Carbon-carbon and carbon-chlorine bond formation on reaction of iodine(III) reagents with the bis(alkynyl)palladium(II) motif, and structural chemistry of trans-Pd(CC-o-Tol)2(PMe2Ph)2] and trans-[PdCl(CC-o-Tol)(PMe2Ph)2]

Trans-di(ortho-tolylethynyl)bis(dimethylphenylphosphine)palladium(II) reacts above −20 °C with the iodonium reagent IPhCl₂ to give predominantly o-Tol-CC-Cl, above 15 °C with IPh₂(OTf) (OTf = triflate) to give o-Tol-CC-Ph and (o-Tol-CC)₂ in ca. 3:1 ratio, and above 10 °C with IPh(CCR)(OTf) (R = Bu^t, SiMe₃) to give predominantly o-Tol-CC-CC-R and (o-Tol-CC)₂. ³¹P NMR spectra provide evidence for detection of intermediates. The complexes trans-[Pd(CC-o-Tol)₂(PMe₂Ph)₂] and trans-[PdCl(CC-o-Tol)(PMe₂Ph)₂] are obtained on reaction of trans-[PdCl₂(PMe₂Ph)₂] with Li(CC-o-Tol) and o-Tol-CCH/Et₃N, respectively, and have been characterised by X-ray crystallography.     

Solvent and phosphine dependency in the reaction of cis-RuCl2(P-P)2 (P-P = dppm or dppe) with terminal alkynes

Reaction of cis-[RuCl₂(dppm)₂] (dppm = 1,2-bis(diphenylphosphino)methane) with PhCCH and NaPF₆ utilising methanol as solvent results in the formation of the η³-butenynyl complex [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] in good yield. Similar reactions with Bu^tCCH and PrⁿCCH resulted in the corresponding alkyl-substituted complexes and all three of these compounds have been characterised by NMR spectroscopy and X-ray crystallography. The mechanism of this reaction has been probed by employing labelling experiments with both PhCCD and PhC¹³CH allowing the identity of possible intermediates in the reaction to be determined. Furthermore, [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] has been shown to be an effective regio- and stereo-selective catalyst for the dimerisation of PhCCH to Z-PhCCCHCHPh in the absence of solvent. In contrast, no evidence for the formation of alkyne coupling was obtained from the reaction of cis-[RuCl₂(dppe)₂] (dppe = 1,2-bis(diphenylphosphino)ethane) with PhCCH and NaPF₆.     

Some complexes containing carbon chains end-capped by M(CO)2Tp′ [M = Mo, W; Tp′ = HB(pz)3, HB(dmpz)3] groups

Complexes M(CCCSiMe₃)(CO)₂Tp′ (Tp′ = Tp [HB(pz)₃], M = Mo 2, W 4; Tp′ = Tp^∗ [HB(dmpz)₃], M = Mo 3) are obtained from M(CCCSiMe₃)(O₂CCF₃)(CO)₂(tmeda) (1) and K[Tp′].Reactions of 2 or 4 with AuCl(PPh₃)/K₂CO₃ in MeOH afforded M{CCCAu(PPh₃)}(CO)₂Tp′ (M = Mo 5, W 6) containing C₃ chains linking the Group 6 metal and gold centres.In turn, the gold complexes react with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ to give the C₄-bridged {Tp(OC)₂M}CCCC{Co₃(μ-dppm)(CO)₇} (M = Mo 7, W 8), while Mo(CBr)(CO)₂Tp^∗ and Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ give {Tp^∗(OC)₂Mo}C(CC)₂C{Co₃(μ-dppm)(CO)₇} (9) via a phosphine-gold(I) halide elimination reaction. The C₃ complexes Tp′(OC)₂MCCCRu(dppe)Cp^∗ (Tp′ = Tp, M = Mo 10, W 11; Tp′ = Tp^∗, M = Mo 12) were obtained from 2-4 and RuCl(dppe)Cp^∗ via KF-induced metalla-desilylation reactions. Reactions between Mo(CBr)(CO)₂Tp^∗ and Ru{(CC)_nAu(PPh₃)}(dppe)Cp^∗ (n = 2, 3) afforded {Tp^∗(OC)₂Mo}C(CC)_n{Ru(dppe)Cp^∗} (n = 2 13, 3 14), containing C₅ and C₇ chains, respectively. Single-crystal X-ray structure determinations of 1, 2, 7, 8, 9 and 12 are reported.     

Synthesis, structures and some reactions of Ru(CCCCFc)(PP)Cp (PP = dppm, dppe) and related compounds

The compounds Ru(CCCCFc)(PP)Cp [PP = dppe (1), dppm (2)], have been obtained from reactions between RuCl(PP)Cp and FcCCCCSiMe₃ in the presence of KF (1) or HCCCCFc and K[PF₆] (2), both with added dbu. The dppe complex reacts with Co₂(CO)₆(L₂) [L₂ = (CO)₂, dppm] to give 3, 4 in which the Co₂(CO)₄(L₂) group is attached to the outer CC triple bond. The PPh₃ analogue of 3 (5) has also been characterised. In contrast, tetracyanoethene reacts to give two isomeric complexes 6 and 7, in which the cyano-olefin has added to either CC triple bond. The reaction of RuCl(dppe)Cp with HCCCCFc, carried out in a thf/NEt₃ mixture in the presence of Na[BPh₄], gave [Ru{CCC(NEt₃)CHFc}(dppe)Cp]BPh₄ (8), probably formed by addition of the amine to an (unobserved) intermediate butatrienylidene [Ru(CCCCHFc)(dppe)Cp]⁺. The reaction of I₂ with 8 proceeds via an unusual migration of the alkynyl group to the Cp ring to give [RuI(dppe){η-C₅H₄CCC(NEt₃)CHFc}]I₃ (9). Single-crystal X-ray structural determinations of 1, 2 and 4-9 are reported.     

Photochemical reactions of 1-ferrocenyl-4-phenyl-1,3-butadiyne with Fe(CO)5 and CO

Photolysis of a hexane solution containing ironpentacarbonyl, 1-ferrocenyl-4-phenyl-1,3-butadiyne at low temperature yields six new products: [Fe(CO)₂{η²:η²-PhCCCC(Fc)C(CCPh)C(Fc)Fe(CO)₃}-μ-CO] (1), [Fe₂(CO)₆{μ-η¹:η¹:η²:η²-PhCCCC(Fc)-C(O)-C(Fc)CCCPh}] (2), [Fe₂(CO)₆{μ-η¹:η¹:η²:η²-FcCC(CC Ph)-C(O)-C(Fc)CCCPh}] (3), [Fe₂(CO)₆{μ-η¹:η¹:η²:η²-FcCCCC(Fc)-C(O)-C(Fc)CCCPh}] (4), [Fe(CO)₃{μ-η²: η²-[FcCC(CCPh)C(CCPh)C(Fc)}CO] (5) and [Fe(CO)₃{μ-η²: η²-[FcCC(CCPh)C(CCPh)C(Fc)}CO] (6) formed by coupling of acetylenic moieties with CO insertion on metal carbonyl support. In presence of CO, formation of another new product 2,5-bis(ferrocenyl)-3,6-bis(tetracarbonylphenylmaleoyliron)quinone (7) was observed which on further reaction with ferrocenylacetyene gave the quinone, 2,5-bis(ferrocenyl)-3,6-bis(ethynylphenyl)quinone (8). Structures of 1-5 and 8 were established crystallographically.     

On the reactivity of [IrCl(N2)(PPh3)2] with alkynylsilanes - A new route to vinylidene iridium(I) complexes

The iridium dinitrogen complex [IrCl(N₂)(PPh₃)₂] (1) was found to react with alkynylsilanes to form the vinylidene iridium(I) complexes trans- (R/R′ = Ph/Me, 2; Me/Me, 3; Bn/Me, 4; SiMe₃/Me, 5; SiEt₃/Et, 6; ⁱPr/Me, 7) and with Me₃SiCCC(O)R to yield the iridium η²-alkyne complexes trans-[IrCl{η²-Me₃SiCCC(O)R}(PPh₃)₂] (R = OEt, 9; Me, 11). Complex 9 was found to isomerize upon heating or upon UV irradiation yielding the vinylidene complex trans-[IrCl{CC(SiMe₃)CO₂Et}(PPh₃)₂] (10). The reaction of 1 with Me₃SiCCCCSiMe₃ yielded the complex trans-[IrCl{CC(SiMe₃)CCSiMe₃}(PPh₃)₂] (8), whereas with MeO₂CCCCO₂Me the iridacyclopentadiene complex [Ir{C₄(CO₂Me)₄}Cl(PPh₃)₂] (13) was formed. The complexes were characterized by means of ¹H, ¹³C and ³¹P NMR spectroscopy as well as by IR spectroscopy and microanalysis.     

Luminescent rhenium(I)-gold(I) hetero organometallics linked by ethynylphenanthrolines

The first luminescent rhenium(I)-gold(I) hetero organometallics, Re{phenAu(PPh₃)}(CO)₃Cl (3) and Re{(PPh₃)AuphenAu(PPh₃)}(CO)₃Cl (4), have been prepared using the gold(I) complex AuCl(PPh₃) (PPh₃ = triphenylphosphine) and the novel rhenium(I) complexes Re(phenH)(CO)₃Cl (5) (phenH = 3-ethynyl-1,10-phenanthroline) or Re(HphenH)(CO)₃Cl (6) (HphenH = 3,8-bis(ethynyl)-1,10-phenanthroline). All the present rhenium(I) complexes 3-6 were revealed to possess a facial configuration (fac-isomer) with respect to the three carbonyl ligands. The main frameworks for these new gold(I) organometallics were constructed by the Au-C σ-bonding (with the η¹-type coordination) between the ethynylphenanthrolines and the Au(I) phosphine unit. Re(I)-Au(I) heterometallics 3 and 4 have shown single phosphorescence from the ³MLCT excited state and this observation can be interpreted in terms of the efficient intramolecular energy transfer from the Au(I) unit to the Re(I) unit.     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

Germylene complexes of tungsten pentacarbonyls W(CO)5GeCl2 and W(CO)5GeW(CO)5: Electrochemical synthesis and quantum-chemical computations

Convenient synthetic route to prepare the germylene complexes of tungsten pentacarbonyls, W(CO)₅GeCl₂ and W(CO)₅GeW(CO)₅, electrochemically is developed. Combined quantum-chemical/IR spectroscopic approach is used for identification of the synthesized compounds. Good agreement between theoretical and experimental spectra can be regarded as one of the proofs of their supposed structures.     

Preparation, structure and some chemistry of FcCCCCCCRu(dppe)Cp

The synthesis of Fc(CC)₃Ru(dppe)Cp (2) from Fc(CC)₃SiMe₃ and RuCl(dppe)Cp is described, together with its reactions with tcne to give the tetracyano-dienyl FcCCCC{C[C(CN)₂]}₂Ru(dppe)Cp (3) and -cyclobutenyl FcCCCC{CCC(CN)₂C(CN)₂}Ru(dppe)Cp (4), with Co₂(μ-dppm)_n(CO)_8−2n (n = 0, 1) to give FcC₂{Co₂(CO)₆}C₂{Co₂(CO)₆}CCRu(dppe)Cp (5) and FcCCCCC₂{Co₂(μ-dppm)(CO)₄}Ru(dppe)Cp (6), respectively, and with Os₃(CO)₁₀(NCMe)₂ to give Os₃{μ₃-C₂CCCC[Ru(dppe)Cp]}(CO)₁₀ (7). On standing in solution, the latter isomerises to the cyclo-metallated derivative Os₃(μ-H){μ₃-C[Ru(dppe)Cp]CCC[(η-C₅H₃)FeCp]}(CO)₈ (8). X-ray structural determinations of 1, 2, 6 and 7 are reported.     

Iron(II) and iron(III) complexes containing ethynyl thiophene fragments

The synthesis of the new complexes Cp*(dppe)FeCC2,5-C₄H₂SR (Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl; dppe = 1,2-bis(diphenylphosphino)ethane; 2a, R = CCH; 2b, R = CCSi(CH₃)₃; 2c, R = CCSi(CH(CH₃)₂)₃; 3a, R = CC2,5-C₄H₂SCCH; 3c, R = CC2,5-C₄H₂SCCSi(CH(CH₃)₂)₃) is described. The ¹³C NMR and FTIR spectroscopic data indicate that the π-back donation from the metal to the carbon rich ligand increases with the size of the organic π-electron systems. The new complexes were also analyzed by CV and the chemical oxidation of 2a and 3c was carried out using 1 equiv of [Cp₂Fe][PF₆]. The corresponding complexes 2a[PF₆] and 3c[PF₆] are thermally stable, but 2a[PF₆] was too reactive to be isolated as a pure compound. The spectroscopic data revealed that the coordination of large organic π-electron systems to the iron nucleus produces only a weak increase of the carbon character of the SOMO for these new organoiron(III) derivatives.     

Cross-coupling reactions of gold(I) alkynyl and polyyndiyl complexes

Gold(I) alkynyl complexes are shown to efficiently couple with aryl iodides under mild conditions in the presence of both Pd(II) and Cu(I) co-catalysts. The reaction is not gold catalysed, but rather the Au(I) centre serves to transfer the alkynyl moiety to Cu(I), which then enters the conventional Sonogashira cycles. Using this method, a small range of 1,4-disubstituted diynes, including examples of differentially substituted compounds ArCCCCAr′, have been prepared directly from [(Ph₃P)AuCCCCAu(PPh₃)] and aryl iodides ArI.     

Iodo-alkynyl- and iodo-butadiynyl-ruthenium complexes

Addition of [I(py)₂]BF₄ to Ru(CCH)(dppe)Cp∗ gave the iodovinylidene [Ru(CCHI)(dppe)Cp∗]BF₄1, which could be deprotonated to Ru(CCI)(dppe)Cp∗ 2. The attempted preparation of Ru(CCCCI)(dppe)Cp∗, followed by derivatisation with tcne, gave the dienynyl Ru{CCC[C(CN)₂]CIC(CN)₂}(dppe)Cp∗ 3. The Pd(0)/Cu(I)-catalysed reaction of 3 with Ru{CCCCAu(PPh₃)}(dppe)Cp∗ afforded Ru{CCCC(CN)₂CC(CN)₂Au(PPh₃)}(dppe)Cp∗ 4 by formal replacement of I⁺ by [Au(PPh₃)]⁺. XRD structures of 1-4 are reported.     

Synthesis and characterization of bimetallic ruthenium complexes connected through linear (CH)14 chain

Treatment of RuHCl(CO)(PPh₃)₃ with (3E,5E,7E,9E,11E)-HCC-(CHCH)₅- CCH produces [RuCl(CO)(PPh₃)₂]₂[μ-(CHCH)₇]. The later complex reacts with PMe₃ to give [RuCl(CO)(PMe₃)₃]₂[μ-(CHCH)₇], the structure of which has been confirmed by X-ray diffraction. The through-space distance from one Ru to the other is 19.88 Å.     

Nickel alkynyl and allenylidene complexes: Synthesis and properties

Copper-catalyzed reaction of [Cp(PPh₃)NiCl] with the terminal alkynes H-CC-C(O)R (R = O-Menthyl, NMe₂, Ph) yields the alkynyl complexes [Cp(PPh₃)Ni-CC-C(O)R]. Subsequent O-methylation with either [Me₃O]BF₄ or MeSO₃CF₃ affords cationic allenylidene complexes, [Cp(PPh₃)NiCCC(OMe)R]⁺X¯ (X = BF₄, SO₃CF₃). N-Alkylation of Cp(PPh₃)Ni-pyridylethynyl complexes likewise gives cationic allenylidene complexes. [Cp(PPh₃)Ni-CC-C(CH)₄N] adds BF₃ at nitrogen. Modification of the ligand sphere in these nickel allenylidene complexes is possible by replacing PPh₃ by PMe₃ in the alkynyl complex precursors. The first allenylidene(carbene)nickel cation, [Cp(SIMes)NCCC(OMe)NMe₂]⁺, is accessible by successive reaction of [Cp(SIMes)NiCl] with H-CC-C(O)NMe₂ and [Me₃O]BF₄. By the analogous sequence an allenylidene complex containing the chelating (diphenylphosphanyl)ethylcyclopentadienyl ligand can be prepared. DFT Calculations were carried out on the allenylidene complex cation [Cp(PPh₃)NiCCC(OMe)NMe₂]⁺ and on its precursor, the alkynyl complex [Cp(PPh₃)Ni-CC-C(O)NMe₂]. Based on the spectroscopic data and a X-ray structure analysis the bonding in the new nickel allenylidene complexes is best represented by several resonance forms, an alkynyl resonance form considerably contributing to the overall bond.     

Further reactions of some bis(vinylidene)diruthenium complexes

Whereas {Ru(dppm)Cp*}₂(μ-CCCC) (2) is the only product formed by deprotonation of [{Ru(dppm)Cp*}₂{μ(CCHCHC)}]⁺ with dbu, a mixture of 2 with Ru{CCCHCH(PPh₂)₂[RuCp*]}(dppm)Cp* (3) and {Cp*Ru(PPh₂CHCCH-)}₂ (4) is obtained with KOBu^t. A similar reaction with [{Ru(dppm)Cp*}₂{μ(CCMeCMeC)}]⁺ (5) gave Ru{CCCMeCH(PPh₂)₂[RuCp*]}(dppm)Cp* (6). X-ray structures of 4, 5 and 6 confirm the presence of the 1-ruthena-2,4-diphosphabicyclo[1.1.1]pentane moiety, which is likely formed by an intramolecular attack of the deprotonated dppm ligand on C(1) of the vinylidene ligand. Protonation of {Ru(dppe)Cp*}₂(μ-CCCC) (8-Ru) regenerates its precursor [{Ru(dppe)Cp*}₂{μ(CCHCHC)}]²⁺ (7-Ru). Ready oxidation of the bis(vinylidene) complex affords the cationic carbonyl [Ru(CO)(dppe)Cp*]PF₆ (9) (X-ray structure).     

Distinction of Push,pull effect and steric hindrance in disubstituted alkynes

The push,pull effect in two series of disubstituted alkynes was studied at the DFT level [B3LYP/6-311G(d)] by application of the ¹³C chemical shift differences (GIAO) between the alkyne carbon atoms (Δδ_CC), the charge difference between these carbons (Δq_CC), the occupation quotient (NBO) of anti-bonding π^∗, and bonding π orbitals (π^∗_CC/π_CC) and the bond length (d_CC) of the CC triple bond. The linear dependence of d_CC versus π^∗_CC/π_CC quantifies changes in the push,pull effect while deviations from the latter correlation indicate and ascertain quantitatively to what extent steric hindrance restricts the strain-less conjugation of the CC triple bond π-orbitals in the disubstituted alkynes.     

Polymetallation of alkenes: Formation of some complexes containing branched chain carbon-rich ligands

Reactions of {(Ph₃P)AuCC}₂CC{CCAu(PPh₃)}₂ (1b), with Co₃(μ-CBr)(μ-dppm)_n(CO)_9−2n (n = 0, 1) result in complete or partial elimination of AuBr(PPh₃) to give the complexes {(OC)₉Co₃-μ₃-CCC}₂CC{CC-μ₃-CCo₃(CO)₉}₂ (3), trans-{(OC)₇(μ-dppm)Co₃-μ₃-CCC}(HCC)CC{CCAu(PPh₃)}{CC-μ₃-CCo₃(μ-dppm)(CO)₇} (4), {(OC)₇(μ-dppm)Co₃-μ₃-CCC}₂CC(CCH){CC-μ₃-CCo₃(μ-dppm)(CO)₇} (5) and {(OC)₇(μ-dppm)Co₃-μ₃-CCC}₂CC{CCAu(PPh₃)}{CC-μ₃-CCo₃(μ-dppm)(CO)₇} (6), which have been identified by spectroscopic methods and in the cases of 3, 4 and 5, by single-crystal X-ray diffraction methods.     

Synthesis, spectroscopy, structures and photophysics of metal alkynyl complexes and polymers containing functionalized carbazole spacers

A new class of soluble and thermally stable group 10 platinum(II) poly-yne polymers functionalized with 9-arylcarbazole moiety trans-[-Pt(PBu₃)₂CCRCC-]_n (R = 9-arylcarbazole-3,6-diyl; aryl = p-methoxyphenyl, p-chlorophenyl) were prepared in good yields by the polycondensation polymerization of trans-[PtCl₂(PBu₃)₂] with HCCRCCH under ambient conditions. The optical absorption and emission properties of these polymetallaynes were investigated and compared with their bimetallic molecular model complexes trans-[Pt(Ph)(PEt₃)₂CCRCCPt(Ph)(PEt₃)₂] as well as their group 11 gold(I) and group 12 mercury(II) neighbors [(PPh₃)AuCCRCCAu(PPh₃)] and [MeHgCCRCCHgMe]. The structures of all the compounds were confirmed by spectroscopic methods and by X-ray crystallography for selected model complexes. The influence of the heavy metal atom and the 9-aryl substituent of carbazole on the evolution of lowest electronic singlet and triplet excited states is critically characterized. It was shown that the organic-localized phosphorescence emission can be triggered readily by the heavy-atom effect of group 10-12 transition metals (viz., Pt, Au, and Hg) with the emission efficiency generally in the order Pt > Au > Hg. These carbazole-based organometallic materials possess high-energy triplet states of 2.68 eV or higher which do not vary much with the substituent of 9-aryl group.     

Some complexes containing carbon chains end-capped with tungsten or ruthenium groups and tricobalt carbonyl clusters

The Pd(0)/Cu(I)-catalysed reactions between Co₃(μ₃-CBr) (CO)₉ and W(CCCCH)(CO)₃Cp gives the C₅ complex {Cp(OC)₃W}CCCCC{Co₃(CO)₉} (2). Similarly, Co₃(μ₃-CBr)(μ-dppm)(CO)₇ and W(CCCCH)(CO)₃Cp or Ru(CCCCH)(dppe)Cp* give {Cp(OC)₃W}CCCCC{Co₃(μ-dppm)(CO)₇} and {Cp*(dppe)Ru}CCCCC{Co₃(μ-dppmn)(CO)₇} (5). An attempt to prepare a C₃ analogue from Ru(CCH)(PPh₃)₂Cp and Co₃(μ₃-CBr)(CO)₉ gave instead the acyl derivative {Cp(Ph₃P)₂Ru}CCC(O)C{Co₃(CO)₈(PPh₃)} (7). The X-ray structures of 2, 5 and 7 are reported: the C₅ chains in 2 and 5 have an essentially unperturbed -CC-CC-C formulation.