Synthesis, photophysical and electrophosphorescent properties of mononuclear Pt(II) complexes with arylamine functionalized cyclometalating ligands

Four cyclometalated Pt(II) complexes, i.e., [(L²)PtCl] (1b), [(L³)PtCl] (1c), [(L²)PtCCC₆H₅] (2b) and [(L³)PtCCC₆H₅] (2c) (HL² = 4-[p-(N-butyl-N-phenyl)anilino]-6-phenyl-2,2′-bipyridine and HL³ = 4-[p-(N,N′-dibutyl-N′-phenyl)phenylene-diamino]-phenyl-6-phenyl-2,2′-bipyridine), have been synthesized and verified by ¹H NMR, ¹³C NMR and X-ray crystallography. Unlike previously reported complexes [(L¹)PtCl] (1a) and [(L¹)PtCCC₆H₅] (2a) (HL¹ = 4,6-diphenyl-2,2′-bipyridine), intense and continuous absorption bands in the region of 300-500 nm with strong metal-to-ligand charge transfer (¹MLCT) (dπ(Pt) → π^∗(L)) transitions (ε ∼ 2 × 10⁴ dm³ mol⁻¹ cm⁻¹) at 449-467 nm were observed in the UV-Vis absorption spectra of complexes 1b, 1c, 2b and 2c. Meanwhile, with the introduction of electron-donating arylamino groups in the ligands of 1a and 2a, complexes 1b and 2b display stronger phosphorescence in CH₂Cl₂ solutions at room temperature with bathochromically shifted emission maxima at 595 and 600 nm, relatively higher quantum yields of 0.11 and 0.26, and much longer lifetimes of 8.4 and 4.5 μs, respectively. An electrochromic film of 1b-based polymer was obtained on Pt or ITO electrode surface, which suggests an efficient oxidative polymerization behavior. An orange multilayer organic light-emitting diode with 1b as phosphorescent dopant was fabricated, achieving a maximum current efficiency of 11.3 cd A⁻¹ and a maximum external efficiency of 5.7%. The luminescent properties of complexes 1c and 2c are dependent on pH value and solvent polarity, which is attributed to the protonation of arylamino units in the C^N^N cyclometalating ligands.     

Acid/base sensitive platinum terpyridyl complex: Switching between metal-to-ligand charge transfer (MLCT), ligand-to-ligand charge transfer (LLCT), and intraligand charge transfer (ILCT) states

A platinum(II) 2,2′:6′,2″-terpyridyl complex (2) with a hydroxylphenyl substituent on the terpyridyl ligand and a dimethylamino substituent on the phenylacetylide ligand was synthesized and characterized. Complex 2 exhibits a metal-to-ligand charge transfer (¹MLCT) absorption band at ca. 410 nm and a ligand-to-ligand charge transfer (¹LLCT) band at ca. 536 nm. It exhibits dual emission at ca. 450 nm and ca. 560 nm at room temperature when excited at 334 nm, which originates from the ¹π,π* state and the ³MLCT/³π,π* state, respectively. Dramatic color change was observed for 2 with addition of acid and base. Its emission at 560 nm was enhanced in acidic solution and quenched in basic solution. The changes in absorption and emission could be attributed to the variation of the nature of the lowest excited state from LLCT to MLCT in acidic solution and to LLCT/ILCT at basic solution. The drastic color and emission intensity changes in acidic and basic solutions suggest that 2 could potentially be a colorimetric and luminescent acid/base sensor.     

Electronic structures and optical properties of neutral substituted fluorene-based cyclometalated platinum(II)-acetylide complexes: A DFT exploration

We report a combinational DFT and TD-DFT study of the electronic and optical properties of several tridentate cyclometalated mononuclear [Pt(C^N^N)(CCR)] (1-3), [Pt(C^N^N)(CCRCCH)] (4), and dinuclear [Pt(C^N^N)(CCRCC)Pt(C^N^N)] (5 (C₂ symmetry) and 5′ (C_s symmetry)) platinum(II) complexes with σ-acetylide ligand bearing fluorene substituents, where HC^N^N = 6-aryl-2,2′-bipyridine, R = fluorene-2,7-diyl 1, 4, 5 and 5′, R = 9,9-dimethylfluorene-2,7-diyl 2, R = 9,9-diethylfluorene-2,7-diyl 3. The structural and electronic properties of the ground- and lowest triplet state and the EA and IP values of the complexes are discussed. It is found that all of the lowest-lying absorptions are categorized as the LLCT combined with the MLCT transitions. The oscillator strengths of the lowest energy absorptions get a remarkable enhancement for the dinuclear complexes 5 and 5′compared to 1-4 due to the increase of electronic delocalization on the more planar molecular geometry. In general, the phosphorescent emissions of these complexes in CH₂Cl₂ are the reverse process of their lowest energy absorption transitions, except that of 4 is assigned as ³[π∗−π]/³MLCT transition because of the strengthened electronic localization effect and the interaction with the solvent in the lowest triplet state. In addition, these complexes hold promise as a new kind of nonlinear optical material owing to their large static first hyperpolarizabilities (β₀). The β₀ value has increased in the dinuclear complexes in contrast to those of the mononuclear ones owing to their larger transition moment and smaller transition energy.     

Synthesis, photophysical properties, and theoretical studies on pyrrole-containing bromo Re(I) complex

Two bromo rhenium(I) carbonyl complexes with the formula of [Re(CO)₃(L)Br], where L = 1,10-phenanthroline (Phen-Re) and 5-(1H-pyrrol-1-yl)-1,10-phenanthroline (Pyph-Re), were successfully synthesized with the aim to analyze the effect of the pyrrole (Py) moiety on the photophysical properties of Pyph-Re. It was found that the triplet metal-to-ligand charge-transfer dπ (Re) → π*(N-N) emission of Phen-Re and Pyph-Re centered at ca. 527 nm with the luminescence quantum yield (LQY) of 0.015 and ca. 578 nm with the LQY of 0.011, respectively. At the same time, the geometrical structures of the ground state and the absorption spectral properties of Phen-Re and Pyph-Re were also calculated with the 6-31G* basis set employed on C, H, N, O, and Br atoms, and LANL2DZ adopted on Re atom. According to the experimental and theoretical analysis, the red-shift of the photoluminescent spectrum and the lower LQY of Pyph-Re should be mainly attributed to the narrower energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital and the more LLCT transition ration of Pyph-Re, respectively.     

Thioxanthone based water-soluble photoinitiators for acrylamide photopolymerization

The two water-soluble thioxanthone-based 2-(carboxymethoxy) thioxanthone, 1A and 2-thioxanthone-thioacetic acid sodium salts, 2A were synthesized and characterized by spectroscopic methods. The quantum yield for fluorescence emission (φ_f) in water was found to be 0.50 for 1A and 0.05 for 2A. The long phosphorescence lifetime, that is 201 and 114 ms in a matrix at 77 K for 1A and 2A, respectively, indicates a π-π∗ nature of the lowest triplet state. The triplet lifetimes were determined by laser flash photolysis as 12 and 12.6 μs for 1A and 2A. Polymerization of acrylamide (AAm) was initiated by both initiators in water. Decarboxylation of initiators was achieved during 20 min of irradiation. It was found that 2A initiated polymerization of AAm in water more efficiently than 1A.     

A novel series of iridium complexes with alkenylquinoline ligands: Theoretical study on electronic structure and spectroscopic property

The ground and the lowest-lying triplet excited state geometries, electronic structures, and spectroscopic properties of a novel series of neutral iridium(III) complexes with cyclometalated alkenylquinoline ligands [(C^N)₂Ir(acac)] (acac = acetoylacetonate; C^N = 2-[(E)-2-phenyl-1-ethenyl]pyridine (pep) 1; 2-[(E)-2-phenyl-1-ethenyl]quinoline (peq) 2; 1-[(E)-2-phenyl-1-ethenyl]isoquinoline (peiq) 3; 2-[(E)-1-propenyl]pyridine (pp) 4; 2-[(E)-1-fluoro-1-ethenyl]pyridine (fpp) 5) were investigated by DFT and CIS methods. The highest occupied molecular orbital is composed of d(Ir) and π(C^N) orbital, while the lowest unoccupied molecular orbital is dominantly localized on C^N ligand. Under the TD-DFT with PCM model level, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized ground and triplet excited state geometries, respectively. The calculated lowest-lying absorptions at 437 nm (1), 481 nm (2), 487 nm (3), 422 nm (4), and 389 nm (5) are attributed to a {[d_x²-y²(Ir) + d_xz(Ir) + π(C^N)] → [π∗(C^N)]} transition with metal-to-ligand/intra-ligand charge transfer (MLCT/ILCT) characters, and the calculated phosphorescence at 582 nm (1), 607 nm (2), 634 nm (3), 515 nm (4), and 491 nm (5) can be described as originating from the ³{[d_x²-y²(Ir) + d_xz(Ir) + π (C^N)] [π∗(C^N)]} excited state with the ³MLCT/³ILCT characters. The calculated results revealed that the phosphorescent color of these new Ir(III) complexes can be tuned by changing the π-conjugation effect strength of the C^N ligand.     

Synthesis and characterization of aluminum complexes of 2-pyrazol-1-yl-ethenolate ligands

The synthesis and the characterization of some new aluminum complexes with bidentate 2-pyrazol-1-yl-ethenolate ligands are described. 2-(3,5-Disubstituted pyrazol-1-yl)-1-phenylethanones, 1-PhC(O)CH₂-3,5-R₂C₃HN₂ (1a, R = Me; 1b, R = Bu^t), were prepared by solventless reaction of 3,5-dimethyl pyrazole or 3,5-di-tert-butyl pyrazole with PhC(O)CH₂Br. Reaction of 1a or 1b with (R¹ = Me, Et) yielded N,O-chelate alkylaluminum complexes (2a, R = R¹ = Me; 2b, R = Bu^t, R¹ = Me; 2c, R = Me, R¹ = Et). Compound 1a was readily lithiated with LiBuⁿ in thf or toluene to give lithiated species 3. Treatment of 3 with 0.5 equiv of MeAlCl₂ or AlCl₃ yielded five-coordinated aluminum complexes [XAl(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₂] (4, X = Me; 5, X = Cl). Reaction of 5 with an equiv of LiHBEt₃ generated [Al(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₃] (6). Complex 6 was also obtained by reaction of 3 with 1/3 equiv of AlCl₃. Treatment of 5 with 2 equiv of AlMe₃ yielded complex 2a, whereas with an equiv of AlMe₃ afforded a mixture of 2a and [Me(Cl)AlOC(Ph)CH{(3,5-Me₂C₃HN₂)-1}] (7). Compounds 1a, 1b, 2a-2c and 4-6 were characterized by elemental analyses, NMR and IR (for 1a and 1b) spectroscopy. The structures of complexes 2a and 5 were determined by single crystal X-ray diffraction techniques. Both 2a and 5 are monomeric in the solid state. The coordination geometries of the aluminum atoms are a distorted tetrahedron for 2a or a distorted trigonal bipyramid for 5.     

Synthesis and characterization of some new mononuclear ruthenium complexes containing 4-(un)substituted dipyridylpyrazole ligands

A mononuclear ruthenium complex [Ru(bpy)₂(bpp)](PF₆) (1) and its halogenated and nitro derivatives [Ru(bpy)₂(Xbpp)](PF₆) (bpy = 2,2′-bipyridine; bpp = 3,5-bis(2-pyridyl)pyrazole; X = Cl, 2; X = Br, 3; X = I, 4; X = NO₂, 5) have been synthesized and characterized by ¹H NMR, ¹³C NMR, HRMS, elemental analysis. Complexes 2–5 have been further confirmed by X-ray diffraction. Their UV–Vis and emission spectroscopies, electrochemical measurements and acid–base properties are described. The results presented here reveal that the introduction of Cl, Br, I and NO₂ groups to the coordinated bpp⁻ ligand makes the absorption and emission maxima of the parent complex 1 blue-shifted, the oxidation potential of the Ru^II/Ru^III couple increased and the pK_a value decreased obviously. In addition, significant quenching of the emission by these groups is also observed.     

Electronically variable imino-phenanthrolinyl-cobalt complexes; synthesis, structures and ethylene oligomerisation studies

The 2-imino-1,10-phenanthroline ligands, 1,10-C₁₂H₇N₂-2-CRN(2,6-i-Pr₂-4-R¹-C₆H₂) [R = R¹ = H (L1); R = H, R¹ = Br (L2); R = H, R¹ = CN (L3); R = H, R¹ = i-Pr (L4); R = Me, R¹ = H (L5); R = Me, R¹ = i-Pr (L6)], have been prepared in high yield from the condensation reaction of 1,10-C₁₂H₇N₂-2-CRO (R = H, Me) with one equivalent of the corresponding 4-substituted 2,6-diisopropylaniline. The molecular structures of L2, L5 and L6 reveal the imino nitrogen atoms to adopt a transoid configuration with respect to the phenanthrolinyl nitrogen atoms. Treatment of Lx with one equivalent of CoCl₂ in n-BuOH at 90 °C gives the high spin complexes, (Lx)CoCl₂ [Lx = L1 (1a), L2 (1b), L3 (1c), L4 (1d), L5 (1e), L6 (1f)], in which the metal centres exhibit distorted square pyramidal geometries. Activation of 1a-1f with excess methylaluminoxane (MAO) gives catalysts that are modestly active for the oligomerisation of ethylene affording mainly linear α-olefins along with some degree of internal olefins. While the donor capability of the 4-position of the N-aryl group does not appear to affect the activity of the catalyst, it does have an influence on the ratio of α-olefins to internal olefins. Single crystal X-ray diffraction studies have been performed on L2, L5, L6, 1a, 1c and 1f.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Theoretical studies on structures and spectroscopic properties of bis-cyclometalated iridium complexes [Ir(ppy)2X2]

The electronic structures and spectroscopic properties of a series of mixed bis-cyclometalated iridium(III) complexes [Ir(ppy)₂X₂]⁻ (X = CN, 1; X = NCS, 2; X = NCO, 3; ppy = 2-phenylpyridl) were investigated at the B3LYP/LANL2DZ and CIS/LANL2DZ levels. The calculated geometry parameters in the ground state are well consistent with the corresponding experimental values. The HOMO of 1 is dominantly localized on Ir atom and ppy ligand, but the HOMO of 2 and 3 have significant X ligand composition. Under the TD-DFT level with PCM model, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized geometries in the ground and excited states, respectively. The lowest-lying absorption of 1 at 403 nm is attributed to {[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)]→[π^∗(ppy)]} transition with metal-to-ligand and intraligand charge transfer (MLCT/ILCT) transition characters, whereas those of 2 (449 nm) and 3 (475 nm) are related to {[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)+π(NCS/NCO)]→[π^∗(ppy)]} transition with MLCT/ILCT and ligand-to-ligand charge transfer (LLCT) transition characters. The phosphorescence of 1 at 466 nm can be described as originating from ³{[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)][π^∗(ppy)]} excited state, while those of 2 (487 nm) and 3 (516 nm) originate from ³{[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)+π(NCS/NCO)][π^∗(ppy)]} excited states. The calculated results showed that the transition character of the absorption and emission can be changed by adjusting the π electron-accepting abilities of the X ligands and the phosphorescent color can be tuned by altering the X ligands.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Investigation on coordination modes of organotin(IV) complexes with 6-thiopurine and related ligands

The organotin(IV) complexes R₂Sn(tpu)₂ · L [L = 2MeOH, R = Me (1); L = 0: R = n-Bu (2), Ph (3), PhCH₂ (4)], R₃Sn(Hthpu) [R = Me (5), n-Bu (6), Ph (7), PhCH₂ (8)] and (R₂SnCl)₂ (dtpu) · L [L = H₂O, R = Me (9); L = 0: R = n-Bu (10), Ph (11), PhCH₂ (12)] have been synthesized, where tpu, Hthpu and dtpu are the anions of 6-thiopurine (Htpu), 2-thio-6-hydroxypurine (H₂thpu) and 2,6-dithiopurine (H₂dtpu), respectively. All the complexes 1-12 have been characterized by elemental, IR, ¹H, ¹³C and ¹¹⁹Sn NMR spectra analyses. And complexes 1, 2, 7 and 9 have also been determined by X-ray crystallography, complexes 1 and 2 are both six-coordinated with R₂Sn coordinated to the thiol/thione S and heterocyclic N atoms but the coordination modes differed. As for complex 7 and 9, the geometries of Sn atoms are distorted trigonal bipyramidal. Moreover, the packing of complexes 1, 2, 7 and 9 are stabilized by the hydrogen bonding and weak interactions.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Nickel (II) complexes bearing 2-ethylcarboxylate-6-iminopyridyl ligands: synthesis, structures and their catalytic behavior for ethylene oligomerization and polymerization

A series of nickel (II) complexes (L)NiCl₂ (7-9) and (L)NiBr₂ (10-12) were prepared by the reactions of the corresponding 2-carboxylate-6-iminopyridine ligands 1-6 with NiCl₂ · 6H₂O or (DME)NiBr₂ (DME = 1,2-dimethoxyethane), respectively. All the complexes were characterized by IR spectroscopy and elemental analysis. Solid-state structures of 7, 8, 10, 11 and 12 were determined by X-ray diffraction. In the cases of 7, 8 and 10, the ligands chelate with the nickel centers in tridentate fashion in which the carbonyl oxygen atoms coordinate with the metal centers, while the carbonyl oxygen atoms are free from coordinating with the nickel centers in 11 and 12. Upon activation with methylaluminoxane (MAO), these complexes are active for ethylene oligomerization (up to 7.97 × 10⁵ g mol⁻¹ (Ni) h⁻¹ for 11 with 2 equivalents of PPh₃ as auxiliary ligand) and/or polymerization (1.37 × 10⁴ g mol⁻¹ (Ni) h⁻¹ for 9). The ethylene oligomerization activities of 7-12 were significantly improved in the presence of PPh₃ as auxiliary ligands. The effects of the coordination environment and reaction conditions on the ethylene catalytic behaviors have been discussed.     

Cation-anion interactions involving hydrogen bonds: Syntheses and crystal structures study of hexafluorotitanate(IV) salts with pyridine and methyl substituted pyridines

Fluorotitanates (LH)₂[TiF₆]·nH₂O (1: R = pyridine, n = 1, 2: R = 2-picoline, n = 2, 3: R = 2,6-lutidine, n = 0, 4: R = 2,4,6-collidine, n = 0) and (LH)[TiF₅(H₂O)] (3a: L = 2,6-lutidine) have been synthesized by the reaction of pyridine or corresponding methyl substituted pyridines and titanium dioxide dissolved in hydrofluoric acid. The crystal structures of ionic compounds 1, 2, 3, 3a and 4 have been determined by single-crystal X-ray diffraction analysis. The hydrogen bonding led to the formation of discrete (LH)₂[TiF₆] units (4), chains (1-3), and layers (3a). The additional π-π interactions present in 1, 2, and 4 results in chain structures of 1 and 4 and in a layer structure of 2. The [TiF₆]²⁻ and [TiF₅(H₂O)]⁻ anions were observed by ¹⁹F NMR spectroscopy in aqueous solutions of 1, 2, 3, 3a and 4.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Heavy analogues of the 6π-electron anionic ring systems: Cyclopentadienide ion and cyclobutadiene dianion

The heavy analogues of the anionic 6π-electron systems, lithium 1,2-disila-3-germacyclopentadienide 2⁻ · [Li⁺(thf)], 1,2-disila-3,4-digerma- and 1,2,3,4-tetrasilacyclobutadiene dianions 7²⁻ · 2[K⁺(thf)₂] and 8²⁻ · 2[K⁺(thf)₂], were synthesized by the reduction of the neutral precursors 1, 3 and 4, respectively. 2⁻ · [Li⁺(thf)], the heavy analogue of the cyclopentadienide ion, is an aromatic compound, whereas 7²⁻ · 2[K⁺(thf)₂] and 8²⁻ · 2[K⁺(thf)₂], the heavy analogues of the cyclobutadiene dianion, are both non-aromatic.     

Dinitrogen extrusion from diazidophenylborane: Computational analysis of PhBNx (x = 6, 4, 2) isomers

The energies and structures of possible intermediates in the dinitrogen extrusion from diazidophenylborane 4a to give phenylborylene 11a were determined using density functional (B3LYP), multiconfigurational (CASSCF and MRMP2), and coupled cluster (CCSD(T)) computations in conjunction with basis sets of up to cc-pVTZ quality. Formation of 11a and nitrogen from 4a is an exothermic process (−21 kcal mol⁻¹). The triplet electronic ground state of azidophenylborylnitrene 5a (PhBN₄) is only 26 kcal mol⁻¹ higher in energy than 4a and the phenyl shift in 5a to yield N-azidophenyliminoborane 7a is highly exothermic.