Intradiffusion coefficients for perchlorate ions in zinc perchlorate and zinc chloride solutions at 25°C: Comparing transport properties of zinc chloride and zinc perchlorate systems

Intradiffusion coefficients for³⁶ClO ₄ ^– have been measured in solutions of zinc perchlorate of concentration 0.1 to 3 mol dm^–3 at 25°C by the diaphragm cell technique. In addition, intradiffusion coefficients for perchlorate ions in zinc chloride solutions have been measured over a concentration range at 25°C. The results confirm previous work on the effect of complexation on diffusion in zinc chloride solutions above a salt concentration of 0.1M. The present data, together with literature data for diffusion coefficients of the other species present in the zinc perchlorate electrolyte system, have enabled a simple analysis of the hydration around the zinc ions to be carried out. This indicates that the water diffusion data are consistent with the zinc ions having an effective hydration sphere of 11 (±2) water molecules. This is in keeping with values obtained for other simple divalent electrolytes using the same model. The model is extended here to allow analysis of water diffusion in zinc chloride solutions taking into account the presence of complexed chloro-zinc species. The experimental data are consistent with the effective hydration of the chloro-zinc complexes being independent of the number of chloride ligands and equal to 18±3 over a concentration range of 0 tol mol-dm^–3. This postulate is discussed in terms of its consequences on the water ligand dynamics for the complex equilibria.     

Optical nonlinearity of organic dyes as studied by Z-scan and transient grating techniques

The excited state absorption cross-section of 5,5′-dichloro-11-diphenyl-amino-3,3′-diethyl-10, 12-ethylinethiatricarbocyanine perchlorate (IR140) have been measured by using a single beam transmission technique. Z-scan experiments have been used to find out a few nonlinear parameters. The excited state relaxation times have also been measured by using laser induced transient grating (LITG) technique.     

Bathophenanthrolinedisulphonic acid and bathocuproinedisulphonic acid, water soluble reagents for iron and copper

Bathophenanthrolinedisulphonic acid and bathocuproinedisulphonic acid have been isolated in solid form as sodium salts and characterised. Both materials retain the high sensitivity of the parent materials as spectrophotometric reagents, for iron and copper respectively. They are water soluble and unlike the parent reagents may be used in aqueous perchlorate solutions. Interferences are about the same as with the parent reagents, but the pH range for maximum colour formation extends two pH units further into the alkaline region. Iron^II tribathophenanthrolinedi-sulphonic acid is an excellent oxidation-reduction indicator, changing sharply from red to green in the cerate titration of iron^II; it may be used in solutions containing perchloric acid.     

Challenges encountered in extending the sensitivity of US Environmental Protection Agency Method 314.0 for perchlorate in drinking water

Concerns about the potential adverse health effects of perchlorate at concentrations below the minimum reporting level (MRL) of US Environmental Protection Agency (EPA) Method 314.0 (generally recognized as 4.0 microg/l) have led to an interest in increasing the sensitivity of the method. This work describes the use of 2 mm columns with a large-loop direct injection method, a column concentration technique and this concentration technique with a background reduction step, to increase the sensitivity for the analysis of trace levels of perchlorate in high ionic strength matrices. The concentrator columns studied were the Dionex TAC LP-1 and a new Dionex high capacity Cryptand concentrator column. The use of a surrogate to monitor trapping efficiency for the concentration technique and the use of confirmational columns to minimize the potential for false positives are also discussed. The large-loop direct injection method and the column concentration methods provided acceptable data when the samples were pre-treated with solid phase pretreatment cartridges. The background reduction technique did not provide acceptable data with either of the concentrator columns evaluated.     

Vibrational Spectroscopic Study on Ion Solvation and Association of Lithium Perchlorate in 4-Methoxymethyl-ethylene Carbonate

Solvation interaction and ion association in solutions of lithium perchlorate/4-methoxymethyl-ethylene carbonate （MEC） have been studied by using Infrared and Raman spectra as a function of concentration of lithium perchlorate. The splitting of ring deformation band and ring ether asymmetric stretching band, and the change of carbonyl stretching band suggest that there should be a strong interaction between Li^＋ and the solvent molecules, and the site of solvation should be the oxygen atom of carbonyl group. The apparent solvation number of Li^＋ was calculated by using band fitting technique. The solvation number was decreased from 3.3 to 1.1 with increasing the concentration of LiClO4/MEC solutions. On the other hand, the band fitting for the ClO4^- band revealed the presence of contact ion pair, and free ClO4^- anion in the concentrated solutions.     

Détermination, à 25°C,du produit ionique des solvants mixtes acétone+eau+perchlorate de sodium

The ionic products of different mixed solvents acetone+water with sodium perchlorate have been determined by a method of standardisation using solutions of “strong” acids and bases.The evolution of pk_i is plotted in function of molar fraction of acetone and concentration of sodium perchlorate.The approximate values of the ionic product of acetone and acetone+sodium perchlorate media (0.5 M, 1 M, 2 M, 3 M) have been achieved easily by graphical extrapolation.     

Ultrasonic and viscometric investigation of ISRO polyol in various solvents and its compatibility with polypropylene glycol

Ultrasonic velocity, density and absolute viscosities have been measured for solutions of ISRO polyol, a prominent castor oil based solid propellant binder used in the Indian Space Research Organization. The solvation of ISRO polyol has been studied in various solvents. The solvation number is found to be higher in highly hydrogen-bonded solvents. The theoretical and experimental values of the Rao constant of ISRO polyol solution are also found to be identical within experimental error. The compatibility of ISRO polyol with polypropylene glycol, another solid propellant binder, has also been studied by the ultrasonic technique.     

Comparative analysis of structural parameters of the nearest surrounding of nitrate and perchlorate ions in aqueous solutions of electrolytes

Data on structural parameters of the nearest surrounding of nitrate and perchlorate ions in aqueous solutions under standard conditions have been generalized. Hydration numbers, interparticle distances, and ionic association types have been discussed and compared. The major difference between the ions is that nitrate ion tends to form ion pairs, whereas perchlorate ion does not.     

分光光度法测定水溶液中的有机酸含量

利用水溶液中的有机酸在高氯酸羟胺(HAP)和N,N′-二环己基碳酰亚胺(DCC)存在的条件下生成的羟肟酸,以及羟肟酸在酸性高氯酸铁溶液中显色的性质,建立了一种分光光度测定水中有机酸含量的方法。对显色剂的酸度、浓度、加入体积、HAP和DCC的浓度、加入体积以及显色反应的温度、反应时间对吸光度的影响进行了考察。结果表明,该显色反应在反应条件:0.0687mol/LHAP1.0mL、0.6mol/LDCC0.5mL、震荡均匀后室温下放置反应15min、0.02mol/L酸性高氯酸铁溶液(高氯酸浓度0.3mol/L)显色条件下具有最大的吸光度;并对正丁酸、正戊酸、苯甲酸进行了线性关系考察。结果表明,该检测方法具有仪器简单、操作方便、线性范围较宽、准确度高等优点,可用于那些不易从水溶液中萃取的有机酸的测定,也可用于液相色谱洗脱液中有机酸的测定。     

Thermogravimetric analysis of cobalt sulfate

Morpholine is a base of moderate strength, comparable with that of ammonia, and capable of forming -onium-type salts. Extensive studies [1,2] have been made on the thermal stability of ammonium perchlorate because of its technological use as an oxidant in solid state rocket propellants. The preparation, characterization and thermal behaviour of morpholinium perchlorate are reported in this note. The study was followed by XRD, IR, TG, DTA and mass spectral techniques.     

Synergistic solvent extraction of lutetium(III). Computer aided analysis

Synergism in the extraction of Lu(III) from thiocyanate solutions has been investigated using mixtures of bis-2-ethylhexyl sulfoxide (B2EHSO) and 2-thenoyltrifluoroacetone (HTTA) or di-n-octyl sulfoxide (DOSO) or tri-n-octylphosphine oxide (TOPO) in benzene. For comparison, the synergistic extraction of Lu(III) from perchlorate solutions has also been investigated with a mixture of B2EHSO and HTTA. These extraction data have been analyzed theoretically with the aid of a computer by taking into account complexation of the metal in the aqueous phase by inorganic ligands and plausible complexation in the organic phase. The equilibrium constants of the various product species have been deduced by non-linear regression analysis.     

Partial molal volumes for iron(II)-diimine complexes in water and in aqueous methanol

Summary Partial molal volumes of the perchlorate or chloride salts of several tris-diimine-iron(II) cations have been determined in aqueous and methanol-water solutions by vibrating-tube densimetry. Partial molal volumes of the cations at infinite dilution have been estimated for aqueous solution, and compared with values for related cations. Trends of limiting partial molal volumes for perchlorate salts in methanol-water media are compared with trends in transfer chemical potentials for the respective cations; both are discussed in terms of ligand-dependent preferential solvation behaviour.     

Solvation of the bismuth(III) ion by water, dimethyl sulfoxide, N,N'-dimethylpropyleneurea, and N,N-dimethylthioformamide. An EXAFS, large-angle X-ray scattering, and crystallographic structural study

The structure of the solvated bismuth(III) ion in aqueous, dimethyl sulfoxide, N,N'-dimethylpropyleneurea, and N,N-dimethylthioformamide solution has been studied by means of EXAFS and large-angle X-ray scattering (LAXS). The crystal structures of the solid compounds octakis(dimethyl sulfoxide)bismuth(III) perchlorate, [Bi(OS(CH3)2)8](ClO4)3, hexakis(N,N'-dimethylpropyleneurea)bismuth(III) perchlorate, [Bi(OCN2(CH2)3(CH3)2)6](ClO4)3, and nonaaquabismuth(III) trifluoromethanesulfonate, [Bi(H2O)9](CF3SO3)3 (redetermination), have been determined. The aqueous solutions must be strongly acidic, since the hydrated bismuth(III) ion starts to hydrolyze into Bi6O4(OH)4(6+) complexes already at an excess of strong acid at 1.0 mol.dm-3. For very acidic aqueous perchlorate solutions, the LAXS and EXAFS data gave a satisfactory fit for eight-coordination of the bismuth(III) ion, with a mean Bi-O bond distance of 2.41(1) A. The crystal structure of octakis(dimethyl sulfoxide)bismuth(III) perchlorate shows that the bismuth(III) ion coordinates eight dimethyl sulfoxide molecules via the oxygen atoms in a distorted square antiprismatic configuration. The mean Bi-O bond distance is 2.43 A and the mean Bi...S distance 3.56 A. For the dimethyl sulfoxide solution, the corresponding mean distances were found to be 2.411(6) and 3.535(12) A. The N,N'-dimethylpropyleneurea-solvated bismuth(III) ion is octahedrally coordinated in both solid state and solution with the Bi-O bond distances of 2.324(5) and 2.322(3) A, respectively. The bismuth(III) ion is six-coordinated in the sulfur donor solvent N,N-dimethylthioformamide with a mean Bi-S bond distance of 2.794(8) A. A comparison with the structure of the solvated lanthanum(III) ion shows that the bismuth(III) ion is smaller for all coordination numbers. New effective ionic radii for the bismuth(III) ion in different coordination numbers are proposed, based on results in this study and in the literature.     

Corrosion behavior of dimensionally stable anodes in chlorine electrolyses

The rate of anodic dissolution of ruthenium from the active coating of dimensionally stable anodes is studied as a function of time by a radiotrace technique in chloride and perchlorate solutions. In chloride solutions, the rate decreases by approximately four orders of magnitude and for a long (hundreds of hours) time. In the perchlorate solution, the dissolution rate changes only by hundredfold, for 25 min. These data confirmed the earlier conclusion that adsorbed chlorine inhibits anodic dissolution of the noble metal. The pH influence on the anode’s steady-state corrosion rate is studied. The corrosion rate sharply increases of pH increasing from 2 to 4 then slowly decreases to the values characteristic of the process rates in solutions of pH 2.     

Optimization of operating conditions for the determination of perchlorate in biological samples using preconcentration/preelution ion chromatography

Perchlorate originates as a contaminant in the environment from the use of salts in the manufacture of solid rocket fuels and munitions. Monitoring potential perchlorate contamination in the environment is of interest, however, very few analytical methods have been developed for perchlorate determination in biological samples. Analysis of complex samples by ion chromatography is complicated by matrix components that can interfere with perchlorate determination. However, a recently developed preconcentration/preelution (PC/PE) ion chromatography method has demonstrated the capability to analyze certain complex samples such as high salinity water, milk, and hydroponic fertilizers. The ability of this method to reduce sample background and lower detection limits in ion chromatography for various biological samples was evaluated in this study. The PC/PE method was applicable to the analysis of kidneys, livers, zebrafish, quail eggs, lettuce, and urine. Optimal operating conditions were determined for each matrix. Ranges of optimal wash volumes were shorter when 15 mM NaOH prewash solutions were used compared with 10mM and good recovery was achieved for most matrices with an injection period > or =60s. Prewash solution concentration did not appear to significantly affect matrix background. The PC/PE method was capable of reducing sample background when compared to EPA Method 314.0, which resulted in detection limits, with the exception of zebrafish and urine, that were two-fold lower than those achieved with EPA Method 314.0.     

Ion solvation and association in LiClO4/sulfolane solution: a vibrational spectroscopic and molecular orbital study

Solvation interaction and ion association in solutions of lithium perchlorate/sulfolane have been studied by using infrared and Raman spectra as a function of concentration of lithium perchlorate. The band changes of antisymmetric OSO stretch, antisymmetric CSC stretch, -SO2 wag and twist suggest that there is an interaction between Li+ and sulfolane molecules, and the site of solvation is the oxygen atom of -SO2 group. The molecular orbital calculation supports this suggestion. On the other hand, the apparent solvation number was calculated, and the band fitting for the ClO4- band reveals the presence of contact ion pair, solvent separated ion pair and free ClO4- anion in the concentrated solutions.     

A new reaction for the identification and determination of perchlorate : Part I. Detection of perchlorate

Perchlorate is extracted into methyl isobutyl ketone from aqueous solutions of copper(II) ions containing azide ions and an excess of 2,2'-dipyridyl. The yellow color of the organic phase can be used for the detection of perchlorate. A procedure is given which allows the identification of 3 μg of perchlorate. Considerably larger amounts of nitrate, chlorate, chloride and several other anions can be tolerated. By performing the test with the help of the Weisz ring oven technique, a limit of identification of 0.15 μg of perchlorate can be attained.     

Excess enthalpy and entropy of aqueous tetramethylguanidinium perchlorate and chloride and tetramethylammonium nitrate

Heats of dilution have been measured for aqueous solutions of tetramethylguanidinium perchlorate and chloride and for tetramethylammonium nitrate at 25°C. Excess enthalpies have been calculated and combined with excess free energy data which were previously published to yield excess entropy. These results furnish further evidence for the association of the tetramethylguanidinium salts in aqueous solutions.     

Coordination chemistry of mercury(II) in liquid and aqueous ammonia solution and the crystal structure of tetraamminemercury(II) perchlorate

The ammonia solvated mercury(II) ion has been structurally characterized in solution by means of EXAFS, (199)Hg NMR, and Raman spectroscopy and in solid solvates by combining results from X-ray single crystal and powder diffraction, thermogravimetry, differential scanning calorimetry, EXAFS, and Raman spectroscopy. Crystalline tetraamminemercury(II) perchlorate, [Hg(NH3)4](ClO4)2, precipitates from both liquid ammonia and aqueous ammonia solution, containing tetraamminemercury(II) complexes. The orthorhombic space group ( Pnma) imposes C s symmetry on the tetraamminemercury(II) complexes, which is lost at a phase transition at about 220 K. The Hg-N bond distances are 2.175(14), 2.255(16), and 2 x 2.277(9) A, with a wide N-Hg-N angle between the two shortest Hg-N bonds, 122.1(7) degrees , at ambient temperature. A similar distorted tetrahedral coordination geometry is maintained in liquid ammonia and aqueous ammonia solutions with the mean Hg-N bond distances 2.225(12) and 2.226(6) A, respectively. When heated to 400 K the solid tetraamminemercury(II) perchlorate decomposes to diamminemercury(II) perchlorate, [Hg(NH3)2](ClO4)2, with the mean Hg-N bond distance 2.055(6) A in a linear N-Hg-N unit. The mercury atoms in the latter compound form a tetrahedral network, connected by perchlorate oxygen atoms, with the closest Hg...Hg distance being 3.420(3) A. The preferential solvation and coordination changes of the mercury(II) ion in aqueous ammonia, by varying the total NH 3:Hg(II) mole ratio from 0 to 130, were followed by (199)Hg NMR. Solid [Hg(NH 3)4](ClO4)2 precipitates while [Hg(H2O)6](2+) ions remain in solution at mole ratios below 3-4, while at high mole ratios, [Hg(NH3)4](2+) complexes dominate in solution. The principal bands in the vibrational spectrum of the [Hg(NH3)4](2+) complex have been assigned.     

Rapid detection of perchlorate in groundwater using capillary electrophoresis

Summary Perchlorate is a groundwater contaminant originating from facilities that manufacture and test solid rocket fuel. A new technology, capillary electrophoresis, has the potential to measure perchlorate rapidly and inexpensively in water samples. With its speed and simplicity, this method would complement existing methods. The perchlorate anion is routinely detected in water samples using high performance ion exchange chromatography, a very sensitive yet time consuming and expensive method. In this work, the parameters for detection of perchlorate are optimized to permit detection of 0.400 mgL⁻¹ perchlorate in a standard solution. The usefulness of this technology is demonstrated for measuring perchlorate in several ground-water samples from the Western United States. The results demonstrate that CE can be used to rapidly screen environmental samples for perchlorate at intermediate to high levels (greater than 0.400 mgL⁻¹). This technique allows faster, easier screening of potential contamination sites and could complement the use of ion exchange chromatography for groundwater testing.