Heteroleptic platinum(II) complexes of macrocyclic thioethers and halides: the crystal structures of [Pt(9S3)Cl2], [Pt(9S3)Br2], and [Pt(9S3)I2]

The synthesis, spectroscopic, and crystal structures of three heteroleptic thioether/halide platinum(II) (Pt(II)) complexes of the general formula [Pt(9S3)X₂] (9S3=1,4,7-trithiacyclononane, X=Cl⁻, Br⁻, I⁻) are presented. All three 9S3/dihalo complexes form very similar structures in which the Pt(II) center is surrounded by a cis arrangement of two halides and two sulfur atoms from the 9S3 ligand. The third sulfur from the 9S3 forms a long distance interaction with the Pt center resulting in an elongated square pyramidal structure with a S₂X₂+S₁ coordination geometry. The distances between the Pt(II) center and axial sulfur shorten with larger halide ions (Cl⁻=3.260(3) Å>Br⁻=3.243(2) Å>I⁻=3.207(2) Å). These distances are consistent with the halides functioning as π donor ligands, and their Pt---S axial distances fall intermediate between Pt(II) thioether complexes involving π acceptor and σ donor ligands. The ¹⁹⁵Pt NMR chemical shift values follow a similar trend with an increased shielding of the platinum ion with larger halide ions. The 9S3 ligand is fluxional in all of these complexes, producing a single carbon resonance. Additionally, a related series of homoleptic crown thioether complexes have been studied using ¹⁹⁵Pt NMR, and there is a strong correlation between the chemical shift and complex structure. Homoleptic crown thioethers show the anticipated upfield chemical shifts with increasing number of coordinated sulfurs. Complexes containing four coordinated sulfur donors have chemical shifts that fall in the range of −4000 to −4800 ppm while a value near −5900 ppm is indicative of five coordinated sulfurs. However, for S₄ crown thioether complexes, differences in the stereochemical orientation of lone pair electrons on the sulfur donors can greatly influence the observed ¹⁹⁵Pt NMR chemical shifts, often by several hundred ppm.     

Crystal structures of [Ru(terpy)(HPB)(H2O)](PF6)2 and [Ru(terpy)(HPB)(2-picoline)](PF6) and the kinetics studies of the aqua ligand substitution by pyridine and substituted pyridines

The crystal structures of [Ru(terpy)(HPB)(H₂O)](PF₆)₂, 1, and [Ru(terpy)(HPB)(2-picoline)](PF₆), 2, (where terpy = 2,2′:6′,2′′-terpyridine and HPB = 2-(2′-hydroxyphenyl)-benzoxazole) have been determined. Both structures show slightly distorted octahedral coordination around the ruthenium center. In complex 1, the imine nitrogen of the HPB ligand occupies an axial position and is trans to the aqua ligand whereas in complex 2, the imine nitrogen is trans to the nitrogen of the 2-picoline ligand. The Ru-N(2-picoline) bond distance is much longer than the other Ru-N bonds in the complex due to steric effects from the methyl group of 2-picoline. In both complexes, the phenolate oxygen of the HPB ligand is in the equatorial position and trans to the center nitrogen of the terpyridine. The reaction of [Ru(terpy)(HPB)(H₂O)](PF₆)2 with pyridine and its analogs, 2-picoline and 4-picoline in dichloromethane was monitored spectrophotometrically. There is an initial reduction of the [Ru(III)-H₂O] complex to [Ru(II)-H₂O] complex prior to the substitution of the aqua ligand. The values of the activation parameters indicate that the substitution of the aqua ligand by pyridine, 2-picoline and 4-picoline follow an associative mechanism.     

Mononuclear Pt(II) and Pd(II) 1,4-dithiolato complexes. Crystal structures of [Pt((−) DIOS) (PPh3)2] and [Pd(S(CH2) 4S)(Ph2P(CH2) 3PPh2)]. Application in styrene hydroformylation

Addition of 1,4-dithiols to dichloromethane solutions of [PtCl₂(P-P)] (P-P = (PPh₃)₂, Ph₂P(CH₂)₃PPh₂, Phd₂P(CH₂)₄PPh₂; 1,4-dithiols = HS(CH₂)₄SH, (−)DIOSH₂ (2,3-O-isopropylidene-1,4-dithiol-l-threitol), BINASH₂ (1,1′-dinaphthalene-2,2′-dithiol)) in the presence of NEt₃ yielded the mononuclear complexes [Pt(1,4-dithiolato)(P-P)]. Related palladium(II) complexes [Pd(dithiolato)(P-P)] (P-P=Ph₂P(CH₂)₃PPh₂, Ph₂P(CH₂)₄PPh₂; dithiolato = ⁻S(CH₂)₄S⁻, (−)-DIOS) were prepared by the same method. The structure of [Pt((−)DIOS)(PPh₃)₂] and [Pd(S(CH₂)₄S)(Ph₂P(CH₂)₃PPh₂)] complexes was determined by X-ray diffraction methods. Pt—dithiolato—SnC1₂ systems are active in the hydroformylation of styrene. At 100 atm and 125°C [Pt(dithiolate)(P-P)]/SnCl₂ (Pt:Sn = 20) systems provided aldehyde conversion up to 80%.     

Reaction of [CpRu(CH3CN)3]PF6 with bidentate ligands: structural characterization of [{CpRu(CH3CN)2}2(μ-η-dppe)](PF6)2 [dppe=1,2-bis(diphenylphosphino)ethane]

The reaction of [CpRu(CH₃CN)₃]PF₆ with the bidentate ligands L-L=1,2-bis(diphenylphosphino)ethane, dppe, and (1-diphenylarsino-2-diphenylphosphino)ethane, dpadppe, affords mononuclear or dinuclear complexes of formula [CpRu(η²-L-L)(CH₃CN)]PF₆, [{CpRu(CH₃CN)₂}₂(μ-η^1:1-L-L)](PF₆)₂ and [{CpRu(CH₃CN)}₂(μ-η^1:1-L-L)₂](PF₆)₂ (L-L=dppe, dpadppe). All of the compounds are characterized by microanalysis and NMR [¹H and ³¹P{¹H}] spectroscopy. The crystal structure of [{CpRu(CH₃CN)₂}₂(μ-η^1:1-dppe)](PF₆)₂ has been determined by X-ray diffraction analysis. The complex exhibits a dppe ligand bridging two CpRu(CH₃CN)₂ fragments.     

Synthesis and characterization of monomeric siloxo palladium(II) complexes: crystal structure of [Pd(tmeda)(C6F5)(OSiPh3)]

Mononuclear palladium-hydroxo complexes of the type [Pd(N-N)(C₆F₅)(OH)] [(N-N)=2,2^′-bipyridine (bipy), 4,4^′-dimethyl-2,2^′-bipyridine (Me₂bipy), or N,N,N^′,N^′-tetramethylethylenediamine (tmeda)] react with silanols HOSiR₃ in toluene giving the corresponding siloxo complexes [Pd(N-N)(C₆F₅)(OSiR₃)]. The X-ray crystal structure of [Pd(tmeda)(C₆F₅)(OSiPh₃)] has been determined. In one of the two molecules in the asymmetric unit there is an intramolecular interaction by phenyl-pentafluorophenyl π-stacking.     

Synthesis and structure of mixed-metal thiolate complex Cp′Cr(CO)2(μ-SBu)Pt(PPh3)2: Side-on-coordination of Cr–S double bond with platinum

The reaction of [Cp′Cr(CO)₂(μ-SBu)]₂ (1) (Cp′ = MeC₅H₄) with (PPh₃)₂Pt(PhCCPh) gives Cp′Cr(CO)₂(μ-SBu)Pt(PPh₃)₂ (2) which could be regarded as a product of the substitution of acetylene ligand at platinum by a monomeric chromium–thiolate fragment. According to the X-ray diffraction analysis 2 contains single Cr–Pt (2.7538(15)) and Pt–S (2.294(2) Å) bonds while Cr–S bond (2.274(3) Å) is shortened in comparison with ordinary Cr–S bonds (2.4107(4)–2.4311(4) Å) in 1. The bonding between Cr–S fragment and platinum atom is similar to the olefine coordination in their platinum complexes.     

Synthesis and complexation of a new facultative tridentate S2Te donor ligand MeS(CH2)3Te(CH2)3SMe: crystal structures of [Rh(Cp*)(S2Te)][PF6]2 and [PtCl(S2Te)]PF6

The syntheses and spectroscopic characterisation of the new facultative tridentate tellurium containing ligands MeS(CH₂)₃Te(CH₂)₃SMe (S₂Te) and H₂N(CH₂)₃Te(CH₂)₃NH₂ are described. The complexes of the former, fac-[Mn(CO)₃(S₂Te)]CF₃SO₃, [Rh(Cp*)(S₂Te)][PF₆]₂, [MCl(S₂Te)]PF₆ (M=Pd or Pt), [Cu(S₂Te)]BF₄ and [Ag(S₂Te)]CF₃SO₃ have been prepared and characterised by analysis, IR, ¹H-, ¹³C{¹H}-, ¹²⁵Te- and ¹⁹⁵Pt-NMR spectroscopy and mass spectrometry. The X-ray crystal structures of [Rh(Cp*)(S₂Te)][PF₆]₂ and [PtCl(S₂Te)]PF₆ are described. The results are compared with those obtained from complexes of the related tridentates Te{(CH₂)₃TeR}₂, Se{(CH₂)₃SeMe}₂ and S{(CH₂)₃SR}₂.     

Synthesis and characterisation of the platinum complexes [PtCl(CClPAr)(PPh3)2] and [PtCl(CClPAr′)(PPh3)2] as potential intermediates in the preparation of phosphaalkynes

Oxidative addition reactions of Cl₂CPR (R = 2,4,6-tris(trifluoromethyl)phenyl (Ar) or 2,6-bis(trifluoromethyl)phenyl (Ar′) with Pt(PPh₃)₄ yield the cis and trans (at platinum) complexes [PtCl(ClCPAr)(PPh₃)₂] and [PtCl(ClCPAr′)(PPh₃)₂]. All starting materials and intermediates have been characterised by NMR spectroscopy. The crystal and molecular structures of the trans-platinum complexes have been determined by single-crystal X-ray diffraction at low temperature.     

Syntheses and properties of cyanamide and cyanoguanidine complexes of platinum(II). X-Ray structure of trans-[Pt(CF3)(NCNEt2)(PPh3)2][BF4]

Complexes trans-[PtX(L)(PPh₃)₂]A [1: X = CF₃; A = BF₄; L = NCNH₂, NCNMe₂, NCNEt₂, or NCNC(NH₂)₂. 2: X = Cl; A = BPh₄; L = NCNMe₂ or NCNEt₂] and cis-[PtCl(L)(PPh₃)₂][BPh₄] [3: L = NCNH₂ or NCNC(NH₂)₂], which appear to be the first cyanamide or cyanoguanidine complexes of platinum to be reported, have been prepared by treatment of trans-[PtBr(CF₃)(PPh₃)₂] (in CH₂Cl₂/acetone and in the presence of Ag[BF₄]) or of cis-[PtCl₂(PPh₃)₂] (in THF and in the presence of Na[BPh₄]), respectively, with the appropriate substrate. In KBr pellets or in solution 1 (L = NCNMe₂ or NCNEt₂) undergoes ready replacement of the organocyanamide (under the trans influence of CF₃) by bromide to regenerate trans-(PtBr(CF₃)(PPh₃)₂]. The X-ray structure of 1 (X = CF₃, A = BF₄, L = NCNEt₂) is also reported, and shows the presence of two apical intramolecular contacts of the metal with two ortho-hydrogen atoms of the phosphines, whereas the amine N atom of the diethylcyanamide is trigonal planar in the linear NCN framework with a delocalized π system.     

Simple protocol for the synthesis of the asymmetric PCP pincer ligand [C6H4-1-(CH2PPh2)-3-(CH(CH3)PPh2)] and its Pd(II) derivative [PdCl{C6H3-2-(CH2PPh2)-6-(CH(CH3)PPh2)}]

The asymmetric PCP pincer ligand [C₆H₄-1-(CH₂PPh₂)-3-(CH(CH₃)PPh₂)] (4) has been synthesized in a facile manner in three simple steps in high yield. Metallation of PCP pincer ligand (4) with [Pd(COD)Cl₂] affords complex [PdCl{C₆H₃-2-(CH₂PPh₂)-6-(CH(CH₃)PPh₂)}] (7) in good yield.     

Selective formation of trans and cis(CH3CN) isomers of [Ru(bpy)(CO)2(CH3CN)2] (bpy=2,2-bipyridine) from [Ru(CO)2(CH3CN)3]2(PF6)2 using an electrochemical oxidation step

The selective in situ synthesis of trans and cis(CH₃CN)-[Ru(bpy)(CO)₂ (CH₃CN)₂]²⁺ isomers from the same [Ru(CO)₂ (CH₃CN)₃]₂²⁺ dimer precursor but using either an electrochemical-chemical or chemical-electrochemical process is described.     

Olefin uptake as tool for linking platinum(II) and iridium(III) in heterobinuclear complexes: Synthesis and characterization of [PtI2(Me2phen){(C5Me4CH2CH2CHCH2)Ir(Me)(CO)(Ph)}]

The ability of [PtX₂(Me₂phen)] (Me₂phen = 2,9-dimethyl-1,10-phenanthroline, X = Cl, Br, I) to act as olefin scavengers, easily giving stable trigonal bipyramidal five-coordinated platinum species [PtX₂(Me₂phen)(η²-olefin)], has been checked toward [(C₅Me₄CH₂CH₂CHCH₂)Ir(Me)(CO)(Ph)], a cyclopentadienyl complex containing an olefinic function introduced by ring methyl activation in the pentamethylcyclopentadienyl iridium(III) complex [(C₅Me₅)Ir(Me)(CO)(Ph)]. The reaction of [PtI₂(Me₂phen)] with [(C₅Me₄CH₂CH₂CHCH₂)Ir(Me)(CO)(Ph)] results in the formation of the heterometallic binuclear complex [PtI₂(Me₂phen){(C₅Me₄CH₂CH₂CHCH₂)Ir(Me)(CO)(Ph)}] which is stable and has been completely characterized by elemental analysis, ¹H, ¹³C, and ¹⁹⁵Pt NMR spectroscopy.     

Structural studies of carbene complexes: The crystal structure of the secondary carbene complex RuI2[CHN(CH3)(p-CH3C6H4)](CO)(CN-p-CH3C6H4)(P(C6H5)3)

Crystal and molecular structures of the title compound have been determined from a three-dimensional X-ray analysis using diffractometer data. The crystals are triclinic, space group P$\text{1}$, with Z = 2 in a unit cell of dimensions a = 11.640(1), b = 10.9139(8), c = 16.587(2) Å, α = 87.983(5), β = 99.670(6), λ = 62.250(5)°. Full matrix least squares refinement has given a final R-factor of 0.043 for 2726 reflections for which I > 2σ(I).The crystal structure consists of discrete molecules of neutral complex together with water molecules which are hydrogen bonded into pairs [O ? O separation 2.60 Å]. 0The (H₂0)₂ units do not hydrogen bond to any other atoms. The ruthenium coordination is octahedral with trans carbene and isocyanide, cis iodides, and cis phosphine and carbonyl ligands. The Ru-donor distances are 2.776(2) [I trans to -PPh₃], 2.782(1) [I trans to -CO], 2.342(4) [PPh₃], 1.855(15) [CO], 2.046(15) [C(carbene)], and 1.998(16) Å [C(isocyanide)]. The bond lengths are discussed in terms of the trans effects of the ligands. The C(carbene)-N distance is 1.26(2) Å and the Ru—C(carbene)—N angle is 141.5(5)°.     

Preparation and configurational isomerism of ditertiary stibine sulfides, (C6H5)(CH3)(S)SbCH2Sb(CH3)(C6H5) and [(C6H5)(CH3)(S)Sb]2(CH2)3

Asymmetric ditertiary stibine sulfides (C₆H₅)(CH₃)(S)SbCH₂Sb(CH₃)(C₆H₅) and [(C₆H₅)(CH₃)(S)Sb]₂(CH₂)₃ have been prepared. It was found that they exist as only one of two possible diastereomers in the crystalline state. However, isomerization to the other form takes place in solution, resulting in an equilibrium mixture. A possibility of configurational lability of tertiary stibine sulfide was suggested for the first time.     

Diorganotin(IV) complexes of dideprotonated pyridoxine (PN, vitamin B6). The crystal structures of [SnEt2(PN-2H)] · CH3OH, [SnEt2(PN-2H)(DMSO)] and [SnBu2(PN-2H)]

The reactions of dimethyl-, diethyl- and dibutyltin(IV) oxides with pyridoxine (PN) in toluene/ethanol led to the formation of compounds [SnR₂(PN-2H)] which were characterized by EI and FAB mass spectrometry and by IR, Raman, Mössbauer and ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. The structures of [SnEt₂(PN-2H)] · CH₃OH, [SnBu₂(PN-2H)] and [SnEt₂(PN-2H)(DMSO)] were determined by X-ray diffractometry. The first two contain dimeric [SnR₂(PN-2H)]₂ units in which two bridging-chelating pyridoxinate anions link the Sn atoms, while in [SnEt₂(PN-2H)(DMSO)] the DMSO coordinates to the tin atom via its O atom in a similar dimeric unit.     

Protonolysis of the PtC bond in trans-[PtH(CH2CN)(PPh3)2]

The protonolysis of the PtC bond in trans-[PtH(CH₂CN)(PPh₃₂] in methanol/1,2- dichloroethane is shown to take place by a two step mechanism involving oxidative addition to the metal center followed by reductive elimination of CH₃CN to give trans-[PtHCl(PPh₃)₂].     

Die Kristallstrukturen der Azido‐Platinate (AsPh4)2[Pt(N3)4] und (AsPh4)2[Pt(N3)6]

Crystal Structures of the Azido Platinates (AsPh₄)₂[Pt(N₃)₄] and (AsPh₄)₂[Pt(N₃)₆] The crystal structures of the two homoleptic azido platinates (AsPh₄)₂[Pt(N₃)₄] ( 1 ) and (AsPh₄)₂[Pt(N₃)₆] ( 2 ) were determined by X‐ray diffraction at single crystals. In 1 the [Pt(N₃)₄]^2– ions are without crystallographic site‐symmetry, and the platinum atoms show a planar surrounding. The [Pt(N₃)₆]^2– ions in 2 are centrosymmetric (C_i) with an octahedral surrounding at the platinum atoms. While 1 is highly explosive, 2 is of significantly greater stability. This behaviour is explained by the packing conditions. 1 : Space group P2₁/n, Z = 6, lattice dimensions at –80 °C: a = 1045.3(1), b = 1620.2(1), c = 4041.0(3) pm; β = 96.70(1)°; R₁ = 0.0654. 2 : Space group P1, Z = 1, lattice dimenstions at –80 °C: a = 1027.6(1), b = 1049.1(2), c = 1249.9(3) pm; α = 88.27(1)°, β = 74.13(1)°, γ = 67.90(1)°; R₁ = 0.0417.     

Bimetallic single-source precursors [M(NH3)4][Co(C2O4)2(H2O)2]·2H2O (M = Pd, Pt) for the one run synthesis of CoPd and CoPt magnetic nanoalloys

All the steps of the proposed technique, from the synthesis of single-source precursors to the preparation of CoPd and CoPt nanoalloys, are described. The double complex salts (DCS) [M(NH₃)₄][Co(C₂O₄)₂(H₂O)₂]·2H₂O (M = Pd, Pt), which were synthesized by mixing solutions containing [M(NH₃)₄]²⁺ cations and [Co(C₂O₄)₂(H₂O)₂]²⁻ anions, have been used as precursors. The salts obtained were characterized by IR spectroscopy, thermal analysis, XRD and single crystal X-ray diffraction. The prepared compounds crystallize in the monoclinic (space group I2/m, M = Pd) and orthorhombic (space group I222, M = Pt) crystal systems. Thermal decomposition of the salts in helium or hydrogen atmosphere at 200-600 °C results in the formation of nanoalloys powders (random solid solution Co_0.50Pd_0.50 and chemically ordered CoPt). The size of the bimetallic particles varied from 5 to 20 nm. Order-disorder structural transformations in Co_0.50Pt_0.50 nanoalloys were studied. The magnetic properties of both chemically disordered Co_0.50Pd_0.50 and ordered CoPt clusters have also been measured.     

Kinetic study of the oxidative addition reaction between methyl iodide and [Rh(FcCOCHCOCF3)(CO)(PPh3)]: Structure of [Rh(FcCOCHCOCF3)(CO)(PPh3)(CH3)(I)]

The kinetics of oxidative addition of CH₃I to [Rh(FcCOCHCOCF₃)(CO)(PPh₃)], where Fc = ferrocenyl and (FcCOCHCOCF₃)⁻ = fctfa = ferrocenoylacetonato, have been studied utilizing UV/Vis, IR, ¹H and ³¹P NMR techniques. Three definite sets of reactions involving isomers of at least two distinctly different classes of Rh^III-alkyl and two different classes of Rh^III-acyl species were observed. Rate constants for this reaction in CHCl₃ at 25 °C, applicable to the reaction sequence below, were determined as k₁ = 0.00611(1) dm³ mol⁻¹ s⁻¹, k₋₁ = 0.0005(1) s⁻¹, k₃ = 0.00017(2) s⁻¹ and k₄ = 0.0000044(1) s⁻¹ while k₋₃ ? k₃ and k₋₄ ? k₄ but both ≠0. The indeterminable equilibrium K₂ was fast enough to be maintained during Rh^I depletion in the first set of reactions and during the Rh^IIIalkyl2 formation in the second set of reactions. From a ¹H and ³¹P NMR study in CDCl₃, K_c1 was found to be 0.68, K_c2 = 2.57, K_c3 = 1.00, K_c4 = 4.56 and K_c5 = 1.65.