Cuprous Iodide Catalyzed Synthesis of Diaryl Selenide and Telluride from Organoboronic Acids with Diphenyl Diselenide and Ditelluride

Organoselenium and tellurium compounds have received much attention not only as synthetic reagents or intermediates in organic synthesis but also as promising donor molecules for conductive materials.[1] A number of synthetic methods have been reported to prepare organoselenium and tellurium derivatives. A convenient and general method to introduce a selenium or tellurium moiety into organic molecules is the reaction of a metal selenolate or tellurolate with appropriate electrophiles such as organic halides, acyl chlorides, epoxides, and α, β-enones.[2] However, it is difficult to synthesize the unsymmetrical diarylselenides and tellurides through the reaction of selenide anion with organic halides because of the less reactivity of aryl halides. To accomplish this purpose, the reaction (iodobenzene with phenylselenol)was generally carried out in the presence of catalysts, ligands and strong bases. But, the reaction needs longer time to accomplish and form the products in moderate yields.     

Influence of temperature on metal-organic frameworks

Reaction temperature is one of the key parameters in the synthesis of metal-organic frameworks （MOFs）. Though there is no convergence with regard to the various experimental parameters, reaction temperature has been found to have remarkable influence on the formation and structure of MOFs, especially toward the control of topology and dimensionality of the MOF structures. Theoretically, the reaction temperature affects directly the reaction energy barrier in reaction thermodynamics and the reaction rate in the reaction kinetics. This review aims to show the influence of reaction temperature on crystal growth/assembly, structural modulation and transformation of MOFs, and to provide primary information and insights into the design and assernblv of desired MOFs.     

A Novel, Simple and Efficient Synthesis of Ferrocenyl Enones and Alkynols

Propargylic alcohols are versatile precursors to many organic molecules including natural products and pharmaceutical compounds.[1] In our continuing interest in the development of practical methods for synthesis of ferrocene derivatives, we decided to investigate the efficiencies of ferrocenylacetylene addition to aromatic aldehydes under t-BuOKcatalyzed condition.[2] Interestingly, we found that the usually reliable coupling reaction between terminal alkyne of type 1 and aromatic aldehydes of type 2 does not furnish the expected propargylic alcohols, but that the isomeric aryl enones 3are found in high yield and very short reaction time (10～20 min). This provided a promising protocol for preparation of ferrocenyl chalcones in a practical, economical and mild sense compared with the traditional method. To the best of our knowledge, this unusual reaction was first observed for the addition of ferrocenylacetylene to aldehyde in a base-catalyzed manner (Eq. 1).     

Chemical Reactions and Kinetics of the Carbon Monoxide Coupling in the Presence of Hydrogen

The chemical reactions and kinetics of the catalytic coupling reaction of carbon monoxide to diethyl oxalate were studied in the presence of hydrogen over a supported palladium catalyst in the gaseous phase at the typical coupling reaction conditions. The experiments were performed in a continuous flow fixed-bed reactor. The results indicated that hydrogen only reacts with ethyl nitrite to form ethanol, and kinetic studies revealed that the rate-determining step is the surface reaction of adsorbed hydrogen and the ethoxy radical (EtO-). A kinetic model is proposed and a comparison of the observed and calculated conversions showed that the rate expressions are of rather high confidence.     

Direct partial oxidation of methane to methanol： Reaction zones and role of catalyst location

Direct partial oxidation of methane to methanol was investigated in a specially designed reactor. Methanol yield of about 7%-8% was obtained in gas phase partial oxidation. It was proposed that the reactor could be divided into three reaction zones, namely pre-reaction zone, fierce reaction zone, and post-reaction zone, when the temperature was high enough to initiate a reaction. The oxidation of methane proceeded and was completed mostly in the fierce reaction zone. When the reactant mixture entered the post-reaction zone, only a small amount of produced methanol would bring about secondary reactions, because molecular oxygen had been exhausted in the fierce reaction zone. A catalyst, if necessary, should be placed either in the pre-reaction zone, to initiate a partial oxidation reaction at a lower temperature, or in the fierce reaction zone to control the homogeneous free radical reaction.     

Enzymatic Promiscuity： Escherichia coli BioH Esterase-catalysed Aldol Reaction and Knoevenagel Reaction

Esterase BioH,which is obligatory for biotin synthesis in Escherichia coli,was found to exhibit a promiscuous ability to catalyse Aldol and Knoevenagel reactions with moderate to good yields.The reaction conditions including organic solvent,molar ratio of ketone to aldehyde,enzyme amount,and reaction time were investigated to evaluate the effect of different reaction conditions on yield.Target compounds were afforded in the best yield of 91.2％ for Aldol reaction and 54.7％ for Knoevenagel reaction.In addition,because the enzyme could be prepared with a low cost,this protocol could provide an economic route to conduct Aldol and Knoevenagel reactions,which expand the field of enzymatic promiscuity.     

Photochemical naphthylation at(α-carbon atom of carbonyl and its equivalences

The photostimulated reaction of halonaphthalene with a series of carbanions derived from,propionic acid derivatives in liquid ammonia led to the naphthylation at a-carbon of the carbanions inan isolated yield ranging from 25％ to 86％.In all cases,the dehalonaphthalenes were found to,be by-products and the reaction was inhibited by p-dinitrobenzere.An electron transfer from thecarbanion to the halonaphthalene followed by ejection of halogen led to naphtbyl radical,as predictedby comparing the LUMOs of the carbanions and the halonaphthalenes,was involved in the process.Absence of the alkylnaphthalene and 1,2-dinaphthylalkane in the products indicates the smoothelectron transfer between(Naph-Nu)~+ and Naph-X.C-vs.O-naphthylation is fully addressed interms of MNDO calculations and acid-base principle.     

Catalytic Systems Containing p-Toluenesulfonic Acid for the Coupling Reaction of Formaldehyde and Methyl Formate

The coupling reaction of formaldehyde(FA)and methyl formate(MF)to form methyl glycolate(MG)and methyl methoxy acetate(MMAc),catalyzed by p-toluenesulfonic acid(p-TsOH)as well as assisted by different kinds of solvents or Ni-containing compounds,had been investigated.The results showed that when the reaction was carried out at 140℃,with a molar ratio of FA to MF of 0.65:1, molar fraction of p-TsOH to total feedstock of 11.0%,and reaction time of 3 h,the yield of MG and MMAc was 31.1% and 17.1%,respectively,p-TsOH catalyzed the coupling reaction by means of the synergistic catalysis of protonic acidity and soft basicity.Adding extra solvents to the reaction system was unfavorable for the reaction.The composite catalytic system consisting of p-TsOH and NiX_2(X=Cl,Br,I)exhibited a high catalytic performance for the coupling reaction,and NiX_2 acted as a promoter in the reaction,whose promotion for the catalysis increased in the following order:NiCl_2相似文献   

Study on the alkylation reaction of guanine and N-acetylguanine and the synthesis of 1''''-C alkylated carba-DHPG analogues

The alkylation reaction of guanine and N-acetylguanine with model compounds such as isopropyl bromide or 4-heptyl tosylate were studied. The reaction conditions such as temperature, solvent, base, and catalyst were examined for their effects on the reaction rate, and the yield and regioselectivity of the coupling reaction. The highest yield was obtained by using DMSO as the solvent. The reaction proceeded in a homogenous manner to give higher yield of 9-N and 7-N substituted product in a mole ratio of 1:1. The ratio could be raised to 2:1 if dibenzo-18-crown-6 was used as a catalyst. Using the above procedure, three carba-DHPG analogues bearing different 1'-C alkyl side chains were synthesized.     

Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbcn Dioxide

Promotion of ionic liquid, 1-ethyl-3-methylimidazolium bromide (emimBr), to the synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide in the presence of potassium carbonate and less amount of methyl iodide under mild conditions was investigated. The results showed that the high selectivity and raised yield of DMC was achieved due to the addition of emimBr in the reaction system. And effect of several reaction conditions such as temperature, pressure and amount of emimBr was discussed.     

SnCl2／Cu-Mediated Carbonyl Allylation Reaction in Water： Scope, Selectivity and Mechanism

Copper was found to be able to promote the SnC12-mediated carbonyl allylation reactions in water, giving the corresponding homoallylic alcohol products in very high yields. Detailed studies showed that the reaction could be applied to a variety of carbonyl compounds including those with hydroxyl, amino and nitro groups. It was also found that this reaction showed good regioselectivities for some substrates. Furthermore, carefully controled experiments and in situ NMR measurements provided important insights into the mechanism of the newly developed reaction.     

DFT Study on the Origin of the Enantioselectivity of （S）-4-Hydroxylproline-Catalyzed Direct Aldol Reaction between Acetone and 4-Nitrobenzaldehyde

DFT-B3LYP calculations were carried out to study the enantioselectivity of the （S）-4-hydroxylproline-catalyzed direct aldol reaction between acetone and 4-nitrobenzaldehyde. Four transition structures associated with the stereo-controlling step of the reaction have been determined. They are corresponding to the anti and syn arrangements of the methylene moiety related to the carboxylic acid group in enamine intermediate and the si and re attacks to the aldehyde carbonyl carbon. The effect of DMSO solvent on the stereo-controlling step was investigated with polarized continuum model （PCM）. The computed energies of the transition states reveal the moderate enantioselectivity of the reaction.     

Synthetic studies towards(-)-deserpidine:Total synthesis of the stereoisomer and derivative of (-)-deserpidine

The asymmetric synthesis of 16,17,20-epi-deserpidine and a derivative of(-)-deserpidine has been achieved.Key feature s in the assembly of the pentacyclic framework include a visible-light photocatalytic intra-/inter-/intramolecular radical cascade reaction to construct the tetracyclic ABCD ring system in one-pot and an intramolecularaldol reaction to forge the cyclohexane E ring.     

Theoretical and Experimental Studies on the Reaction Mechanism of Cl2 ＋ I2- 2ICl

1 INTRODUCTION The reactions between halogen and halogen are basic reactions in chemistry. Especially, in the syn- thesis of iodo-substituted aromatic hydrocarbon, the reaction Cl2 I2 = 2ICl could heighten the usage of iodine atom to 100%. So far, to the best of our know- ledge, the studies about halogen-halogen reaction mechanisms are very few. In detail, only the struc- ture and stability studies of X2Y- (X, Y = Cl, Br and I) ions by calculating reaction potential energy sur- face…     

Iridium oxide fabrication and application: A review

Despite the scarcity and cost of iridium oxide,it is still the material of choice in numerous fields of science and applications,including capacitors,electrochromism,sensors,and various oxidation electrocatalysis(e.g.,chlorine evolution reaction,detoxification,and oxygen evolution reaction).Such versatility is attributed to the distinct features of iridium oxides,such as their activity,biocompatibility,conductivity,and durability.The features and properties of iridium oxides are strongly dependent on the fabrication method.In this review,methodologies relating to the synthesis and fabrication of solid-state iridium oxides have been thoroughly collected and discussed.Structuring and crystallization techniques for iridium oxides are also noted.At the end of the review,the effects of utilizing a certain fabrication method on the characteristics of the iridium oxide product are recapitulated,together with the recommended application of the product in various fields.     

Reaction of Perfluoroalkanesulfinyl Chlorides with Enamines: A Facile Synthesis of α-Perfluoroalkanesulfinyl Ketones and Aldehydes

The reaction of perfluoroalkanesulfinyl chlorides with enamines was achieved in the presence of triethylamine, and α-perfluoroalkanesulfinyl carbonyl compounds were obtained in moderate to good yields after hydrolysis of the reaction intermediates with dilute hydrochloric acid.     

Ab Initio Study on the Isomerization and Dehydrogenation of Methylnitrene

The ab initio calculations were performed at the RHF/4-31G level with the reaction pathways of the iso-merization and dehydrogenation of methylnitrene by the intrinsic reaction coordinate method. The results show that the transformation from methylnitrene to methylenimine would be very easy. This accountes for the experimental fact that one couldn' t find the methylnitrene, but only obtained the methylenimine in the pyrolysis of methyl azide. The mode-selective study reveals the reaction coordinates (IRC) of isomerization and dehydrogenation of methylnitrene are associated with the molecular deformation mode of 1191 cm-1 and the methyl group unsymmetrical stretch mode, respectively. The coupling between normal coordinates is favourable to select the reaction channel of isomerization.     

The reaction of perfluoroalkanesulfonyl halides Ⅶ. Preparation and reactions of trifluoromethanesulfonyl bromide

The reaction between sodium trifluoromethanesulfinate, which was prepared from trifluorome-thyl bromide, with bromine in aqueous solution resulted in the formation of trifluoromethanesulfonylbromide (CF_3SO_2Br). CF_3SO_2Br reacted with alkenes and alkyne to give the corresponding adductswith the loss of SO_2 in good yields, and with compounds containing active hydrogen to give brominatedderivatives. A radical reaction mechanism was proposed and confirmed by EPR study.     

Chemical preparation and investigation of Fe-P-B ultrafine amorphous alloy particles

A series of Fe-P-B ultrafine amorphous alloy particles has been prepared by the chemical reduction method The composition and size of the particles have been effectively adjusted.Mossbauer spectroscopy in addition to sonic other techniques has been used to investigate the reaction process,the factors that influence the preparation,the crystallization of the particles,and the interactions between the components within them.The results indicate that the co-deposition of iron,phosphorus and boron atoms in the solution at room temperature forms Fe-P-B amorphous alloy particles,and a preferential bonding of Fe-P bond to Fe-B one exists in the particles.     

P-Dodecylbenzenesulfonic acid(DBSA),a Brфnsted acid-surfactant catalyst for Biginelli reaction in water and under solvent free conditions

We report herein the use of p-dodecylbenzenesulfonic acid(DBSA) as a catalyst for a one-pot Biginelli reaction to afford 3,4- dihydropyrimidinone derivatives in good to excellent yields.This reaction proceeds efficiently in water and under solvent free conditions.Comparisons of results indicate that although the yields are high and comparable for both methods,the reaction times are considerably shorter under solvent free conditions.