Synthese und Struktur von Ammin- und Amidokomplexen des Iridiums

Synthesis and Structure of Ammine and Amido Complexes of Iridium The reaction of (NH₄)₂[IrCl₆] with NH₄Cl at 300 °C in a sealed glass ampoule yields the iridium(III) ammine complex (NH₄)₂[Ir(NH₃)Cl₅], which crystallizes isotypically with K₂[Ir(NH₃)Cl₅] in the orthorhombic space group Pnma with Z = 4, and a = 1350.0(2); b = 1028.5(3); c = 689.6(2) pm. The reaction of (NH₄)₂[IrCl₆] with NH₃ at 300 °C, however, gives the already known [Ir(NH₃)₅Cl]Cl₂ beside a small amount of [Ir(NH₃)₄Cl₂]Cl₂. In pure form [Ir(NH₃)₅Cl]Cl₂ is obtained by ammonolysis of (NH₄)₂[Ir(NH₃)Cl₅] at 300 °C with NH₃. [Ir(NH₃)₄Cl₂]Cl₂ crystallizes triclinic (P1, Z = 1, a = 660,2(3); b = 680,4(3); c = 711,1(2) pm; α = 103,85(2)°, β = 114,54(3)°, γ = 112,75(2)°). The structure contains Cl^– anions and [Ir(NH₃)₄Cl₂]²⁺ cations with a trans position of the Cl atoms. Upon reaction of [Ir(NH₃)₅Cl]Cl₂ with Cl₂ one ammine ligand is eliminated yielding [Ir(NH₃)₄Cl₂]Cl, which is transformed to orthorhombic [Ir(NH₃)₄(OH₂)Cl]Cl₂ (Pnma, Z = 4, a = 1335,1(3); b = 1047,9(2); c = 673,4(2) pm) by crystallization from water. In the octahedral complex [Ir(NH₃)₄(OH₂)Cl]²⁺ the four ammine ligands have an equatorial position, whereas the Cl atom and the aqua ligand are arranged axial. Oxidation of (NH₄)₂[Ir(NH₃)Cl₅] with Cl₂ at 330 °C affords the tetragonal Ir^IV complex (NH₄)[Ir(NH₃)Cl₅] (P4nc, Z = 2, a = 702.68(5); c = 912.89(9) pm). Its structure was determined using the powder diagram. Oxidation of (NH₄)₂[Ir(NH₃)Cl₅] with Br₂ in water, on the other hand, gives (NH₄)₂[IrBr₆] crystallizing in the K₂[PtCl₆] type. Oxidation of (PPh₄)₂[Ir(NH₃)Cl₅] with PhI(OAc)₂ in CH₂Cl₂ affords the Ir^V amido complex (PPh₄)[Ir(NH₂)Cl₅].     

Isocyanide addition to MN2(CO)5(Ph2PCH2PPh2)2 and the formation of a four-electron doubly-bridging isocyanide

The reactions of Fe(CO)₅, Fe(CO)₄P(C₆H₅)₃, M(CO)₆ (M  W, Mo, Cr), and (CH₃C₅H₄Mn(CO)₃ with KH and several boron and aluminium hydrides were investigated. Iron pentacarbonyl was converted quantitatively to K⁺Fe(CO)₄-(CHO) by hydride transfer from KBH(OCH₃)₃ allowing isolation of [P(C₆H₅)₃]₂-Nⁿ⁺Fe(CO)₄(CHO)^? in 50% yield. Lower yields were obtained with LiBH(C₂H₅)₃, and other hydride sources gave little or no formyl product. The stability of Fe(CO)₄(CHO)^? in THP was found to depend on the cation, decreasing in the order [P(C₆H₅)₃]₂N⁺ > K⁺ > Na⁺ > Li⁺. No formyl complexes were isolated and no spectroscopic evidence for formyl formation was observed in the reactions of the other transition metal carbonyls with several hydride sources. Fe(CO)₄-P(C₆H₅)₃ gave K₂Fe(CO)₄ when treated with KHB(OCH₃)₃. When treated with LiBH(C₂H₅)₃, W(CO)₆ gave a mixture of HW₂(CO)₁₀^?and (OC)₅W(COC₂H₅)^?; the latter was methylated to give the carbene complex (OC)₅WC(OCH₃)C₂H₅.     

Einfache Trithio- und Perthiocarbonatokomplexe mit interessanter Koordinationschemie: [E(CS3)2]2− (E = Sn,Zn, Cd), [E(CS3)3]3− (E = As,Sb, Bi,Co), {Cu(CS3)−}∞ und [Zn(CS4)2]2−

Simple Trithio- and Perthiocarbonato Complexes with Interesting Bond Properties: [E(CS₃)₂]^2? (E = Sn, Zn, Cd), [E(CS₃)₃]^3? (E = As, Sb, Bi, Co), {Cu(CS₃)^?}_∞ and [Zn(CS₄)₂]^2? By reactions of potassium trithiocarbonate ( 1 ) with solutions of zinc(II)- acetylacetonate, cadmium(II)-chloride, tin(II)-chloride, arsenic(III)-sulfide (suspension), antimony(III)-chloride, bismuth(III)-chloride and copper(II)-chloride in dimethyl sulfoxide, as well as of trisodium hexanitrito cobaltate(III) in water, and the precipitation of the complexes with an aqueous solution of tetraphenylphosphonium chloride the compounds (PPh₄)₂[Zn(CS₃)₂] ( 2 ), (PPh₄)₂[Cd(CS₃)₂] ( 3 ), (PPh₄)₂[Sn(CS₃)₂] ( 4 ), (PPh₄)₃[As(CS₃)₃] ( 5 ), (PPh₄)₃[Sb(CS₃)₃] ( 6 ), (PPh₄)₃[Bi(CS₃)₃] ( 7 ), (PPh₄)₃[Co(CS₃)₃] ( 8 ) and (PPh₄)Cu(CS₃) ( 9 ) have been isolated. (PPh₄)₂[Zn(CS₄)₂] · CH₃NO₂ ( 10 ) has been prepared by heating a solution of 2 in nitromethane to 60--70°C in presence of air. The reaction of 1 in dimethyl sulfoxide with an aqueous tetraphenylphosphonium chloride solution in presence of oxygen leads to (PPh₄)₂[C₂S₆] ( 11 ). The compounds have been characterized by spectroscopical studies (IR, Raman, UV/Vis, ¹¹³Cd/⁵⁹Co-NMR), magnetic susceptibility measurements, powder diffractometry, elemental analyses and single crystal X-ray structure analysis ( 4 – 7 , 10 and 11 ). The difficult growing of single crystals has been reported in detail. For crystal data see Inhaltsübersicht.     

PREPARATION AND PROPERTIES OF DIAZENIDO,HYDRAZIDO(2-), AND HYDRIDO-HYDRAZIDO(2-) COMPLEXES OF TUNGSTEN. X-RAY PHOTOELECTRON SPECTROSCOPY OF DINITROGEN AND HYDRAZIDO(2-) COMPLEXES OF MOLYBDENUM AND TUNGSTEN

Abstract

Reactions of HBr with trans-[W(N₂)₂(dppe)PPh₂Me)₂] (1) (dppe = Ph₂CH₂CH₂PPh₂) result in protonation of coordinated N₂ but no formation of ammonia or hydrazine. The tungsten-containing product depends upon the reaction conditions: (i) in MeOH, the product formed is [WBr(NNH₂) (dppe)(PPh₂Me)₂]HBr₂ (2) which converts to the hydride, [WBr₂(H)(NNH₂(dppe)(PPh₂Me)](Br(3), with loss of phosphine in THF or CH₂Cl₂, (ii) in THF or CH₂Cl₂, the hydride (3) is formed directly. Reaction of 2 with Na₂CO₃ in MeOH results in the loss of HBr and the formation of the diazenido complex [WBr(NNH)(dppe)(PPh₂Me)₂] which reacts further with Na₂CO₃ in benzene under N₂ to lose HBr and form a mixture of 1 and trans-[W(N₂)(dppe)₂]. The reaction of 1 with aqueous HF forms [WF(NNH₂)(dppe)(PPh₂Me)₂]BF₄. The X-ray photoelectron spectra of trans-[M(N₂)₂ (dppe)₂], [MBr(NNH₂)(dppe)₂Br (M = Mo, W), [WCl(NNH₂)(dppe)₂]Cl, [WCl(N)(dppe)₂]Cl and [WCl(NH) (dppe)₂] are reported. In all of these complexes, nitrogen is in a highly reduced form.     

Water‐soluble and Halogen‐free Hexaammine Complexes of Metal Ions of Group 9 – Synthesis,Crystal Structures,and Vibrational Spectra

Reaction of [M(NH₃)₆]Cl₃ (M = Co, Rh, Ir) and [Ir(NH₃)₅(OH₂)]Cl₃ with (NH₄)₂C₂O₄ · H₂O in aqueous solution resulted in the isolation of [M(NH₃)₆]₂(C₂O₄)₃ · 4 H₂O and [Ir(NH₃)₅(OH₂)]₂(C₂O₄)₃ · 4 H₂O, respectively. The complexes have been characterized by X‐ray crystallography, IR and UV/VIS spectroscopy. The isomorphous compounds crystallize in the orthorhombic space group Pnnm (No. 58). Four molecules of crystal water are involved in an extended three‐dimensional hydrogen bonding network. The librational modes of the lattice water around 600 cm^–1 allow the characterization of [Ir(NH₃)₆]₂(C₂O₄)₃ · 4 H₂O and [Ir(NH₃)₅(OH₂)]₂(C₂O₄)₃ · 4 H₂O, respectively, by IR spectroscopy. The band around 600 cm^–1 shows a significant frequency shift in the IR spectra of the hexaammine and aquapentaammine complex of iridium(III) and, by that, a distinction is possible.     

Fluorinated phosphorus compounds: Part 6. The synthesis of bis(fluoroalkyl) phosphites and bis(fluoroalkyl) phosphorohalidates

Reaction of phosphorus trichloride with tert-butanol and fluoroalcohols gave bis(fluoroalkyl) phosphites (R_FO)₂P(O)H in 42-89% yield, where R_F=HCF₂CH₂, H(CF₂)₂CH₂, H(CF₂)₄CH₂, CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH, CF₃(CH₃)₂C, (CF₃)₂CH₃C, CF₃CH₂CH₂, C₄F₉CH₂CH₂ and C₆F₁₃CH₂CH₂. Treatment of these with chlorine in dichloromethane gave the bis(fluoroalkyl) phosphorochloridates (R_FO)₂P(O)Cl in 49-96% yield. The chloridate (CF₃CH₂O)₂P(O)Cl was isolated in much lower yield from the interaction of thionyl chloride with bis(trifluoroethyl) phosphite. Heating the latter in dichloromethane with potassium fluoride and a catalytic amount of trifluoroacetic acid gave the corresponding fluoridate (CF₃CH₂O)₂P(O)F in 84% yield. Treatment of bis(trifluoroethyl) phosphite with bromine or iodine gave the bromidate (CF₃CH₂O)₂P(O)Br and iodidate (CF₃CH₂O)₂P(O)I in 51 and 46% yield, respectively. The iodidate is the first dialkyl phosphoroiodidate to have been isolated and characterised properly—its discovery lags behind the first isolation of a dialkyl phosphorochloridate by over 130 years. The fluoroalkyl phosphoryl compounds are generally more stable than known unfluorinated counterparts.     

Synthesis and characterization of organotin complexes with dithiocarbamates and crystal structures of (4‐NCC6H4CH2)2Sn(S2CNEt2)2 and (2‐ClC6H4CH2)2 Sn(Cl)S2CNBz2

Ten organotin derivatives with dithiocarbamates of the formulae (4‐NCC₆H₄CH₂)₂Sn(S₂CNEt₂)₂ (1), (4‐NCC₆H₄CH₂)₂Sn(S₂CNBz₂)₂ (2), (4‐NCC₆H₄CH₂)₂Sn[S₂CN(CH₂CH₂)₂NCH₃]₂ (3), (2‐ClC₆H₄CH₂)₂ Sn(S₂CNEt₂)₂ (4), (2‐ClC₆H₄CH₂)₂Sn(S₂CNBz₂)₂ (5), (4‐NCC₆H₄CH₂)₂Sn(Cl)S₂CNEt₂ (6), (4‐NCC₆H₄CH₂)₂Sn(Cl)S₂CNBz₂ (7), (4‐NCC₆H₄CH₂)₂Sn(Cl)S₂CN(CH₂CH₂)₂NCH₃ (8), (2‐ClC₆H₄CH₂)₂ Sn(Cl)S₂CNEt₂ (9) and (2‐ClC₆H₄CH₂)₂Sn(Cl)S₂CNBz₂ (10) have been prepared. All complexes were characterized by elemental analyses, IR and NMR. The crystal structures of complexes 1 and 10 were determined by X‐ray single crystal diffraction. For complex 1, the central tin atom exists in a skew‐trapezoidal planar geometry defined by two asymmetrically coordinated dithiocarbamate ligands and two 4‐cyanobenzyl groups. In addition, because of the presence of close intermolecular non‐bonded contacts, complex 1 is a weakly‐bridged dimer. In complex 10, the central tin atom is rendered pentacoordinated in a distorted trigonal bipyramidal configuration by coordinating with S atoms derived from the dithiocarbamate ligand. In vitro assays for cytotoxicity against five human tumor cell lines (MCF‐7, EVSA‐T, WiDr, IGROV and M226) furnished the significant toxicities of the title complexes. Copyright © 2006 John Wiley & Sons, Ltd.     

An unusual organoyttrium alkyl complex containing a [C5HMe3(η(3)-CH2)-C5H4N-κ]- ligand and an elusive cyclopentadienide-based scandium tuck-over zwitterion obtained by C-H bond activation

The acid–base reaction between Y(CH₂SiMe₃)₃(thf)₂ and the pyridyl‐functionalized cyclopentadienyl (Cp) ligand C₅Me₄H? C₅H₄N (1 equiv) at 0 °C afforded a mixture of two products: (η⁵:κ‐C₅Me₄? C₅H₄N)Y(CH₂SiMe₃)₂(thf) ( 1 a ) and (η⁵:κ‐C₅Me₄? C₅H₄N)₂YCH₂SiMe₃ ( 1 b ), in a 5:2 ratio. Addition of the same ligand (2 equiv) to Y(CH₂SiMe₃)₃(thf)₂, however, generated 1 b together with the novel complex 1 c , the first well defined yttrium mono(alkyl) complex (η⁵:κ‐C₅Me₄? C₅H₄N)[C₅HMe₃(η³‐CH₂)‐C₅H₄N‐κ]Y(CH₂SiMe₃) containing a rare κ/η³‐allylic coordination mode in which the C? H bond activation occurs unexpectedly with the allylic methyl group rather than conventionally on Cp ring. If the central metal was changed to lutetium, the equimolar reaction between Lu(CH₂SiMe₃)₃(thf)₂ and C₅Me₄H? C₅H₄N exclusively afforded the bis(alkyl) product (η⁵:κ‐C₅Me₄? C₅H₄N)Lu(CH₂SiMe₃)₂(thf) ( 2 a ). Similarly, the reaction between the ligand (2 equiv) and Lu(CH₂SiMe₃)₃(thf)₂ gave the mono(alkyl) complex (η⁵:κ‐C₅Me₄? C₅H₄N)₂LuCH₂SiMe₃ ( 2 b ), in which no ligand redistribution was observed. Strikingly, treatment of Sc(CH₂SiMe₃)₃(thf)₂ with C₅Me₄H? C₅H₄N in either 1:1 or 1:2 ratio at 0 °C generated the first cyclopentadienide‐based scandium zwitterionic “tuck‐over” complex 3 , (η⁵:κ‐C₅Me₄? C₅H₄N)Sc(thf)[μ‐η⁵:η¹:κ‐C₅Me₃(CH₂)‐C₅H₄N]Sc(CH₂SiMe₃)₃. In the zwitterion, the dianionic ligand [C₅Me₃(CH₂)‐C₅H₄N]^2? binds both to Sc1³⁺ and to Sc2³⁺, in η⁵ and η¹/κ modes. In addition, the reaction chemistry, the molecular structures, and the mechanism are also discussed in detail.     

Strukturen von Bis(trifluormethyl)halogeno‐ und ‐thiocyanato‐mercuraten, [Hg(CF3)2X]— (X = Br,I, SCN), und ein Vergleich der Strukturparameter der CF3‐Gruppen

Structures of Bis(trifluoromethyl)halogeno and thiocyanato Mercurates, [Hg(CF₃)₂X]^— (X = Br, I, SCN), and a Comparison of the Structural Parameters of the CF₃ Groups [(18‐C‐6)K]₂[Hg(CF₃)₂SCN]₂ (1) and [P(CH₃)(C₆H₅)₃]₂[Hg(CF₃)₂X]₂ (X = Br (2) , I (3) ) are prepared and their crystal structures are determined. [(18‐C‐6)K]₂[Hg(CF₃)₂SCN]₂ (1) crystallizes in the monoclinic space group P2₁/c with Z = 2, [P(CH₃)(C₆H₅)₃]₂[Hg(CF₃)₂Br]₂ (2) in the monoclinic space group P2₁/n with Z = 2 and [P(CH₃)(C₆H₅)₃]₂[Hg(CF₃)₂I]₂ (3) in the triclinic space group P1¯ with Z = 1. In the solid state the three compounds form dimeric anions with planar Hg₂X₂ rings. The structural parameters of the Hg(CF₃)₂ units in the till now known bis(trifluoromethyl)halogeno mercurates are compared. In all compounds one nearly symmetric and one distorted CF₃ group exist. The largest differences of the C—F bond lengths is found for [(18‐C‐6)K][Hg(CF₃)₂I]. This can be regarded as the experimental evidence for the properties of trifluoromethyl mercury compounds to act as excellent difluorocarbene sources in the presence of alkali iodides.     

Phosphino[tris(trimethylsilyl)methyl]Boranes and 2,4‐Bis[tris(trimethylsilyl)methyl]‐1,3,2,4‐diphosphadiboretanes [1]

The reaction of tris(trimethylsilyl)methylboron dihalides (Me₃Si)₃CBX₂ (X = Cl, F) with the lithium phosphides LiPHtBu and LiPHmes leads to the phosphinoboranes (Me₃Si)₃CBX‐(PHR), (Me₃Si)₃CB(PHR)₂ or the 1,3,2,4‐diphosphadiboretanes [(Me₃Si)₃CB(PR)]₂, depending on the ratio of the reagents, the reaction temperature and concentration. High dilution and low temperatures are required for the synthesis of (Me₃Si)₃CB(Hal)PHR ( 1–3 ) in order to prevent the formation of (Me₃Si)₃CB(PHR)₂ ( 4 and 5 ). The latter compounds are best prepared in a two step phosphination from (Me₃Si)₃CBHal₂ and LiPHR. At higher temperatures the four‐membered 1,3,2,4‐diphosphadiboretanes [(Me₃Si)₃CB(PR)]₂ 6 and 7 are the most stable compounds. On the other hand, compounds of type (Me₃Si)₃CB(Hal)PR₂, 8 and 9 , are thermally more stable than the monophosphinoboranes 1 – 3 . Phosphinoboranes of type (Me₃Si)₃CB(PR₂)₂ (R = tBu, mes) could not be prepared. NMR and mass spectral data are in accord with the monomeric nature of compounds 1 to 9 .     

Organotin and tin(IV) derivatives of dimethyldithioarsinic acid

Organotin derivatives of dimethyldithioarsinic (dithocacodylic) acid have been obtained from the appropriate organotin chloride and the sodium salt of the latter. Tin(IV) chloride and NaS₂AsMe₂ · 2 H₂O yielded only two products, namely Cl₂Sn(S₂AsMe₂)₂ and Sn (S₂AsMe₂)₄, regardless of the reagent ratio. Spectroscopic characterization of the compounds (infrared and¹H NMR) provides structural information suggesting that the dimethyldithioarsinato group behaves as monodentate (or anisobidentate) ligand in Me₂Sn(S₂AsMe₂)₂, Bu₂Sn-(S₂AsMe₂)₂ and Cy₃Sn(S₂AsMe₂), as bidentate in Ph₂Sn(S₂AsMe₂)₂, Ph₃Sn(S₂AsMe₂) and Cl₂As(S₂AsMe₂)₂, whereas Sn(S₂AsMe₂)₄ contains both mono- and bidentate ligands, presumably in a six-coordinate structure.     

Syntheses and Characterizations of Novel One-dimensional Coordination Polymers Self-assembled from Co(NCS)_2 and Flexible Diester-bridged Pyridine-based Ligands

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｒｅｈａｓｂｅｅｎｒｅｃｅｎｔｒｅｓｅａｒｃｈｉｎｔｅｒｅｓｔｉｎｃｒｙｓｔａｌｅｎ ｇｉｎｅｅｒｉｎｇａｎｄｔｈｅｄｅｓｉｇｎｏｆｓｕｐｒａｍｏｌｅｃｕｌａｒａｒｃｈｉｔｅｃｔｕｒｅｓ .1Ｂｙｓｅｌｅｃｔｉｎｇｔｈｅｃｈｅｍｉｃａｌｓｔｒｕｃｔｕｒｅｏｆｌｉｇａｎｄｓａｎｄｔｈｅｃｏ ｏｒｄｉｎａｔｉｏｎｇｅｏｍｅｔｒｙｏｆｔｒａｎｓｉｔｉｏｎｍｅｔａｌｉｏｎｓ ,ｔｈｅｏｒｇａｎｉｃ/ｉｎｏｒｇａｎｉｃｈｙｂｒｉｄｍａｔｅｒｉａｌｓｍａｙｙｉｅｌｄａｓｅｒｉｅｓｏｆｎ…     

Tri(1-cyclohepta-2,4,6-trienyl)phosphan,P(C7H7)3 und Tetra(1-cyclohepta-2,4,6-trienyl)phosphonium-tetrafluoroborat, [P(C7H7)4]BF4

Tri(1-cyclohepta-2,4,6-trienyl)phosphane, P(C₇H₇)₃, and Tetra(1-cyclohepta-2,4,6-trienyl)phosphonium Tetrafluoroborate, [P(C₇H₇)₄]BF₄ The reaction of tris(trimethylsilyl)phosphane, P(SiMe₃)₃, with tropylium bromide, C₇H₇⁺Br^?, in polar solvents such as dichloromethane or tetrahydrofuran gives P(C₇H₇)₃ ( 1 ) and [P(C₇H₇)₄]Br ( 2a ). According to the X-ray crystallographic structure determinations, all 1-cyclohepta-2,4,6-trienyl substituents are present in the boat conformation in both P(C₇H₇)₃ ( 1 ) and the phosphonium salt, [P(C₇H₇)₄]BF₄ ( 2b ). The boat-shaped C₇H₇ rings are significantly more flattened if the phosphorus occupies the axial rather than the equatorial position at the ring substituent. Addition of a chalcogen to the lone pair at the central phosphorus atom of 1 leads to the chalcogena-phosphoranes EP(C₇H₇)₃ (E = O ( 3a ), S ( 3b ), Se ( 3c )). The new 1-cyclohepta-2,4,6-trienyl-phosphorus compounds 1, 2 b and 3a–c were characterized by their ¹H, ¹³C, and ³¹P NMR spectra in C₆D₆ solution.     

3D Uranyl Organic Frameworks Supported by Rigid Octadentate Carboxylate Ligand: Synthesis,Structure Diversity,and Luminescence Properties

Seven three dimensional (3D) uranyl organic frameworks (UOFs), formulated as [NH₄][(UO₂)₃(HTTDS)(H₂O)] ( 1 ), [(UO₂)₄(HTTDS)₂](HIM)₆ ( 2 , IM=imidazole), [(UO₂)₄(TTDS)(H₂O)₂(Phen)₂] ( 3 , Phen=1,10-phenanthroline), [Zn(H₂O)₄]_0.5[(UO₂)₃(HTTDS)(H₂O)₄] ( 4 ), and {(UO₂)₂[Zn(H₂O)₃]₂(TTDS)} ( 5 ), {Zn(UO₂)₂(H₂O)(Dib)_0.5(HDib)(HTTDS)} ( 6 , Dib=1,4-di(1H-imidazol-1-yl)benzene) and [Na]{(UO₂)₄[Cu₃(u₃-OH)(H₂O)₇](TTDS)₂} ( 7 ) have been hydrothermally prepared using a rigid octadentate carboxylate ligand, tetrakis(3,5-dicarboxyphenyl)silicon(H₈TTDS). These UOFs have different 3D self-assembled structures as a function of co-ligands, structure-directing agents and transition metals. The structure of 1 has an infinite ribbon formed by the UO₇ pentagonal bipyramid bridged by carboxylate groups. With further introduction of auxiliary N-donor ligands, different structure of 2 and 3 are formed, in 2 the imidazole serves as space filler, while in 3 the Phen are bound to [UO₂]²⁺ units as co-ligands. The second metal centers were introduced in the syntheses of 4–7 , and in all cases, they are part of the final structures, either as a counterion ( 4 ) or as a component of framework ( 5 − 7 ). Interesting, in 7 , a rare polyoxometalate [Cu₃(μ₃-OH)O₇(O₂CR)₄] cluster was found in the structure. It acts as an inorganic building unit together with the dimer [(UO₂)₂(O₂CR)₄] unit. Those uranyl carboxylates were sufficiently determined by single crystal X-ray diffraction, and their topological structures and luminescence properties were analyzed in detail.     

Synthese und Kristallstrukturen von (NEt4)2[TeS3], (NEt4)2[Te(S5)(S7)] und (NEt4)4[Te(S5)2][Te(S7)2]

Synthesis and Crystal Structures of (NEt₄)₂[TeS₃], (NEt₄)₂[Te(S₅)(S₇)], and (NEt₄)₄[Te(S₅)₂][Te(S₇)₂] (NEt₄)₂[TeS₃] was obtained by the reaction of NEt₄Cl, Na₂S₄ and tellurium in acetonitrile. It reacts with sulfur, yielding (NEt₄)₂[Te(S₅)(S₇)], which is transformed to (NEt₄)₄[Te(S₅)₂][Te(S₇)₂] by recrystallization from hot acetonitrile. According to the X-ray structure analysis, crystals of (NEt₄)₂[TeS₃] are monoclinic (space group P2₁/c) and form twins with the twinning plane (001); they contain pyramidal TeS₃^2– ions. (NEt₄)₂[Te(S₅)(S₇)] forms triclinic twins (space group P1) with the twinning plane (010). In the [Te(S₅)(S₇)]^2– ion an S₅ and an S₇ atom group are bonded in a chelate manner to the tellurium atom, which has square coordination. (NEt₄)₄[Te(S₅)₂][Te(S₇)₂] (monoclinic, space group P2₁/c) contains two kinds of anions, the known [Te(S₅)₂]^2– and the new [Te(S₇)₂]^2– ion which has two S₇ chelating groups.     

N-Silylierung und Si?O-Bindungsspaltung bei der Reaktion lithiierter Siloxy-silylamino-silane mit Chlortrimethylsilan

N-Silylation and Si? O Bond Splitting at the Reaction of Lithiated Siloxy-silylamino-silanes with Chlorotrimethylsilane Lithiated Siloxy-silylamino-silanes were allowed to react in tetrahydrofurane (THF) and in n-octane (favoured) and n-hexane, resp., with chlorotrimethylsilane. The monoamide (Me₃SiO)Me₂Si(NLiSiMe₃) gives in THF and in n-octane the N-substitution product (Me₃SiO)Me₂Si · [N(SiMe₃)₂] 1 , the diamide (Me₃SiO)MeSi(NLiSiMe₃)₂ only in THF the N-substitution products (Me₃SiO)MeSi[N(SiMe₃)₂]₂ 2 (main product) and (Me₃SiO)MeSi[N(SiMe₃)₂](NHSiMe₃) 3 . In n-octane the diamide reacts mainly under Si? O bond splitting. The cyclodisilazane [(Me₃SiNH)MeSi? NSiMe₃]₂ 6 is obtained as the main product. Byproducts are 2, 3 and the tris(trimethylsilylamino) substituted disilazane (Me₃SiO)(Me₃SiNH)MeSi? N · (SiMe₃)? SiMe(NHSiMe₃)₂ 7 . The triamide (Me₃SiO)Si · (NLiSiMe₃)₃ reacts under Si? O and Si? N bond splitting in n-octane as well as in THF. The cyclodisilazanes [(Me₃SiNH)₂ · Si? NSiMe₃]₂ 10 and ( 11 : R = Me₃SiNH, 12 : R = (Me₃Si)₂N) are formed. in THF furthermore the N-substitution products (Me₃SiO)Si[N(SiMe₃)₂] · (NHSiMe₃)₂ 4 and (Me₃SiO)Si[N(SiMe₃)₂]₂(NHSiMe₃) 5 . The Si? O bond splitting occurs in boiling n-octane also in absence of the chlorotrimethylsilane. An amide solution of (Me₃SiO)MeSi(NHSiMe₃)₂ with n-butyllithium in the molar ratio 1 : 1 leads in n-octane and n-hexane to 6 and 7 , in THF to 3 . The amide solutions of (Me₃SiO)Si · (NHSiMe₃)₃ with n-butyllithium the molar ratio 1 : 1 and 1 : 2 give in THF 4 and 5 , respectively.     

Der Einfluß der Koordinationssphäre von Samarocenen auf die Synthese von flüssigkristallinen Polymethacrylaten

The Influence of the Coordination Sphere of Samarocenes on the Synthesis of Liquid Crystalline Polymethacrylates (C₅Me₅)₂Sm(THF)₂ ( 1 ) reacts with 1,3‐Diisopropyl‐4,5‐dimethylimidazoline‐2‐ylidene C₃N₂Me₂iPr₂ (iPr‐carben) with formation of (C₅Me₅)₂Sm(iPr‐carben) ( 3 ). The reaction of (C₅Me₄Et)₂Sm(THF)₂ ( 2 ) with Al₂Me₆ in toluene yields [(C₅Me₄Et)₂Sm(CH₃)Al(CH₃)₃]₂ ( 6 ). 3 and 6 were characterized by single crystal X‐ray structure analysis. Via living polymerization of mesogenic methacrylates with the organosamarium complexes 1 , 2 , 3 , (C₅Me₅)₂Sm(C₃H₅) ( 4 ), (C₅Me₅)₂Sm(CH₃)(THF) ( 5 ), 6 , and (C₅Me₄Et)₂SmCH(SiMe₃)₂ ( 7 ), liquid crystalline homo‐ and blockcopolymers were obtained with narrow molecular mass distribution indexes in high yield. Partial competitive mechanisms are observed dependend of the structure of the catalyst and the polarity of the solvents.     

Gold(I) and Silver(I) Complexes of Diphosphacyclobutadiene Cobaltate Sandwich Anions

The synthesis and structural characterization of the first coordination compounds of bis(diphosphacyclobutadiene) cobaltate anions [M(P₂C₂R₂)₂]^? is described. Reactions of the new potassium salts [K(thf)₃{Co(η⁴‐P₂C₂tPent₂)₂}] ( 1 ) and [K(thf)₄{Co(η⁴‐P₂C₂Ad₂)₂}] ( 2 ) with [AuCl(tht)] (tht=tetrahydrothiophene), [AuCl(PPh₃)] and Ag[SbF₆] afforded the complexes [Au{Co(P₂C₂tPent₂)₂}(PMe₃)₂] ( 3 ), [Au{Co(P₂C₂Ad₂)₂}]_x ( 4 ), [Ag{Co(P₂C₂Ad₂)₂}]_x ( 5 ), [Au(PMe₃)₄][Au{Co(P₂C₂Ad₂)₂}₂] ( 6 ), [K([18]crown‐6)(thf)₂][Au{Co(P₂C₂Ad₂)₂}₂] ( 7 ), and [K([18]crown‐6)(thf)₂][M{Co(P₂C₂Ad₂)₂}₂] ( 8 : M=Au 9 : M=Ag) in moderate yields. The molecular structures of 2 and 3 , and 6 – 9 were elucidated by X‐ray crystallography. Complexes 4 – 9 were thoroughly characterized by ³¹P and ¹³C solid state NMR spectroscopy. The complexes [Au{Co(P₂C₂Ad₂)₂}]_x ( 4 ) and [Ag{Co(P₂C₂Ad₂)₂}]_x ( 5 ) exist as coordination polymers in the solid state. The linking mode between the monomeric units in the polymers is deduced. The soluble complexes 1 – 3 , 6 , and 7 were studied by multinuclear ¹H‐, ³¹P{¹H}‐, and ¹³C{¹H} NMR spectroscopy in solution. Variable temperature NMR measurements of 3 and 6 in deuterated THF reveal the formation of equilibria between the ionic species [Au(PMe₃)₄]⁺, [Au(PMe₃)₂]⁺, [Co(P₂C₂R₂)₂]^?, and [Au{Co(P₂C₂R₂)₂}₂]^? (R=tPent and Ad).     

Chemie polyfunktioneller liganden LXIII. Adamantankäfigverbindungen mit den heteroelementen arsen,stickstoff und silizium

The reaction of 1,1,1-tris(diiodarsinomethyl)ethane, CH₃C(CH₂AsI₂)₃ (I), with i-C₃H₇NH₂, n-C₄H₉NH₂, C₆H₅NH₂, p-CH₃C₆H₄NH₂ and [(CH₃)₃Si]₂NH in the presence of (C₂H₅)₃N as auxiliary base in THF gives the adamantane cage compounds CH₃C(CH₂AsNC₃H₇)₃ (III), CH₃C(CH₂AsNC₄H₉)₃ (IV), CH₃C(CH₂AsNC₆H₅)₃ (V), CH₃C(CH₂AsNC₆H₄CH₃)₃ (VI) and CH₃C[CH₂AsNSi(CH₃)₃]₃ (VII). VII is also obtained in the reaction of I with NaN[Si(CH₃)₃]₂. The by-product (CH₃)₃SiO(CH₂)₄I (VIII) could be isolated in both syntheses of VII. All compounds have been characterized by mass spectrometry and infrared, Raman and ¹H NMR spectroscopy.     

Dimethylphosphinato and dimethylarsinato complexes of Sb(III) and Bi(III) and their chemistry

Abstract  

The reaction of Me₂PO₂H and Me₂AsO₂H with SbCl₃, BiCl₃, and Bi(NO₃)₃·5H₂O gave the complexes Sb(Me₂PO₂)₃, Sb(Me₂AsO₂)₃, (Me₂PO₂)₂Bi-Cl, Bi(Me₂AsO₂)₃, (Me₂PO₂)₂Bi(NO₃), and (Me₂AsO₂)₂Bi(NO₃)·H₂O, respectively. The arsinato complexes did not react with the Lewis bases pyridine, Ph₃P, and Ph₃As in acetone. The compounds Sb(Me₂AsO₂)₃ and (Me₂AsO₂)₂Bi(NO₃)·H₂O reacted to a small extent with nicotinic acid in methanol but Bi(Me₂AsO₂)₃ gave (Me₂AsO₂-BiO) _x in good yields. (Me₂AsO₂)₂Bi(NO₃)·H₂O in methanol quantitatively rearranged to new complexes with the same composition, [(Me₂AsO₂)₂Bi(NO₃)·H₂O]′ and [(Me₂AsO₂)₂Bi(NO₃)·H₂O]″ in the presence of pyridine. With thiophenol in air, Sb(Me₂AsO₂)₃ gave PhSSPh and Me₂As-SPh (1:1 mol ratio), (Me₂AsO₂-SbO) _x and some Sb(Me₂AsO₂)₃ was reformed, Bi(Me₂AsO₂)₃ gave (Me₂AsO₂-BiO) _x , PhSSPh, and Me₂As-SPh (1:0.6 mol ratio), whereas (Me₂AsO₂)₂Bi(NO₃)·H₂O quantitatively gave PhSSPh, thus acting as a catalyst for the air oxidation of thiophenol.