Unexpected product formed by the reaction of [2,6-(MeOCH2)2C6H3]Li with SbCl3: Structure of Sb-O intramolecularly coordinated organoantimony cation

Reaction of [2,6-(MeOCH₂)₂C₆H₃]Li (1) with SbCl₃ in 1:1 molar ratio yielded except the intended product [2,6-(MeOCH₂)₂C₆H₃]SbCl₂ (2) unexpected complex 3 consisting of antimony anion [Sb₆Cl₂₂]⁴⁻ compensated by four intramolecularly coordinated organoantimony cations [2,6-(MeOCH₂)₂C₆H₃]₂Sb⁺. Compound 3 is labile in CH₂Cl₂(CHCl₃) solution and decomposes to compound 2 and SbCl₃. Both compounds were characterized by the help of ¹H and ¹³C NMR spectroscopy, ESI-mass spectrometry and in the case of 3 by single crystal X-ray diffraction techniques.     

Solvothermal synthesis and crystal structure of Sb(III) and Sb(V) thioantimonates: [Mn(en)3]2Sb2S5 and [Ni(en)3(Hen)]SbS4

Thioantimonate compounds of [Mn(en)₃]₂Sb₂S₅ (1) and [Ni(en)₃(Hen)]SbS₄ (2) (en=ethylenediamine) were prepared by reaction of transition metal chloride with Sb and S₈ powders under solvothermal conditions. Compound 1 consists of discrete [Sb₂S₅]⁴⁻ anion, which is formed by corner-sharing SbS₃ trigonal pyramids. Compound 2 is composed of discrete tetrahedral [SbS₄]³⁻ anion. The compounds 1 and 2 are charge compensated by [M(en)₃]²⁺ cations, whereas in the crystal of 2 there is another counter ion of [Hen]⁺. The results of the synthesis suggest that the temperature, the concentration and the existing states of the starting materials and so on are important for the structure and composition of the final products. In addition, the oxidation-state of antimony might be related to the molar ratio of the reactants. Excess amount of elemental S is beneficial to the higher oxidation-state of thioantimonate (V). Compound 1 decomposes from 150°C to 350°C, while compound 2 decomposes from 200°C to 350°C remaining Sb₂S₃ and NiSbS as residues.     

Tin(IV) complexes obtained by reacting 2-benzoylpyridine-derived thiosemicarbazones with SnCl4 and Ph2SnCl2

Reaction of 2-benzoylpyridine thiosemicarbazone (H2Bz4DH, HL1) and its N(4)-methyl (H2Bz4Me, HL2) and N(4)-phenyl (H2Bz4Ph, HL3) derivatives with SnCl₄ and diphenyltin dichloride (Ph₂SnCl₂) gave [Sn(L1)Cl₃] (1), [Sn(L1)PhCl₂] (2), [Sn(L2)Cl₃] (3), (4) [Sn(L3)PhCl₂] (5) and [Sn(L3)Ph₂Cl] (6). Infrared and ¹H, ¹³C and ¹¹⁹Sn NMR spectra of 1-3, 5 and 6 are compatible with the presence of an anionic ligand attached to the metal through the N_py-N-S chelating system and formation of hexacoordinated tin complexes. The crystal structures of 1-3, 5 and 6 show that the geometry around the metal is a distorted octahedron formed by the thiosemicarbazone and either chlorides or chlorides and phenyl groups. The crystal structure of 4 reveals the presence of and trans [Ph₂SnCl₄]²⁻.     

New organomercury(II) compounds containing intramolecular N → Hg interactions: crystal and molecular structure of [2-(Me2NCH2)C6H4]HgCl and [2-(Me2NCH2)C6H4]Hg[S(S)PPh2]

[2-(Me₂NCH₂)C₆H₄]HgCl (1) was prepared by reacting HgCl₂ with [2-(Me₂NCH₂)C₆H₄]Li in diethyl ether. The reactions of 1 with the sodium or ammonium salt of the appropriate thiophosphinato ligand, in 1:1 molar ratio, afford the isolation of [2-(Me₂NCH₂)C₆H₄]Hg[S(S)PR₂] [R=Me (2), Et (3), Ph (4)], [2-(Me₂NCH₂)C₆H₄]Hg[S(O)PPh₂] (5) and [2-(Me₂NCH₂)C₆H₄]Hg[S(S)P(OⁱPr)₂] (6). The compounds were investigated by IR and multinuclear NMR (¹H, ¹³C and ³¹P) spectroscopy. The molecular structures of 1 and 4 were determined by single-crystal X-ray diffraction. Due to the strong intramolecular coordination of the N atom of the pendant CH₂NMe₂ arm [Hg(1)-N(1) 2.764(6) and 2.725(4) Å in 1 and 4, respectively] both compounds exhibit a T-shaped (C,N)HgX core in the molecular unit, with almost linear arrangement of the covalent bonds [C(1)-Hg(1)-Cl(1) 176.93(18)° in 1, and C(1)-Hg(1)-S(1) 169.54(16)° in 4]. The crystals of 1 contain discrete monomeric molecules, while the crystals of 4 contain dimer associations built through asymmetric bridging dithiophosphinato ligands [Hg(1)-S(1) 2.3911(16) Å, Hg(1)?S(2a) 3.102(2) Å], thus resulting in an overall pseudo-trigonal bipyramidal (or seesaw) (C,N)HgS₂ core, with the nitrogen atom and the weekly bonded sulfur atom in equatorial positions [N(1)-Hg(1)?S(2a) 82.01(10)°].     

Electrochemical, EPR and computational results on [Fe2Cp2(CO)2]-based complexes with a bridging hydrocarbyl ligand

The dimetallacyclopentenone complexes [Fe₂Cp₂(CO)(μ−CO){μ−η¹:η³−C_αHC_β(R)C(O)}] (R = CH₂OH, 1a; R = CMe₂OH, 1b; R = Ph, 1c) were prepared by photolytic reaction of [Fe₂Cp₂(CO)₄] with alkyne according to the literature procedure. The X-ray and the electrochemical characterization of 1c are presented. The μ-allenyl compound [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β−C_αHC_βCMe₂][BF₄] ([2][BF₄]), obtained by reaction of 1b with HBF₄, underwent monoelectron reduction to give a radical species which was detected by EPR at room temperature. The EPR signal has been assigned to [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β-C_αHC_βCMe₂}], [2]^•. The molecular structures of [2]⁺ and [2]^• were optimized by DFT calculations. The unpaired electron in [2]^• is localized mainly at the metal centers and, coherently, [2]^• does not undergo carbon-carbon dimerization, by contrast with what previously observed for the μ-vinyl radical complex [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²-CHCH(Ph)}]^•, [3]^•. Electron spin density distributions similar to the one of [2]^• were found for the μ-allenyl radical complexes [Fe₂Cp₂(CO)₂(μ-CO){μ-η¹:η²_α,β-C_αHC_βC(R¹)(R²)}]^• (R¹ = R² = H, [4]^•; R¹ = H, R² = Ph, [5]^•; R¹ = R² = Ph, [6]^•).     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

Structural characterization of [Fe(NO)(mnt)2] salts

The iron dithiolene compounds [Fe₂(mnt)₄]²⁻ [1]²⁻ and [Fe(NO)(mnt)₂]ⁿ (n = 1−, [2]¹⁻; n = 2−, [2]²⁻) ([mnt]²⁻ = maleonitriledithiolate = [(NC)₂C₂S₂]²⁻) have been characterized structurally by X-ray diffraction as their [Et₄N]⁺ salts at 100 K. Dianion [2]²⁻ is prepared from [2]¹⁻ by reduction with Na[Et₃BH] and is observed to have a bent Fe-NO angle at 149.9(5)° in contrast to the linear configuration of Fe-NO in [2]¹⁻ (180.0°). The change from linear to bent binding mode for NO, an increase of more than 0.1 Å in the Fe-N bond length, and the relative invariance of the Fe-S distances for [2]²⁻ versus [2]¹⁻ indicate that the NO ligand is the site of reduction. The [Et₃NH]⁺ complex of [2]¹⁻ was also identified by crystallography and found to have hydrogen bonding contacts between [Et₃NH]⁺ and the cyano nitrogen atom of an [mnt]²⁻ ligand. Furthermore, relatively close S?S contacts (3.602-3.615 Å) occur between [2]¹⁻ anions, which pack together in an offset, head-to-head fashion. These S?S contacts are absent in the structure of [Et₄N][2]. Infrared spectra show an energy decrease for, and a significant broadening of, the NO bond stretching absorption peak in [2]²⁻, which is consistent with a bent NO ligand sampling a range of conformations both by facile pivoting about the Fe-N axis and by a breathing of the Fe-NO angle.     

Organoselenium(II) and selenium(IV) compounds containing 2-(Me2NCH2)C6H4 moieties: solution behavior and solid state structure

The cleavage of the Se-Se bond in [2-(Me₂NCH₂)C₆H₄]₂Se₂ (1) was achieved by treatment with SO₂Cl₂ (1:1 molar ratio) or elemental halogens to yield [2-(Me₂NCH₂)C₆H₄]SeX [X = Cl (2), Br (3), I (4)]. Oxidation of 1 with SO₂Cl₂ (1:3 molar ratio) gave [2-(Me₂NCH₂)C₆H₄]SeCl₃ (5). [2-(Me₂NCH₂)C₆H₄]SeS(S)CNR₂ [R = Me (6), Et (7)] were prepared by reacting [2-(Me₂NCH₂)C₆H₄]SeBr with Na[S₂CNR₂] · nH₂O (R = Me, n = 2; R = Et, n = 3). The reaction of 3 with K[(SPMe₂)(SPPh₂)N] resulted in isolation of [2-(Me₂NCH₂)C₆H₄]Se-S-PMe₂N-PPh₂S (8). The compounds were characterized by solution NMR spectroscopy (¹H, ¹³C, ³¹P, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 4-8 were established by single crystal X-ray diffraction. All compounds are monomeric, with the N atom of the pendant CH₂NMe₂ arm involved in a three-center-four-electron N?Se-X (X = halogen, S) bond. This results in a T-shaped coordination geometry for the Se(II) atom in 2, 4, 6-8. In 5, the Se(IV) atom achieves a square pyramidal coordination in the mononuclear unit. Loosely connected dimers are formed through intermolecular Se?Cl interactions (3.40 Å); the overall coordination geometry being distorted octahedral. In all compounds hydrogen bonds involving halide or sulfur atoms generate supramolecular associations in crystals.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

X-ray crystal structures and solution dynamics of sodium organofluorotitanates [Na{Ti2(C5Me5)2F7}] and [NaTi6(C5Me5)5F20(H2O)]·(THF)

[Na{Ti₂(C₅Me₅)₂F₇}] (1) was prepared from sodium fluoride and [{Ti(C₅Me₅)F₃}₂] [H.W. Roesky, et al., Angew. Chem. Int. Ed. Engl. 31 (1992) 864-866]. The solid-state 1 consists of a polymeric chain of two rows of dititanate anions [Ti₂(C₅Me₅)₂F₇]⁻ connected by sodium ions in the middle of the chain. Each sodium ion is coordinated by five fluorine atoms from three [Ti₂(C₅Me₅)₂F₇]⁻ anions. The variable-temperature ¹⁹F NMR of CD₃CN solution of 1 revealed interconversions of monomeric species [Na(CD₃CN)_n{Ti₂(C₅Me₅)₂F₇}] (1solv) with different number of CD₃CN ligands on the sodium ion. The addition of HMPA to the CD₃CN solution of 1 allows ¹⁹F NMR observation of 1·HMPA (1a) and 1·HMPA·CD₃CN (1b) in the slow exchange. The solid-state structure of [NaTi₆(C₅Me₅)₅F₂₀(H₂O)]·(THF) (2·THF) reveals the sodium ion coordinated by four fluorine atoms from the anion [Ti₂(C₅Me₅)₂F₇]⁻ and by three fluorine atoms from the cluster [Ti₄(C₅Me₅)₃F₁₃(H₂O)].     

Syntheses of platinum(II) complexes of cyclo-octenyl group and isolation of a self-assembled oxo-bridged macrocyclic complex [Pt4(Spy)4(C8H12-O-C8H12)2]

Reactions of [Pt₂(μ-Cl)₂(C₈H₁₂OMe)₂] (1) (C₈H₁₂OMe = 8-methoxy-cyclooct-4-ene-1-yl) with various anionic chalcogenolate ligands have been investigated. The reaction of 1 with Pb(Spy)₂ (HSpy = pyridine-2-thiol) yielded a binuclear complex [Pt₂(Spy)₂(C₈H₁₂OMe)₂] (2). A trinuclear complex [Pt₃(Spy)₄(C₈H₁₂OMe)₂] (3) was isolated by a reaction between 2 and [Pt(Spy)₂]_n. The reaction of 1 with HSpy in the presence of NaOMe generated 2 and its demethylated oxo-bridged tetranuclear complex [Pt₄(Spy)₄(C₈H₁₂-O-C₈H₁₂)₂] (4). Treatment of 1 with ammonium diisopropyldithiophosphate completely replaced C₈H₁₂OMe resulting in [Pt(S₂P{OPrⁱ}₂)₂] (5), whereas non-rigid 5-membered chelating ligand, Me₂NCH₂CH₂E⁻, produced mononuclear complexes [Pt(ECH₂CH₂NMe₂)(C₈H₁₂OMe)] (E = S (6), Se (7)). These complexes have been characterized by elemental analyses, NMR (¹H, ¹³C{¹H}, ¹⁹⁵Pt{¹H}) and absorption spectroscopy. Molecular structures of 2, 3, 4, 5 and 7 were established by single crystal X-ray diffraction analyses. Thermolysis of 2, 6 and 7 in HDA gave platinum nanoparticles.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Syntheses and X-ray crystallographic studies of {[Ni(en)2(pot)2]0.5CHCl3} and [Ni(en)2](3-pytol)2

Two novel Ni(II) complexes {[Ni(en)₂(pot)₂]0.5CHCl₃} (3) {pot = 5-phenyl-1,3,4-oxadiazole-2-thione} (1) and [Ni(en)₂](3-pytol)₂ (4) {3-pytol = 5-(3-pyridyl)-1,3,4-oxadiazole-2-thiol} (2) have been synthesized using en as coligand. The metal complexes have been characterized by physical and analytical techniques and also by single crystal X-ray studies. The complexes 3 and 4 crystallize in monoclinic system with space group P21/a and P121/c, respectively. The complex 3 has a slightly distorted octahedral geometry with trans (pot)⁻ ligands while 4 has a square planar geometry around the centrosymmetric Ni(II) center with ionically linked trans (3-pytol)⁻ ligands. The π?π (face to face) interaction plays an important role along with hydrogen bondings to form supramolecular architecture in both complexes.     

Synthesis and ethylene polymerization behavior of {MeB(3-Ph-pyrazolyl)3}TiCl3

The new methyl-tris(pyrazolyl)borate reagents Li[MeTp^Ph] (1) [MeTp^Ph]⁻ = MeB(3-Ph-pyrazolyl)₃⁻) and Tl[MeTp^Ph] (2) react with TiCl₄ to afford (MeTp^Ph)TiCl₃ (3) in 77% and 81% yield respectively. 2 reacts with ZrCl₄ and HfCl₄ to yield mixtures of products. The reaction of 1 with TiCl₃(THF)₃ proceeds with B-N bond cleavage to afford TiCl₃(3-Ph-pyrazole)(THF)₂ as the major product (30%). The reaction of 3 with MeLi (3 equiv) yields 1 (60%) and reduced Ti species, via apparent displacement of [MeTp^Ph]⁻ and generation of unstable TiCl₄Me_4−x species. Under MAO activation conditions (MAO = methylalumoxane), 3 polymerizes ethylene to linear polyethylene. 3/MAO is significantly more active in ethylene polymerization than the hydrido-tris(pyrazolyl)borate analogue {HB(3-Ph-pyrazolyl)₃}TiCl₃/MAO.     

Synthesis and characterization of mercury(II) complexes with 2-styryl-1,3-benzothiazole (sb). Presence of two differently coordinated Hg(II) ions in the dinuclear complex Hg2Cl4(sb)3. Structural characterization of 2-styryl-1,3-benzothiazole and some of its derivatives

The molecular and crystal structures of the following compounds 2-styryl-1,3-benzothiazole, sb, (1), Hg₂Cl₄(sb)₃ (2), 1,3-bis(1,3-benzothiazol-2-yl)-2,4-diphenylcyclobutane (3) 1,3-bis(1,3-benzothiazol-2-yl)-2,4-bis(4-chlorophenyl)cyclobutane (4) and HgBr₂(sb)₂ (5) were determined by single-crystal X-ray diffractometry. The crystal structure of 1 consists of discrete sb molecules which are essentially planar. The dimeric molecules of 3 and 4 are characterized by a cyclobutane ring. In both isolated complexes 2 and 5, sb acts as a neutral monodentate ligand coordinated to the mercury atom through the thiazolyl nitrogen atom. The dinuclear complex 2 is characterized by the unique example of two differently coordinated Hg(II) ions bridged via a non-symmetrical linear Cl⁻ bridge. The first one is coordinated by one terminal and one bridging Cl⁻ ion and two thiazolyl nitrogen atoms in the form of distorted tetrahedron. The second one is bonded to two terminal Cl⁻ ions and the bridging Cl⁻ ion and one thiazolyl nitrogen atom in a 2+2 manner. In complex 5 the Hg(II) ion, which is situated on a crystallographic twofold axis, is tetrahedrally coordinated by two Br⁻ ions and two thiazolyl nitrogen atoms. Both complexes are characterized by stronger mercury-to-halide covalent bonds than mercury-to-nitrogen bonds, which are regarded as contacts shorter than the van der Waals radii sum of the corresponding atoms. The geometry of the sb ligand in both complexes 2 and 5 has not been changed remarkably from that one in the uncoordinated state due to not so strong bonds formation with the Hg(II) ion.     

Reactivity of [Re2(CO)8(MeCN)2] with thiazoles: Hydrido bridged dirhenium compounds bearing thiazoles in different coordination modes

Reactions of the labile compound [Re₂(CO)₈(MeCN)₂] with thiazole and 4-methylthiazole in refluxing benzene afforded the new compounds [Re₂(CO)₇{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}(μ-H)] (1, R = H; 2, R = CH₃), [Re₂(CO)₆{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}₂(μ-H)] (3, R = H; 4, R = CH₃) and fac-[Re(CO)₃(Cl){η¹-NC₃H₂(4-R)S}₂] (5, R = H; 6, R = CH₃). Compounds 1 and 2 contain two rhenium atoms, one bridging thiazolide ligand, coordinated through the C(2) and N atoms and a η¹-thiazole ligand coordinated through the nitrogen atom to the same Re as the thiazolide nitrogen. Compounds 3 and 4 contain a Re₂(CO)₆ group with one bridging thiazolide ligand coordinated through the C(2) and N atoms and two N-coordinated η¹-thiazole ligands, each coordinated to one Re atom. A hydride ligand, formed by oxidative-addition of C(2)-H bond of the ligand, bridges Re-Re bond opposite the thiazolide ligand in compounds 1-4. Compound 5 contains a single rhenium atom with three carbonyl ligands, two N-coordinated η¹-thiazole ligands and a terminal Cl ligand. Treatment of both 1 and 2 with 5 equiv. of thiazole and 4-methylthiazole in the presence of Me₃NO in refluxing benzene afforded 3 and 4, respectively. Further activation of the coordinated η¹-thiazole ligands in 1-4 is, however, unsuccessful and results only nonspecific decomposition. The single-crystal XRD structures of 1-5 are reported.     

Synthesis of mono- and binuclear dioxomolybdenum(VI) complexes derived from N(4)-substituted thiosemicarbazones: X-ray crystal structures of [(MoO2L)2], [MoO2Lpy] and [MoO2Lpy]

Four molybdenum(VI) thiosemicarbazonato complexes have been synthesized and characterized. The dinuclear complexes [(MoO₂L¹)₂] (1) and [(MoO₂L²)₂] (3) have been prepared by the reaction of [MoO₂(acac)₂] with 2-hydroxyacetophenone N(4)-cyclohexyl (H₂L¹) and N(4)-phenyl (H₂L²) thiosemicarbazones in alcoholic medium. Mononuclear dioxomolybdenum(VI) complexes of the type [MoO₂L¹py] (2) and [MoO₂L²py] (4) have been prepared by the reaction of 1 or 3 with pyridine (py) in alcoholic medium. In all the complexes, molybdenum is coordinated by two terminal oxo-oxygen atoms, (O_t), oxygen, nitrogen and sulfur atoms from the principal ligand and by an oxygen atom from the second unit in 1, and by a nitrogen atom from pyridine in complexes 2 and 4. All complexes have been spectroscopically characterized. The molecular structures of complexes 1, 2 and 4 have been determined by the single crystal X-ray diffraction method.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Solvothermal syntheses, and characterization of [Ln(en)4(SbSe4)] (Ln=Ce, Pr) and [Ln(en)4]SbSe4·0.5en (Ln=Eu, Gd, Er, Tm, Yb): The effect of lanthanide contraction on the crystal structures of lanthanide selenidoantimonates(V)

Two types of lanthanide selenidoantimonates [Ln(en)₄(SbSe₄)] (Ln=Ce(1a), Pr(1b)) and [Ln(en)₄]SbSe₄·0.5en (Ln=Eu(2a), Gd(2b), Er(2c), Tm(2d), Yb(2e); en=ethylenediamine) were solvothermally synthesized by reactions of LnCl₃, Sb and Se with the stoichiometric ratio in en solvent at 140 °C. The four-en coordinated lanthanide complex cation [Ln(en)₄]³⁺ formed in situ balances the charge of SbSe₄³⁻ anion. In compounds 1a and 1b, the SbSe₄³⁻ anion act as a monodentate ligand to coordinate complex [Ln(en)₄]³⁺ and the neutral compound [Ln(en)₄(SbSe₄)] is formed. The Ln³⁺ ion has a nine-coordinated environment involving eight N atoms and one Se atom forming a distorted monocapped square antiprism. In 2a-2e the lanthanide(III) ion exists as isolated complex [Ln(en)₄]³⁺, in which the Ln³⁺ ion is in a bicapped trigonal prism geometry. A systematic investigation of the crystal structures reveals that two types of structural features of these lanthanide selenidoantimonates are related with lanthanides contraction across the lanthanide series. TG curves show that compounds 1a-1b and 2a-2e remove their organic components in one and two steps, respectively.