cis-Palladium(II) complexes of derivatives of di-(2-pyridyl)methane: Study of the influence of the bridge group in the coordination mode

Palladium(II) complexes containing di-(2-pyridyl)-N-methylimine (1), di-(2-pyridyl)methanol (2) and di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate (4) ligands were synthesized and characterized by ¹H and ¹³C NMR in solution, IR and X-ray single crystal diffraction. Crystal structures of cis-dichloro[di-(2-pyridyl)-N-methylimine]palladium(II) (5), cis-dichloro[di-(2-pyridyl)methanol]palladium(II) (6) and cis-dichloro[di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate]palladium(II) (7) showed a bidentate coordination mode of the di-(2-pyridyl)methane derivatives 1, 2 and 4. In these complexes is observed the formation of a five-membered chelate ring with the iminic ligand 1 and six-membered chelate rings with the pyridinic ligands 2 and 4. In all complexes the palladium atom displays a distorted square planar geometry.     

First cross-coupling reactions on halogenated 1H-1,2,4-triazole nucleosides

The halogenated 1H-1,2,4-triazole glycosides 6-10 were synthesized by BF₃-activated glycosylation of 3(5)-chloro-1,2,4-triazole (2), 3,5-dichloro-1,2,4-triazole (3), 3,5-dibromo-1,2,4-triazole (4), and 3(5)-bromo-5(3)-chloro-1,2,4-triazole (5) with 1,2,3,4-tetra-O-pivaloyl-β-d-xylopyranose (1). The β-anomeric major products 3-chloro-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (6β), 3,5-dichloro-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (7β), and 3,5-dibromo-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (8β) were used as starting materials for transition metal catalyzed C-C-coupling reactions. Arylations of the triazole ring of 7β, and 8β were successful in 5-position with phenylboronic acid, 4-vinylphenylboronic acid, and 4-methoxyphenylboronic acid, respectively, under Suzuki cross-coupling conditions (products 11-17). Moreover, a Cu-catalyzed perfluoroalkylation of 8β is reported with 1-iodo-perfluorohexane yielding 3-perfluorohexyl-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (18). Compound 18 was depivaloylated to the trihydroxy derivative 19. The copper-mediated reaction of 8β with Rupert's reagent gave the bis(3-bromo-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazol-5-yl) (20).     

N- vs O-Coordination in cyclomanganation of 1,5-diaryl-3-(2-pyridyl)pentane-1,5-diones and 3-(2-pyridyl)chalcones; cyclomanganation at saturated carbon and the crystal structure of [1,5-diphenyl-κC-3-(2-pyridyl- κN)pentan-2-yl-κC-1,5-dione-κOκO]tetracarbonylmanganesetricarbonylmanganese

Reaction of 1,5-diphenyl-3-(2-pyridyl)pentane-1,5-dione (5a) with 2.5 moles of benzylpentacarbonylmanganese in petroleum spirit under reflux gives a small amount of the symmetric di-aryl-manganated product [1,5-diphenyl-κC²-3-(2-pyridyl)pentane-1,5-dione-κO¹κO⁵]bis-(tetracarbonylmanganese) (7a), but mostly [1,5-diphenyl-κC²-3-(2-pyridyl-κN)pentan-2-yl- κC²-1,5-dione-κO¹κO⁵]tetracarbonylmanganesetricarbonylmanganese (6a) which is manganated at only one aryl carbon [by Mn(CO)₄] but also [by Mn(CO)₃ with N and O coordination] at the methylene carbon adjacent to the Mn(CO)₄-coordinated ketone carbonyl. The latter is a rare example of direct cyclomanganation at a saturated carbon and the only known case adjacent to a carbonyl group; the X-ray crystal structure of 6a is reported. With 3 moles of benzylpentacarbonylmanganese the yield of 6a remains unchanged but some trimanganation product [1,5-diphenyl-κC^2′κC^2?-3-(2-pyridyl-κN)pentan-2-yl-κC²-1,5-dione-κO¹κO⁵]tris-(tetracarbonylmanganese) (8a) is formed, presumably from 7a. Routes to products are proposed and activating factors considered. 1,5-Di-(2-thienyl)-3-(2-pyridyl)pentane-1,5-dione (5b) and its 3-thienyl isomer (5c) similarly give 6a analogues [1,5-di-(2-thienyl-κC³)-3-(2-pyridyl-κN)pentan-2-yl-κC²-1,5-dione-κO¹κO⁵]tetracarbonylmanganesetricarbonylmanganese (6b) and [1,5-di-(3-thienyl-κC²)-3-(2-pyridyl-κN)pentan-2-yl-κC²-1,5-dione-κO¹κO⁵]tetracarbonylmanganesetricarbonylmanganese (6c).Also reported are the mono-cyclomanganation product [1-(2,6-dimethoxyphenyl)-3-(2-pyridyl-κN)prop-2-en-2-yl-κC²-1-one]tetracarbonylmanganese (16) and dicyclomanganation product [1-(2,5-dimethyl-3-thienyl-κC⁴)-3-(2-pyridyl-κN)prop-2-en-2-yl- κC²-1-one-κO ]bis-(tetracarbonylmanganese) (17) from reaction of the respective (E)-1-aryl-3-(2-pyridyl)prop-2-en-1-ones (3-(2-pyridyl)chalcones), the first reported examples of enone metallation at the α-carbon via N-coordination by a β-2-pyridyl group.     

Synthesis of novel Y-type polyurethane containing azomethine moiety, as non-linear optical chromophore and their properties

3,4-Di-(2′-hydroxyethoxy)-4′-nitrobenzylidene II was prepared by condensation reaction of 3,4-dihydroxy-4′-nitrobenzylidene I with 1-chloro-2-ethanol. Monomer II was reacted with p-phenylene diisocyanate to yield polyurethane containing the non-linear optical chromophore 3,4-di-(2′-hydroxyethoxy)-4′-nitrobenzylidene. Polymer III shows thermal stability up to 300 °C in TGA thermogram. T_g value of the polymer obtained from DSC thermogram was 110 °C. The resulting polyurethane III was soluble in common organic solvents such as acetone, DMF and DMSO. The values of electro optic coefficient d₃₃ and d₃₁ of the poled polymer film were 3.15 × 10 ⁻⁷ and 1.5 × 10 ⁻⁷ esu, respectively.     

New mono- and binuclear Pd(II) complexes containing 1,2,4-triazole moieties

The reaction of AMTT (AMTT = 4-amino-3-methyl-1,2,4-triazol-5-thione, HL1) with palladium(II) chloride and triphenylphosphane as a co-ligand in acetonitrile afforded the mononuclear Pd^II-complex [(PPh₃)Pd(HL1)Cl]Cl·2CH₃CN (1). The complex [(PPh₃)Pd(HL1)I]Cl·1/2H₂O (2) was prepared via halogen exchange between 1 and sodium iodide in methanol/acetonitrile. The first binuclear palladium(II) complex containing singly deprotonated HL1, [(PPh₃)₂ClPd(L1)Pd(PPh₃)Cl]Cl·1/3H₂O·CH₃OH (3), was prepared by the reaction of HL1 with palladium(II) chloride and triphenylphosphane in the presence of sodium acetate in methanol.     

Three inorganic-organic hybrids of bismuth(III) iodide complexes containing substituted 1,2,4-triazole organic components with charaterizations of diffuse reflectance spectra

The reactions of two kinds of substituted 1,2,4-triazoles with BiI₃ yielded three inorganic-organic hybrids: [HL1]₄[Bi₆I₂₂]·[L1]₄·4H₂O (1) (L1=3-(1,2,4-triazole-4-yl)-1H-1,2,4-triazole); [HL2]₄[Bi₆I₂₂]·6H₂O (2); [HL2]₂[Bi₂I₈]·[L2]₂ (3) (L2=(m-phenol)-1,2,4-triazole). Both 1 and 2 have polynuclear anions of [Bi₆I₂₂]^4- to build up the inorganic layers and substituted 1,2,4-triazoles as the organic layers. Hybrid 3 consists of two BiI₅ square pyramids as inorganic layers. There exist hydrogen bondings and I?I interactions in the structures of 1, 2 and 3. Optical absorption spectra of 1, 2 and 3 reveal the presence of sharp optical gaps of 1.77, 1.77 and 2.07 eV, respectively, suggesting that these materials behave as semiconductors.     

Reaction of 1-substituted 3,5-diamino-1,2,4-triazoles with β-keto esters: synthesis and new rearrangement of mesoionic 3-amino-2H-[1,2,4]triazolo-[4,3-a]pyrimidin-5-ones

Reaction of 3,5-diamino-1-R-1,2,4-triazoles (R=Ph, Bn) with β-keto esters results in the reversible formation of N-(5-amino-1-R-1,2,4-triazol-3-yl)-substituted enaminoesters (8). Subsequent transformations depended on the reaction conditions. Compounds 8 undergo intermolecular reactions of condensation and amidation in the absence of solvent. However, in the presence of acetic acid they form 3-amino-5-oxo-2-R-2,5-dihydro-[1,2,4]triazolo[4,3-a]pyrimidin-4-ium-8-ides (10) followed by rearrangement to 3-amino-1-R-[1,2,4]triazolo[4,3-a]pyrimidin-5-ones (11). The transformation of 10 into 11 represents a new type of rearrangement in the azolopyrimidine series. Heating of enaminoesters 8 in ethanol with sodium ethoxide present, proved to be a suitable method for the preparation of the mesoionic compounds 10.     

Synthesis and characterization of N-(2-pyridyl)benzamide-based nickel complexes and their activity for ethylene oligomerization

A series of N-(2-pyridyl)benzamides (1)-(11) and their nickel complexes, [N-(2-pyridyl)benzamide]dinickel(II) di-μ-bromide dibromide (12)-(16) and (aryl)[N-(2-pyridyl)benzamido](triphenylphosphine)nickel(II) (17)-(24), were synthesized and characterized. The single-crystal X-ray analysis revealed that 12 and 14 are binuclear nickel complexes bridged by bromine atoms and each nickel atom adopts a distorted trigonal bipyramidal geometry. The key feature of the complexes 17, 19 and 23 is each has a six-membered nickel chelate ring including a deprotonated secondary nitrogen atom and an O-donor atom. The nickel complexes show moderate to high catalytic activity for ethylene oligomerization with methylaluminoxane (MAO) as cocatalyst. The activity of 12-16/MAO systems is up to 3.3 × 10⁴ g mol⁻¹ h⁻¹ whereas for 17-24/MAO systems it is up to 4.94 × 10⁵ g mol⁻¹ atm⁻¹ h⁻¹. The influence of Al/Ni molar ratio, reaction temperature, reaction period and PPh₃/Ni molar ratio on catalytic activity was investigated.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Synthesis of mono and doubly alkynyl substituted ferrocene and its crystal engineering using -C-H···O supramolecular synthon

Mono and doubly alkynyl substituted ferrocene complexes, [Fc(CH₂OCH₂CCH)_n], 2-3 (2: n = 1; 3: n = 2; Fc = ferrocene) have been synthesized from the room temperature reaction of mono and 1,1′-dihydroxymethyl ferrocene, Fc(CH₂OH)_n , 1a-b (1a: n = 1; 1b: n = 2) and propargyl bromide, in modest to good yields. These new ferrocene derivatives have been characterized by mass, IR, ¹H, ¹³C NMR spectroscopy, and molecular structures of compound 2 and 3 were unequivocally established by single crystal X-ray diffraction study. The crystal structure analysis revealed that 2 and 3 consist of infinite 1D zig-zag hydrogen bonded chains and 2D microporous hydrogen bonded network of molecules, linked by intermolecular C-H···O hydrogen bonding. The molecular structures of both 2 and 3 are further stabilized by C-H···π interactions.     

An investigation of the positional isomeric effect of terpyridine derivatives: Self-assembly of novel cadmium coordination architectures driven by N-donor covalence and π⋯π non-covalent interactions

Four cadmium compounds based on two pyridyl substituted terpyridine isomers, namely {[Cd₃(L1)₂(SCN)₆](THF)₂}_n (1), [Cd₂(L1)(CH₃OH)Cl₄]_n (2), [Cd₂(L2)₂(N₃)₄] (3) and [Cd₂(L2)₂(SCN)₄] (4) (L1 = 4′-(3-pyridyl)-2,2′:6′,2″-terpyridine, L2 = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine) have been synthesized and characterized by IR, elemental analyses, and luminescent spectroscopy with the purpose of investigating the influence of isomeric effect on network assembly. In compounds 1 and 2, L1 as a mono-tridentate bridging ligand links Cd^II atoms into 1D grid-like and 2D wave-like polymers. In contrast, in compounds 3 and 4, L2 as a chelating ligand forms Cd^II dimeric structures. The different coordination behaviors and the positional isomer effect were discussed under the same reaction conditions. In addition, three kind of π?π interactions in the four compounds were summarized, two of which could not be observed on tpy-based complexes.     

Syntheses and crystal structures of four new organotin complexes with Schiff bases containing triazole

Four new organotin complexes, namely [(Bu₂Sn)₂O(EtO)(L1)]₂ (1), [(Bu₂Sn)₂O(EtO)(L2)]₂ (2), [(Bu₂Sn)₂O(EtO)(L3)]₂ (3) and [Ph₃Sn(L4)] · 0.5H₂O (4), were obtained by reactions of Bu₂SnO and Ph₃SnOH with 4-phenylideneamino-3-methyl-1,2,4-triazole-5-thione (HL1), 4-furfuralideneamino-3-methyl-1,2,4-triazole-5-thione (HL2), 4-(2-thienylideneamino)-3-ethyl-1,2,4 -triazole-5-thione (HL3) and 4-(3,5-di-t-butylsalicylideneamino)-3-ethyl-1,2,4-triazole-5-thione (HL4). Compounds 1-4 were characterized by elemental analysis, IR spectra and their structures were determined by single-crystal X-ray diffraction methods. Complexes 1-3 show similar structures containing a Sn₄O₄ ladder skeleton in which each of the exo tin atoms is bonded to the N atom of a corresponding thione-form deprotonated ligand. Complex 4 shows a mononuclear structure in which the tin atom of triphenyltin group is coordinated by the S atom of a thiol-form L4⁻ anion.     

Synthesis and structural characterization of novel zinc(II) and cadmium(II) complexes with pyridine-phosphine chalcogenide ligands

New pyridine-phosphine chalcogenide ligands, tris[2-(2-pyridyl)ethyl]phosphine sulfide 1a and tris[2-(2-pyridyl)ethyl]phosphine selenide 1b, react with zinc(II) and cadmium(II) chlorides in EtOH at room temperature to afford complexes of compositions 2ZnCl₂·2L (2, L = 1a) and 3CdCl₂·2L (3a,b, L = 1a,b) in high yields. The solid-state structure of complexes 2, 3 has been proved by X-ray analysis data. Complex 2 is a centrosymmetric dimer, where two atoms of zinc are bonded by two bridging pyridine-phosphine sulfide ligands through N atoms. Complexes 3a,b exist as polymeric chains with each bridging ligand acting as a chelate N,S- or N,Se-donor to one cadmium(II) center and as a pyridine N-donor to the next cadmium(II) center.     

Comparative studies for selective deprotection of the N-arylideneamino moiety from heterocyclic amides: kinetic and theoretical studies. Part 2

4-Benzylideneamino-1,2,4-triazine-3,5(2H,4H)-diones (2-5), 6-styryl-1,2,4-triazine-3,5(2H,4H)-dione (6), and 6-styryl-2,3-dihydro-3-thioxo-1,2,4-triazin-5(4H)-one (7) were synthesized and pyrolyzed in the gas phase. The kinetic effect of changing the substituent on the triazine ring from hydrogen to methyl, phenyl, and styryl was measured. Analyses of the pyrolyzates of 2-5 showed the elimination products to be benzonitrile and the triazine fragment, while the pyrolyzates of 6 and 7 reveal the formation of cis- and trans-cinnamonitriles. Theoretical study of the pyrolysis reactions of 2-5 using an ab initio SCF method was investigated.     

Synthesis and characterization of aluminum complexes of 2-pyrazol-1-yl-ethenolate ligands

The synthesis and the characterization of some new aluminum complexes with bidentate 2-pyrazol-1-yl-ethenolate ligands are described. 2-(3,5-Disubstituted pyrazol-1-yl)-1-phenylethanones, 1-PhC(O)CH₂-3,5-R₂C₃HN₂ (1a, R = Me; 1b, R = Bu^t), were prepared by solventless reaction of 3,5-dimethyl pyrazole or 3,5-di-tert-butyl pyrazole with PhC(O)CH₂Br. Reaction of 1a or 1b with (R¹ = Me, Et) yielded N,O-chelate alkylaluminum complexes (2a, R = R¹ = Me; 2b, R = Bu^t, R¹ = Me; 2c, R = Me, R¹ = Et). Compound 1a was readily lithiated with LiBuⁿ in thf or toluene to give lithiated species 3. Treatment of 3 with 0.5 equiv of MeAlCl₂ or AlCl₃ yielded five-coordinated aluminum complexes [XAl(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₂] (4, X = Me; 5, X = Cl). Reaction of 5 with an equiv of LiHBEt₃ generated [Al(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₃] (6). Complex 6 was also obtained by reaction of 3 with 1/3 equiv of AlCl₃. Treatment of 5 with 2 equiv of AlMe₃ yielded complex 2a, whereas with an equiv of AlMe₃ afforded a mixture of 2a and [Me(Cl)AlOC(Ph)CH{(3,5-Me₂C₃HN₂)-1}] (7). Compounds 1a, 1b, 2a-2c and 4-6 were characterized by elemental analyses, NMR and IR (for 1a and 1b) spectroscopy. The structures of complexes 2a and 5 were determined by single crystal X-ray diffraction techniques. Both 2a and 5 are monomeric in the solid state. The coordination geometries of the aluminum atoms are a distorted tetrahedron for 2a or a distorted trigonal bipyramid for 5.     

Synthesis and structure of N-arylimines of β-tellurocyclohexenals with the intramolecular coordination N → Te bonds

A series of N-arylimines of β-tellurocyclohexenals 11 have been synthesized and the molecular and crystal structures of the compounds 11a-e and also β-(dimethyltelluronium)cyclohexenal perchlorate 12 studied by X-ray crystallography. All the compounds contain strong intramolecular coordination N → Te (O → Te) bonds of the hypervalent type. In 11a-e, the lengths of the N → Te bonds are within the range of 2.690-2.147 Å and are 1.0-1.5 Å shorter than the sum of the van der Waals radii of respective atoms. In the N-arylimines 11b-e with the electronegative groups attached to the tellurium center, the lengths of the N → Te bonds are very close to that characteristic of a standard covalent N-Te bond. The experimental observed geometries are well reproduced by the DFT calculations performed at B3LYP/LanL2DZ level of approximation. The energies of the intramolecular coordination N → Te bonds vary from 23 kJ mol⁻¹ for 11a to 119 kJ mol⁻¹ for 11e. The calculated energy of the O → Te bond in 12 was found to be 50 kJ mol⁻¹. The ¹²⁵Te NMR chemical shifts of compounds 11 span the wide range of 734.3-1622.4 ppm. The largest downfield ¹²⁵Te NMR chemical shifts are observed in the case of the compounds 11e, f in which the most electronegative atoms are attached to the tellurim centers.     

Syntheses,IR spectra,thermal properties and crystal structures of novel cyano-bridged polymeric complexes of zinc and cadmium with tetracyanoplatinate

Two novel one-dimensional polymeric cyano-bridged platinum(II) complexes of N-(2-hydroxyethyl)-ethylenediamine (hydeten), [M^II(hydeten)Pt(CN)₂(μ-CN)₂]_n (M^II = Zn^II (1) and Cd^II (2)), were synthesized and characterized by physico-chemical methods (elemental analysis, IR spectroscopy and thermoanalytical measurements) and X-ray diffraction. Thermal behaviours of 1 and 2 were followed using TG and DTA (DSC) techniques. The 1D chain structures of 1 and 2 were verified by X-ray diffraction studies. According to the positions of the bridging cyano groups, in complex 1 the polymeric chains are built up via the 2,2-CT type, while in complex 2 the polymeric chains are built up via the 2,2-TT type.     

Syntheses, structures and properties of five copper coordination polymers constructed by the triazole ligand

Reactions of different metal salts with 4-amino-3,5-bis(3-pyridyl)-1,2,4-triazole (3-abpt) gave rise to five new complexes, namely [Cu₄(CN)₄(3-abpt)₂]_n (1), [CuBr(3-abpt)]_n (2), [CuI(3-abpt)]_n (3), [Cu₃I₃(3-abpt)]_n (4) and [Cu(3-abpt)(SO₄)(H₂O)]_n (5). Compounds 1, 3, 4 and 5 are all 2D structures. Compound 1 is a double-layered polymer with an uncommon 3-nodal 3-connected (10³)(10².4)₄ network, 3 shows a 2D square layered structure, 4 is also a double-layered polymer with 2-nodal 4-connected (3.4.5.6².7)₂(3.4².5².7) network and 5 is a 2D structure which is ultimately stacked with an ABAB repeat pattern. Compound 2 is a 1D coordination polymer which exhibits a ladder-like network. The photoluminescence of 1-2 has also been investigated. The long emission lifetimes of 1-2 could be assigned to metal-to-ligand charge transfer triple excited states [MLCT].     

Syntheses and structural characterization of some mono- and di-p-nitrophenyl[3]ferrocenophanes: X-ray structure of [3]ferrocenophane, 3-p-nitrophenyl[3]ferrocenophane, and 3,4′-bis-(p-nitrophenyl)[3]ferrocenophane; DFT calculations on ferrocene derivatives

[3]Ferrocenophane (3a) reacts in a Gomberg reaction with diazotized p-nitroaniline to give a mixture of mono- and di-substituted products. The isomeric pairs of 3- and 2-(p-nitrophenyl)[3]ferrocenophanes (4 and 5), as well as 3,4′- and 3,4-bis-(p-nitrophenyl)[3]ferrocenophanes (6 and 7) were separated from the mixture by column chromatography on Al₂O₃ and characterized by means of mass, IR, UV, ¹H-NMR spectroscopy, and by X-ray analysis (4 and 6). PM3/tm and density functional theoretical calculations on ferrocene (1) and ferrocenophane derivatives are reported. A refined X-ray structure determination of [3]ferrocenophane (3a) is given.     

Structural and magnetic properties of metal complexes with pyridine-2,6-dicarboxylate and 5-(4-bromophenyl)-2,4′-bipyridine

A series of complexes has been synthesized based on pyridine-2,6-dicarboxylate (L1) as the bridging ligand and 5-(4-bromophenyl)-2,4′-bipyridine (L2) as the pendant with different metal ions such as Ni^II, Co^II, and Cu^II, under hydrothermal conditions. In nickel and cobalt complexes [M(L1)(L2)₂ · H₂O]_n (M = Ni²⁺ or Co²⁺), the metal ions are bridged by L1 to form 1D coordination zigzag polymeric chains with L2 pendants possessing hexa-coordinated distorted octahedral geometries. While the copper ions are penta-coordinated by L1 and L2 with distorted square pyramidal geometries forming the tetranuclear cluster with the formula [Cu₄(L1)₄(L2)₄] · 2H₂O. It has been found that both the structure and magnetic property of these complexes are metal ions dependent. Intramolecular antiferromagnetic interactions were observed in the nickel and cobalt 1D coordination polymers, while ferromagnetic coupling was found in the tetranuclear copper cluster. Density functional theory calculations suggested that the O–C–O bridges of L1 in a basal–apical mode are responsible for intracluster intermetallic ferromagnetic exchange for the tetranuclear copper cluster.