Formation of Isolated Single-Atom Pd1 Sites on the Surface of Pd–Ag/Al2O3 Bimetallic Catalysts

Kinetics and Catalysis - The structure of Pd–Ag/Al2O3 samples with different Ag/Pd ratios has been studied by a complex of physicochemical methods (H2-TPR, XRD, H2-TPD, TEM). Catalysts have...     

Effects of Ag Atomic Segregation from Different Planes on the Size-Dependent Melting of Ag–Pd Clusters

This paper studies the effects of Ag atomic segregation from the inner (100) or (111) planes on the melting of Ag–Pd clusters with different sizes by a molecular dynamics simulation. The results show that Ag segregation leads to the atomic energy decreases with increasing the temperature. Furthermore, the effect of the (100) segregation is larger than that of the (111) segregation. Meanwhile, the influence of segregation on the energy decreases with increasing the cluster size. The melting points of the clusters without segregation are the largest, followed by the clusters with a (111) and (100) segregation.     

Surface Modification of Silica Gels as Carrier for AminoacylaseImmobilization

IrnmobilisedaIninoacylaseisanotablecatalystforthekineticresolutionofN-acetyl-D,L-aIninoacidsandquitealotofresearchworkhasbeeninvolvedonaminoacylase~bilisationswithitscarriers.lTheauthorshaverePortedthattheaIninosilicagelspreparedbyanlinProvedmethodwereeffechveforchymotryPsininunobilisahon,'l'butitwasnotproperforaIninoacylasetriobilisahon.InordertodevelopasahsfactorysurfacesmictUreofsilicagelsforaIninoacylasetriobilisation,tWokindsofreactivegrouPs,theN,N-diethylaIninogrouPandthehydroxygr…     

Convenient Method for the Friedel–Crafts Acylation of Benzene Derivatives Using Silver Nitrate as Catalyst

Friedel–Crafts acylation of benzene derivatives such as anisole, toluene, and xylene has been successively carried out using silver nitrate as the catalyst in the presence of an eco friendly solvent (ethyl alcohol). Both benzoyl chloride and acetyl chloride reacted smoothly under the conditions to afford the corresponding ketones in good yield.

Bimetallic Co–Pd alloy nanoparticles as magnetically recoverable catalysts for the aerobic oxidation of alcohols in water

Co–Pd bimetallic alloy nanoparticle catalysts were prepared from CoCl₂, Pd(OAc)₂ and several capping agents with Li(C₂H₅)₃BH. The nanoparticle catalysts were applied to the aerobic oxidation of a variety of alcohols in water to give the corresponding carbonyl products. The catalyst was magnetically recovered and reused for further oxidation. The nanoparticle catalysts were characterized with TEM, ICP, and XPS analyses.     

Hybrid Catalyst for the Selective Synthesis of Fuel Range Hydrocarbons by the Fischer–Tropsch Method

Kinetics and Catalysis - The results of the development of a hybrid catalyst for the one-pot synthesis of liquid hydrocarbons by the Fischer–Tropsch method are presented. The catalyst was...     

Effect of the State of a Surface Layer on the Properties of Pd–P Catalysts in the Hydrogenation of Alkylanthraquinones

Kinetics and Catalysis - X-ray photoelectron spectroscopy (XPS) was used to study the state of the surface layer of a Pd–P catalyst, which exhibits high selectivity in the hydrogenation of...     

The Effects of Surface Modification of ATP on the Performance of CeO2–WO3/TiO2 Catalyst for the Selective Catalytic Reduction of NOx with NH3

Catalysis Surveys from Asia - A series of CeO2–WO3/20%ATP-TiO2 catalysts were synthesized, of which attapulgite (ATP) was modified by different methods. Notably, after ATP was dissociated and...     

Effects of the Different Supports on the Activity and Selectivity of Iron-Cobalt Bimetallic Catalyst for Fischer-Tropsch Synthesis

Silica, alumina, and activated carbon supported iron-cobalt catalysts were prepared by incipient wetness impregnation. These catalysts have been characterized by BET, X-ray diffraction (XRD), and temperature-programmed reduction (TPR). Activity and selectivity of iron-cobalt supported on different carriers for CO hydrogenation were studied under the conditions of 1.5 MPa, 493 K, 630 h-1, and H2/CO ratio of 1.6. The results indicate that the activity, C4 olefin/(C4 olefin C4 paraffin) ratio, and C5 olefin/(C5 olefin C5 paraffin) decrease in the order of Fe-Co/SiO2, Fe-Co/AC1, Fe-Co/Al2O3 and Fe-Co/AC2. The activity of Fe-Co/SiO2 reached a maximum. The results of TPR show that the Fe-Co/SiO2 catalyst is to some extent different. XRD patterns show that the Fe-Co/SiO2 catalyst differs significantly from the others; it has two diffraction peaks. The active spinel phase is correlated with the supports.     

Simple and New Method for the Synthesis of β-Acetamido Ketones on a Solid Surface

Diels–Alder reactions of 3-vinylindoles were carried out with methyl acrylate and N-phenylmaleimide as dienophiles under microwave conditions to furnish unreported tetrahydrocarbazoles regio- and stereoselectively in good yields. Further dehydrogenation resulted in new substituted carbazoles.     

Sulfamic Acid as a Cost-effective Catalyst for Acetolysis of Cyclic Ethers

Sulfamic acid has been used as an efficient catalyst and green alternative for conventional acidic materials to promote the acetolysis reaction of THF to produce 1,4-diacetoxybutane. This method is also applicable in the acetolysis of other cyclic ethers, such as methyl substituted THF and tetrahydropyran and 1,4-dioxane which is less reactivity.     

Decrypting the Controlled Product Selectivity over Ag−Cu Bimetallic Surface Alloys for Electrochemical CO2 Reduction

Electrochemical CO₂ reduction reaction (ECO₂RR) with controlled product selectivity is realized on Ag−Cu bimetallic surface alloys, with high selectivity towards C2 hydrocarbons/alcohols (≈60 % faradaic efficiency, FE), C1 hydrocarbons/alcohols (≈41 % FE) and CO (≈74 % FE) achieved by tuning surface compositions and applied potentials. In situ spectral investigations and theoretical calculations reveal that surface-composition-dependent d-band center could tune *CO binding strengths, regulating the *CO subsequent reaction pathways and then the product selectivity. Further adjusting the applied potentials will alter the energy of participated electrons, which leads to controlled ECO₂RR selectivity towards desired products. A predominant region map, with an indicator proposed to evaluate the thermodynamic predominance of the *CO subsequent reactions, is then provided as a reliable theoretical guidance for the controllable ECO₂RR product selectivity over bimetallic alloys.     

A Novel Method for Modification of SMPU by Micro-phase

A novel method of controlling the shape memory properties of shape memory polyurethane （SMPU） by addition of micro-phase separation promoters including 1-octadecanol （ODO） and liquid paraffin （LP） is reported. The results indicate that the strain recovery temperature and the strain modulus rate （Eg/Er） were increased significantly with addition of small amount of micro-phase separation promoters. Thus it can increase the shape memory fixity rate and other shape memory behaviors of SMPU.     

A Novel Approach for the Surface Modification of Polymeric Membrane with Phospholipid Polymer

A new economic and convenient method to modify the surface of microporous polypropylene (PP) membranes with phospholipid polymer was given. The process included the photo-irradiated graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA) and the ring-opening reaction of the grafted polyDMAEMA with 2-alkyloxy-2-oxide-1,3,2-dioxo-phospholanes (AOP). Four AOPs, whose alkyloxy groups consisted of dodecyl, tetradecyl,hexadecyl and octadecyl moieties, were used to convert the grafted polyDMAEMA to phospholipidpolymers. FT-IR spectra confirmed the chemical change of membrane surface. Platelets adhesion experiment indicated that PP membrane with excellent blood compatible surface could be fabricated by this method.     

Synthesis and characterization of Sibunit-supported Pd–Ga,Pd–Zn,and Pd–Ag catalysts for liquid-phase acetylene hydrogenation

Pd/Sibunit and Pd–M/Sibunit (M = Ga, Zn, or Ag) catalysts have been synthesized, and their catalytic properties in liquid-phase acetylene hydrogenation have been investigated. Doping of the palladium catalyst with a metal M leads to the formation of the Pd₂Ga, PdZn, or Pd_0.46Ag_0.54 bimetallic compound. The bimetallic particles are much smaller (1.6–2.0 nm) than the monometallic palladium particles (4.0 nm). Doping with zinc raises the ethylene selectivity by 25% without affecting the activity of the catalyst. Specific features of the effect of each of the dopants on palladium are reported.     

Sandwich-like Catalyst–Carbon–Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium–Sulfur Batteries

Herein, we propose the construction of a sandwich-structured host filled with continuous 2D catalysis–conduction interfaces. This MoN-C-MoN trilayer architecture causes the strong conformal adsorption of S/Li₂S_x and its high-efficiency conversion on the two-sided nitride polar surfaces, which are supplied with high-flux electron transfer from the buried carbon interlayer. The 3D self-assembly of these 2D sandwich structures further reinforces the interconnection of conductive and catalytic networks. The maximized exposure of adsorptive/catalytic planes endows the MoN-C@S electrode with excellent cycling stability and high rate performance even under high S loading and low host surface area. The high conductivity of this trilayer texture does not compromise the capacity retention after the S content is increased. Such a job-synergistic mode between catalytic and conductive functions guarantees the homogeneous deposition of S/Li₂S_x, and avoids thick and devitalized accumulation (electrode passivation) even after high-rate and long-term cycling.     

Emission Spectrometric Evaluation of a Hollow-Cathode Glow Discharge Plasma with Helium–Oxygen Mixed Gas for Surface Modification of Co–Cr–Mo Alloy

Plasma Chemistry and Plasma Processing - This paper represents emission spectrometric analysis of a hollow-cathode glow discharge plasma with helium–oxygen mixed gas for surface treatment of...     

Pd–Co alloy as an efficient recyclable catalyst for the reduction of hazardous 4-nitrophenol

Research on Chemical Intermediates - Palladium–Cobalt (Pd–Co) alloys with different atomic ratios were synthesized successfully by borohydride-assisted chemical reduction method....