HMB and Cp* ruthenium(II) complexes containing bis- and tris-(mercaptomethimazolyl)borate ligands: Synthetic, X-ray structural and electrochemical studies (HMB = η-C6Me6, Cp* = η-C5Me5)

The reactions of [(HMB)RuCl₂]₂ with K[HB(mt)₃] and Na[H₂B(mt)₂] (mt = N-methyl-2-mercaptoimidazol-1-yl) led to the isolation of [(HMB)Ru{HB(mt)₃}]Cl (1) (ca. 66% yield) and [(HMB)Ru{H₂B(mt)₂}]Cl (2) (ca. 70% yield), respectively. The reaction of [Cp*RuOMe]₂ with Na[H₂B(mt)₂] yielded Cp*Ru[H₂B(mt)₂] (3) (ca. 85% yield). Single crystal X-ray diffraction analyses were carried out on all three complexes, together with cyclic voltammetric measurements.     

Syntheses and characterization of [(η-C6Me6)Ru(μ-N3)(X)]2 (X = N3 and Cl) complexes and their reactions towards mono- and bidentate ligands

The reaction of the complex [{(η⁶-C₆Me₆)Ru(μ-Cl)Cl}₂] 1 with sodium azide ligand gave two new dimers of the composition [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2 and [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3, depending upon the reaction conditions. Complex 3 with excess of sodium azide in ethanol yielded complex 2. These complexes undergo substitution reactions with monodentate ligands to yield monomeric complexes of the type [(η⁶-C₆Me₆)Ru(X)(N₃)(L)] {X = N₃, Cl, L = PPh₃ (4a, 9a); PMe₂Ph (4b, 9b); AsPh₃ (4c, 9c); X = N₃, L = pyrazole (Hpz) (5a); 3-methylpyrazole (3-Hmpz) (5b) and 3,5-dimethyl-pyrazole (3,5-Hdmpz) (5c)}. Complexes 2 and 3 also react with bidentate ligands to give bridging complexes of the type [{(η⁶-C₆Me₆)Ru(N₃)(X)]₂(μ-L)} {X = N₃, Cl, L = 1,2-bis(diphenylphosphino)methane (dppm) (6, 10); 1,2-bis(diphenylphosphino)ethane (dppe) (7, 11); 1,2-bis(diphenylphosphino)propane (dppp) (8, 12); X = Cl, L = 4,4-bipyridine (4,4′-bipy) (13)}. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as by analytical data.The molecular structures of the representative complexes [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2, [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3,[(η⁶-C₆Me₆)Ru(N₃)₂(PPh₃)] 4a and [{(η⁶-C₆Me₆)Ru(N₃)₂}₂ (μ-dppm)] 6 were established by single crystal X-ray diffraction studies.     

Hydrogenation of cyclohexene catalyzed by ruthenium nitrosyl complexes: Crystal structures of catalyst precursors [CpRu(μ2-NO)2RuCp] and [CpRu(NO)(η-C6H10)] (Cp = η-C5(CH3)5)

Hydrogenation of cyclohexene with 0.1 mol% of the (nitrosyl)ruthenium catalyst [Cp^∗Ru(NO)(C₆H₅)₂] (1; Cp^∗ = η⁵-C₅(CH₃)₅) under 1.0 MPa of H₂ in water at 90 °C for 13 h afforded cyclohexane in 94% yield. The nitrosyl-bridged dinuclear complex [Cp^∗Ru(μ₂-NO)₂RuCp^∗] (2) and the mononuclear cyclohexene complex [Cp^∗Ru(NO)(η²-C₆H₁₀)] (3), which also serve as catalyst precursors, have been obtained from the reaction mixture. X-ray crystallographic analyses of 2 and 3 have revealed that the bridging nitrosyl ligands in 2 form an almost planar Ru₂N₂ four-membered ring with the Ru–Ru distance of 2.5366(5) Å, whereas the nitrosyl ligand in 3 is linear. On the other hand, a ruthenium complex without a nitrosyl ligand [Cp^∗Ru(CH₃CN)₃][OSO₂CF₃] proved to be less effective for this hydrogenation.     

Trimetallic complexes containing 1,1′-Rc′(CC)2 units [Rc′ = ruthenocene-1,1′-diyl, Ru(η-C5H4-)2]

Reactions between 1,1′-(Me₃SiCC)₂Rc′ [Rc′ = ruthenocen-1,1′-diyl, Ru(η-C₅H₄-)₂] and RuCl(PP)Cp′ in the presence of KF gave 1,1′-{Cp(PP)RuCC}₂Rc′ [Cp′ = Cp, PP = PPh₃1, P(m-tol)₃2, dppe 3, dppf 4; Cp′ = Cp^∗, PP = dppe 5]. Compounds 1 and 2 react with tcne to give two diastereomers a/b of the allylic (vinylcarbene) complexes 6 and 7, while methylation of 5 gave the bis-vinylidene [1,1′-{Cp^∗(dppe)RuCCMe}₂Rc′](BPh₄)₂ (8). The X-ray structures of 4, 6b and 8 have been determined. Cyclic voltammograms indicate that there is some electronic communication between the ruthenium end-groups through the Rc′ centre.     

Synthesis and structure of the monometallic cationic complex [Cp(CO)2Fe{η-(CH2CHCH2CH3)}]PF6 (Cp = η-C5H5)

The bimetallic carbocation complex [{Cp(CO)₂Fe}₂(μ-C₄H₇)]PF₆ reacted with trifluoroacetic acid to give the mononuclear cationic complex [Cp(CO)₂Fe{η²-(CH₂CHCH₂CH₃)}]PF₆, which formed yellow orthorhombic crystals in the space group P2₁2₁2₁ with a = 7.652(4), b = 13.422(7), c = 14.037(7); α = β = γ = 90.00 and Z = 4. The carbocation is coordinated to the metal in a η²-fashion forming a chiral metallacyclopropane type structure. The β-CH carbon (C9) is disordered over two positions (C9A and C9B), each having about 50% occupancy. This is attributed to there being both the R and S enantioface isomers in equal amounts in the crystal sample. NMR data indicate that the metallacyclopropane structure observed in the solid state is preserved in solution.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

New ferrocenylmethylphosphines - Preparation, characterisation and coordination chemistry of PH(CH2Fc)2, P(CH2Fc)3 [Fc = Fe(η-C5H5)(η-C5H4)] and their derivatives

The new ferrocenylmethylphosphines PH(CH₂Fc)₂ (1) [Fc = Fe(η⁵-C₅H₅)(η⁵-C₅H₄)] and P(CH₂Fc)₃ (2) and the phosphonium salt [P(CH₂Fc)₃(CH₂OH)]I (3) were synthesised from P(CH₂OH)₃ and [FcCH₂NMe₃]I. [P(CH₂Fc)(CH₂OH)₃]Cl (4) was obtained from P(CH₂Fc)(CH₂OH)₂, CH₂O and HCl. The new phosphines and phosphonium salts were fully characterised by NMR and IR spectroscopy and MS. [Mo(CO)₆] reacts with 1 to give [Mo(CO)₅{PH(CH₂Fc)₂}] (5) in high yield, but attempts to employ 2 as a ligand failed. The reaction of [P(CH₂Fc)₃(CH₂OH)]I (3) and [PH(CH₂Fc)₃]I (obtained in situ from 3 and Na₂S₂O₅) with [WI₂(CO)₃(NCMe)₂] gave the complex salts [P(CH₂Fc)₃(CH₂OH)][WI₃(CO)₄] (6) and [PH(CH₂Fc)₃][WI₃(CO)₄] (7), respectively. [P(CH₂Fc)₄]I (8) was synthesized from PH₂CH₂Fc and [FcCH₂NMe₃]I. Crystal structures were obtained for 1, 3-8.     

Synthesis and properties of carboxy-substituted half-sandwich ruthenium complexes with chelating bisphosphine ligands (η-C5H4CO2H)Ru(η-L)X (X = I, H)

Several Ru(II) complexes (η⁵-C₅H₄CO₂H)Ru(η²-L)I have been prepared by the hydrolysis of the ester linkage in (η⁵-C₅H₄CO₂t-Bu)Ru(η²-L)Cl with trimethylsilyl iodide. The hydrides (η⁵-C₅H₄CO₂H)Ru(η²-L)H may be prepared by reduction of the iodide complexes in KOH/MeOH solutions followed by acidification. Complexes with several chelating bisphosphine ligands have been prepared in this way. The carboxylate anions [(η⁵-C₅H₄CO₂)Ru(η²-L)H]⁻ are readily protonated by weak acids to give the carboxyCp complexes. The pK_a of the carboxy proton of (η⁵-C₅H₄CO₂H)Ru(dppe)H (dppe = 1,2-bis(diphenylphosphino)ethane) is 11.3 in DMSO. Protonation of the neutral hydride complex (η⁵-C₅H₄CO₂H)Ru(dppf)H gives the cationic dihydride (η⁵-C₅H₄CO₂H)Ru(dppf)H⁺₂; the dihydride structure has been confirmed by measuring the T₁ of its ¹H NMR hydride resonance over a range of temperatures. The oxidations of the halide complexes (η⁵-C₅H₄CO₂H)Ru(dppf)I and (η⁵-C₅H₄CO₂t-Bu)Ru(dppf)Cl (dppf = 1,1′-bis(diphenylphosphino)ferrocene) have been studied by cyclic voltammetry.     

Reactions of diferrocenyl dichalcogenides with [W(CO)5(THF)]: X-ray crystal structures of Fc2Te2 and [W2(μ-SeFc)2(CO)8] (Fc = [Fe(η-C5H5)(η-C5H4)])

Treatment of [W(CO)₅THF] with diferrocenyl diselenide, Fc₂Se₂, yielded the novel metal-metal bonded tungsten(I) complex, [W₂(μ-SeFc)₂(CO)₈] (1: Fc = ferrocenyl, [Fe(η⁵-C₅H₅)(η⁵-C₅H₄)]), which was characterised by NMR and IR spectroscopy, mass spectrometry, and X-ray crystallography. The corresponding tellurium derivative could not be prepared by an analogous route. The X-ray crystal structure of Fc₂Te₂ has also been determined.     

Atom-transfer radical reactions catalyzed by a coordinatively unsaturated diruthenium amidinate, [(η-C5Me5)Ru(μ2-i-PrNC(Me)Ni-Pr)Ru(η-C5Me5)]

Atom-transfer radical cyclization (ATRC) and addition (ATRA) catalyzed by a coordinatively unsaturated diruthenium amidinate complex 4, [(η⁵-C₅Me₅)Ru(μ₂-i-PrNC(Me)Ni-Pr)Ru(η⁵-C₅Me₅)]⁺, are investigated, and their features are compared with those of atom-transfer radical polymerization (ATRP). As an example of ATRC, a cationic diruthenium amidinate 4 is found to exhibit excellent catalytic reactivity for the cyclization of N-allyl α-halogenated acetamides including an alkaloid skeleton at ambient temperature. A catalytic species generated in situ from a halide complex, (η⁵-C₅Me₅)Ru(μ₂-i-PrNC(Me)Ni-Pr)Ru(η⁵-C₅Me₅)(X) [X=Cl, Br] and sodium salts of weakly coordinating anions such as NaPF₆ and NaBPh₄ also shows high catalytic activity; this actually provides a solution for a problematic instability of 4 as the practical catalyst. The in situ-generated catalyst species 4 is also active towards the intermolecular ATRA of α,α,γ-trichlorinated γ-lactam with alkenes at rt to afford the corresponding α-alkylated γ-lactams in moderate yields. Examination of ATRP of methyl methacrylate (MMA) showed that both the isolated 4 [Y=PF₆] and in situ-generated 4 [Y=PF₆] are effective for the polymerization of MMA in the presence of 2-bromoisobutylate as the initiator. Use of the isolated catalyst results in controlled polymerization at initial stage of the reaction; in contrast, the polymerization with in situ-generated catalyst produces poly(MMA) with wide molecular weight distribution. The isolated catalyst 4 is powerful for the activation of a C-Br bond of macromolecule initiators; BrCMe₂CO₂[O(CH₂)₄]_n-n-Bu (M_n=3800; M_w/M_n=1.2) initiated ATRP of MMA even at 25 °C to afford the poly(THF)-poly(MMA) block copolymer of M_n=26,000 and M_w/M_n=1.2 with the aid of 4. The roles of the coordinatively unsaturated ruthenium species for these reactions are discussed.     

Spin fluctuations and orbital ordering in quasi-one-dimensional α-Cu(dca)2(pyz) {dca = dicyanamide = N(CN)2; pyz = pyrazine}, a molecular analogue of KCuF3

The magnetic properties of α-Cu(dca)₂(pyz) were examined by magnetic susceptibility, magnetization, inelastic neutron scattering (INS), muon-spin relaxation (μSR) measurements and by first-principles density functional theoretical (DFT) calculations and quantum Monte Carlo (QMC) simulations. The χ versus T curve shows a broad maximum at 3.5 K, and the data between 2 and 300 K is well described by an S = 1/2 Heisenberg uniform chain model with g = 2.152(1) and J/k_B = −5.4(1) K. μSR measurements, conducted down to 0.02 K and as a function of longitudinal magnetic field, show no oscillations in the muon asymmetry function A(t). This evidence, together with the lack of spin wave formation as gleaned from INS data, suggests that no long-range magnetic order takes place in α-Cu(dca)₂(pyz) down to the lowest measured temperatures. Electronic structure calculations further show that the spin exchange is significant only along the Cu–pyz–Cu chains, such that α-Cu(dca)₂(pyz) can be described by a Heisenberg antiferromagnetic chain model. Further support for this comes from the M versus B curve, which is strongly concave owing to the reduced spin dimensionality. α-Cu(dca)₂(pyz) is a molecular analogue of KCuF₃ owing to d_x2-y2${\text{d}}_{x^2-y^2}$ orbital ordering where nearest-neighbor magnetic orbital planes of the Cu²⁺ sites are orthogonal in the planes perpendicular to the Cu–pyz–Cu chains.     

Transformation of C2 units on a bimetallic tetranuclear cluster.: Reactivity of [Ru3Mo(μ3-η-CC)(μ-CO)3(CO)2(η-C5H4R)3(η-C5H5)] (R = H, Me)

The reactivity of [Ru₃Mo(μ₄-η²-CC)(μ-CO)₃(CO)₂(η-C₅H₄R)₃(η-C₅H₅)] (R = H; Me) have been investigated, initially to elucidate the nature of the starting material, and, latterly, to define the reactivity of an interesting ethane-1,2-bis(ylidyne) species. While the mixed RuMo clusters were unreactive towards simple electrophiles and carbonyl substitution by phosphine ligands they did react with atmospheric oxygen or carbon monoxide to give substantially different products. In all instances oxygen was incorporated either at the metal centre or at the C₂ fragment. High-pressure carbonylations yielded [Ru₃(μ-CO)₃(η-C₅H₅)₃(μ₃-C-C(O)O{Ru(CO)₂(η-C₅H₅)})] and [{Ru₂(μ-CO)(CO)₂(η-C₅H₄Me)₂}(μ₄-η²-CC){Ru(CO)(η-C₅H₄Me)Mo(η-C₅H₅)(=O)(μ-O)}], an ethane-1,2-bis(ylidene) complex, this exemplifying a relatively rare raft geometry which further reacted with Cl₂CCCl₂ to give [Mo₃(μ₄-C₂(Ru(CO)₂(η-C₅H₄Me))(CO)(μ-CO)(η-C₅H₅)₃(Cl)₂] having a similar geometry and undergone halogenation. In order to extend the extant examples of these raft clusters we explored the reaction of [{Ru(CO)₂(η-C₅H₄R)₂}₂(μ-C₂)] with [{Ru(CO)₂(η-C₅H₅)₂}₂] to provide a rational synthetic pathway leading to very reactive [Ru(μ₄-η²-CC)(μ₂-CO)₂(CO)₄(η-C₅H₄Me)₂(η-C₅H₄R)₂] rafts.     

Tetramethyl(perfluoroalkyl)cyclopentadienyl rhodium(I) complexes with ethylene or diene ligands. Crystal structure of [(η-C5Me4C6F13)Rh(CO)2]

Tetramethyl(perfluoroalkyl)cyclopentadienyl rhodium(I) complexes with ethylene or diene (norbornadiene, cycloocta-1,5-diene, 2,3-dimethylbuta-1,3-diene, cyclohexa-1,3-diene) ligands were obtained by reduction of tetramethyl(perfluoroalkyl)rhodium(III) dichloro dimers by zinc in THF or by propan-2-ol/sodium carbonate in the presence of the ligands. Reduction in the presence of cycloocta-1,3-diene gave a different product, an η³-cyclooctenyl complex, which was not reduced further. During the reduction in the presence of ethylene, a new tetramethyl(perfluoroalkyl)-η⁴-cyclopentadiene complex was observed by NMR. This compound, formed by hydrogen transfer from the metal to the ligand, is probably in an equilibrium with the parent hydridocyclopentadienyl complex. Crystal and molecular structure of dicarbonyltetramethyl(perfluorohexyl)cyclopentadienylrhodium(I) complex was determined by X-ray diffraction. The structure shows a moderate ring slippage of the rhodium atom which was not observed in the only other known structure of a complex with the same ligand, the rhodium(III) dichloro dimer.     

Protonation of the lithio derivatives of the 1,2,4-tri-phosphaferrocenes, [LiFe(η-P2C2Bu2PBu)(η-C5R5)] (R = H, Me): Crystal and molecular structure of [Fe(η-P3C2Bu2BuH)(η-C5Me5)]

A new synthetic route is described to generate the 4-centre-5 electron donor ring system (P₃C₂^tBu₂BuH), via protonation of the lithium salts [LiFe(η⁴-P₂C₂^tBu₂PBu)(η⁵-C₅R₅)] (R = H, Me). The molecular structure of [Fe(η⁴-P₃C₂^tBu₂BuH)(η⁵-C₅R₅)] (R = Me) has been determined by a single crystal X-ray study.     

Syntheses and crystal structures of [Bu3SbCr(CO)5], [Bu3BiM(CO)5] (M = Cr, W), and [Bu3BiMnCp′(CO)2] (Cp′ = η-C5H4CH3)

Syntheses and crystal structures of [^tBu₃SbCr(CO)₅] (1), [^tBu₃BiM(CO)₅] [M = Cr (2), W (3)] and [^tBu₃BiMnCp′(CO)₂] (4) (Cp′ = η⁵-C₅H₄CH₃) are reported.     

Facile synthesis and X-ray structures of (η-C5Me5)Ti(OAr)3 (OAr = OC6F5, OCH2C6F5, and OCH2C6F2H3)

New half-sandwich titanocene complexes (η⁵-C₅Me₅)Ti(OC₆F₅)₃ (1), (η⁵-C₅Me₅)Ti(OCH₂C₆F₅)₃ (2), and (η⁵-C₅Me₅)Ti(OCH₂C₆F₂H₃)₃ (3) were synthesized via the displacement of methoxide ligands in (η⁵-C₅Me₅)Ti(OMe)₃ by the corresponding aryloxy or benzyloxy ligands. These compounds have been fully characterized by various spectroscopic methods including X-ray crystallography. Compound 1 has a distorted three-legged piano stool structure. However, complexes 2 and 3 have the chariot-like structure, where chariot means a two-wheeled horse-drawn vehicle. The π electron donation of oxygen atom to Ti center in complexes 1-3 is considerable.     

Intermolecular versus intramolecular C-H activation reaction in the thermolysis of [Ru(Me)Cp*(PMe2Ph)2] (Cp* = η-C5Me5): formation and crystallographic characterisation of [Ru(Ph)Cp*(PMe2Ph)2]

Thermolysis of the ruthenium complex [Ru(Me)Cp*(PMe₂Ph)₂] (1) (Cp* = η⁵-C₅Me₅) in benzene gives methane and [Ru(Ph)Cp*(PMe₂Ph)₂] (2), which is converted slowly to (3) through the loss of benzene. 2 was structurally characterised by single-crystal X-ray diffraction experiments. DFT calculations were performed in order to understand the behaviour of the ruthenium complex 1 towards inter- or intra-molecular C-H bond activation reactions.     

Unsaturation in binuclear cyclopentadienylchromium carbonyl thiocarbonyls: Viability of (η-C5H5)2Cr2(CS)2(CO)3 in contrast to (η-C5H5)2Cr2(CO)5

The cyclopentadienylchromium carbonyl thiocarbonyls Cp₂Cr₂(CS)₂(CO)_n (n = 4, 3, 2, 1) have been studied by density functional theory using the B3LYP and BP86 functionals. The lowest energy Cp₂Cr₂(CS)₂(CO)₄ structure can be derived from the experimentally characterized unbridged Cp₂Cr₂(CO)₆ structure by replacing the two terminal carbonyl groups furthest from the Cr-Cr bond with two terminal CS groups. The two lowest energy Cp₂Cr₂(CS)₂(CO)₃ structures have a single four-electron donor η²-μ-CS group and a formal Cr-Cr single bond of length ∼3.1 Å. In contrast to the carbonyl analogue Cp₂Cr₂(CO)₅ these Cp₂Cr₂(CS)₂(CO)₃ structures are viable with respect to disproportionation into Cp₂Cr₂(CS)₂(CO)₄ and Cp₂Cr₂(CS)₂(CO)₂ and thus are promising synthetic targets. The lowest energy Cp₂Cr₂(CS)₂(CO)₂ structures have all two-electron donor CO and CS groups and short CrCr distances around ∼2.3 Å suggesting the formal triple bonds required to give the chromium atoms the favored 18-electron configurations. These Cp₂Cr₂(CS)₂(CO)₂ structures are closely related to the known structure for Cp₂Cr₂(CO)₄. In addition, several doubly bridged structures with four-electron donor η²-μ-CS bridges are found for Cp₂Cr₂(CS)₂(CO)₂ at higher energies. The global minimum Cp₂Cr₂(CS)₂(CO) structure is a triply bridged triplet with a CrCr triple bond (2.299 Å by BP86). A higher energy singlet Cp₂Cr₂(CS)₂(CO) structure has a shorter Cr-Cr distance of 2.197 Å (BP86) suggesting the formal quadruple bond required to give each chromium atom the favored 18-electron configuration.     

Cyclopentadienyl chromium and tungsten complexes with halide, methyl and σ-phenylethynyl ligands: Structures of (η-C5H5)Cr(NO)2(-CC-C6H5), (η-C5H5)Cr(NO)2I and [(η-C5H4)-COOCH3]W(CO)3Cl

With copper(I) iodide as catalyst, σ-alkynyls, compounds (η⁵-C₅H₅)Cr(NO)₂(CC-C₆H₅) (5), [(η⁵-C₅H₄)-COOCH₃]Cr(NO)₂(CC-C₆H₅) (10), and [(η⁵-C₅H₄)-COOCH₃]W(CO)₃(CC-C₆H₅) (13), were prepared from their corresponding metal chloride 1, 6 and 12. Structures of compound 3, 5 and 12 have been solved by X-ray diffraction studies. In the case of 5, there is an internal mirror plane passing through the phenylethynyl ligand and bisecting the Cp ring. The phenyl group is oriented perpendicularly to the Cp with an eclipsed conformation. The twist angle is 0° and 118.4° for -CC-Ph and two NO ligands, respectively. The orientation is rationalized in terms of orbital overlap between ψ₃ of Cp, dπ of Cr atom, and π^∗ of alkynyl ligand, and complemented by molecular orbital calculation. The opposite correlation was observed on the chemical shift assignments of C(2)-C(5) on Cp ring in compounds 6 and 12, using HetCOR NMR spectroscopy. The electron density distribution in the cyclopentadienyl ring is discussed on the basis of ¹³C NMR data and compared with the calculations via density functional B3LYP correlation-exchange method.