The synthesis of functional derivatives of the [1-CB9H10] anion by Brellochs reaction

Reactions of decaborane with various aldehydes in alkaline media were studied. The reactions with HCOH and 2-MeOC₆H₄CHO give the corresponding arachno-carboranes [6-R-arachno-CB₉H₁₃]⁻ (R = H, C₆H₄-2-OMe), whereas the reactions with C₆H₅CHO, 4-BrC₆H₄CHO, 4-MeCONHC₆H₄CHO, and 2-SC₄H₃CHO result in the nido-carboranes [6-R-nido-CB₉H₁₁]⁻ (R = C₆H₅, C₆H₄-4-Br, C₆H₄-4-NHCOMe, 2-SC₄H₃). Both the arachno- and nido-carboranes can be easily oxidized with elemental iodine in an alkaline aqueous solution giving the corresponding closo-derivatives [2-R-closo-2-CB₉H₉]⁻. These closo-2-isomers, under heating in solution, undergo rearrangement to more thermodynamically favorable closo-1-isomers [1-R-closo-1-CB₉H₉]⁻. The structure of (Bu₄N)[1-(4-BrC₆H₄)-1-CB₉H₉] was determined using single crystal X-ray diffraction.     

The preparation of [closo-1-CB9H8-1-COOH-10-(4-C3H7C5H9S)] as intermediate to polar liquid crystals

The preparation of iodo acid [closo-1-CB₉H₈-1-COOH-10-I]⁻ (1) is optimized and scaled from 1 to 40 g of B₁₀H₁₄. The improved preparation of the [arachno-6-CB₉H₁₃-6-COOH]⁻ (5) uses four times smaller volume and can be run conveniently in up to 40 g scale in a 3-L vessel. The optimized oxidation of 5 to [closo-2-CB₉H₉-2-COOH]⁻ (4) requires less oxidant, 12 times smaller volume, and significantly shorter reaction time. The overall yields of the iodo acid 1 as the [NMe₄]⁺ salt are typically 8-10% (10-12 g) for 40 g of B₁₀H₁₄. The iodo acid 1 was transformed to amino acid 8, then to dinitrogen acid 10, and finally to sulfonium acid 2[3] in overall yield of about 13%. The search for a more efficient phosphine ligand for the Pd-catalyzed amination process was not fruitful. Three routes to the sulfonium acid 2[n] were investigated, and the best yield of about 47% was obtained for Cs₂CO₃-assisted cycloalkylation. Liquid crystalline ester of acid 2[3] and 4-butoxyphenol was prepared and investigated.     

Ionic organoboranes. Part 8: the nature of the face hydrogens of [7.11]-nido-(12)-7,8-dicarbahemiousene (C7H6-B9C2H11) and B11H12

An ab initio molecular orbital study shows that the face hydrogen of the zwitterionic hemiousene [7.11¹]-nido-(12)-7,8-dicarbahemiousene (C₇H₆⁺-B₉C₂H₁₁⁻) is in a fluxional double minimum. It is primarily associated with B10 and forms unsymmetrical three-center bridges between B10-B9 or B10-B11. The transition barrier is about 2.5 kcal mol⁻¹. This structure is similar to that of the unsubstituted C₂B₉H₁₂⁻ ion and demonstrates that the cationic tropyliumyl substituent has little effect on the face. The hypothetical completely symmetrical ion B₁₁H₁₂³⁻ does not have a centered face hydrogen. The hydrogen is involved in a short, symmetrical bridge between face borons, and would be presumably fully fluxional in solution.     

Polyhedral monocarbaborane chemistry : Reactions of the [6-Ph-nido-6-CB9H11] anion with two-electron donors to yield a series of neutral arachno and closo ten-vertex monocarbaborane derivatives

Reaction of the ten-vertex [6-Ph-nido-6-CB₉H₁₁]⁻ anion (1) with two-electron donor ligands L, where L is SMe₂, NH₂Ph, NC₅H₅, NC₅H₄-para-CH₂Ph, NC₅H₄-para-Ph or NC₉H₇ (where NC₉H₇ is quinoline) in the presence of {FeCl₃(OH₂)₆} gives the six neutral arachno ten-vertex monocarbaboranes [6-Ph-9-L-arachno-6-CB₉H₁₂], compounds 2, 3, 4, 7, 9 and 11, respectively, isolatable in yields of up to 63%. On prolonged treatment with {FeCl₃(OH₂)₆} oxidative cluster closure of the four compounds 4, 7, 9 and 11 that have pyridine-type ligands gives the neutral closo ten-vertex monocarbaboranes [1-Ph-6-L-closo-1-CB₉H₈], compounds 6, 8, 10 and 12, respectively, in yields of 49-92%. All new species 2, 3, 4, 6, 7, 8, 9, 10, 11 and 12 are characterised by single-crystal X-ray diffraction analysis and NMR spectroscopy. [This paper is an annotated exposition of parts of an oral presentation at the Third Pan-European Meeting of Boron Chemists, EUROBORON-3, Pruhonice, The Czech Republic, September 2004, of which the proceedings constitute this volume of Journal of Organometallic Chemistry.]     

Synthesis and X-ray structural characterization of the triphenylphosphine derivative of the closo-dodecaborate anion, closo-[B12H11P(C6H5)3][N(n-C4H9)4]

The reaction of a molar excess of closo-[B₁₂H₁₁I][N(n-C₄H₉)₄]₂ (1) with tetrakis(triphenylphosphine)palladium (0), Pd(0)L₄, yields to the formation of the title monoanionic compound, closo-[1-B₁₂H₁₁P(C₆H₅)₃][N(n-C₄H₉)₄] (2). The structure of 2 was determined by X-ray diffraction analysis performed on a single crystal. The mechanism of formation of 2 is also discussed. We suggested a two-step mechanism for the formation of 2 consisting in a oxidative addition of the palladium complex followed by a reductive elimination involving P(C₆H₅)₃ and assisted by Na₂CO₃. To our knowledge, this is the first example of monosubstitution of B₁₂ with formation of boron-phosphorus bond.     

Some electrophilic substitution reactions of closo-[1-CB11H12]− and one-boron insertion into nido-7-L-7-CB10H12 (L = H− or Me3N) compounds. Isolation of all three B-substituted closo-Me3N-1-CB11H11 derivatives

Electrophilic deuteration of closo-[1-CB₁₁H₁₂]⁻ in the DCl/D₂O system confirmed the expected order of reactivity on individual skeletal atoms, decreasing in the series B(12) > B(7–11) > B(2–6) > C(1). In contrast, electrophilic B-substitution of closo-[1-CB₁₁H₁₂]⁻ with H₂NOSO₃H is consistent with the preference of the B(7)-substitution to suggest a different mechanism for almost exclusive formation of 7-H₃N-closo-1-CB₁₁H₁₁. 7-Me₃N-closo-1-CB₁₁H₁₁ was isolated along with the remaining 2- and 12-Me₃N-1-CB₁₁H₁₁ isomers as side products of the thermal decomposition of [BH₂(NMe₃)₂]⁺[nido-7-CB₁₀H₁₃]⁻ at 270°C, which is inconsistent with a specific insertion of the BNMe₃ fragment into the open face of nido-[7-CB₁₀H₁₃]⁻. Nevertheless, clean ¹⁰B-insertion was observed in the reactions of Et₃N¹⁰BH₃ with both nido-[7-CB₁₀H₁₃]⁻ and 7-Me₃N-nido-7-CB₁₀H₁₂ to give respectively closo-[1-CB₁₁H₁₂]⁻ and [1-Me₂N-1-CB₁₁H₁₁]⁻ labelled by ¹⁰B exclusively at the B(2) site. Cage rearrangement was observed, however, in the reaction of 7-Me₃N-8-PhCH₂-nido-7-CB₁₀H₁₁ with Et₃NBH₃ under similar conditions to produce only the 1-Me₃N-7-PhCH₂-1-CB₁₁H₁₀ closo-isomer.     

N-arylammonio- and N-pyridinium-substituted derivatives of dodecahydro-closo-dodecaborate(2-)

We report two methods for preparing N-arylammonio, N-pyridyl and N-arylamino dodecaborates: heating of the tetrabutylammonium salt of dodecahydro-closo-dodecaborate(2-) with aryl and pyridyl amines, or nucleophilic attack of [closo-B₁₂H₁₁NH₂]²⁻ on a strongly deactivated aromatic system. With aryl amines we obtained [1-closo-B₁₂H₁₁N(R¹)₂C₆H₅]⁻ (R¹ = H, CH₃). With 4-(dimethylamino)pyridine, [1-closo-(B₁₂H₁₁NC₅H₄)-4-N(CH₃)₂]⁻, with a bond between the boron and the pyridinium nitrogen, was obtained. A presumable mechanism for this kind of reactions is reported. By nucleophilic substitution, two products, [1-closo-(B₁₂H₁₁NHC₆H₃)-3,4-(CN)₂]²⁻ and [1-closo-(B₁₂H₁₁NHC₆H₂)-2-(NO₂)-4,5-(CN)₂]²⁻, were formed with 4-nitrophthalonitrile and 1-chloro-2,4-dinitrobenzene gave [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻. For [1-closo-B₁₂H₁₁N(CH₃)₂C₆H₅]⁻ and [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻ single crystal X-ray structures were obtained.     

Synthesis of the 1-hydroxy-closo-decaborate anion [1-B10H9OH]

Reactions of the diazonium derivative of closo-decaborate anion with oxygen nucleophiles were studied. The reaction of [1-B₁₀H₉N₂]⁻ with hydroxide ion gives the corresponding hydroxy derivative [1-B₁₀H₉OH]²⁻ in high yield. The reactions with OR (R = Me, Et, i-Pr, Ph) result in mixture of [1-B₁₀H₉OR]²⁻ and [a²-B₂₀H₁₈]⁴⁻.     

Reactions of oxonium derivatives of [B12H12] with sulphur nucleophiles. Synthesis of novel B12-based mercaptanes, sulfides and nucleosides

Cleavage of oxonium derivatives of [B₁₂H₁₂]²⁻ by various S-nucleophiles was studied. Reactions of tetrabutylammonium 1-tetramethylene-(3-oxa)-oxonium-closo-undecahydrododecaborate with thiourea and a series of thiols resulted in novel B₁₂-based mercaptane, aliphatic, aromatic and heteroaromatic sulfides with high yields under mild conditions. This approach was also used for the preparation of novel guanosine derivative of [B₁₂H₁₂]²⁻.     

Interaction of polyhedral boron hydride anions [B10H10] and [B12H12] with cyclic copper and silver 3,5-bis(trifluoromethyl)pyrazolate complexes

The interactions of cyclic trinuclear copper {[3,5-(CF₃)₂Pz]Cu}₃ and silver {[3,5-(CF₃)₂Pz]Ag}₃ complexes with polyhedral borate anions [B₁₀H₁₀]²⁻ and [B₁₂H₁₂]²⁻ in solvents of low-polarity were studied using IR spectroscopy (190-290 K). Two types of complexes were found in solution: {[((3,5-CF₃)₂PzM)₃][B_nH_n]}²⁻ and {[((3,5-CF₃)₂PzM)₃]₂[B_nH_n]}²⁻ (M = Ag, Cu; n = 10, 12). The stability constants of these complexes were determined from IR-spectra.     

Difunctionalized {closo‐1‐CB11} Clusters: 1‐ and 2‐Amino‐12‐ethynylcarba‐closo‐dodecaborates

Carba‐closo‐dodecaborate anions with two functional groups have been synthesized via a simple two‐step procedure starting from monoamino‐functionalized {closo‐1‐CB₁₁} clusters. Iodination at the antipodal boron atom provided access to [1‐H₂N‐12‐I‐closo‐1‐CB₁₁H₁₀]^? ( 1 a ) and [2‐H₂N‐12‐I‐closo‐1‐CB₁₁H₁₀]^? ( 2 a ), which have been transformed into the anions [1‐H₂N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀]^? (R=H ( 1 b ), Ph ( 1 c ), Et₃Si ( 1 d )) and [2‐H₂N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀]^? (R=H ( 2 b ), Ph ( 2 c ), Et₃Si ( 2 d )) by microwave‐assisted Kumada‐type cross‐coupling reactions. The syntheses of the inner salts 1‐Me₃N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀ (R=H ( 1 e ), Et₃Si ( 1 f )) and 2‐Me₃N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀ (R=H ( 2 e ), Et₃Si ( 2 f )) are the first examples for a further derivatization of the new anions. All {closo‐1‐CB₁₁} clusters have been characterized by multinuclear NMR and vibrational spectroscopy as well as by mass spectrometry. The crystal structures of Cs 1 a , [Et₄N] 2 a , K 1 b , [Et₄N] 1 c , [Et₄N] 2 c , 1 e , and [Et₄N][1‐H₂N‐2‐F‐12‐I‐closo‐1‐CB₁₁H₉]?0.5 H₂O ([Et₄N ]4 a ?0.5 H₂O) have been determined. Experimental spectroscopic data and especially spectroscopic data and bond properties derived from DFT calculations provide some information on the importance of inductive and resonance‐type effects for the transfer of electronic effects through the {closo‐1‐CB₁₁} cage.     

Polyhedral metallathiaborane chemistry: Synthesis and characterisation of metallathiaboranes based on the twelve-vertex icosahedral closo-{MSB10H10} unit, where M is Rh or Ir

The reaction of [nido-7-SB₁₀H₁₂] with [RhCl(PPh₃)₃] in the presence of N,N,N′N′-tetramethylnaphthalene-1,8-diamine (tmnd) in CH₂Cl₂ gives twelve-vertex [2,2-(PPh₃)₂-2-H-closo-2,1-RhSB₁₀H₁₀] (1) and eleven-vertex [8,8-(PPh₃)₂-nido-8,7-RhSB₉H₁₀] (2), as major products, plus the dimeric species [{(PPh₃)-closo-RhSB₁₀H₁₀}₂] (3) as a minor product. Reaction of 1 with PMe₂Ph in CH₂Cl₂ results in phosphine exchange and hydride substitution, affording the chloro analogue of 1, [2,2-(PMe₂Ph)₂-2-Cl-closo-2,1-RhSB₁₀H₁₀] (4). By contrast, reaction between [IrCl(PPh₃)₃] and [nido-7-SB₁₀H₁₂] in CH₂Cl₂ with tmnd affords only one product, twelve-vertex [2,2-(PPh₃)₂-2-H-closo-2,1-IrSB₁₀H₁₀] (5). [RhCl₂(η⁵-C₅Me₅)]₂ with [nido-7-SB₁₀H₁₂] under the same conditions gives twelve-vertex [2-(η⁵-C₅Me₅)-closo-2,1-RhSB₁₀H₁₀] (6). All the compounds are characterised by NMR spectroscopy, and by mass spectrometry, and the molecular structure of [2,2-(PMe₂Ph)₂-2-Cl-closo-2,1-RhSB₁₀H₁₀] (4) was established by single-crystal X-ray diffraction analysis. This last rhodathiaborane 4 is fluxional in solution through a process that involves a reversible partial rotation of the {RhCl(PMe₂Ph)₂} unit above the {SB₄} pentagonal face of the {SB₁₀H₁₀} fragment.     

Synthesis and characterization of a new isocyanato carborane anion [7-OCN-7-CB10H12]; study on its reactivity toward amino containing compounds

The new isocyanato carborane anion, [7-OCN-7-CB₁₀H₁₂]⁻ was prepared by the reaction of 7-H₃N-7-CB₁₀H₁₂ with triphosgene in the presence of triethylamine. The structure of this compound was established by ¹H, ¹¹B and ¹³C NMR as well as IR spectroscopy. The reactivigty of this compound with a series of organic amines was investigated. The resulting ureas were obtained in good to excellent yields. This approach is suitable for development of compounds for use in tumor selective Boron Neutron Capture Therapy (BNCT).     

Synthesis and Characterization of 2‐Mono‐ and 1,2‐Diaminocarba‐closo‐dodecaborates M[1‐R‐2‐H2N‐closo‐CB11H10] (R=H,Ph, H2N,CyHN)

The first primary 2‐aminocarba‐closo‐dodecaborates [1‐R‐2‐H₂N‐closo‐CB₁₁H₁₀]^? (R=H ( 1 ), Ph ( 2 )) have been synthesized by insertion reactions of (Me₃Si)₂NBCl₂ into the trianions [7‐R‐7‐nido‐CB₁₀H₁₀]^3?. The difunctionalized species [1,2‐(H₂N)₂‐closo‐CB₁₁H₁₀] ( 3 ) and 1‐CyHN‐2‐H₃N‐closo‐CB₁₁H₁₀ (H‐ 4 ) have been prepared analogously from (Me₃Si)₂NBCl₂ and 7‐H₃N‐7‐nido‐CB₁₀H₁₂. In addition, the preparation of [Et₄N][1‐H₂N‐2‐Ph‐closo‐CB₁₁H₁₀] ([Et₄N]‐ 5 ) starting from PhBCl₂ and 7‐H₃N‐7‐nido‐CB₁₀H₁₂ is described. Methylation of the [1‐Ph‐2‐H₂N‐closo‐CB₁₁H₁₀]^? ion ( 2 ) to produce 1‐Ph‐2‐Me₃N‐closo‐CB₁₁H₁₀ ( 6 ) is reported. The crystal structures of [Et₄N]‐ 2 , [Et₄N]‐ 5 , and 6 were determined and the geometric parameters were compared to theoretical values derived from DFT and ab initio calculations. All new compounds were studied by NMR, IR, and Raman spectroscopy, MALDI mass spectrometry, and elemental analysis. The discussion of the experimental NMR chemical shifts and of selected vibrational band positions is supported by theoretical data. The thermal properties were investigated by differential scanning calorimetry (DSC). The pK_a values of 2‐H₃N‐closo‐CB₁₁H₁₁ (H‐ 1 ), 1‐H₃N‐closo‐CB₁₁H₁₀ (H‐ 7 ), and 1,2‐(H₃N)₂‐closo‐CB₁₁H₁₀ (H₂‐ 3 ) were determined by potentiometric titration and by NMR studies. The experimental results are compared to theoretical data (DFT and ab initio). The basicities of the aminocarba‐closo‐dodecaborates agree well with the spectroscopic and structural properties.     

Reactions of oxonium derivatives of [B12H12] with amines: Synthesis and structure of novel B12-based ammonium salts and amino acids

The reactions of oxonium derivatives of [B₁₂H₁₂]²⁻ with various amines were studied. A series of novel B₁₂-species with ammonium group on the side chain was synthesized in high yield. A structure of tetrabutylammonium-[2-(2-morpholinium-ethoxy)-ethoxy]-undecahydro-closo-dodecaborate was determined and the existence of intramolecular N-H?O-B bond was shown. Using these reactions, novel boronated piperazines and amino acids were prepared.     

Metallacarborane chemistry of the hypho-[6,7-C2B6H13] anion: Reaction with nickelocene and the formation of three multimetallic nickel-boron clusters

The reaction of the hypho-[6,7-C₂B₆H₁₃]⁻ anion (1) with nickelocene and an excess of ‘proton sponge’ (1,8-bis-(dimethylamino-naphthalene)) in boiling acetonitrile leads to the formation of a pair of isomeric trimetallic nickel-boron clusters, [6,7,8-(CpNi)₃-1-CB₅H₆] (2) and [6,7,8-(CpNi)₃-2-CB₅H₆] (3), in a combined yield of 55%. Isomer (2) had been previously prepared from nido-2-CB₅H₉ but in much lower yield. Isomer (3) is without precedent and has been characterized using multi-nuclear NMR spectroscopy and mass spectrometry. Isomer (3) undergoes conversion to (2) via heating in boiling toluene. In addition to this isomeric pair, an interesting nido dimetallacarborane of constitution [6,6′-(CpNi)₂-7,7′-C₂B₆H₈] (4) has been isolated from the same reaction in 5% yield and characterized by single-crystal X-ray diffraction analysis.     

C(1)-Phenethyl Derivatives of [closo-1-CB11H12]− and [closo-1-CB9H10]− Anions: Difunctional Building Blocks for Molecular Materials

C(1)-vinylation of [closo-1-CB₉H₁₀]⁻ ( A ) and [closo-1-CB₁₁H₁₂]⁻ ( B ) with 4-benzyloxystyryl iodide followed by hydrogenation of the double bond and reductive deprotection of the phenol functionality led to C(1)-(4-hydroxyphenethyl) derivatives. The phenol functionality was protected as the acetate. The esters were then treated with PhI(OAc)₂ and the resulting isomers were separated kinetically (for derivatives of anion A ) or by chromatography (for derivatives of anion B ) giving the difunctionalized building blocks in overall yields of 9 % and 50 %, respectively. A similar series of reactions was performed starting with anions A and B and 4-methoxystyryl bromide and iodide. Significant differences in the reactivity of derivatives of the two carborane anions were rationalized with DFT computational results. Application of the difunctionalized carboranes as building blocks was demonstrated through preparation of two ionic liquid crystals. The extensive synthetic work is accompanied by single crystal XRD analysis of six derivatives.     

Silver(I) Clusters Stabilized by the Carba-closo-dodecaboranylethynyl Ligand with O-Donor Coligands and Template Ions

Large silver(I) clusters stabilized by the dianionic carba-closo-dodecaboranylethynyl ligand were obtained. Crystallization of polymeric {Ag₂(12-C≡C-closo-1-CB₁₁H₁₁)}_n from dimethyl sulfoxide afforded [Ag₁₄(12-C≡C-closo-1-CB₁₁H₁₁)₇(DMSO)₁₂] · DMSO that contained an Ag^I₁₀ cage augmented by four Ag^I ions. Crystals of [Ag₁₆(12-C≡C-closo-1-CB₁₁H₁₁)₈(THF)₁₂] · 2THF were obtained from anhydrous THF and {Ag₂(12-C≡C-closo-1-CB₁₁H₁₁)}_n. In the presence of moisture the similar but water-containing complex [Ag₁₆(12-C≡C-closo-1-CB₁₁H₁₁)₈(THF)₁₂(H₂O)₂] · 2.5THF was identified. Both silver(I) clusters are composed of a central octahedral Ag^I₆ unit and ten further silver(I) ions bonded via argentophilic interactions. [Ag₁₄(12-C≡C-closo-1-CB₁₁H₁₁)₇(DMSO)₁₂] · DMSO and [Ag₁₆(12-C≡C-closo-1-CB₁₁H₁₁)₈(THF)₁₂] · 2THF were characterized by elemental analysis and vibrational (IR and Raman) as well as NMR spectroscopy. In addition, the crystal structures of [Ag₂₅(12-C≡C-closo-1-CB₁₁H₁₁)₁₂(CH₃CN)_13.5(OH)] · 0.5CH₃CN and [Ag₂₅(12-C≡C-closo-1-CB₁₁H₁₁)₁₂{(CH₃)₂CO}_13.5(H₂O)Cl] · 15(CH₃)₂CO were determined. Both compounds contain Ag^I₁₄ rhombic dodecahedrons augmented by eleven silver(I) ions. A hydroxide or a chloride template ion is present in the center of the rhombic dodecahedron, respectively.     

Synthesis of a Tyr-octreotate conjugated closo-carborane [HC2B10H10]: a potential compound for boron neutron capture therapy

A novel Tyr³-octreotate conjugated closo-carborane as a potential compound for boron neutron capture therapy was obtained via Fmoc solid phase peptide synthesis. The boron cluster [C₂B₁₀H₁₁] was introduced through the reaction of 6,9-bis(acetonitrile)decaborane and 5-hexynoic acid yielding a new closo-carborane conjugated carboxylic acid which was coupled subsequently with solid phase conjugated Tyr³-octreotate. The final boron-containing peptide was purified by preparative reverse phase HPLC and structural identity was proved applying MALDI-TOF mass spectrometry.     

New method of synthesis of 6-hydroxy-nido-decaborane 6-(OH)B10H13 by cage opening of closo-[B10H10]

6-hydroxy-nido-decaborane 6-(OH)B₁₀H₁₃ was prepared by opening the cage [B₁₀H₁₀]²⁻ in strong acidic medium. The reaction must be carried out in the presence of an inert solvent such as hexane. 6-(OH)B₁₀H₁₃ is obtained with a 30% yield and characterized by ¹¹B NMR and I.R. Boric acid was also detected. Attempts to reproduce the opening of the [B₁₀H₁₀]²⁻ cage in basic or neutral media have been unsuccessful.