Tin(IV) complexes obtained by reacting 2-benzoylpyridine-derived thiosemicarbazones with SnCl4 and Ph2SnCl2

Reaction of 2-benzoylpyridine thiosemicarbazone (H2Bz4DH, HL1) and its N(4)-methyl (H2Bz4Me, HL2) and N(4)-phenyl (H2Bz4Ph, HL3) derivatives with SnCl₄ and diphenyltin dichloride (Ph₂SnCl₂) gave [Sn(L1)Cl₃] (1), [Sn(L1)PhCl₂] (2), [Sn(L2)Cl₃] (3), (4) [Sn(L3)PhCl₂] (5) and [Sn(L3)Ph₂Cl] (6). Infrared and ¹H, ¹³C and ¹¹⁹Sn NMR spectra of 1-3, 5 and 6 are compatible with the presence of an anionic ligand attached to the metal through the N_py-N-S chelating system and formation of hexacoordinated tin complexes. The crystal structures of 1-3, 5 and 6 show that the geometry around the metal is a distorted octahedron formed by the thiosemicarbazone and either chlorides or chlorides and phenyl groups. The crystal structure of 4 reveals the presence of and trans [Ph₂SnCl₄]²⁻.     

Titanium and zirconium complexes containing sterically hindered hydrotris(pyrazolyl)borate ligands: synthesis, structural characterization, and ethylene polymerization studies

The synthesis, characterization and ethylene polymerization behavior of a set of Tp^′MCl₃ complexes (4, M=Ti, Tp^′=HB(3-neopentyl-pyrazolyl)₃⁻(Tp^Np); 5, M=Ti, Tp^′=HB(3-tert-butyl-pyrazolyl)₃⁻(Tp^tBu); 6, M = Ti, Tp^′=HB(3-phenyl-pyrazolyl)₃⁻(Tp^Ph); 7, M=Zr, Tp^′=HB(3-phenyl-pyrazolyl)₃⁻(Tp^Ph); 8, M=Zr, Tp^′ = HB(3-tert-butyl-pyrazolyl)₃⁻(Tp^tBu)) is described. Treatment of these tris(pyrazolyl)borate Group IV compounds with methylalumoxane (MAO) generates active catalysts for ethylene polymerization. For the polymerization reactions performed in toluene at 60 °C and 3 atm of ethylene pressure, the activities varied between 1.3 and 5.1 × 10³ g of PE/mol[M] · h. The highest activity is reached using more sterically open catalyst precursor 4. The viscosity-average molecular weights () of the PE’s produced with these catalyst precursors varying from 3.57 to 20.23 × 10⁵ g mol⁻¹ with melting temperatures in the range of 127-134 °C. Further polymerization studies employing 7 varying Al/Zr molar ratio and temperature of polymerization showed that the activity as well as the polymer properties are dependent on these parameters. In that case, higher activity was attained at 60 °C. The viscosity-average molecular weights of the polyethylene’s decreases with increasing Al/Zr molar ratio.     

An amino acid bioconjugate of an organoplatinum tris(pyrazolyl)borate complex: Synthesis and structure of [p-(BuO-Phe-CO)C6H4Tp]PtMe3

The platinum trimethyl complex of a benzoic acid-functionalized hydrido-tris(pyrazolyl)borate (Tp) ligand [p-(HO₂C)C₆H₄Tp]PtMe₃4 has been synthesized from the corresponding p-bromo complex [p-BrC₆H₄Tp]PtMe₃3. Compound 4 may be readily coupled to biomolecules such as amino acids as exemplified by coupling to l-phenylalanine-tert-butylester to provide [p-(^tBuO-Phe-CO)C₆H₄Tp]PtMe₃5. Compound 5 has been structurally characterized in the solid state by X-ray diffraction. It constitutes the first example of a tris(pyrazolyl)borate bioconjugate.     

Novel hydridotris(pyrazolyl)borate ruthenium(II) complexes containing the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane: Synthesis and evaluation of DNA binding properties

A series of half-sandwich ruthenium(II) complexes containing κ³(N,N,N)-hydridotris(pyrazolyl)borate (κ³(N,N,N)-Tp) and the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane (PTA) [RuX{κ³(N,N,N)-Tp}(PPh₃)_2−n(PTA)_n] (n = 2, X = Cl (1), n = 1, X = Cl (2), I (3), NCS (4), H (5)) and [Ru{κ³(N,N,N)-Tp}(PPh₃)(PTA)L][PF₆] (L = NCMe (6), PTA (7)) have been synthesized. Complexes containing 1-methyl-3,5-diaza-1-azonia-7-phosphaadamantane(m-PTA) triflate [RuCl{κ³(N,N,N)-Tp}(m-PTA)₂][CF₃SO₃]₂ (8) and [RuX{κ³(N,N,N)-Tp}(PPh₃)(m-PTA)][CF₃SO₃] (X = Cl (9), H (10)) have been obtained by treatment, respectively, of complexes 1, 2 and 5 with methyl triflate. Single crystal X-ray diffraction analysis for complexes 1, 2 and 4 have been carried out. DNA binding properties by using a mobility shift assay and antimicrobial activity of selected complexes have been evaluated.     

Synthesis and characterization of palladium(II) complexes with chiral aminophosphine ligands: Catalytic behaviour in asymmetric hydrovinylation. Crystal structure of cis-[PdCl2(PPh((R)-NHCHCH3Ph)2)2]

Optically active ligands of type Ph₂PNHR (R = (R)-CHCH₃Ph, (a); (R)-CHCH₃Cy, (b); (R)-CHCH₃Naph, (c)) and PhP(NHR)₂ (R = (R)-CHCH₃Ph, (d); (R)-CHCH₃Cy, (e)) with a stereogenic carbon atom in the R substituent were synthesized. Reaction with [PdCl₂(COD)₂] produced [PdCl₂P₂] (1) (P = PhP(NHCHCH₃Ph)₂), whose molecular structure determined by X-ray diffraction showed cis disposition for the ligands. All nitrogen atoms of amino groups adopted S configuration. The new ligands reacted with allylic dimeric palladium compound [Pd(η³-2-methylallyl)Cl]₂ to gave neutral aminophosphine complexes [Pd(η³-2-methylallyl)ClP] (2a-2e) or cationic aminophosphine complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3a-3e) in the presence of the stoichiometric amount of AgBF₄. Cationic complexes [Pd(η⁴3-2-methylallyl)(NCCH₃)P]BF₄ (4a-4e) were prepared in solution to be used as precursors in the catalytic hydrovinylation of styrene. ³¹P NMR spectroscopy showed the existence of an equilibrium between the expected cationic mixed complexes 4, the symmetrical cationic complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3) and [Pd(η³-2-methylallyl)(NCCH₃)₂]BF₄ (5) coming from the symmetrization reaction. The extension of the process was studied with the aminophosphines (a-e) as well as with nonchiral monodentate phosphines (PCy₃ (f), PBn₃ (g), PPh₃ (h), PMe₂Ph (i)) showing a good match between the extension of the symmetrization and the size of the phosphine ligand. We studied the influence of such equilibria in the hydrovinylation of styrene because the behaviour of catalytic precursors can be modified substantially when prepared ‘in situ’. While compounds 3 and bisacetonitrile complex 5 were not active as catalysts, the [Pd(η³-2-methylallyl)(η²-styrene)₂]⁺ species formed in the absence of acetonitrile showed some activity in the formation of codimers and dimers. Hydrovinylation reaction between styrene and ethylene was tested using catalytic precursors solutions of [Pd(η³-2-methylallyl)LP]BF₄ ionic species (L = CH₃CN or styrene) showing moderate activity and good selectivity. Better activities but lower selectivities were found when L = styrene. Only in the case of the precursor containing Ph₂PNHCHCH₃Ph (a) ligand was some enantiodiscrimination (10%) found.     

Synthesis and structural characterization of sterically crowded hydridotris(pyrazolyl)borato complexes: Unusual double 1,2-borotropic shift at a titanium centre

The potassium and thallium(I) derivatives of the hydrido-tris(3-Me₂Bz,5-Me-pyrazol-1-yl)borato ligand, K[Tp^Me2^Bz,Me] (1) and Tl[Tp^Me2^Bz,Me] (2), are reported. Their reactions with TiCl₄ under mild conditions afforded, after rearrangement of the ligand, recognized as a double 1,2-borotropic shift, the related Ti(IV) complex {hydrido-[bis(3-Me,5-Me₂Bz)(3-Me₂Bz,5-Me)-pyrazol-1-yl]borato}trichlorotitanium(IV), [Tp^Me2^Bz,Me∗∗] TiCl₃ (3). The ¹H- and ¹³C NMR spectra of the new compounds are discussed, the molecular structure of 3 has been determined by X-ray diffraction methods, the titanium centre has a pseudo-octahedral coordination, with the nitrogen and chloride ligands in a fac geometry. A possible mechanism of formation of 3 is proposed.     

Synthesis and reactivity of hydride and dihydrogen complexes of ruthenium with tris(pyrazolyl)borate and phosphite ligands

Chloro phosphite complexes RuClTpL(PPh₃) (1a, 1b) [L = P(OEt)₃, PPh(OEt)₂] and RuClTp[P(OEt)₃]₂ (1c) [Tp = hydridotris(pyrazolyl)borate] were prepared by allowing RuClTp(PPh₃)₂ to react with an excess of phosphite. Treatment of the chloro complexes 1 with NaBH₄ in ethanol yielded the hydride RuHTpL(PPh₃) (2a, 2b) and RuHTp[P(OEt)₃]₂ (2c) derivatives. Protonation reaction of 2 with Brønsted acids was studied and led to thermally unstable (above 10 °C) dihydrogen [Ru(η²- H₂)TpL(PPh₃)]⁺ (3a, 3b) and [Ru(η²-H₂)Tp{P(OEt)₃}₂]⁺ (3c) complexes. The presence of the η²-H₂ ligand is indicated by short T_1 min values and J_HD measurements of the partially deuterated derivatives. Aquo [RuTp(H₂O)L(PPh₃)]BPh₄ (4), carbonyl [RuTp(CO)L(PPh₃)]BPh₄ (5), and nitrile [RuTp(CH₃CN)L(PPh₃)]BPh₄ (6) derivatives [L = P(OEt)₃] were prepared by substituting H₂ in the η²-H₂ derivatives 3. Vinylidene [RuTp{CC(H)R}L(PPh₃)]BPh₄ (7, 8) (R = Ph, ^tBu) and allenylidene [RuTp(CCCR1R2)L(PPh₃)]BPh₄ (9-11) complexes (R1 = R2 = Ph, R1 = Ph R2 = Me) were also prepared by allowing dihydrogen complexes 3 to react with the appropriate HCCR and HCCC(OH)R1R2 alkynes. Deprotonation of vinylidene complexes 7, 8 with NEt₃ was studied and led to acetylide Ru(CCR)TpL(PPh₃) (12, 13) derivatives. The trichlorostannyl Ru(SnCl₃)TpL(PPh₃) (14) compound was also prepared by allowing the chloro complex RuClTpL(PPh₃) to react with SnCl₂ · 2H₂O in CH₂Cl₂.     

Nickel(IV) dithiocarbamato complexes of the [Ni(ndtc)3]X type: X-ray structure of [Ni(hmidtc)3][FeCl4]

A series of fourteen octahedral nickel(IV) dithiocarbamato complexes of the general formula [Ni(ndtc)₃]X·yH₂O {ndtc stands for the appropriate dithiocarbamate anion, X stands for ClO₄⁻ (1-8; y = 0) or [FeCl₄]⁻ (9-14; y = 0 for 9-12, 1 for 13 and 0.5 for 14} was prepared by the oxidation of the corresponding nickel(II) complexes, i.e. [Ni(ndtc)₂], with NOClO₄ or FeCl₃. The complexes, involving a high-valent Ni^IVS₆ core, were characterized by elemental analysis (C, H, N, Cl and Ni), UV-Vis and FTIR spectroscopy, thermal analysis and magnetochemical and conductivity measurements. The X-ray structure of [Ni(hmidtc)₃][FeCl₄] (9) was determined {it consists of covalently discrete complex [Ni(hmidtc)₃]⁺ cations and [FeCl₄]⁻ anions} and this revealed slightly distorted octahedral and tetrahedral geometries within the complex cations, and anions, respectively. The Ni(IV) atom is six-coordinated by three bidentate S-donor hexamethyleneiminedithiocarbamate anions (hmidtc), with Ni-S bond lengths ranging from 2.2597(5) to 2.2652(5) Å, while the shortest Ni···Cl and Ni···Fe distances equal 4.1043(12), and 6.2862(6) Å, respectively. Moreover, the formal oxidation state of iron in [FeCl₄]⁻ as well as the coordination geometry in its vicinity was also proved by ⁵⁷Fe Mössbauer spectroscopy in the case of 9.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Synthesis and characterization of organophosphine/phosphite stabilized silver(I) methanesulfonates: Crystal structures of [Ph3PAgO3SCH3] and [(Ph3P)2AgO3SCH3]

Six organophosphine/phosphite stabilized silver(I) methanesulfonates of type [L_nAgO₃SCH₃] (L = Ph₃P, n = 1, 2a; n = 2, 2b; n = 3, 2c; L = (EtO)₃P; n = 1, 2d; n = 2, 2e; n = 3, 2f) were synthesized by the reaction of silver methanesulfonates with triphenylphosphine or triethylphosphite in dichloromethane under nitrogen atmosphere. These complexes were obtained in high yields and characterized by elemental analysis, ¹H-, ¹³C{H} NMR, IR spectroscopy and thermogravimetric analysis (TGA), respectively. X-ray single crystal analysis reveals that complex 2a is a tetramer [Ph₃PAgO₃SCH₃]₄ and complex 2b is a monomer. The thermal stability of 2a has been studied by applying thermogravimetric analysis. It starts to decompose between 50 and 440 °C in a three-step process. The final residue (Ag) is about 20.50%.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Electrochemical, EPR and computational results on [Fe2Cp2(CO)2]-based complexes with a bridging hydrocarbyl ligand

The dimetallacyclopentenone complexes [Fe₂Cp₂(CO)(μ−CO){μ−η¹:η³−C_αHC_β(R)C(O)}] (R = CH₂OH, 1a; R = CMe₂OH, 1b; R = Ph, 1c) were prepared by photolytic reaction of [Fe₂Cp₂(CO)₄] with alkyne according to the literature procedure. The X-ray and the electrochemical characterization of 1c are presented. The μ-allenyl compound [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β−C_αHC_βCMe₂][BF₄] ([2][BF₄]), obtained by reaction of 1b with HBF₄, underwent monoelectron reduction to give a radical species which was detected by EPR at room temperature. The EPR signal has been assigned to [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β-C_αHC_βCMe₂}], [2]^•. The molecular structures of [2]⁺ and [2]^• were optimized by DFT calculations. The unpaired electron in [2]^• is localized mainly at the metal centers and, coherently, [2]^• does not undergo carbon-carbon dimerization, by contrast with what previously observed for the μ-vinyl radical complex [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²-CHCH(Ph)}]^•, [3]^•. Electron spin density distributions similar to the one of [2]^• were found for the μ-allenyl radical complexes [Fe₂Cp₂(CO)₂(μ-CO){μ-η¹:η²_α,β-C_αHC_βC(R¹)(R²)}]^• (R¹ = R² = H, [4]^•; R¹ = H, R² = Ph, [5]^•; R¹ = R² = Ph, [6]^•).     

Ferrocene-Mn π-interaction in the complex [Fc2Bpz2Mn(THF)Cl]

The ferrocene-based bis(pyrazol-1-yl)borate ligands [Fc₂Bpz₂]⁻ ([2]⁻) and [Fc₂Bpz^Ph₂]⁻ ([2^Ph]⁻) have been prepared (Fc: ferrocenyl; pz: pyrazol-1-yl; pz^Ph: 3-phenylpyrazol-1-yl). Treatment of [2]⁻ and [2^Ph]⁻ with MnCl₂ in THF leads to the complexes [Fc₂Bpz₂Mn(THF)(μ-Cl)₂Mn(THF)pz₂BFc₂] (3) and [Fc₂Bpz^Ph₂Mn(THF)Cl] (3^Ph), respectively, which have been structurally characterized by X-ray crystallography. While there is clearly no ferrocene-Mn^II π-coordination in the solid-state structure of 3, short Mn^II-C₅H₄ contacts are established in 3^Ph (shortest Mn-C distances: 2.780(2) Å, 2.872(2) Å). The cyclic voltammograms of K[2^Ph] and 3^Ph show the first ferrocene/ferricinium redox wave of 3^Ph to be shifted anodically by 0.60 V compared with the first Fe^II/Fe^III transition of K[2^Ph].     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

C-NMR study of Ti(IV) species formed by Cp*TiMe3 and Cp*TiCl3 activation with methylaluminoxane (MAO)

Using ¹³C- and ¹H-NMR spectroscopy, titanium(IV) species formed in the catalytic systems Cp*TiMe₃/MAO and Cp*TiCl₃/MAO (Cp*=C₅(CH₃)₅) in toluene and chlorobenzene were studied within the temperature range 253-293 K and at Al/Ti ratios 30-300. It was shown that upon activation of Cp*TiMe₃ with methylaluminoxane (MAO) mainly the ‘cation-like’ intermediate Cp*Me₂Ti⁺←Me⁻Al(MAO) (2) is formed. Three types of titanium(IV) complexes were identified in Cp*TiCl₃/MAO catalytic system. They are methylated complexes Cp*TiMeCl₂ and Cp*TiMe₂Cl, and the ‘cation-like’ intermediate 2. Complex 2 dominates in Cp*TiCl₃/MAO system in conditions approaching to those of practical polymerization (Al/Ti ratios more than 200). According to the EPR measurements, the portion of EPR active Ti(III) species in the Cp*TiCl₃/MAO system is smaller than 1% at Al/Ti=35, and is about 10% at Al/Ti=700.     

Ruthenium-based bioconjugates: Synthesis and X-ray structure of the mixed ligand sandwich compound RuCp(p-(CO2H)C6H4Tp) and labelling of amino acids and the neuropeptide enkephalin

Four differently substituted mixed ligand sandwich complexes CpRu(p-BrC₆H₄)Tp (3), CpRu(p-BrC₆H₄)Tp^Me (4), Cp^∗Ru(p-BrC₆H₄)Tp (5), Cp^iPrRu(p-BrC₆H₄)Tp (6), incorporating cyclopentadienyl (Cp) and functionalized tris(pyrazolyl)borate (Tp) ligands, have been synthesized and characterized. Air-stable 6 has been converted to benzoic acid-functionalized Cp^iPrRu(p-(CO₂H)C₆H₄)Tp (7), which has been structurally characterized in the solid state by X-ray diffraction. Compound 7 may be readily coupled to biomolecules as exemplified by the coupling to phenylalanine-methylester to give Cp^iPrRu(p-(CO-Phe-OMe)C₆H₄Tp) (8). In a solid phase peptide synthesis (SPPS), 7 has been coupled to the pentapeptide Enkephalin, to provide Cp^iPrRu(p-(CO-Tyr-Gly-Gly-Phe-Leu-OH)C₆H₄Tp) (9) as the first example of a mixed ligand sandwich ruthenium bioconjugate.     

Copper(I) complexes with fluorinated hydrotris(pyrazolyl)borate: Influence of electronic effects on their structure,physicochemical properties,and reactivity

Copper(I) coordination complexes of the anionic fluorinated ligand, hydrotris(3-trifluoromethyl-5-methyl-1-pyrazolyl)borate (L0f⁻), i.e. the copper(I) carbonyl complex, [Cu^I(L0f)(CO)] (1), the copper(I) triphenylphosphine complex, [Cu^I(L0f)(PPh₃)] (2), the copper(I) acetonitrile complex, [Cu^I(L0f)(NCMe)] (3), and the corresponding copper(I) triphenylphosphine complex with hydrotris(3,5-diisopropyl-1-pyrazolyl)-borate anion (L1⁻), i.e. [Cu^I(L1)(PPh₃)] (4), were synthesized in order to investigate the influence of the electron-withdrawing groups on the pyrazolyl rings. The structures of complexes 1, 2, and 4 were determined by X-ray crystallography. While X-ray crystallography did not show definitive trends in terms of copper(I) atom geometry, the clear influence of the electronic structure of the pyrazolyl rings is observed by spectroscopic techniques, namely, IR and multinuclear NMR spectroscopy. Finally, the relative stability of the copper(I) complexes is discussed.     

Rhodium(I) carbonyl complexes of tetradentate chalcogen functionalized phosphines, [P(X)(CH2CH2P(X)Ph2)3] {X = O, S, Se}: Synthesis, reactivity and catalytic carbonylation reaction

The reaction of [Rh(CO)₂Cl]₂ with 0.5 mol equivalent of the ligands [P^′(X)(CH₂-CH₂P(X)Ph₂)₃](P^′P₃X₄) {where X = O(a), S(b) and Se(c)} affords tetranuclear complexes of the type [Rh₄(CO)₈Cl₄(P^′P₃X₄)] (1a-1c). The complexes 1a-1c have been characterized by elemental analyses, mass spectrometry, IR and multinuclear NMR spectroscopy, and the ligands b and c are structurally determined by single crystal X-ray diffraction. 1a-1c undergo oxidative addition (OA) reactions with CH₃I to generate Rh(III) oxidised products. Kinetic data for the reaction of 1a and 1b with excess CH₃I indicate a pseudo first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester show a higher Turn Over Frequency (TOF = 1349-1748 h⁻¹) compared to the well-known species [Rh(CO)₂I₂]⁻ (TOF = 1000 h⁻¹) under the similar experimental conditions. However, 1b and 1c exhibit lower TOF than 1a, which may be due to the desulfurization and deselinization of the ligands in the respective complexes under the reaction conditions.     

Syntheses, structures and intermolecular interactions of tetraorganoammonium, -phosphonium and -stibonium dimethyl- and diphenyltetrahaloantimonates

The syntheses and spectroscopic (NMR, MS) investigations of the antimonates [Ph₄P]⁺[Me₂SbCl₄]⁻ (1), [Me₄Sb]⁺[Me₂SbCl₄]⁻ (2), [Et₄N]⁺[Ph₂SbCl₄]⁻ (3), [Bu₄N]⁺[Ph₂SbCl₄]⁻ (4), [Me₄Sb]⁺[Ph₂SbCl₄]⁻ (5), [Et₃MeSb]⁺[Ph₂SbCl₄]⁻ (6), [Et₄N]⁺[Ph₂SbF₄]⁻ (7) and [Et₄N]⁺[Ph₂SbBr₄]⁻ (8) are reported. Halogen scrambling reactions of Et₄NBr or Ph₄EBr (E = P, Sb) with R₂SbCl₃ (R = Me, Ph) produce mixtures of compounds from which crystals of [Et₄N]⁺[Ph₂SbBr_1.24Cl_2.76]⁻ (9), [Et₄N]⁺[Ph₂SbBr_2.92Cl_1.08]⁻ (10) or [Ph₄Sb]⁺[Me₂SbCl₄]⁻ (11) were isolated. The crystal and molecular structures of 1 and 3-11 are reported.     

Syntheses and properties of Re(III) complexes derived from hydrotris(1-pyrazolyl)methanes: molecular structure of [ReCl2(HCpz3)(PPh3)][BF4]

The complexes [ReCl₂{N₂C(O)Ph}(Hpz)(PPh₃)₂] (1) (Hpz = pyrazole), [ReCl₂{N₂C(O)Ph}(Hpz)₂(PPh₃)] (2), [ReCl₂(HCpz₃)(PPh₃)][BF₄] (3) and [ReCl₂(3,5-Me₂Hpz)₃(PPh₃)]Cl (4) were obtained by treatment of the chelate [ReCl₂{η²-N,O-N₂C(O)Ph}(PPh₃)₂] (0) with hydrotris(1-pyrazolyl)methane HCpz₃ (1,3), pyrazole Hpz (1,2), hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me₂pz)₃ (4) or dimethylpyrazole 3,5-Me₂Hpz (4). Rupture of a C(sp³)-N bond in HCpz₃ or HC(3,5-Me₂pz)₃, promoted by the Re centre, has occurred in the formation of 1 or 4, respectively. All compounds have been characterized by elemental analyses, IR and NMR spectroscopy, FAB-MS spectrometry, cyclic voltammetry and, for 1 · CH₂Cl₂ and 3, also by single crystal X-ray analysis. The electrochemical E_L Lever parameter has been estimated, for the first time, for the HCpz₃ and the benzoyldiazenide NNC(O)Ph ligands.