Analysis of metacycline by capillary electrophoresis

The development and validation of an optimized capillary electrophoresis method for the determination of metacycline in the presence of its related substances by capillary electrophoresis is shown. The influence of methanol as organic modifier, buffer pH, buffer concentration, capillary length, column temperature, Triton X-100 and methyl-beta-cyclodextrin was investigated. A central composite design was performed in order to optimize the method. The optimal separation conditions were: uncoated fused-silica capillary (39 cm total length, 31 cm effective length, 50 microm ID); as background electrolyte a solution of 160 mM sodium carbonate and 1 mM EDTA (pH 10.35)/methanol (89:13 v/v); temperature, 15 degrees C; voltage, 12 kV. The method showed good selectivity, repeatability, linearity, and sensitivity. The limits of detection and quantitation are 0.024% and 0.06%, respectively, relative to a 2.5 mg/mL solution. Six commercial samples were analyzed quantitatively.     

Purity control of oxytetracycline by capillary electrophoresis

The applicability of capillary electrophoresis for the purity control of oxytetracycline (OTC) was investigated. OTC is a broad-spectrum antibiotic belonging to the group of the tetracyclines. Several related substances can be present due to fermentation or degradation, such as 4-epioxytetracycline, -apooxytetracycline, β-apooxytetracycline, anhydrooxytet racycline, 2-acetyl-2-decarboxamidooxytetracycline, tetracycline and 4-epitetracycline. Using fused-silica capillaries, the influence of buffer type, buffer pH and buffer concentration were investigated. In all cases 1 mM EDTA was added to prevent metal-ion complexation. The influence of the buffer counter-ion type was examined. Consequently, some instrumental parameters were changed such as capillary length and diameter as well as capillary temperature and applied voltage. The following method is finally proposed: fused-silica capillary, l (effective length) = 38 cm, L (total length) = 44 cm, 50 μm I.D.; buffer, sodium carbonate 20 mM-EDTA 1 mM, pH 11.25; voltage, 10 kV; temperature, 10°C. Linearity, limit of detection and limit of quantitation were determined as well as the relative standard deviations for all the analytes involved. This method is less selective then existing liquid chromatographic methods but it may be used as a complementary tool in purity control and stability studies.     

Analysis of polymyxin B sulfate by capillary zone electrophoresis with cyclodextrin as additive. Method development and validation

A capillary zone electrophoresis method for analysis of polymyxin B sulfate is described. In this method, triethanolamine (TEA)-phosphate buffer at pH 2.5 was employed to reduce the adsorption of analyte onto the capillary wall. Methyl-beta-cyclodextrin (M-beta-CD) and 2-propanol (IPA) were found to be necessary for selectivity enhancement. In order to optimize the method and to control its robustness, a central composite design was performed with four parameters, i.e. concentration of M-beta-CD, TEA, IPA and buffer pH. The optimal separation conditions were as follows: capillary, 55 cm (50 microm I.D., 47 cm effective length); 130 mM TEA-phosphate buffer (pH 2.5) containing 5 mM M-beta-CD and 5% IPA; 24 kV (51 microA) applied voltage; column temperature, 20 degrees C. Further, linearity and limits of detection quantification were examined. Three commercial samples were analyzed quantitatively.     

Determination of EDTA in used fixing solutions by capillary electrophoresis

A capillary electrophoretic method for the determination of EDTA has been developed. EDTA was converted to Ni(II)-EDTA prior to separation, separated from Fe(III)-EDTA, thiosulphate, bromide and polythionates using a fused silica capillary (57 cm × 75 μm I.D.) filled with a borate buffer (50 mmol L^–1; pH 8.5; applied voltage, 30 kV) and detected at 214 nm. The separation time is about 6 min. The detection limit achieved is 2 × 10^–6 mol L^–1 for EDTA. This method was applied for the determination of free EDTA in used fixing solutions. Received: 27 February 1998 / Revised: 28 April 1998 / Accepted: 20 May 1998     

Determination of EDTA in used fixing solutions by capillary electrophoresis

A capillary electrophoretic method for the determination of EDTA has been developed. EDTA was converted to Ni(II)-EDTA prior to separation, separated from Fe(III)-EDTA, thiosulphate, bromide and polythionates using a fused silica capillary (57 cm × 75 μm I.D.) filled with a borate buffer (50 mmol L^–1; pH 8.5; applied voltage, 30 kV) and detected at 214 nm. The separation time is about 6 min. The detection limit achieved is 2 × 10^–6 mol L^–1 for EDTA. This method was applied for the determination of free EDTA in used fixing solutions. Received: 27 February 1998 / Revised: 28 April 1998 / Accepted: 20 May 1998     

Analysis of colistin sulfate by capillary zone electrophoresis with cyclodextrins as additive

A method for the quantitative analysis of colistin sulfate by capillary zone electrophoresis is described. Since colistin components have five free amino groups, they tend to adsorb onto the capillary wall and cause peak tailing. It was found that triethanolamine (TEA)-phosphate buffer at pH 2.5 was useful to reduce such adsorption. Methyl-beta-cyclodextrin (M-beta-CD) and 2-propanol (IPA) were found necessary for selectivity enhancement. In order to optimize the separation parameters and predict the method robustness, a central composite design was performed including three variables, namely concentration of M-beta-CD, TEA, and IPA. The effects of capillary length and applied voltage on separation were also investigated. The optimal conditions established were: 140 mM TEA-phosphate buffer containing 5 mM M-beta-CD and 6% v/v IPA, a capillary with 55 cm total length (50 microm inner diameter, 47 cm from inlet to detection window) and 24 kV applied voltage. The method was found to be robust when the variables were changed in the following range: 4-6 mM M-beta-CD, 5-7% v/v IPA, and 130-150 mM TEA. Further, the linearity, limit of detection (LOD), and limit of quantitation (LOQ), as well as repeatability for both colistin A and B were examined and three commercial samples were quantitatively analyzed.     

Screening of drug metabolism by CE

The use of CE for rapid assessment of metabolic stability of drugs with cytochrome P450 (CYP) enzymes, based on relative rates of reduced nicotinamide adenine dinucleotide phosphate (NADPH) consumption and nicotinamide adenine dinucleotide phosphate (NADP) production, was investigated. The separation conditions were as follows: capillary, 80.5 cm (75 microm id, 72 cm effective length for UV detection, 58 cm effective length for fluorescence detection); 25 mM sodium phosphate buffer (pH 8.8); 28 kV (80 microA) applied voltage; UV, 260 nm; fluorescence detection, excitation wavelength, 310 nm, emission wavelength, 418 nm; capillary temperature, 25 degrees C. For UV detection, the incubation conditions were as follows: CYP3A4: 20 pmol/mL; NADPH: 1 mM; EDTA: 1 mM; concentration of the substrate: 5-10 times its reported literature K(m) value; temperature: 37 degrees C; incubation time: 15 min. For fluorescence detection, the concentrations were reduced to CYP3A4: 4 pmol/mL, NADPH: 20 microM, EDTA: 20 microM and substrate: 10 microM. Blank incubations were performed in the absence of substrate. Compared with the blank, significant differences were found for the consumption of NADPH and the production of NADP. The development of this assay system allows rapid assessment of metabolic stability relative to standard compounds, as well as potential identification of the major CYP involved in the metabolism. It would reduce the backlog of compounds that require LC/MS analysis, and thereby expedite the process of metabolic stability screening.     

Analysis of vancomycin and related impurities by micellar electrokinetic capillary chromatography. Method development and validation

A fast and highly selective micellar electrokinetic capillary chromatography (MEKC) method for quantitative analysis of vancomycin and related impurities is described. Among the tested surfactants, cetyltrimethylammonium chloride (CTAC) offered the best selectivity. Another important parameter, which strongly influenced the selectivity, was buffer pH. It was found that the selectivity increased with buffer pH decreasing from 9 to 5. Using Tris-phosphate buffer containing CTAC, satisfactory separation could be obtained in the pH range from 5.0 to 5.5. Excellent repeatability in terms of migration time and peak area could be obtained when the capillary was carefully washed between two runs. In order to obtain optimal conditions and to evaluate the method robustness, a central composite experimental design was carried out. The optimal conditions were: 44 cm length of fused-silica capillary with 50 microm ID, 120 mM Tris-phosphate buffer (pH 5.2) containing 50 mM CTAC, -15 kV applied voltage, UV detection at 210 nm, and a column temperature of 25 degrees C. Under the optimal conditions, more than 20 peaks could be separated within 8 min. The method has a linearity range from 0.004 to 1.2 mg/ml (concentration of vancomycin B, active component). The limit of detection (LOD) and limit of quantitation (LOQ) were 0.4 microg/mL vancomycin, equivalent to 0.3 microg/mL vancomycin B (0.04%) and 1.1 microg/mL vancomycin, equivalent to 0.9 microg/mL vancomycin B (0.1%), respectively.     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Analysis of metformin dosage formulations by capillary electrophoresis at nano scale detection

An inexpensive, rapid and reproducible capillary electrophoretic method has been developed and validated for the determination of metformin in pharmaceutical preparations. The method was developed utilizing a fused silica capillary (60 cm x 50 microm I.D.), phosphate buffer (50 mM, 3.0 pH)-acetonitrile (95:5, v/v) as background electrolyte (BGE), 20 kV applied voltage with UV detection at 254 nm and at a working temperature of 23 +/- 1 degrees C. Linearity was observed in the concentration range from 100 ng/L to 5 microg/L, with a correlation coefficient (R2) of 0.9998. The limits of detection and quantification achieved were 60 and 100 ng/mL, respectively. The recovery of metformin from pharmaceutical preparations was 99.1%. These validation parameters demonstrate the precision of the method and its suitability for the determination of metformin in pharmaceutical tablet formulations.     

Development of a capillary electrophoresis method for the enantioselective estimation of primaquine in pharmaceutical formulations

A capillary electrophoresis (CE) method has been developed that allows the separation and estimation of primaquine enantiomers using hydroxypropyl-gamma-cyclodextrin (HP-gamma -CD) as a chiral selector. The influence of chemical and instrumental parameters on the separation, such as type and concentration of CD, buffer concentration, buffer pH, applied voltage, capillary temperature, and injection time, were investigated. Good separation of the racemic mixture of primaquine was achieved using a fused-silica capillary (52.5 cm effective length x 50 microm id) and a background electrolyte composed of tris-phosphate buffer solution (50 mM, pH 2.5) containing 15 mM HP-gamma-CD as a chiral selector. The recommended applied voltage, capillary temperature, and injection time were 15 kV, 25 degrees C, and 6 s, respectively. Within-day and interday reproducibility of peak area and migration time gave relative standard deviation values ranging from 1.05-3.30%. Good recoveries (range of 96.8-104.9%) were obtained from the determination of placebos that were spiked with 0.25-1.00 mg/L primaquine. The proposed CE method was successfully applied to the assay of primaquine diphosphate in pharmaceutical formulations (tablets).     

Determination of Rosuvastatin in Pharmaceutical Formulations by Capillary Zone Electrophoresis

A capillary zone electrophoretic method with diode array detection was developed and validated for the determination of rosuvastatin calcium in pharmaceutical formulations. Using fused-silica capillary (i.d. 50.0 μm, total length 48.5 cm and effective length 40.0 cm), the influence of the buffer composition, buffer pH and buffer concentration, as well as organic modifier, applied voltage, capillary temperature and injection time were investigated to optimize the method. Optimum results were obtained with 50.0 mM borate buffer at pH 9.5, capillary temperature 30 °C and applied voltage 25 kV. The samples were injected hydrodynamically for 5 s at 50 mbar. Detection wavelength was set at 243 nm. Diflunisal was used as internal standard. The migration times of rosuvastatin calcium and diflunisal were 3.20 ± 0.01 and 4.20 ± 0.02. The total time of analysis was <6 min. The method was validated for rosuvastatin calcium determination in pharmaceutical formulations through following performance parameters: stability, linearity, sensitivity, precision, accuracy, recovery, selectivity, robustness and ruggedness. The linear calibration range was 3.00–200.00 μg mL^?1 and the limits of detection and quantification were 1.00 and 3.00 μg mL^?1 with RSD of 4.38 and 3.09%. The proposed method was applied for the determination of rosuvastatin calcium in its pharmaceutical formulation.     

Capillary electrochromatographic analysis of aliphatic mono- and polycarboxylic acids

The parameters influencing the electrochromatographic separation of aliphatic organic acids in a capillary column with a wall-coated macrocyclic polyamine have been studied. Indirect detection using chromate, pyromellitate, trimellitate, o-phthalate, benzoate and acetate as background electrolytes has been tested. A complete separation of polyprotic acids could be achieved with pyromellitate buffer (7.5 mM, pH 6.5), and satisfactory results for the simultaneous separation of monoprotic acids and polyprotic acids were found using a capillary column of 70 cm (50 cm effective length)x75 microm inner diameter, electrokinetic injection (-10 kV, 10 s), benzoate buffer (6 mM, pH 4.6), separation voltage of -10 kV, and detection at 220 nm. For the separation of the geometric isomers fumarate and maleate, acetate buffer was found the best choice among the background electrolytes tested. The method so established has been applied to the determination of organic acids in soy sauce, brandy, lemon juice, spinach juice and cigarette. From the retention behavior, it was found that the separation mechanism on the bonded phase was influenced by the macrocyclic effect, electrostatic attraction, hydrogen bonding, van der Waals forces, and anion exchange, in addition to the differences in electrophoretic mobility.     

Determination of Dexamethasone in Cosmetics by MEKC

A rapid and reliable method based on micellar electrokinetic capillary chromatography has been developed for the determination of dexamethasone in cosmetics. Effects of buffer composition, concentration and pH, the detection wavelength, separation voltage, and injection time were systematically investigated. The optimum conditions were: 30 mM borax buffer containing 20 mM sodium dodecyl sulfate at pH 9.0, detection at 254 nm, injection time 10 s at a height of 10 cm, and a separation voltage of 15 kV. Under these conditions, the analysis of dexamethasone in cosmetics was carried out within 6 min. The method was validated for stability, precision, linearity and accuracy. Excellent linearity was obtained in the range of 50–1,000 μg mL⁻¹, and acceptable precision, in intra-day and inter-day analysis, was also obtained with relative standard deviation in the range of 0.19–0.86 and 2.50–4.90% for migration time and peak area ratio, respectively. The method was used to analyse eight cosmetic samples purchased locally.     

Analysis of bacitracin by micellar electrokinetic capillary chromatography with mixed micelle in acidic solution

A method used for quantitative analysis of bacitracin with micellar electrokinetic capillary chromatography (MEKC) is described. As capillary zone electrophoresis gave poor separation selectivity, MEKC was preferable. It was found that a zwitterionic surfactant, 3-(N,N-dimethylhexadecylammonium)-propanesulfonate (PAPS) gave the best selectivity among the several surfactants studied. As the analytes tend to adsorb onto the capillary wall due to their positive charge, an acidic solution composed of Tris-phosphate buffer at pH 2.5 was necessary to diminish such adsorption. The peak tailing caused by relatively strong ion pair interaction between the analyte and PAPS micelle could be reduced by adding nonionic surfactant Brij 35 to the PAPS solution. This phenomenon is possibly explained by a mixed micelle mechanism. In order to obtain the optimal conditions and to test the method robustness, a central composite experimental design was performed. The optimal conditions are as follows: 44 cm length of fused-silica capillary with 50 microm inner diameter, 90 mM Tris-phosphate buffer (pH 2.5) containing 17 mM PAPS and 0.3% w/v-Brij 35, 18 kV applied voltage, UV detection at 192 nm and 25 degrees C column temperature. Under the optimal conditions, more than 50 peaks could be obtained in 30 min. The method had a linearity range from 1 to 0.05 mg/mL (concentration of bacitracin A). The limit of quantitation (LOQ) and limit of detection (LOD) were 0.005 and 0.0012 mg/mL, respectively.     

Microemulsion electrokinetic chromatography versus capillary electrochromatography-UV-mass spectrometry for the analysis of flunitrazepam and its major metabolites

Benzodiazepines, namely flunitrazepam and its three major metabolites, were successfully separated by microemulsion electrokinetic chromatography. Separation was achieved using an untreated fused-silica capillary (48 cm (effective length 40 cm) x 50 num) at 25 kV; detection was performed by UV at 220 nm. The microemulsion system consisted of 70 mM octane, 800 mM 1-butanol, 80 mM sodium dodecyl sulfate (SDS) and 10 mM borate buffer, pH 9. Very high efficiencies (up to 400 000 plates) and resolution better than 3 were achieved. Since this technique is not compatible with mass spectrometry (MS) detection, a capillary electrochromatographic (CEC) method was developed to separate flunitrazepam and its metabolites. The effects of mobile phase composition and pH as well as voltage and temperature were systematically investigated. The optimized CEC method allowed the baseline separation of the investigated compounds. For the on-line coupling of CEC with electrospray ionization-mass spectrometry, the column was connected to a void fused-silica capillary using a Teflon connection. This configuration was found efficient and suitable for hyphenation of commercial CEC and MS instrumentation using commercially available CEC columns.     

糖类衍生物在毛细管区带电泳下的分离研究

以新合成的1-萘基-3-甲基-5-吡唑啉酮(NMP)为柱前衍生试剂,采用毛细管区带电泳模式考察并优化了糖类衍生物的分离条件。实验采用58.5cm×50μmi.d.毛细管(有效柱长50cm),55mmol/L硼酸盐缓冲溶液(pH9.46),柱温20℃,分离电压22kV,进样10s,在不加任何添加剂的情况下,高效、快速地实现了9种糖的基线分离,并在最优化条件下进行了唐古特白刺实际样品的分离分析,结果令人满意。     

Micellar electrokinetic capillary chromatography for the separation of cefalexin and its related substances

Micellar electrokinetic capillary chromatography (MEKC) was examined for analysis of cefalexin and its related substances. Good selectivity was obtained with two different buffer solutions: a sodium acetate buffer (50 mM, pH 5.25) containing sodium dodecyl sulfate (50 mM SDS) or sodium phosphate buffer (40 mM, pH 7.0) containing 100 mM SDS. Both methods permit cefalexin to be completely separated from its ten related substances within 20 min. The robustness of the method, using pH 5.25 acetate buffer, was examined by means of a full-fraction factorial design to test the influence of buffer pH, concentration of SDS and buffer concentration. The parameters for validation such as linearity, precision, limit of detection and limit of quantitation are also reported. The results show that method 1 is suitable for the analysis of cefalexin.     

Fourier transform infrared spectroscopy with a sample deposition interface as a quantitative detector in size-exclusion chromatography

Micellar electrokinetic capillary chromatography was developed to analyze plant hormones including gibberellic acid, abscisic acid, indole-3-acetic acid, alpha-naphthaleneacetic acid, 2,4-dichlorophenoxyacetic acid, kinetin-6-furfurylaminopurine and N6-benzyladenine. The influences of some crucial parameters including buffer concentration, pH value, micelle concentration and applied voltage on electrophoretic separation were investigated. Under optimum conditions (50 mM borate as the running buffer containing 50 mM sodium dodecylsulfate, pH 8.0; separation voltage: -15 kV; injection: hydrodynamic injection, 5 s at 50 mbar; temperature: 25 degrees C), a complete separation of seven plant hormones was accomplished within 30 min. Emphasis was placed on improving detection sensitivity in order to detect small amounts of hormones in plant tissue. Multiple wavelength detection and expanded bubble cell capillary were used with enrichment factors of 2 and 3, respectively. In addition, an on-line concentration method of large volume sample stacking was designed. Enrichment factors of up to approximately 10-600 were achieved for these hormones with detection limits down to 0.306 ng/ml. The method was successfully applied to analyzing abscisic acid in flowers of transgenic tobacco.     

Development and validation of a capillary electrophoresis method for the determination of escitalopram and sensitive quantification of its enantiomeric impurity in formulations

A rapid capillary zone electrophoresis method has been developed capable of quantifying 0.05% of R-enantiomer and assaying the main component in escitalopram formulations. Many parameters influencing enantioseparation were investigated, which include chiral selectors, buffer composition and pH, applied voltage, capillary length, temperature, and rinsing procedure. Optimal separation conditions were obtained by using a 25 mM phosphate buffer at pH 7.0, containing 1.6% (w/v) sulfated-β-cyclodextrin with short-end injection at 0.5 psi for 5 s. Online UV detection was performed at 205 nm. A voltage of -20 kV was applied and the capillary temperature was kept at 25°C. Separation was achieved in less than 2 min. The method was further validated, including robustness, stability of the solution, selectivity, linearity (escitalopram from 0.25 μg/mL to 600 μg/mL, y = 1528.3 × +1812.9; R2 = 0.9999), LOD and LOQ (0.08 and 0.25 μg/mL, respectively), precision and accuracy. The proposed method was then applied to the quality control of the bulk sample and tablets of escitalopram (10 mg).