Synthesis and characterization of a new platinum(II) complex with L-mimosine

Synthesis and characterization of a new Pt(II)–mimosine complex are described. Elemental, mass spectrometry and thermal analyses for the complex are consistent with the formula [PtCl₂(C₈H₁₀N₂O₄)]·1.5H₂O. ¹³C NMR, ¹⁵N NMR and infrared spectroscopy indicate coordination of the ligand to Pt(II) through the N and O atoms in a square-planar geometry. The final residue after thermal treatment was identified as metallic Pt. The complex is soluble in dimethylsulfoxide.     

Synthesis of 4′-substituted 2,2′:6′,2″-terpyridines via a Mitsunobu reaction

Treatment of 2,6-di(pyridin-2-yl)pyridin-4(1H)-one with various appropriately protected ω-substituted primary alcohols or a nucleoside (3,3′-O-diBz-dUrd) in dry THF in the presence of triphenylphosphine and diisopropylazodicarboxylate gives the corresponding 4′-substituted terpyridines in high yield.     

Synthesis and characterization of a platinum(II) complex with N-acetyl-L-cysteine

Synthesis and spectroscopic studies in the solid-state of a platinum(II) complex with N-acetyl-L-cysteine are described. Elemental analyses are consistent with composition Pt₂(C₅H₈NO₃S)₄ · 3H₂O. Solid-state ¹³C NMR, infrared, and U-Vis spectroscopic results are consistent with coordination of the ligand to platinum(II) through sulfur. Thermal analyses confirmed water in the complex composition. Final residue of the thermal treatment was identified by powder X-ray diffractometry as metallic platinum.     

Synthesis of [1,2,4,5]tetrazino[6′,1′:2,3]imidazo[4,5-c]isoquinolin-5-ones by microwave-assisted three-component reaction

An efficient and original Ugi multicomponent reaction of aminopyridines and aminopyrimidines is reported. Starting from aminotetrazine 6 or 7, an isocyanide and an ortho-carboxybenzaldehyde, tetrazinoimidazoisoquinolinones were isolated, after few minutes of microwave irradiation, in good to excellent yields. The scope of this method was extended by using different isocyanides.     

N^N^C platinum(II) and palladium(II) cyclometallates of 6,6′-diphenyl-2,2′-bipyridine, L: Crystal and molecular structure of [Pd(L-H)Cl]

Reaction of K₂[PtCl₄] or Na₂[PdCl₄] with 6,6′-diphenyl-2,2′-bipyridine, L, gives the cyclometallated species [Pt(L-H)Cl], 1, and [Pd(L-H)Cl], 2, respectively, where L-H is a terdentate N^N^C anionic ligand originated by direct activation of a C(sp²)-H bond. The crystal structure of 2 has been solved by X-ray diffraction and compared to that of the analogous complex [Pd(L′-H)Cl] L′ = 6-phenyl-2,2′-bipyridine. The second phenyl ring in 2 entails a considerable distortion of the coordination around the metal. A similar distortion is also to be expected in the analogous compound 1, due to the almost equal covalent radii of palladium(II) and platinum(II).From the complexes 1 and 2 the chloride can be displaced with AgBF₄ and substituted by CO or PPh₃ to give the corresponding cationic species. By reaction of 1 with Na[BH₄] substitution of H⁻ for Cl⁻ can be achieved: the rare hydrido complex [Pt(L-H)H], stabilized only by nitrogen ligands, was isolated in the solid state and fully characterized in solution. It is noteworthy that in the case of the 6-phenyl-2,2′-bipyridine the analogous terminal hydride [Pd(L′-H)H] is unstable. In platinum chemistry the reaction of 6-substituted 2,2′-bipyridines is known to give either N^N^C or N′^C(3) rollover cyclometallation, depending on the nature of the metal precursor. In the case of 6,6′-Ph₂-2,2′-bipy cyclometallation was also shown to undergo multiple C-H activation giving the C^N^C pincer complex [Pt(L-2H)(DMSO)]. The latter species can be related to complex 1: indeed its reaction with HCl produces complex 1 and [Pt(L-H)(DMSO)Cl], a rollover species with a pendant phenyl substituent.     

Synthesis, properties and molecular structure of a novel dicyanoheptafulvene derivative, 4′-dicyanomethylidenedispiro[cyclohexane-1, 1′-(1′,4′,7′-trihydrocyclopenta[f]azulene)-7′,1″-cyclohexane]

A novel dicyanoheptafulvene 9 annulated by two spiro[4,5]deca-1,3-dienes was synthesized by the reaction of dispirocyclopentaazulenium cation 8 with bromomalononitrile. Although 9 was found to have a nonplanar heptafulvene structure by its X-ray crystallographic analysis, it is still capable of π-conjugation and thus shows appreciable contribution of the dipolar resonance form 9B based on its spectroscopic data. The degree of the contribution was further evaluated for various dicyanoheptafulvenes in terms of the partial sum of atomic charges of the dicyanomethylene group in the calculated structures besides the interplanar angles of the heptafulvene part and the length of the exocyclic double bond in the crystal structures.     

Synthesis of chiral 2′,3′-pyranone(pyrrolidinone)-fused tryptamines

Chiral pyrano- and pyrrolidino-fused tryptamines were prepared by a diasteroselective trimolecular condensation between indole, Garner's aldehyde and Meldrum's acid, followed by selective functional group transformations.     

Diastereoselective synthesis of 1-alkyl-2,4,6-trioxoperhydropyrimidine-5-spiro-3′-(1′,2′,3′,4′-tetrahydroquinolines)

Knoevenagel products formed by the condensation of N-monoalkyl barbituric acids with o-tert-amino benzaldehydes undergo tert-amino effect reactions (T-reactions) yielding 1-alkyl-2,4,6-trioxoperhydropyrimidine-5-spiro-3′-(1′,2′,3′,4′-tetrahydroquinoline) derivatives as a mixture of (S^∗,S^∗)- and (S^∗,R^∗)-diastereomers. Mostly, the major diastereomer has the S^∗,S^∗-configuration. According to X-ray diffraction data in the solid form and NOE data in solution, diastereoselectivity of the T-reactions can be associated with the structure of the Knoevenagel products whose conformation is fixed by the strong intramolecular C-H?π interaction.     

Synthesis of (±)-4′-ethynyl-5′,5′-difluoro-2′,3′-dehydro-3′-deoxy- carbocyclic thymidine: a difluoromethylidene analogue of promising anti-HIV agent Ed4T

Synthesis of (±)-4′-ethynyl-5′,5′-difluoro-2′,3′-dehydro-3′-deoxy-carbocyclic-thymidine (8) was carried out. The difluoromethylylidene group of 8 was constructed by the electrophilic fluorination to the cyclopentenone 11 by using Selectfluor^®. Introduction of thymine base was investigated based on the Mitsunobu reaction by employing cyclopentenyl allyl alcohols variously substituted at the 4-position. It was found the 4-methoxycarbonyl derivative 14 gave the highest selectivity both in terms of regio- and stereochemistry.     

Synthesis and structural characterization of the hydrido carbido ruthenium cluster [PPh4][Ru6C(CO)16H]

According to the protonation of [PPh₄]₂[Ru₆C(CO)₁₆] (1b) withp-toluene-sulfonic acid, a hydrido ruthenium cluster [PPh₄][Ru₆C(CO)₁₆H] (3b) was obtained in 53% yield, which readily decomposed in protic solvents even at –20°C to yield1b, Ru₆C(CO)₁₆H₂, and Ru₅C(CO)₁₅. Cluster3b was characterized by single-crystal X-ray analysis. The six metal atoms are arranged in the form of an octahedron with the carbido ligand located in the center. There are 13 terminal carbonyl, three bridging carbonyl, and a bridging hydrido ligands.     

Synthesis,spectroscopy, X-ray crystal structure,and DFT studies on a platinum(II) Schiff-base complex

[PtCl₂(SMe₂)₂] reacts with (N,N′-bis(salicylidene)-1,2-cyclohexanediamine) to give (N,N′-bis(salicylidene)cyclohexane-1,2-diamine)platinum(II). The complex has been characterized by elemental analysis, infrared (IR), UV-Vis, and single-crystal X-ray diffraction. Pt(II) is in a square-planar environment, coordinated by a chelating N₂O₂ donor. Density functional theory (DFT) calculations such as geometry optimization, vibrational frequency, electronic properties, and natural bond orbital (NBO) have been performed for the platinum compound using the OLYP method at TZP(6-311G*) basis set. The optimization calculation shows that the geometry parameters can be reproduced with the OLYP/TZP basis set. Experimental IR frequencies and calculated vibrational frequencies support each other. Time-dependent DFT has been used for absorption wavelengths and results were compared with experimental data. Moreover, NBO analysis has been performed.     

Synthesis and characterization of a platinum(II) complex of camphenylphosphonic acid

Camphenylphosphonic acid RPO₃H₂, prepared by the literature reaction of PCl₅ with camphene, has been characterized by a single-crystal X-ray diffraction study. The compound crystallizes with a double chain structure formed by connected eight-membered hydrogen-bonded rings. Reaction of RPO₃H₂ with cis-[PtCl₂(PPh₃)₂] and excess silver(I) oxide in refluxing dichloromethane gives the platinum(II) phosphonate complex [Pt{O₃PR}(PPh₃)₂]. ³¹P{¹H} NMR spectroscopic characterization of [Pt{O₃PR}(PPh₃)₂] shows that the two PPh₃ ligands are inequivalent due to asymmetry of the camphenyl group. An X-ray diffraction study on the platinum complex shows that the PC–H bond is directed toward the four-membered ring, resulting in the terpene group pointing away from the ring, in contrast to the previously reported structure of the saturated camphanylphosphonate complex. The differences are discussed in terms of steric interactions involving the phosphonate ligands.     

Synthesis and spectral characterization of platinum(II) complexes containing eugenol,a natural allylphenol

For the first time, eugenol, a natural bioactive allylphenol, was introduced into coordination with platinum(II) by replacement of ethylene from Zeise’s salt with eugenol (Eug). The obtained complex, K[PtCl₃(Eug)] (1), was used as the key compound for preparation of the series of trans-[PtCl₂(Eug)(Amine)] (2–11), [PtCl(Eug)(8-O-quinoline)] (12) and [PtCl(Eug)(2-O₂C-quinoline)] (13). The synthesized complexes were characterized by elemental analyses, IR, ¹H NMR, ¹³C NMR, HSQS, HMBC, NOESY, and MS spectra. In 1–13 eugenol coordinates with Pt(II) at ethylenic double bond of the allyl group, the donor N of the amines is in trans-position in comparison with the double bond. A display of the trans-effect on the chemical shift of ¹H and ¹³C was remarked. Seven complexes were tested for cell in vitro cytotoxicity on human cancer cells. Complexes 3 and 12 exhibit high activities on Hep-G2 with IC₅₀ = 3.12 and 5.29 μM; 12 gives high activity against KB, Lu and MCF-7 with IC₅₀ = 0.43, 2.95 and 1.84 μM, respectively. Most of these IC₅₀ are lower than those of cisplatin.     

1,1′-Methylene-bis(1,1′,2,2′,3,3′,4,4′-octahydroisoquinoline): synthesis, reaction, resolution, and application in catalytic enantioselective transformations

The preparation of new chiral 1,3-diamine ligand systems based on the 1,1′-methylene-bis(1,1′,2,2′,3,3′,4,4′-octahydroisoquinoline) framework is described. Synthesis of various mono-, di-, and bridged N-alkyl derivatives are presented. Resolution of one compound, its Cu(I)Br X-ray crystallographic structure and the preliminary results on its application in the enantioselective Henry and Aldol reactions are disclosed.     

Synthesis,structure and characterization of the trinuclear copper (I) complex [Cu3(μ3-Br)2(dppm)3]Br

The novel trinuclear copper(I) complex [Cu₃(μ₃,-Br)₂(dppm)₃]Br has been obtained by reaction of bis(diphenyl-phosphino)methane (dppm) with cupric bromide. The title complex was characterized by single-crystal X-ray analysis, elemental analysis, molecular weight determination, ³¹P NMR and its conductivity was also measured. The [ Cu₃ (dppm)₃ Br₂ ]⁺ cation consists of a triangular array of copper atoms, with dppm ligands (Ph₂ PCH₂ PPh₂) bridging each edge of the triangle and two triply bridging Br groups bound to the two faces of the Cu₃ unit. Crystallographic data: monoclinic, space group P2₁/c, a = 1.4739(4), b = l.7708(5), c = 2.8395(8) nm, β= 97.16(3)°, V = 7.353nm³, Z = 4, F(000)= 3296, D_calc, = 1.472 g/cm³, μ = 26.478 cm^?1, R=0.06, R_W = 0.08, 4654 reflections observed with I3≥(I).     

Straightforward synthesis of 3′-deoxy-3′,4′-didehydronucleoside-5′-aldehydes via 2′,3′-O-orthoester group elimination: a simple route to 3′,4′-didehydronucleosides

Straightforward, high-yielding syntheses of 3′-deoxy-3′,4′-didehydronucleoside-5′-aldehydes and 3′-deoxy-3′,4′-didehydronucleosides starting from 2′,3′-O-orthoester derivatives of ribonucleosides are described.     

An efficient one-pot three-step domino synthesis of substituted bis(pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones)

A convenient and efficient one-pot three-step domino approach to bis(pyrazinothienopyrimidinones) from ethyl 3-(triphenylphosphoranylideneamino)-thieno[2,3-b]pyrazine-6-carboxylate 1 has been developed. In this method, treatment of phosphazene 1 with a mixture of isocyanates, nitrogen, sulfur, and oxygen bis(nucleophiles) and K₂CO₃ in refluxing THF regioselectively furnishes the corresponding bis(pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones) in satisfactory to good yields. This methodology is highly versatile and efficient for the generation of these functionalized bis(triheterocyclic) compounds that are not readily available by other synthetic methods.     

Synthesis and characterization of soluble polyimides based on a new fluorinated diamine: 4-Phenyl-2,6-bis[3-(4′-amino-2′-trifluoromethyl-phenoxy) phenyl] pyridine

A new kind of pyridine-containing aromatic diamine monomer, 4-phenyl-2,6-bis[3-(4′-amino-2′-trifluoromethyl-phenoxy) phenyl] pyridine (m-PAFP), was successfully synthesized by a modified Chichibabin reaction of 3-(4′-nitro-2′-trifluoro-methyl-phenoxy)-acetophenone with benzaldehyde, followed by a catalytic reduction. A series of fluorinated pyridine-bridged aromatic poly(ether-imide)s were prepared from the resulting diamine monomer with various aromatic dianhydrides via a conventional two-step thermal or chemical imidization method. The inherent viscosities values of these polyimides were in the range of 0.56-1.02 dL/g, and they could be cast and thermally converted into transparent, flexible, and tough polyimide films. The polyimides displayed higher solubility in polar solvents such as NMP, DMSO and m-cresol. The polyimides had good thermal stability, with the glass transition temperatures (T_g) of 187-211 °C, the temperatures at 5% weight loss of 511-532 °C, and the residue at 800 °C in air was higher than 50%. These films also had dielectric constants of 2.64-2.74 at 10 MHz and low water uptake 0.53-0.66%. Wide-angle X-ray diffraction measurements revealed that these polyimides were predominantly amorphous. Moreover, the polymer films of these novel polyimides showed outstanding mechanical properties with the tensile strengths of 90.1-96.6 MPa, elongations at breakage of 8.9-10.7% and tensile modulus of 1.65-1.98 GPa.     

Synthesis of pyrido[2′,1′:2,3]imidazo[4,5-b]quinoline and pyrido[1′,2′:1,2]imidazo[4,5-b]quinoline and their benzo and aza analogs via tandem catalysis

In this paper we report regioselective tandem metal-catalyzed aminations on dihaloquinolines (2-chloro-3-iodoquinoline and 2,3-dibromoquinoline) with amino(benzo)(di)azines. Eight new heterocyclic scaffolds of the dipyridoimidazole type could be synthesized. By controlling the reaction temperature selective C-2 intermolecular Pd-catalyzed amination on 2,3-dibromoquinoline with amino(benzo)(di)azines can be achieved.