preparation and characterization of a new extraction chromatographic resin exhibiting extraordinarily strong retention of hexavalent uranyl ion over a wide range of nitric acid concentrations and very high selectivity for U(VI) over Fe(III) and numerous other cations is described. This new material (designated U/TEVA-2) comprises a novel liquid stationary phase consisting of an equimolar mixture of diamyl amylphosphonate (DA[AP]) and Cyanex 923^® (a commercially available trialkyl-phosphine oxide, TRPO) sorbed on silanized silica or Amberchrom CG-71. Cyanex 923 is shown to be preferable to a related TRPO, Cyanex 925^®, due to its lower viscosity and higher selectivity for U(VI) over Fe(III). The retention of uranyl nitrate by the U/TEVA-2 resin, as measured by the k′ values (number of free column values to peak maximum) is >5000 from approximately 0.1 to 8 M HNO₃. The ability of the new resin to strongly and selectively retain U(VI) from such a wide range of acid concentrations, along with its favorable physical properties, make it a good candidate for application in the separation and preconcentration of U(VI) from complex environmental, biological, and nuclear waste samples for subsequent determination.     

Paper chromatographic separation of thorium, zirconium and uranium

Summary The possibility of paper chromatographic separation of a number of elements (Th, U, Zr, Fe, Mg, Ni, Co, Ce, La, Y, Sm, Gd) has been studied, employing solvent mixtures containing tri-n-butyl phosphate (TBP) as principal constituent. Various factors that influence the R_f values have been investigated. It has been made possible to separate only thorium and uranium from the other elements including the rare earths and also from one another. Only thorium and uranium move under the conditions studied, the others remain stationary on the starting line. The solvent mixture methylisobutyl ketone-isobutyl alcohol-TBP (503812) shaken with 4 M HNO₃ proved to be a good mobile solvent for the separation of thorium and uranium. Thorium has also been separated from monazite extract. A single chromatogenic spray (-SNADNS-6) has been used for the detection of all the elements. Thorium, uranium and zirconium have also been quantitatively estimated after chromatographic separation by EDTA titration using the same dye.

---

Zusammenfassung Die Möglichkeit der papierchromatographischen Trennung verschiedener Elemente (Th, U, Zr, Fe, Mg, Ni, Co, Ce, La, Y, Sm, Gd) mit tributylphosphathaltigen Laufmitteln ist untersucht worden. Hierbei wurde die Beeinflussung der R_f-Werte durch verschiedene Faktoren geprüft und eine Möglichkeit zur Trennung von Thorium und Uran voneinander sowie von anderen Metallen gefunden. Als Laufmittel hat sich am besten das Gemisch Methylisobutylketon-Isobutanol-Tributylphosphat (503812), äquilibriert mit 4 n Salpetersäure, bewährt. Nur U und Th wandern, alle anderen Elemente bleiben auf der Startlinie. Thorium konnte auch aus Monazitextrakt abgetrennt werden. -SNADNS-6 dient als einziges Nachweisreagens für alle genannten Metalle und wird auch als Indicator benutzt bei der komplexometrischen Titration von Zr, Th und U im Anschluß an die papierchromatographische Abtrennung.

     

Reversed-phase liquid chromatography using mandelic acid as an eluent for the determination of uranium in presence of large amounts of thorium

Studies were carried out for the separation of uranium (U) and thorium (Th) on reversed-phase (RP) C₁₈ columns using mandelic acid as an eluent. Retention of thorium–mandelate on the unmodified stationary phase was found to be greater than that of uranyl–mandelate under the pH conditions employed. Th retention capacity of the stationary phase was determined as a function of pH and MeOH content of the mobile phase. The optimised parameters allowing U elution prior to Th were utilized for the determination of small amounts of U in the presence of large amounts of Th. The method has been used for the determination of U in synthetic samples with Th/U amount ratios up to 100,000 (10 μg/g of U) without any pre-separation, employing a particulate C₁₈ column. Effect of concentration of ion interaction reagents (IIRs) on the retention was studied to understand the mechanism of adsorption of their mandelate complexes onto the stationary phase. The experiments conducted unequivocally prove that thorium–mandelate complex is neutral whereas uranyl–mandelate complex is anionic in nature.     

Determination of uranium, thorium and plutonium isotopes by ICP-MS

Quantitative and isotopic measurement of actinide elements is required in many circumstances in the nuclear industry. For example, determination of very low levels of these alpha emitters in human urine samples is used to assess the internal committed dose for nuclear workers. Quantifying actinide isotopes in radioactive waste from nuclear processing and nuclear facility decommissioning provides important information for waste management. Accurate determination of the uranium isotopic ratios in reactor fuels provides fuel burnup information. Inductively coupled plasma mass spectrometry (ICP-MS) has been used for the determination of Th, U, and Pu in various samples including urine, nuclear waste, and nuclear fuel in our laboratory. In order to maximize the capability of the technique and ensure quality analyses, ICP-MS was used to analyze samples directly, or after pre-treatment to separate complicated matrices or to concentrate the analyte(s). High-efficiency sample introduction techniques were investigated. Spectral interferences to minor isotopes caused by peak tails and hydride ions of major actinide isotopes were studied in detail using solutions prepared with light and heavy waters. The quality of the isotopic ratio measurement was monitored using standard reference materials.     

Simultaneous separation and detection of anions and thiophilic cations using capillary‐size anion exchange chromatography with suppressed conductivity detection

In this fundamental study, the simultaneous separation and detection of anions and thiophilic cations in anion exchange chromatography with suppressed conductivity detection is investigated. Mercury(II) and cadmium(II) served as model analytes. Separation and detection was performed by introducing 2‐mercaptoethanesulfonate, which forms complexes with both mercury and cadmium with a strong metal–sulfur bond, into the KOH eluent. Additional to the separation on the column, these complexes were able to pass the suppressor. Subsequently, they could be detected as negative peaks. A simple model for the separation mechanism was developed based on these results. Furthermore, the effect of the eluent concentration on the retention factors of both cation complexes and standard anions was examined and quantified. It revealed that the concentration of 2‐mercaptoethanesulfonate has more influence on the cations than the KOH concentration. Also, 2.0 mM of 2‐mercaptoethanesulfonate had about the same effect on the anion separation as 60 mM KOH. Finally, selectivity and detection limits were investigated. The detection limits were 4.9 μM for mercury and 2.2 μM for cadmium.     

Determination of mercurial species in fish by inductively coupled plasma mass spectrometry with anion exchange chromatographic separation

This work demonstrated the feasibility of mercury speciation analysis by anion exchange chromatographic separation with inductively coupled plasma mass spectrometry detection. For the first time, by complexing with the mobile phase containing 3-mercapto-1-propanesulfonate into negatively charged complexes, fast separation of inorganic mercury (Hg²⁺), monomethylmercury (MeHg), ethylmercury (EtHg) and phenylmercury (PhHg) was achieved within 5 min on a 12.5-mm strong anion exchange column. The detection limits for Hg²⁺, MeHg, EtHg and PhHg were 0.008, 0.024, 0.029 and 0.034 μg L⁻¹, respectively. The relative standard deviations of peak height and peak area (5.0 μg L⁻¹ for each Hg species) were all below 3%. The determined contents of Hg²⁺, MeHg and total Hg in a certified reference material of fish tissue by the proposed method were in good accordance with the certified values with satisfactory recoveries. The relative errors for determining MeHg and total mercury were −2.4% and −1.2%, respectively, with an acceptable range for spike recoveries of 94–101%. Mercury speciation in 11 fish samples were then analyzed after the pretreated procedure. The mercury contents in all fish samples analyzed were found compliant with the criteria of the National Standards of China.     

Anion-exchange separation and spectrophotometric determination of thorium in geological samples

To determine thorium in geological samples it is first separated from all matrix elements by means of anion-exchange. After elution thorium is determined spectrophotometrically by using thoronol or arsenazo III. The suitability of the method for the determination of both trace and larger amounts of thorium was tested by analysing numerous geochemical standard samples with thorium contents in the range of 1-1000 ppm. In all cases very good agreement was obtained.     

Development of an integrated flow injection system for the electro-oxidative leaching of uranium from geological samples and its spectrophotometric determination with Arsenazo III

This work proposes a new procedure for on-line electro-oxidative leaching and spectrophotometric determination of uranium in ore samples. By associating a conventional flow injection system, used for uranium determination with Arsenazo III, with an on-line system for electro-oxidative leaching, a fully integrated system was assembled. The systems were integrated after achieving optimum conditions for uranium determination and leaching. According to the results obtained in the present work, a current density of 280 mA cm⁻² generated enough hypochlorite ions in the electrolyte solution (3.6 mol L⁻¹ HCl + 2% (w/v) NaCl) to promote quantitative oxidation of U(IV) to U(VI) thus improving the extraction efficiency. The slurry density did not significantly affect the performance of the system and the increasing temperature resulted in a decrease in extraction efficiency. This methodology was applied in the determination of U₃O₈ in four ore samples and the results obtained agreed with those obtained by ICP-MS after conventional wet acid digestion of the samples.     

Investigation of radioactive lead,uranium, and thorium in environmental waters by extraction chromatography resins

A time-saving and sensitive method for monitoring low concentration (activities) of ²¹⁰Pb, ²³²Th, and ²³⁰Th and ²³⁸U, ²³⁴U, and ²³⁵U in water samples has been developed. Through the combination of co-precipitation and extraction chromatography by 3M RAD disks and UTEVA (Eichrom) columns effective radiochemical separation of the analytes was carried out. Thorium and uranium activities were determined by alpha spectrometry and lead activity by LSC, respectively. The minimal detectable activities obtained were 0.6?Bq?m^?3 for uranium, 0.29?Bq?m^?3 for thorium, and 2.5?Bq?m^?3 for ²¹⁰Pb. More than 150 different waters were analysed for uranium content and only 30 for lead and thorium. The investigations are still in progress.     

分光光度法测定三氧化铀中的硫酸根

采用TBP-萃淋树脂吸附三氧化铀样品中的铀,硫酸根与铬酸钡进行交换反应后,直接比色法测定硫酸根的含量。实验中研究了三氧化铀样品中硫酸根含量测定的样品制备、分离、反应酸度,煮沸时间,铬酸钡用量等影响因素。优化条件下,采用硝酸(5mol/L)淋洗、1mL HCl溶液(2.5mol/L)调节溶液中酸浓度、使用2mL BaCrO_4进行交换反应、煮沸3min,得到方法相对标准偏差小于10%,加标回收率为92.9%～110%。实验结果表明,直接显色的测定方法灵敏、快速、准确度高。方法测定条件易于获得,适于推广应用。     

Determination of uranium in seawater by flow-injection preconcentration on dodecylamidoxime-impregnated resin and spectrophotometric detection

A flow injection method has been developed for the determination of uranium in seawater combining the on-line preconcentration with spectrophotometric detection. An aliquot (10 mL) of the seawater sample adjusted to pH 5.5 was injected into the analytical system and uranium was adsorbed on the column packed with styrene-divinylbenzene copolymer resin (Bio-Beads SM-2) modified with dodecylamidoxime which showed high selectivity to uranium. Uranium was then eluted with 0.01 M hydrochloric acid and detected spectrophotometrically after the reaction with Chlorophosphonazo III. Interference from calcium and strontium was masked with cyclohexanediaminetetraacetic acid added to the chromogenic reagent solution. The sample throughput, the detection limit (3σ), and the preconcentration factor were 23 per hour, 0.13 μg/L, and 20, respectively, when the sample injection volume was kept at 10 mL. The precision at the 2 μg/L level was less than 4% (RSD). The proposed method was applied to the determination of uranium in the seawater samples collected off the Boso peninsula, Japan and the uranium concentration was found to be ca. 3 μg/L, which is close to the literature data. The yield of the recovery test ranged from 95% to 99%.     

Extraction chromatography of common anions in liquid-liquid anion exchange systems. Part. III. Monobasic aliphatic organic acids and their sodium salts as eluants

Summary The chromatographic behaviour of anions on paper strips treated with tri-n-octylamine (TOA) salts or Aliquat 336 and developed with aqueous solutions of acetic, formic, monochloroacetic or trifluoroacetic acids and their sodium salts was investigated. Liquid-liquid extraction of organic acids by 0.1 M solution of TOA in benzene as well as the anion exchange between benzene solutions of TOA salts or Aliquat 336 (in acetate form) in benzene and aqueous solutions of sodium halides was also studied. It was found that extraction increases in the following order of the acids: CH₃COOOH<HCOOH<CH₂CICOOH<CF₃COOH; the relative affinity of organic anions to the quaternary alkyl-ammonium cation also increase in a similar order. The extraction of acid in excess over the amount necessary to neutralize the amine was observed for all four acids. The R_F values of anions investigated depend markedly on the type of organic acids or their salts and their concentration in the mobile phase. Halide ions are more strongly retained on paper treated with Aliquat 336 as compared with TOA salts. The chromatographic systems investigated offer many possibilities to separate various anion mixtures.Parts and II: refs. [1, 2].     

Environmental Analysis of Thorium (IV) by Extractive Separation with N-p-Methoxyphenyl-2-furylacrylohydroxamic Acid and Spectrophotometric Determination with 4-(2-Pyridylazo) Resorcinol

Abstract

Thorium (IV) was separated from several anions and cations commonly associated with it in environmental samples by liquid-liquid extraction with N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA) into chloroform at pH 3.6–5.5. The metal was then back-extracted into aqueous media containing 1.8–2.2 M HCl and determined spectrophotometricall) at 500 nm (? = 3.9 × 10⁴ 1 mol^?1 cm^?1) with 4-(2-pyridylazo) resorcinol [PAR]. The method was successfully applied to the analysis of thorium in coal fly ash, monazite, uranium-thorium ore, animal tissue, plant tissue, and natural waters. MFHA and PAR were chosen from thirteen hydroxamic acids and nine pyridylazo reagents, as the reagent combination that provided the maximum selectivity and sensitivity.     

Determination of thorium,uranium and plutonium isotopes in atmospheric samples

A new procedure for the radiochemical measurements of thorium, uranium and plutonium in atmospheric samples is described. Analysis involves coprecipitation of these actinides with iron hydroxide from a 40-to 50-dm³ sample of rainwater, followed by radiochemical separation and purification procedures by the use of ion exchange chromatography (Dowex AG1×8) and solvent extraction. The new procedure enables one to determine the isotopes of thorium, uranium and plutonium, which are found in rainwater at extremely low concentrations, with a chemical yield ranging from 60 to 80%.     

Condensation reaction in the bandpass reaction cell improves sensitivity for uranium,thorium, neodymium and praseodymium measurements

Condensation reactions in the bandpass reaction cell or dynamic reaction cell (DRC) were used for the determination of actinides and lanthanides such as uranium, thorium, neodymium and praseodymium. These elements react with oxygen reagent gas in the dynamic reaction cell of the ELAN DRC II instrument to give mono- and/or dioxo cationic species (UO₂⁺, ThO⁺, NdO⁺ and PrO⁺, respectively). Increasing the oxygen flow rate in the dynamic reaction cell leads to the rapid decrease of the singly charged metal ions accompanied by the fast increase in the intensity of the oxide ion. This phenomenon is used to improve considerably the sensitivity of ICP-MS instruments equipped with a dynamic reaction cell for actinides and lanthanides. Estimated detection limits (EDL) obtained in this work for uranium, thorium, neodymium-144 and praseodymium are 0.022, 1.0, 0.045, and 0.10 ng L^–1, respectively. The detection limit for uranium measured in the standard (vented) mode of an ELAN DRC II was found to be 0.22 ng L^–1, which is an order of magnitude higher compared to the pressurized mode.     

Ion-exchange separation of uranium,thorium and plutonium isotopes from environmental samples

Radioisotopes of uranium, thorium and plutonium in water, soil and fertilizer samples, have been chemically separated and determined by alpha-spectrometry method. Radiochemical procedure involving ion-exchange, enabled to determine these isotopes in very low concentrations (under 50 Bq/g).²³²U,²²⁹Th and²³⁸Pu were used as a tracers for radiochemical yield recoveries (up to 90%). Thin layer sources have been obtained by electrodeposition.     

Sequential separation and determination of uranium and thorium isotopes in soil samples with Microthene-TOPO chromatographic column and alpha-spectrometry

In the method, soil was fused together with Na₂CO₃ and Na₂O₂ at 600 °C, uranium and thorium were leached out with HCl, HNO₃ and HF, and HClO₄ was used to eliminate the residual HF through evaporation. The leaching solution (2 M HNO₃) was passed through a Microthene-TOPO column to adsorb uranium and thorium. Thorium was first eluted with 2 M HCl and electrodeposited in 0.025 M H₂C₂O₄ + 0.15 M HNO₃ on a stainless steel disc. Uranium was eluted with a 0.025 M ammonium oxalate solution and also electrodeposited. Both thorium and uranium isotopes on the discs were measured separately by α-spectrometry.     

Influence of hydrofluoric acid on extraction of thorium using a commercially available extraction chromatographic resin

The dependence of Th recovery on hydrofluoric acid (HF) concentration in nitric acid (HNO₃) solutions (1–5 mol/dm³) containing 1 × 10⁻⁶ mol/dm³ of Th and various concentrations of HF and the elution behavior were studied using a commercially available UTEVA (for uranium and tetravalent actinide) resin column. Thorium recovery decreased with an increase in HF concentration in the sample solutions. The concentration of HF at which Th recovery started to decrease was ∼1 × 10⁻⁴ mol/dm³ in 1 mol/dm³ HNO₃ solution, ∼1 × 10⁻³ mol/dm³ in 3 mol/dm³ HNO₃ solution, and ∼1 × 10⁻² mol/dm³ in 5 mol/dm³ HNO₃ solution. When Al(NO₃)₃ (0.2 mol/dm³) or Fe(NO₃)₃ (0.6 mol/dm³) was added as a masking agent for F⁻ to the Th solution containing 1 × 10⁻¹ mol/dm³ HF and 1 mol/dm³ HNO₃, Th recovery improved from 1.4 ± 0.3% to 95 ± 5% or 93 ± 3%. Effective extraction of Th using UTEVA resin was achieved by selecting the concentration of HNO₃ and/or adding masking agents such as Al(NO₃)₃ according to the concentration of HF in the sample solution.