Formation of a four-electron donor carbonyl group in the decarbonylation of the unsaturated H2C2Fe2(CO)6 tetrahedrane as an alternative to an iron-iron triple bond

The unsaturated Fe₂C₂ tetrahedrane derivatives R₂C₂Fe₂(CO)₆ (R = Ph, ^tBu) are among the many products obtained from reactions of the alkynes RCCR with iron carbonyls. In this connection theoretical studies have been performed on the simplest such compounds H₂C₂Fe₂(CO)_n (n = 6, 5) for comparison with the experimentally known structure of the t-butyl derivative t-Bu₂C₂Fe₂(CO)₆ and in order to predict the decarbonylation pathways for such (alkyne)Fe₂(CO)₆ derivatives. These theoretical studies predict an Fe₂C₂ tetrahedrane structure for H₂C₂Fe₂(CO)₆ with a formal FeFe double bond very similar to the experimental structure for t-Bu₂C₂Fe₂(CO)₆. Decarbonylation of H₂C₂Fe₂(CO)₆ is predicted to give an H₂C₂Fe₂(CO)₅ isomer retaining the Fe₂C₂ tetrahedrane structure, with an FeFe double bond but with the unprecedented feature of a four-electron donor bridging carbonyl group in an M₂C₂ tetrahedrane structure. The formation of formal FeFe triple bonds appears to be avoided in even the higher energy H₂C₂Fe₂(CO)₅ structures. These include three triplet Fe₂C₂ tetrahedrane structures with formal FeFe double bonds as well as a coordinately unsaturated singlet structure, still with an FeFe double bond.     

Backbone modified small bite-angle diphosphines: Synthesis and molecular structures of [M(CO)4{X2PC(RR)PX2}] (M = Mo, W; X = Ph, Cy; R = H, Me, Et, Pr, allyl, R = Me, allyl)

A range of new small bite-angle diphosphine complexes, [M(CO)₄{X₂PC(R¹R²)PX₂}] (M = Mo, W; X = Ph, Cy; R¹ = H, Me, Et, Pr, allyl, R² = Me, allyl), have been prepared via elaboration of the methylene backbones in [M(CO)₄(X₂PCH₂PX₂)] as a result of successive deprotonation and alkyl halide addition. When X = Ph it proved possible to replace both methylene protons but for X = Cy only one substitution proved possible. This is likely due to the electron-releasing nature of the cyclohexyl groups but may also be due to steric constraints. Attempts to prepare the bis(allyl) substituted complex [Mo(CO)₄{Ph₂PC(allyl)₂PPh₂}] were only moderately successful. The crystal structures of nine of these complexes are presented.     

Unsaturation in trinuclear cobalt carbonyl compounds of the type ECo3(CO)n (E = CH,CF, P,As; n = 9, 8, 7, 6) with Co3E tetrahedrane structures

Theoretical studies on the known trinuclear cobalt carbonyl derivatives ECo₃(CO)₉ (E = CH, CF, P, As) predict structures with carbonyl groups bridging each edge of the Co₃ triangle in contrast with experiment where structures with all terminal carbonyl groups are found in all cases. However, the energy differences are predicted to be rather small ranging from 4 ± 2 kcal/mol for FCCo₃(CO)₉ to 10 ± 3 kcal/mol for AsCo₃(CO)₉. The global minima for the unsaturated ECo₃(CO)_n (n = 8, 7, 6) derivatives generally have two (for n = 8) or three (for n = 7 and 6) carbonyl groups bridging the edges of the Co₃ triangle. However, structures with all terminal carbonyl groups are also found in all cases as well as higher energy structures in which one of the carbonyl groups bridges all three cobalt atoms. The fluoromethinyl derivatives FCCo₃(CO)_n (n = 9, 8, 7) are anomalous since their unbridged structures or structures with a carbonyl group bridging all three cobalt atoms are closer in energy to the doubly or triply bridged global minima than is the case for the other ECo₃(CO)_n derivatives.     

New effective reagent [Cp2ZrH2 · ClAlEt2]2 for alkene hydrometallation

New bimetallic complex [Cp₂ZrH₂ · ClAlEt₂]₂ (1) was synthesized, and its reactivity in hydrometallation reaction with the following alkenes was studied: hept-1-ene, okt-1-ene, α-methylstyrene, (1S)-β-pinene, (+)-camphene. Complex 1 shows the highest reactivity among the other known Al,Zr-bimetallic complexes: [Cp₂ZrH₂ · ClAlBuⁱ₂]₂ (2), [Cp₂ZrH₂ · AlEt₃]₂ (3), [Cp₂ZrH₂ · AlBuⁱ₃]₂ (4) and [Cp₂ZrH₂ · HAlBuⁱ₂] (5) as well as organoaluminium compounds (OAC): ⁱBu₂AlH, ⁱBu₃Al and ⁱBu₂AlCl in presence of Zr catalysts. Chlorine containing complexes 1 and 2 appear to be more effective in alkene hydrometallation, and relative hydrometallation rates are (1S)-β-pinene ? (+)-camphene < α-methylstyrene < oct-1-ene < hept-1-ene. Hydrometallation of (1S)-β-pinene and its subsequent oxidation with I₂ run with high diastereoselectivity and yield trans-myrtanol. However, the diastereoselectivity of (+)-camphene hydrometallation is less than that for (1S)-β-pinene, and the reaction gives predominately endo-camphanol.     

Synthesis, characterisation of two hexa-iron clusters with {Fe2S2(CO)x} (x = 5 or 6) fragments and investigation into their inter-conversion

Reaction of a trithiol ligand, 2-(mercaptomethyl)-2-methylpropane-1,3-dithiol (H₃L), with tri-iron dodecacarbonyl in toluene produces two hexa-iron clusters (1 and 2). The two clusters are characterised crystallographically and spectroscopically. NMR spectroscopy reveals that the cluster 2 exists in two conformations in equilibrium 2_anti ⇔ 2_syn and the equilibrium constant K_eq = 0.55 under CO atmosphere. In the cluster 2, the central {Fe₂S₂(CO)₆} sub-unit is flanked by two identical {Fe₂S₂(CO)₆} satellite sub-units through thiolate linkages whereas one of the thiolate linkages can further form Fe-S bond with the proximal Fe atom in one of the two satellite sub-units to produce the cluster 1 by expelling one CO. This conversion can be entirely reversed by continuously purging CO through the solution of the cluster 1. As suggested by DFT calculations, the conversion features a key step, the rotation of the Fe_prox(CO)₃ to expose a vacant site for exogenic ligand binding (the S atom from the central sub-unit in this case) with concomitant switch for one of the three CO ligands in the unit of Fe_prox(CO)₃ from terminal to bridging orientation. The conversion from the clusters 1-2 involving one CO uptake is much faster than its reverse process since the latter is an endergonic process characterised by large reaction barriers, as revealed by the DFT calculations.     

Formation of multifunctional ligands by nucleophilic addition of alcohols and thiols to the alkyne groups in compound C5H5FeC5H4CCSCCH: Reactivity studies

The multifunctional ligands [(Z)-FcCCSC(H)C(H)XR] [X = O, R = Me (2a); X = O, R = Et (2b); X = S, R = Ph (3); X = S, R = C₆F₅ (5)] and [(Z,Z)-Fc(SR)CC(H)SC(H)C(H)SR] [R = Ph (4), C₆F₅ (6)] have been prepared through hydroalkoxylation and hydrothiolation processes of the alkyne groups in the compound FcCCSCCH 1. Reactions between compound 3 and the carbonyl metals Co₂(CO)₈, Os₃(CO)₁₀(NCMe)₂ and Fe₂(CO)₉ have allowed the synthesis of the polynuclear compounds [(Z)-{Co₂(CO)₆}(μ-η²-FcCCSC(H)C(H)SPh)] 9, [(Z)-Os₃(CO)₉(μ-CO){μ₃-η²-FcCCSC(H)C(H)(SPh)}] 10 and [(Z)-{Fe₃(CO)₉}[μ₃,η³-(CCS)-FcCCSC(H)C(H)(SPh)] 11. All the compounds have been characterized by elemental analysis, ¹H and ¹³C{¹H} NMR spectroscopy, mass spectrometry and the crystal structure of compounds [(Z)-FcCCSC(H)C(H)OMe] 2a and [{Co₂(CO)₆}₂(μ-η²:η²-FcCCSCCSiMe₃)] 7 have been solved by X ray diffraction analysis.     

Molybdenum/cobalt/sulfur clusters: Models and precursors for hydrodesulfurization (HDS) catalysts

Sulfido clusters which incorporate molybdenum and a late transition metal, e.g. iron, cobalt or nickel, are readily prepared by the reactions of Cp₂Mo₂S₄, Cp₂Mo₂S₂(SR)₂ or Cp₂Mo₂(CO)₂(SR)₂ with Fe₂(CO)₉, Co₂(CO)₈, Ni(CO)₄, Cp₂Ni, etc. The homogeneous reactions of the cluster Cp₂Mo₂Co₂S₃(CO)₄ with thiols, thiophene, and phosphines are reviewed, as are some reactions of the clusters with metal oxide surfaces to produce heterogeneous catalysts for CO hydrogenation or hydrodesulfurization.     

Some complexes containing carbon chains end-capped by M(CO)2Tp′ [M = Mo, W; Tp′ = HB(pz)3, HB(dmpz)3] groups

Complexes M(CCCSiMe₃)(CO)₂Tp′ (Tp′ = Tp [HB(pz)₃], M = Mo 2, W 4; Tp′ = Tp^∗ [HB(dmpz)₃], M = Mo 3) are obtained from M(CCCSiMe₃)(O₂CCF₃)(CO)₂(tmeda) (1) and K[Tp′].Reactions of 2 or 4 with AuCl(PPh₃)/K₂CO₃ in MeOH afforded M{CCCAu(PPh₃)}(CO)₂Tp′ (M = Mo 5, W 6) containing C₃ chains linking the Group 6 metal and gold centres.In turn, the gold complexes react with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ to give the C₄-bridged {Tp(OC)₂M}CCCC{Co₃(μ-dppm)(CO)₇} (M = Mo 7, W 8), while Mo(CBr)(CO)₂Tp^∗ and Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ give {Tp^∗(OC)₂Mo}C(CC)₂C{Co₃(μ-dppm)(CO)₇} (9) via a phosphine-gold(I) halide elimination reaction. The C₃ complexes Tp′(OC)₂MCCCRu(dppe)Cp^∗ (Tp′ = Tp, M = Mo 10, W 11; Tp′ = Tp^∗, M = Mo 12) were obtained from 2-4 and RuCl(dppe)Cp^∗ via KF-induced metalla-desilylation reactions. Reactions between Mo(CBr)(CO)₂Tp^∗ and Ru{(CC)_nAu(PPh₃)}(dppe)Cp^∗ (n = 2, 3) afforded {Tp^∗(OC)₂Mo}C(CC)_n{Ru(dppe)Cp^∗} (n = 2 13, 3 14), containing C₅ and C₇ chains, respectively. Single-crystal X-ray structure determinations of 1, 2, 7, 8, 9 and 12 are reported.     

The first non-acetato members of the bis(anion)octacarboxylatotetrakis{di-2-pyridyl-methanediolate(−2)}enneametal(II) family of complexes: Synthesis, X-ray structures and magnetism of [M9(N3)2(O2CCMe3)8{(py)2CO2}4] (M = Co, Ni)

The combined use of di-2-pyridyl ketone [(py)₂CO] and azides (N₃⁻) in nickel(II) and cobalt(II) pivalate chemistry has afforded complexes [Ni₉(N₃)₂(O₂CCMe₃)₈{(py)₂CO₂}₄] (1) and [Co₉(N₃)₂(O₂CCMe₃)₈{(py)₂CO₂}₄] (2), where (py)₂CO₂²⁻ is the gem-diolate(−2) form of (py)₂CO. The complexes are isostructural and crystallize in the monoclinic P2₁/c space group. Their molecular structures consist of nine metal(II) ions, eight of which are arranged as two parallel squares flanking the ninth. DC magnetic susceptometry on powdered samples of 1 (1-p) reveal an overall antiferromagnetic behavior, leading to an S = 0 ground state. AC susceptometry reveals out-of-phase signals between 10 and 27 K, and ZFC and FC experiments show a divergence of the two curves below ∼27 K. Magnetization-decay and field-sweep experiments verify the relaxation behavior of the sample. Samples of the complex arising from carefully washed single crystals (1-cr) reveal a similar DC behavior, without however the appearance of cusps in the χ_ΜΤ versus T curves, and no relaxation. The relaxation behavior has been assigned to NiO impurities. The results illustrate the extreme care that should be taken when examining the magnetic properties of apparently analytically pure materials obtained under heating. Complex 2 exhibits an overall antiferromagnetic behavior, without observation of any relaxation phenomena.     

Photophysical properties and computational investigations of tricarbonylrhenium(I)[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]L and tricarbonylrhenium(I)[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]L derivatives (X = N-CH3, O, or S; L = Cl, pyridine)

We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N-N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X = N-CH₃, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X = N-CH₃, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)₃[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X = N-CH₃, 1; X = O, 2; X = S, 3) and Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X = N-CH₃, 4; X = O, 5; X = S, 6) were synthesized heating at reflux Re(CO)₅Cl with the appropriate N-N ligand in toluene. The corresponding pyridine set {Re(CO)₃[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF₆ (X = N-CH₃, 7; X = O, 8; X = S, 9) and {Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF₆ (X = N-CH₃, 10; X = O, 11; X = S, 12) was synthesized by halide abstraction with silver nitrate of 1-6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes.     

Binuclear cyclopentadienylvanadium carbonyl thiocarbonyls: Vanadium-vanadium bonding and four-electron donor bridging thiocarbonyl groups

Theoretical studies on the cyclopentadienylvanadium carbonyl thiocarbonyls Cp₂V₂(CS)₂(CO)_n (n = 5, 4, 3, 2, 1, 0) indicate the energetic preference for structures with four-electron donor bridging CS groups. Thus the lowest energy Cp₂V₂(CS)₂(CO)₅ structures have an “end-on” four-electron donor CE (E = O, S) bridge and no vanadium-vanadium bond. The lowest energy Cp₂V₂(CS)₂(CO)₄ structure has a four-electron donor bridging η²-μ-CS group and a V-V distance of ∼3.0 Å corresponding to a formal single bond. The lowest energy Cp₂V₂(CS)₂(CO)₃ structures also have a single bridging η²-μ-CS group. Both Cp₂V₂(CS)₂(CO)_n (n = 4 and 3) are predicted to lie energetically above the disproportionation products Cp₂V₂(CS)₂(CO)_n+1 + Cp₂V₂(CS)₂(CO)_n−1. This contrasts with the stable carbonyl analog Cp₂V₂(CO)₅, which has been synthesized and characterized structurally by X-ray diffraction. The lowest energy structures for the highly unsaturated Cp₂V₂(CS)₂(CO) and Cp₂V₂(CS)₂ have two four-electron bridging η²-μ-CS groups. The distances corresponding to V-V single bonds, VV double bonds, and VV triple bonds in the Cp₂V₂(CS)₂(CO)_n structures (n = 4, 3, 2, 1, 0) are predicted to fall in the ranges 2.98 ± 0.07, 2.77 ± 0.21, and 2.52 ± 0.06 Å, respectively. The thermodynamics of the Cp₂V₂(CS)₂(CO)_n system suggest Cp₂V₂(CS)₂(CO)₂ as the most promising synthetic objective.     

Structure and reactivity of derivatives of dihalogenomethyl indium(III) halides, X2InCHX2 (X = Cl, Br, I)

The reactions of indium monohalides, InX with haloforms, CHX₃, in 1,4-dioxane (diox), produce the dioxane adducts of dihalogeno-dihalogenomethyl-indium(III), X₂In(diox)_nCHX₂ (X = Cl, Br, n = 1; X = I, n = 2) compounds. The ionic derivative [(C₂H₅)₄N] [Cl₃InCHCl₂] was prepared and its crystal structure determined by X-ray means. The reactions of the X₂In(diox)_nCHX₂ compounds are significantly different from those of the related X₂InCH₂X compounds. The dihalogenomethyl derivatives react with strong electrophiles suggesting dihalogenomethyl substituents of mild nucleophilic character, while the carbon atoms in the halogenomethyl derivatives are electrophilic.     

Reactions of the metallocene dichlorides [M(Cp)2Cl2] (M = Zr, Hf) and [Ti(MeCp)2Cl2] with the pyridine-2,6-dicarboxylate(−2) ligand: Synthesis, spectroscopic characterization and X-ray structures of the products

The reactivity pattern of the 16-electron species [M(Cp)₂Cl₂] (M = Zr, Hf; Cp⁻ = η⁵-C₅H₅⁻) and [Ti(MeCp)₂Cl₂] (MeCp⁻ = η⁵-C₅H₄CH₃⁻) towards the dipicolinate(−2) (dipic²⁻) ligand under mild (ambient temperature) and convenient (aerobic reactions, aqueous media) conditions have been investigated. The syntheses, molecular structures and spectroscopic (IR, ¹H NMR) characterization are reported for the 18-electron products [Zr(Cp)₂(dipic)] (1), [Hf(Cp)₂(dipic)] (2) and [Ti(MeCp)₂(dipic)] (3). The dipic²⁻ ion behaves as N,O,O′-chelating ligand in the three complexes, while the centroids of the Cp⁻ (1, 2) and MeCp⁻ (3) rings formally occupy the fourth and fifth coordination sites about the central metal. The two identical/very similar bite angles of only ∼70° make the dipic²⁻ ligand particularly suited to form stable metallocene derivatives with 5-coordinate geometry. IR and ¹H NMR data are discussed in terms of the known structures and the tridentate chelating mode of the dipic²⁻ ligand.     

Synthesis, structure and some reactions of (C5Me4hex)2Ru2(CO)4

The synthesis of the new cyclopentadiene, C₅Me₄(hex)H is described and its reaction with Ru₃(CO)₁₂ to yield (C₅Me₄hex)₂Ru₂(CO)₄ (hex = n-hexyl) is reported. The X-ray crystal structure of the dimer confirms the structure with bridging and terminal CO groups. Reactions of the dimer to yield (C₅Me₄hex)Ru(CO)₂X (X = Cl, Br, I) are reported. IR, NMR and mass spectra are reported for all new compounds. The solubility of the dimer is found to be 10 times greater than that for (C₅Me₅)₂Ru₂(CO)₄.     

Reaction studies on some functionalized alkyl transition metal compounds and the crystal structure of [Cp(CO)3W{(CH2)3NO2}]

The reactions of the halogenoalkyl compounds [Cp(CO)₃W{(CH₂)_nX}] (Cp = η⁵-C₅H₅; n = 3-5; X = Br, I) and [Cp(CO)₂(PPhMe₂)Mo{(CH₂)₃Br}] with the nucleophiles Z = CN⁻ and gave compounds of the type [Cp(CO)₃W{(CH₂)_nZ}] for the tungsten compounds, whilst cyclic carbene compounds were obtained from the reactions of the molybdenum compound. The reactions of [Cp(CO)₃W{(CH₂)_nBr}] (n = 3, 4) and [Cp(CO)₂(PPhMe₂)Mo{(CH₂)₃Br}] with gave [Cp(CO)₃W{(CH₂)_nONO₂}] and [Cp(CO)₂(PPhMe₂)Mo{(CH₂)₃ONO₂}], respectively. The reaction of [Cp(CO)₃W{(CH₂)_nBr}] with AgNO₂ gave [Cp(CO)₃W{(CH₂)_nNO₂}]. In the solid state the complex [Cp(CO)₃W{(CH₂)₃NO₂}] crystallizes in a distorted square pyramidal geometry. In this molecule the nitropropyl chain deviates from the ideal, all-trans geometry as a result of short, non-hydrogen intermolecular N-O?O-N contacts. The reactions of the heterobimetallic compounds [Cp(CO)₃W{(CH₂)₃}ML_y] {ML_y = Mo(CO)₃Cp, Mo(CO)₃Cp^∗ and Mo(CO)₂(PMe₃)Cp; Cp^∗ = η⁵-C₅(CH₃)₅} with PPh₃ and CO were found to be totally metalloselective, with the ligand always attacking the metal site predicted by the reactions of the corresponding monometallic analogues above with nucleophiles. Thus the compounds [Cp(CO)₃W{(CH₂)₃}C(O)ML_z] {ML_z = Mo(CO)₂YCp, Mo(CO)₂YCp^∗ and Mo(CO)Y(PMe₃)Cp; Y = PPh₃ or CO} were obtained. Similarly, the reaction of [Cp(CO)₂Fe{(CH₂)₃}Mo(CO)₂(PMe₃)Cp] with CO gave only [Cp(CO)₂Fe{(CH₂)₃C(O)}Mo(CO)₂(PMe₃)Cp]. Hydrolysis of the bimetallic compound, [Cp(CO)₃W(CH₂)₃C(O)Mo(CO)(PPh₃)(PMe₃)Cp], gave the carboxypropyl compound [Cp(CO)₃W{(CH₂)₃COOH}]. Thermolysis of the compound [Cp(CO)₂Fe(CH₂)₃Mo(CO)₃(PMe₃)Cp] gave cyclopropane and propene, indicating that β-elimination and reductive processes had taken place.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Synthesis and crystal structure of the double cluster [Cp3Fe4(CO)4(C5H4)]2(p-C6H4)

[Cp₄Fe₄(CO)₄] (1) reacts with p-BrC₆H₄Li and MeOH in sequence to afford the functionalized cluster [Cp₃Fe₄(CO)₄(C₅H₄-p-C₆H₄Br)] (2), while the reaction of 2 with n-BuLi and MeOH produces [Cp₂Fe₄(CO)₄(C₅H₄Bu)(C₅H₄-p-C₆H₄Br)] (3). The double cluster [Cp₃Fe₄(CO)₄(C₅H₄)]₂(p-C₆H₄) (4) has been prepared by treatment of [Cp₄Fe₄(CO)₄] with p-C₆H₄Li₂ and MeOH in sequence. The electrochemistry of 2 and 4, as well as the crystal structure of 4 have been investigated.     

Synthesis of heterometallic cluster compounds from Fe3(μ3-Te)2(CO)9 and comparisons with analogous sulfide clusters

Fe₃Te₂(CO)₉ is shown to be a useful precursor to a variety of heterometallic carbonyl clusters in reactions which appear to proceed via the intermediacy of Fe₂(Te₂)(CO)₆. Fe₃Te₂(CO)₉ decomposed in polar solvents to give Fe₂(Te₂)(CO)₆ which could be dimerized to Fe₄Te₄(CO)₁₂. Fe₃Te₂(CO)₉ reacted with C₅H₅Co(CO)₂ and Pt(C₂H₄)(PPh₃)₂ to give good yields of (C₅H₅CO)Fe₂Te₂(CO)₇ and Fe₂PtTe₂(CO)₆(PPh₃)₂, respectively. (C₅H₅Co)Fe₂Te₂(CO)₇ underwent reversible decarbonylation to give a mixture of two isomers of (C₅H₅Co)Fe₂Te₂(CO)₆ as established by ¹²⁵Te NMR spectroscopy. Upon reaction with Co₂(CO)₈, Fe₃Te₂(CO)₉ gave Co₂FeTe(CO)₉ or Co₄Te₂(CO)₁₁ depending on the reaction conditions. Co₄Te₂(CO)₁₁, like Fe₃Te₂(CO)₁₀ and (C₅H₅Co)Fe₂Te₂(CO)₇, can be reversibly decarbonylated. The assembly of Co₂FeTe(CO)₉ may be mechanistically related to the conversion of Fe₂(S₂)(CO)₆ to FeCo₂S(CO)₉ which was found to proceed via Co₂Fe₂S₂(CO)₁₁. Alternatively, Co₂Fe₂S₂(CO)₁₁ reacted photochemically with [C₅H₅Mo(CO)₃]₂ to give the known, chiral cluster (C₅H₅Mo)CoFeS(CO)₈. While Fe₂(Te₂)(CO)₆ thermally dimerized to Fe₄Te₄(CO)₁₂, Fe₂(S₂)(CO)₆ gave the analogous dimer only upon photolysis. In contrast to the stability of (C₅H₅CO)Fe₂Te₂(CO)₇, the reaction of C₅H₅Co(CO)₂ with Fe₂(S₂)(CO)₆ gave only (C₅H₅CO)Fe₂S₂(CO)₆ which is proposed to be structurally related to Fe₃S₂(CO)₉ and not (C₅H₅Co)₃S₂ or Fe₂PtS₂(CO)₆(PPh₃)₂.     

Thermodynamic studies on SrFe12O19(s), SrFe2O4(s), Sr2Fe2O5(s) and Sr3Fe2O6(s)

The citrate-nitrate gel combustion route was used to prepare SrFe₂O₄(s), Sr₂Fe₂O₅(s) and Sr₃Fe₂O₆(s) powders and the compounds were characterized by X-ray diffraction analysis. Different solid-state electrochemical cells were used for the measurement of emf as a function of temperature from 970 to 1151 K. The standard molar Gibbs energies of formation of these ternary oxides were calculated as a function of temperature from the emf data and are represented as (SrFe₂O₄, s, T)/kJ mol⁻¹ (±1.7)=−1494.8+0.3754 (T/K) (970?T/K?1151). (Sr₂Fe₂O₅, s, T)/kJ mol⁻¹ (±3.0)=−2119.3+0.4461 (T/K) (970?T/K?1149). (Sr₃Fe₂O₆, s, T)/kJ mol⁻¹ (±7.3)=−2719.8+0.4974 (T/K) (969?T/K?1150).Standard molar heat capacities of these ternary oxides were determined from 310 to 820 K using a heat flux type differential scanning calorimeter (DSC). Based on second law analysis and using the thermodynamic database FactSage software, thermodynamic functions such as Δ_fH°(298.15 K), S°(298.15 K) S°(T), C_p°(T), H°(T), {H°(T)-H°(298.15 K)}, G°(T), free energy function (fef), Δ_fH°(T) and Δ_fG°(T) for these ternary oxides were also calculated from 298 to 1000 K.     

The mer-[RuCl3(dppb)(H2O)] complex: A versatile tool for synthesis of Ru compounds

The complex mer-[RuCl₃(dppb)(H₂O)] [dppb = 1,4-bis(diphenylphosphino)butane] was used as a precursor in the synthesis of the complexes tc-[RuCl₂(CO)₂(dppb)], ct-[RuCl₂(CO)₂(dppb)], cis-[RuCl₂(dppb)(Cl-bipy)], [RuCl(2Ac4mT)(dppb)] (2Ac4mT = N(4)-meta-tolyl-2-acetylpyridine thiosemicarbazone ion) and trans-[RuCl₂(dppb)(mang)] (mang = mangiferin or 1,3,6,7-tetrahydroxyxanthone-C2-β-D-glucoside) complexes. For the synthesis of Ru^II complexes, the Ru^III atom in mer-[RuCl₃(dppb)(H₂O)] may be reduced by H₂(g), forming the intermediate [Ru₂Cl₄(dppb)₂], or by a ligand (such as H2Ac4mT or mangiferin). The X-ray structures of the cis-[RuCl₂(dppb)(Cl-bipy)], tc-[RuCl₂(CO)₂(dppb)] and [RuCl(2Ac4mT)(dppb)] complexes were determined.