Organoselenium(II) and selenium(IV) compounds containing 2-(Me2NCH2)C6H4 moieties: solution behavior and solid state structure

The cleavage of the Se-Se bond in [2-(Me₂NCH₂)C₆H₄]₂Se₂ (1) was achieved by treatment with SO₂Cl₂ (1:1 molar ratio) or elemental halogens to yield [2-(Me₂NCH₂)C₆H₄]SeX [X = Cl (2), Br (3), I (4)]. Oxidation of 1 with SO₂Cl₂ (1:3 molar ratio) gave [2-(Me₂NCH₂)C₆H₄]SeCl₃ (5). [2-(Me₂NCH₂)C₆H₄]SeS(S)CNR₂ [R = Me (6), Et (7)] were prepared by reacting [2-(Me₂NCH₂)C₆H₄]SeBr with Na[S₂CNR₂] · nH₂O (R = Me, n = 2; R = Et, n = 3). The reaction of 3 with K[(SPMe₂)(SPPh₂)N] resulted in isolation of [2-(Me₂NCH₂)C₆H₄]Se-S-PMe₂N-PPh₂S (8). The compounds were characterized by solution NMR spectroscopy (¹H, ¹³C, ³¹P, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 4-8 were established by single crystal X-ray diffraction. All compounds are monomeric, with the N atom of the pendant CH₂NMe₂ arm involved in a three-center-four-electron N?Se-X (X = halogen, S) bond. This results in a T-shaped coordination geometry for the Se(II) atom in 2, 4, 6-8. In 5, the Se(IV) atom achieves a square pyramidal coordination in the mononuclear unit. Loosely connected dimers are formed through intermolecular Se?Cl interactions (3.40 Å); the overall coordination geometry being distorted octahedral. In all compounds hydrogen bonds involving halide or sulfur atoms generate supramolecular associations in crystals.     

Structural study on the organoantimony(III) NCN - Chelated compounds [2,6-(Me2NCH2)2C6H3]SbX2 - Influence of the polar group X

The reactions of organoantimony chloride LSbCl₂ (1) (L = [2,6-(Me₂NCH₂)₂C₆H₃]⁻) with the silver salts of selected carboxylic acids (1:2 molar ratio) resulted to the corresponding organoantimony carboxylates LSbX₂, where X = CH₃COO for (2); CF₃COO for (3). Similar reactions of 1 with the silver salt of the low nucleophilic anion (1:0.5 and 1:1 molar ratio) gave the ionic compounds [LSb(Cl)--Cl-Sb(Cl)L]⁺[CB₁₁H₁₂]⁻ (4), and [LSbCl]⁺[CB₁₁H₁₂]⁻ (5). All compounds were characterized by the help of the elemental analysis, ESI-MS, ¹H, ¹¹B, ¹³C NMR spectroscopy and IR spectroscopy. The solid state structure investigation using single crystal X-ray diffraction technique (3-5) revealed the presence of the strong Sb-N intramolecular dative connections in all cases and also significant differences in the shapes of the coordination polyhedra around the central antimony atoms was observed, i.e. a tetragonal pyramidal environment in 3 (CF₃COO groups are placed mutually in trans positions), an unusual chlorine bridged dinuclear cation consisting of one apex (Cl atom) sharing square pyramids in 4, and finally a vacant ψ-trigonal bipyramid around the central antimony atom in 5. Even more, crystallization of 5 from THF provided the single crystals of a THF aduct of 5 [LSbCl(THF)]⁺[CB₁₁H₁₂]⁻5a, where the central antimony atom is located in a tetragonal pyramidal environment. The solid state structures of 3-5 are retained in solution. Solution structure of the compound 2 was determined by the help of VT-¹H NMR spectroscopy and IR spectroscopy showing, that both carboxylates (CH₃COO) are unidentate and are placed mutually in cis positions in the coordination polyhedron around the central antimony atom. The whole coordination polyhedron in 2 might be best described as a biccaped - trigonal pyramid, due to the additional Sb-N intramolecular interactions.     

Synthesis, structural characterization and reactivity of the amino borane 1-(NPh2)-2-[B(C6F5)2]C6H4

The bright red title compound 1 was synthesized from (2-lithiophenyl)diphenylamine and bis(pentafluorophenyl)boron chloride. Its reactions with small acids like H₂O and HCl proceeded easily giving zwitterionic compounds. For 1 and its water adduct 2 the crystal structures were determined, the latter featuring an ammonium borate structure containing a short intramolecular hydrogen bond bridge. Treatment of 1 with Jutzi's acid, [H(OEt₂)₂][B(C₆F₅)₄], did not result in protonation of the nitrogen, but reaction of 1 with LiH in the presence of 12-crown-4, led to the isolation of the aminoborate [1-(Ph₂N)-2-{B(H)(C₆F₅)₂}C₆H₄][Li(12-crown-4)] (3). Borohydride 3 reacted with Jutzi's acid to regenerate 1 and liberate hydrogen.     

New organomercury(II) compounds containing intramolecular N → Hg interactions: crystal and molecular structure of [2-(Me2NCH2)C6H4]HgCl and [2-(Me2NCH2)C6H4]Hg[S(S)PPh2]

[2-(Me₂NCH₂)C₆H₄]HgCl (1) was prepared by reacting HgCl₂ with [2-(Me₂NCH₂)C₆H₄]Li in diethyl ether. The reactions of 1 with the sodium or ammonium salt of the appropriate thiophosphinato ligand, in 1:1 molar ratio, afford the isolation of [2-(Me₂NCH₂)C₆H₄]Hg[S(S)PR₂] [R=Me (2), Et (3), Ph (4)], [2-(Me₂NCH₂)C₆H₄]Hg[S(O)PPh₂] (5) and [2-(Me₂NCH₂)C₆H₄]Hg[S(S)P(OⁱPr)₂] (6). The compounds were investigated by IR and multinuclear NMR (¹H, ¹³C and ³¹P) spectroscopy. The molecular structures of 1 and 4 were determined by single-crystal X-ray diffraction. Due to the strong intramolecular coordination of the N atom of the pendant CH₂NMe₂ arm [Hg(1)-N(1) 2.764(6) and 2.725(4) Å in 1 and 4, respectively] both compounds exhibit a T-shaped (C,N)HgX core in the molecular unit, with almost linear arrangement of the covalent bonds [C(1)-Hg(1)-Cl(1) 176.93(18)° in 1, and C(1)-Hg(1)-S(1) 169.54(16)° in 4]. The crystals of 1 contain discrete monomeric molecules, while the crystals of 4 contain dimer associations built through asymmetric bridging dithiophosphinato ligands [Hg(1)-S(1) 2.3911(16) Å, Hg(1)?S(2a) 3.102(2) Å], thus resulting in an overall pseudo-trigonal bipyramidal (or seesaw) (C,N)HgS₂ core, with the nitrogen atom and the weekly bonded sulfur atom in equatorial positions [N(1)-Hg(1)?S(2a) 82.01(10)°].     

Synthesis and spectral characterization of diorganodiaminosilanes [(ArNH)2SiPhMe] (Ar = 2,6-Pr2C6H3; 2,4,6-Me3C6H2) and lithium silylamide [(2,6-Et2C6H3NLi)(2,6-Et2C6H3NH)SiPh2]

Aminosilanes bearing bulky substituents on nitrogen centers, [(ArNH)₂SiPhMe] (Ar = 2,6-ⁱPr₂C₆H₃ (1), 2,4,6-Me₃C₆H₂ (2)) and half-sandwich lithium silylamide [(2,6-Et₂C₆H₃NLi)(2,6-Et₂C₆H₃NH)SiPh₂] (3) have been prepared and characterized by elemental analysis, IR, EI mass and NMR (¹H and ²⁹Si) spectroscopic studies. The solid state structures of 2 and 3 have been determined by single crystal X-ray diffraction studies. The molecule 2 has a C₁ symmetry due to the steric crowding, and the two N-H protons are approximately trans to each other. The amido nitrogen atoms in 2 show significant deviation from trigonal-planar geometry, and as a result, the observed Si-N bonds are marginally longer than those observed in aminosilanes with planar nitrogen atoms. The molecule 3 exists as discrete dimer with an inversion center. The Li ion in 3 forms intramolecular π-complex with the neighboring aryl (2,6-Et₂C₆H₃) group, to form a half-sandwich lithium silylamide.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Dimethylindium hydrazides [Me2In-NH-NHR]2 (R = CMe3, C6H5)

Trimethylindium reacted with phenyl- and tert-butylhydrazine by the release of methane and the formation of the corresponding dimethylindium hydrazides (1 and 2, respectively). Both products form dimers and possess four-membered In₂N₂ heterocycles with two exocyclic N-N bonds in their molecular cores. Interestingly, one compound (1) crystallizes with centrosymmetric molecules in which the N-N bonds are located on different sides of the In₂N₂ ring (C_2h), while both N-N bonds are on the same side in 2 (C_2v). In contrast, the reaction of tri(tert-butyl)indium with tert-butylhydrazine yielded a quite unexpected product. Partial decomposition occurred, and in a low yield the adduct of tribenzylindium with the unchanged tert-butylhydrazine was isolated. In a remarkable reaction, the trialkylindium derivative did not react with the relatively acidic hydrazine, but by the release of the corresponding alkane with the solvent toluene.     

Ethynylmonocarba-closo-dodecaborates: M[12-HCC-closo-1-CB11H11] and M[7,12-(HCC)2-closo-1-CB11H10] (M = Cs, [Et4N])

Cesium and tetraethylammonium salts of the ethynyl functionalized monocarba-closo-dodecaborate anions [12-HCC-closo-1-CB₁₁H₁₁]⁻ and [7,12-(HCC)₂-closo-1-CB₁₁H₁₀]⁻ were obtained by desilylation of [Et₄N][12-Me₃SiCC-closo-1-CB₁₁H₁₁] and [Et₄N][7,12-(Me₃SiCC)₂-closo-1-CB₁₁H₁₀], respectively. Their thermal properties were examined by differential scanning calorimetry. The compounds were characterized by multi-NMR, IR, and Raman spectroscopy, (−)-MALDI mass spectrometry, and elemental analysis. Single-crystals of Cs[12-HCC-closo-1-CB₁₁H₁₁] and [Et₄N][7,12-(HCC)₂-closo-1-CB₁₁H₁₀] were studied by X-ray diffraction. The discussion of the spectroscopic and structural properties is supported by data derived from theoretical calculations using density functional theory as well as perturbation theory.     

Preparation and electrochemical behaviour of dinuclear platinum complexes containing NCN ligands (NCN=[C6H3(Me2NCH2)2-2,6]). The crystal structure of [C6H3(Me2NCH2)2-1,3-(CC)-5]2

A series of homodinuclear Pt compounds containing the anionic, potentially terdentate NCN ligand (NCN=[C₆H₃(Me₂NCH₂)₂-2,6]⁻) or its 4-ethynyl derivative were prepared. The two platinum centres are linked together in two different fashions: (i) directly linked by an ethynyl or diethynylphenyl group (head-to-head) and (ii) indirectly bonded by a ethynyl- or butadiynyl-linked bis-NCN ligand (tail-to-tail). The reaction of the head-to-head σ,σ′-ethynylide complex {Pt}CC{Pt} ({Pt}=[Pt(C₆H₃{CH₂NMe₂}₂-2,6)]⁺) with [CuCl]_n yields {Pt}Cl and [Cu₂C₂]_n, while with [Cu(NCMe)₄][BF₄] a Cu(I) bridged complex was formed: [(η²-{Pt}CC{Pt})₂Cu][BF₄]. The results of cyclic voltammetry experiments reveal that both connection modes of the two platinum centres lead to electrochemically independent Pt–NCN units. The X-ray crystal structure analysis of the neutral, tail-to-tail bridging butadiyne bis-NCNH ligand [C₆H₃(CH₂NMe₂)-1,3-(CC)-5]₂ is reported.     

Synthesis, characterization and comparison of group 14 pyrrolides and indolides Ph3MX (M = Si, Ge, Sn; X = C4H4N, C8H6N)

The biologically important heterocycles pyrrole, C₄H₄N, and indole, C₈H₆N, ought to be useful as reagents in organic synthesis. Unfortunately, working with them has proved to be difficult because they tend to self-polymerize in solution, especially in the presence of acid catalysts. When the self-polymerization can be controlled, however, the pyrrole and indole units should provide an important route to selective N-metal binding, particularly when these ligands are activated by alkyl-lithium reagents. Using this approach, a general synthesis of the group 14 pyrrolides and indolides, Ph₃MX (M = Si, Ge, Sn; X = C₄H₄N, C₈H₆N), has been developed and the results are reported here. The compounds are formed as high-melting, white crystalline solids and have been characterized by ¹³C-, ²⁹Si- and ¹¹⁹Sn-NMR, Raman and electron-impact mass spectroscopy as well as elemental analysis. A single-crystal X-ray study of Ph₃Si(C₄H₄N) has shown that the compound is disordered in the tetragonal lattice, even at low temperature (100 K).     

Chiral “P-N-P” ligands, (C20H12O2)PN(R)PY2 [R = CHMe2, Y = C6H5, OC6H5, OC6H4-4-Me, OC6H4-4-OMe or OC6H4-4-Bu] and their allyl palladium complexes

Chiral “P-N-P” ligands, (C₂₀H₁₂O₂)PN(R)PY₂ [R = CHMe₂, Y = C₆H₅ (1), OC₆H₅ (2), OC₆H₄-4-Me (3), OC₆H₄-4-OMe (4) or OC₆H₄-4-^tBu (5)] bearing the axially chiral 1,1′-binaphthyl-2,2′-dioxy moiety have been synthesised. Palladium allyl chemistry of two of these chiral ligands (1 and 2) has been investigated. The structures of isomeric η³-allyl palladium complexes, (R′ = Me or Ph; Y = C₆H₅ or OC₆H₅) have been elucidated by high field two-dimensional NMR spectroscopy. The solid state structure of [Pd(η³-1,3-Ph₂-C₃H₃){κ²-(racemic)-(C₂₀H₁₂O₂)PN(CHMe₂)PPh₂}](PF₆) has been determined by X-ray crystallography. Preliminary investigations show that the diphosphazanes, 1 and 2 function as efficient auxiliary ligands for catalytic allylic alkylation but give rise to only moderate levels of enantiomeric excess.     

Supramolecular structures containing ‘isolated’ pentaborate anions and non-metal cations: Crystal structures of [Me3NCH2CH2OH][B5O6(OH)4] and [4-MepyH, 4-Mepy][B5O6(OH)4]

The solid-state structures of two non-metal pentaborates [Me₃NCH₂CH₂OH][B₅O₆(OH)₄] (1) and [4-MepyH, 4-Mepy][B₅O₆(OH)₄] (2) have been determined by single-crystal X-ray diffraction methods. Structures 1 and 2 both contain supramolecular pentaborate frameworks held together by extensive H-bond interactions. The framework of 1 exists essentially as planes of pentaborate anions linked via three pairwise ‘planar’ β → α interactions, with a fourth β → β interaction crosslinking the planes. The framework of 2 is very similar except that one of the three pairwise linkages within the plane is replaced by pairwise ‘step-like’ bifurcated H-bonds to both α sites of a neighboring anion. The cations in 1 and the cations and neutral 4-Mepy ligands in 2 are present in the framework cavities and channels, with additional H-bond interactions existing between cations and anions.     

One-pot synthesis of the new dianionic ligand [Na]2[C5H4CO2(CH2)2NTs]; preparation and structures of two rhodium derivatives

The new dianionic ligand [Na]₂[C₅H₄CO₂(CH₂)₂NTs] (1) having an alkoxycarbonyl and an amide group in the same side chain has been prepared by a single step, high yield procedure. The synthesis of the related rhodium complexes [Rh{η⁵-C₅H₄CO₂(CH₂)₂N(H)Ts}(NBD)] (3) and [Rh{η⁵-C₅H₄CO₂ (CH₂)₂N(Me)Ts}(NBD)] (4) is reported as well as their X-ray molecular structures.     

The decomposition kinetics of [Et4N]2[M(dmit)2] (M = Ni, Pd) in a nitrogen atmosphere using thermogravimetry

Thermal properties and thermal decompositions of [NEt₄]₂[M(dmit)₂] (M = Ni(II), Pd(II), dmit = 1,3-dithiole-2-thione-4,5-dithiolate) have been studied by thermogravimetry (TG). The TG analysis has shown that the complexes are thermally stable up to 460 K and the decomposition of the complexes occurs in three consecutive stages up to 873 K. A thermal stability scale for [M(dmit)₂]ⁿ⁻ anions was based on the thermal properties. Kinetics parameters, such as activation energy, E_a, and kinetic apparent pre-exponential factor, ln A_app, have been calculated from the thermogravimetric data at heating rates of 10, 15, 20 and 25 K/min involving differential (Friedman's equation) and integral (Flynn-Wall-Ozawa's equation) methods.     

Synthesis of fluorinated trithioether compounds: X-ray structures of 1,3,5-(CH2SRf)3-2,4,6-(CH3)3C6, Rf = C6F5, 4-HC6F4, or 2-FC6H4

A series of three new trithioether compounds containing fluorinated phenyl moieties, 1,3,5-(CH₂SR_f)₃-2,4,6-(CH₃)₃C₆, R_f = C₆F₅ (1), 4-HC₆F₄ (2), or 2-FC₆H₄ (3), were prepared by treatment of 1,3,5-(CH₂Br)₃-2,4,6-(CH₃)₃C₆ with the corresponding Pb(SC₆F₅)₂ or NaSR_f. The new structures were verified by elemental analyses, IR, ¹H NMR, ¹⁹F NMR spectroscopies, and mass spectra. The single crystal X-ray diffraction studies of 1-3 show a similar cis,trans,trans-conformation for the three fluorophenylthiomethyl groups attached to the central benzene ring with all dihedral angles between planes of central ring and external rings close to 0°, giving flat molecules. Comparing, 1-3 with closely related tripodal molecules built-up on 2,4,6-trimethylbenzene, arrangement of one SR group respect to others seems to be defined by the nature of the R substituent. Then in the case of 1-3, a parallel arrangement of rings is favored over an orthogonal one, which would bring the ortho-F atoms close to H atoms of the methylene groups.     

Diphenylbutadiene-bridged gadolinium complex [GdCl2(THF) 3]2(μ-Ph2C4H4) · 3THF: The synthesis and crystal structure

The diphenylbutadiene-bridged gadolinium complex [GdCl₂(THF)₃]₂(μ-Ph₂C₄H₄) · 3THF (1) has been obtained by the reaction of Gd(III) chloride with diphenylbutadienepotassium. The molecular structure of 1 was determined by X-ray diffraction. The complex 1 has a binuclear structure in which a bridging diphenylbutadiene ligand is η⁴-bonded to the Gd atoms connecting two GdCl₂(THF)₃ units. Both Gd atoms have a distorted octahedral environment. At the Gd atom the two Cl atoms are in trans positions and the four other coordination sites are occupied by the three O atoms of THF molecules and the η⁴-bonded C₄H₄ fragment of a diphenylbutadiene ligand. In the two η⁴-bonded GdC₄H₄ fragments one of the Gd-C η⁴-distances is significantly elongated (2.86(3) and 2.97(3) Å) compared with other three (2.65(3)–2.69(3) and 2.67(3)—2.77(3) Å). The magnetic moment of Gd, equal to 8.1 BM, is typical for Gd³⁺ compounds that is evidence for a formal charge of DPBD ligand of −2 in complex 1. However, the expected distribution of the C-C bond of the diene fragment as long—short—long is not realized.     

Synthesis, structure and magnetic behavior of a new three-dimensional Manganese phosphite-oxalate: [C2N2H10][Mn2(OH2)2(HPO3)2(C2O4)]

A novel manganese phosphite-oxalate, [C₂N₂H₁₀][Mn₂^II(OH₂)₂(HPO₃)₂(C₂O₄)] has been hydothermally synthesized and its structure determined by single-crystal X-ray diffraction. The structure consists of neutral manganese phosphite layers, [Mn(HPO₃)]_∞, formed by MnO₆ octahedra and HPO₃ units, cross-linked by the oxalate moieties. The organic cations occupy the middle of the 8-membered one-dimensional channels. Magnetic studies indicate weak antiferromagnetic interactions between the Mn²⁺ ions.