Luminescent properties of KGd1−x(WO4)2:Eux and KGd1−x(WO4)2−y(MoO4)y:Eux phosphors in UV-VUV regions

KGd_1−x(WO₄)_2−y(MoO₄)_y:Eu³⁺_x(0.1?x?0.75, y=0 and 0.2) phosphors are synthesized through traditional solid-state reaction and their luminescent properties in ultraviolet (UV) and vacuum ultraviolet (VUV) regions are investigated. Under 147 nm excitation, these phosphors show characteristic red emission with good color purity. In order to improve their emission intensity, the MoO₄²⁻ (20 wt%) is introduced into the anion of KGd_1−x(WO₄):Eu³⁺_x. The Mo⁶⁺ and Eu³⁺ co-doped KGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped KGd(WO₄)₂ in VUV region. The chromaticity coordination of KGd_0.45(WO₄):Eu³⁺_0.55 is (x=0.669, y=0.331), while that of KGd_0.45(WO₄)_1.8(MoO₄)_0.2:Eu³⁺_0.55 is (x=0.666, y=0.334) in VUV region.     

New spectroscopic studies of the Comet-Tail (AΠi-XΣ) system of the CO molecule

In the electronic emission spectrum of the ¹²C¹⁶O⁺ molecule, 11 bands of the Comet-Tail (A²Π_i-X²Σ⁺) system have been recorded and analyzed. Spin splitting in most of the observed lines of the 0-2, 1-0, 2-0, 2-1, 3-0, 4-0, 4-2, 6-0, 7-0, 7-1, and 8-1 bands, comprising nearly 3400 lines, has been recorded under high resolution by conventional spectroscopy. The rotational analysis of bands has been performed by nonlinear least-squares procedures and by means of effective Hamiltonians of Brown et al. and the rovibronic structure parameters have been obtained. The data of bands of the A-X system and earlier analyzed bands of the B-X and B-A systems have been merged together. As a result of this global fit, the state of information about the energy structure has been significantly enlarged for the A state and enlarged and improved for the X state. Also RKR potential curves for both states and Franck-Condon factors as well as r-centroids of the Comet-Tail system of CO⁺ have been calculated.     

Investigations on the spin Hamiltonian parameters and defect structure for the interstitial Mo centre in TiO2

The spin Hamiltonian parameters, g factors g_i (i = x, y, z) and the hyperfine structure constants A_i for the interstitial Mo⁵⁺ centre in rutile TiO₂ are quantitatively investigated from the perturbation formulas of these parameters for a 4d¹ ion in rhombically compressed octahedra. From the studies, the local compression parameter τ′ (≈0.024) and the rhombic distortion angle δ?′ (≈1.74°) around the impurity Mo⁵⁺ are smaller than the host values (≈0.091 and 3.5°). This means that the oxygen octahedron in the impurity centre has less rhombic distortion than that on the host interstitial site due to the Jahn–Teller effect and occupation of the impurity. The above local lattice distortion of the studied impurity centre is also discussed.     

Study of the electron paramagnetic resonance spectra of Zn(antipyrine)2(NO3)2:VO

In this work, a full ligand-field energy matrix (10×10) diagonalization treatment for 3d¹ ions in tetragonal symmetry is developed on the basis of the two-s.o.-coupling-parameter model. Spin Hamiltonian parameters (g factors g_∥, g_⊥ and hyperfine structure constants A_∥, A_⊥) of the tetragonal V⁴⁺ center in Zn(antipyrine)₂(NO₃)₂ are calculated from the complete energy matrix diagonalization method and the perturbation theory method. The calculated results from both methods are not only close to each other but also in good agreement with the experimental values. Furthermore, the compressed defect structure of V⁴⁺ center is discussed.     

Enhanced luminescence of Ca3B2O6:Dy phosphors by Na-codoping for LED applications

The Ca_2.95−yDy_0.05B₂O₆:yNa⁺ (0≤y≤0.20) phosphors were synthesized at 1100 °C in air by the solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), photoluminescence excitation (PLE), photoluminescence (PL) spectra and thermoluminescence (TL) spectra. The PLE spectra show the excitation peaks from 300 to 400 nm due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid-state lighting and light-emitting diodes (LEDs). The emission of Dy³⁺ ions on 350 nm excitation was observed at 480 nm (blue) due to the ⁴F_9/2→⁶H_15/2 transitions, 575 nm (yellow) due to ⁴F_9/2→⁶H_13/2 transitions and 660 nm (red) due to weak ⁴F_9/2→⁶H_11/2 emissions. The PL results from the investigated Ca_2.95−yDy_0.05B₂O₆:yNa⁺ phosphors show that Dy³⁺ emissions increase with the increase of the Na⁺ codoping ions. The integral intensity of yellow to blue (Y/B) can be tuned by controlling Na⁺ content. By the simulation of white light, the optimal CIE value (0.328, 0.334) can be achieved when the content of Na⁺-codoping ions is y=0.2. The results imply that the Ca_2.95−yDy_0.05B₂O₆:yNa⁺ phosphors could be potentially used as white LEDs.     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Rotational analysis of the (3, 6) band in the comet-tail (AΠi -XΣ) system of CO

The direct observation and rotational analysis of the (3, 6) band in the comet-tail (A²Π_i-X²Σ⁺) system of CO⁺ are carried out for the first time employing optical heterodyne and magnetic rotation enhanced velocity modulation spectroscopy. That 193 lines are assigned to this band ranging from 12 100 to 12 370 cm⁻¹ results in most accurate molecular constants by nonlinear least-squares fitting procedure employing the effective Hamiltonians.     

White light-emitting diodes using blue and yellow-orange-emitting phosphors

A blue-emitting phosphor, BaMgAl₁₀O₁₇:Eu²⁺ (BAM) and a yellow-orange phosphor, Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ were prepared by the solid-state reaction. Excitation and emission spectra results showed that BAM and Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ can be efficiently excited by near-ultraviolet (n-UV)-visible light from 250 to 440 nm. The effects of the doped-Eu²⁺ concentration in BAM and Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ on the photoluminescence were investigated in detail. White light-emitting diodes (LED) was obtained by combining n-UV LED chip (GaN-based 380 nm emitting) with BaMgAl₁₀O₁₇:0.09Eu²⁺ and 0.1Ba²⁺-codoped Sr₃SiO₅: 0.2Eu²⁺ phosphors with the characteristic of color-rendering index of 86, CIE chromaticity coordinates (x,y) of (0.3216,0.3096), and color temperature T_c of 5700 K. As the current increases, the relative intensity simultaneously increases. The CIE chromaticity coordinates (x,y) of the white LED tends to decrease. The correlated color temperature T_c increases from 4100 to 7500 K and the color-rendering index R_a increases from 82 to 87 simultaneously.     

Investigation of the EPR parameters of the rhombic Cu2+ center in (NH4)2Mg(SO4)2·6H2O single crystal

The electron paramagnetic resonance (EPR) parameters (g factors g_x, g_y, g_z and hyperfine structure constants A_x, A_y, A_z) for Cu²⁺ in (NH₄)₂Mg(SO₄)₂·6H₂O (DHMS) crystal are theoretically investigated using the high-order perturbation formulas of these parameters. In the calculations, the ligand orbital and spin–orbit coupling for the impurity Cu²⁺ are taken into account; the required crystal-field parameters are estimated from the superposition model which enables correlation of the crystal-field parameters and hence the EPR parameters with the local structure of the impurity center. The ligand orbital and the spin–orbit coupling contributions are included on the basis of the cluster approach. Based on the calculation, the theoretical EPR parameters show good agreement with the observed values. The results are discussed.     

EPR parameters and defect structure of the tetrahedral Ti3+ defect center in beryl crystal

The EPR parameters (g factors g _i and hyperfine structure constants A _i , where i=x, y, z) of Ti³⁺ ion at the tetrahedral Si⁴⁺ site of beryl crystals are calculated within the rhombic symmetry approximation from the high-order perturbation formulas based on the two-spin-orbit (SO)-parameter model. In these formulas both the contribution due to the SO coupling parameter of the central 3d¹ ion and that of ligand ions are considered. From the calculations, the defect structure of the Ti³⁺ defect center in beryl crystal is estimated and the EPR parameters g _x , g _y , g _z and A _y are reasonably explained. The values of the parameters A _x and A _z (which were not reported) are suggested and remain to be checked by the further experimental studies.     

Temperature-dependence of the structural and afterglow luminance properties of polymer/SrAlxOy:Eu,Dy composites

Although aluminate phosphors have attracted great interest for applications in lamps, cathode ray tubes and plasma display panels, there still remain issues affecting operational parameters such as luminescence efficiency, stability against temperature, high color purity and perfect decay time. In addition, issues involving important aspects of the monoclinic↔hexagonal phase transition temperature still exist. In this work, SrAl_xO_y:Eu²⁺,Dy³⁺ phosphor powders were prepared by the sol–gel method. X-ray diffraction (XRD) has shown that both crystallinity and crystallite sizes increased as the temperature increased. Both SrAl₂O₄ and Sr₂Al₃O₆ phases were observed. Photoluminescence (PL) characterization shows temperature-dependence, which indicates emission at low and high annealing temperatures originating from Eu²⁺ and Eu³⁺ ions. Thermoluminescence glow and decay measurements provided useful insight on the influence of traps on luminescence behavior. Differential scanning calorimetry (DSC) and thermogravimetric studies (TGA) on composites of the phosphor in low density polyethylene (LDPE) demonstrated the varied influence of annealing temperature on some luminescence and thermal properties.     

Theoretical studies on the EPR parameters of the interstitial V4+ in rutile

The electron paramagnetic resonance (EPR) parameters g-factors g _i (i=x, y, z) and the hyperfine structure constants A _i for the interstitial V⁴⁺ in rutile are theoretically studied from the perturbation formulas of these parameters for a 3d¹ ion in rhombically distorted octahedra. On the basis of the studies, the local axial distortion angle Δα′ in the impurity center is found to be about 2° smaller than the host value, characterized as stretching and contraction of the parallel and perpendicular bonding lengths by about 0.28 and 0.14 Å,respectively. This results in the less compressed ligand octahedron because of the Jahn–Teller effect and space effect arising from occupation of the impurity V⁴⁺ at the interstitial site. The theoretical EPR parameters based on the above local structural parameters of this work are in better agreement with the experimental data than those of the previous studies in the absence of the local angular distortion and the ligand orbital contributions. The two experimental optical absorption bands are also reasonably analyzed.     

New analysis of the Comet-Tail (AΠi − XΣ) system in the CO isotopic molecule

The emission spectra of the 0-2, 4-2, and 6-1 bands of the Comet-Tail (A²Π_i − X²Σ⁺) system in the ¹⁴C¹⁶O⁺ isotopic molecule, comprising nearly 600 lines, have been recorded and analyzed for the first time. The spectra have been photographed under high resolution by using conventional spectroscopy, and it was possible to separate and observe most of the lines of all the 12 branches of this transition. The reduction of the individual bands’ spectra has been performed by nonlinear least-squares procedure and by means of effective Hamiltonians of Brown et al. the rovibronic structure parameters have been obtained. The currently investigated bands of the Comet-Tail system and the earlier analyzed bands of the A − X and B − A systems in the ¹⁴C¹⁶O⁺ molecule have been merged together. The results of this global fit made it possible to derive a new set of the equilibrium molecular constants for the A and X states. Then the RKR potential curve parameters for both A and X states and Franck-Condon factors as well as r-centroids for the A − X transition have been calculated for the ¹⁴C¹⁶O⁺ molecule.     

H-1 NMR and Conformations of Halogenated 1,4-Dioxanes and 2,3-Dihydro-1,4-Dioxins

The conformations of halogenated 1,4-dioxanes have generally been studied by X-ray diffraction^1,2 in order to obtain values for the ring dihedral angles. The simple and widely used R value technique^3,4 requires two vicinal coupling constants, J-trans and J-cis, and is not useable when only one vicinal J value results, as in the halogenated dioxanes 1–5 and dihydrodioxins 7–9 listed in Tables 1 and 2.     

Spectroscopic properties of the rubidium and cesium aluminum double molybdate crystals

Infrared, Raman, electron absorption, excitation and emission spectra were measured for RbCr_xAl_1−x(MoO₄)₂ and CsCr_xAl_1−x(MoO₄)₂ crystals (x=0-2%) at the temperatures ranging from 7 to 300 K. A very rich vibronic structure of the emission band was explained and assigned to the respective vibrational modes. One Cr³⁺ center characterized by 2.35 ms lifetimes for rubidium derivative and 1.3 ms for cesium one at 7 K for the ²E→⁴A₂ transition was identified for both crystals. The local structure of the Cr³⁺ surrounding is discussed in terms of the spectroscopic results and the crystal field parameters are derived for both materials.     

An interpretation of the g factors for the tetragonally-compressed Cr centers in YVO4 and YPO4 crystals

The g factors g_∥ and g_⊥ for the tetragonally-compressed (CrO₄)³⁻ clusters in YMO₄ (M=V, P) crystals are calculated from the high-order perturbation formulas based on the two-mechanism model for the compressed d¹ tetrahedra with the ground state |d_z²〉. From the calculated values and by considering a small admixture of the first excited state |d_x²−y²〉 to the ground state |d_z²〉 due to the vibrational motion of ligands (which leads a twinkling compressed tetrahedron to become an elongated one), the observed g_∥ and g_⊥ for Cr⁵⁺ centers in YMO₄ crystals are explained reasonably. The difficulty of the large deviations of g_∥ from g_e (≈2.0023) in the two systems is therefore removed and the above dynamic effect may be the cause which results in the large deviation of g_∥ from g_e for some (CrO₄)³⁻ clusters in crystals.     

Rotational analysis of the (4, 8) band in the A-X system of Cl2

Thirty-four rovibronic spectral lines of the Ω=1/2 component of the (4, 8) band in the A-X system of ³⁵Cl₂⁺ were observed in the range of 16,940-17,010 cm⁻¹, employing optical heterodyne-enhanced velocity modulation spectroscopy. Nonlinear least-squares fitting the effective Hamiltonians results in precise band origin and other molecular constants of the levels involved.     

Luminescence investigation of red phosphors Ca0.54Sr0.34−1.5xEu0.08Smx(MoO4)y (WO4)1−y for UV-white LED device

Ca_0.54Sr_0.34−1.5xEu_0.08Sm_x(MoO₄)_y (WO₄)_1−y red phosphors were prepared by solid-state reaction using Na⁺ as a charge compensator for light-emitting diodes (LED). The effects of Na⁺ concentration, synthesis temperature, reaction time and Eu³⁺ concentration were studied for the properties of luminescence and crystal structure of red phosphors. The results show that the optimum reaction condition is 6%, 900 °C, 2 h and 8%. The photoluminescence spectra show that red phosphors are effectively excited at 616 nm by 292, 395 and 465 nm. The wavelengths of 465 nm nicely match the widely applied emission wavelengths of blue LED chips.     

Analysis of rotational structure in the high-resolution infrared spectrum and assignment of vibrational fundamentals of butadiene-2,3-C2

The 2,3-¹³C₂ isotopomer of butadiene was synthesized, and its fundamental vibrational fundamentals were assigned from a study of its infrared and Raman spectra aided with quantum chemical predictions of frequencies, intensities, and Raman depolarization ratios. For two C-type bands in the high-resolution (0.002 cm⁻¹) infrared spectrum, the rotational structure was analyzed. These bands are for ν₁₁ (a_u) at 907.17 cm⁻¹ and for ν₁₂ (a_u) at 523.37 cm⁻¹. Ground state and upper state rotational constants were fitted to Watson-type Hamiltonians with a full quartic set of centrifugal distortion constants and two sextic ones. For the ground state, A₀ = 1.3545088(7) cm⁻¹, B₀ = 0.1469404(1) cm⁻¹, and C₀ = 0.1325838(2)  cm⁻¹. The small inertial defects of butadiene and two ¹³C₂ isotopomers, as well as for five deuterium isotopomers as previously reported, confirm the planarity of the s-trans rotamer of butadiene.     

Centrifugal distortion analysis of the rotational spectrum of aziridine: Comparison of different Hamiltonians

Previous measurements of rotational spectrum of aziridine up to 1.85 THz have been supplemented by new data in 225-660 GHz frequency range. A total of 1465 transitions (915 of them are newly assigned ones) with maximum values of J = 59 and K_c = 50 were fit to a standard Watson Hamiltonian using the S- and A-reductions and the representations I^r and III^r. Although aziridine is an asymmetric oblate top, the combination (A, III^r) gives the worst results. From the point of view of the convergence of the Hamiltonian, the best results are obtained with the combination (S, III^r). It is explained that the failure of the combination (A, III^r) is due to the large value of the parameter σ=(2C-A-B)/(A-B) which makes some sextic centrifugal distortion constants much too large impeding the convergence of the Hamiltonian. It is also shown that the calculation of the centrifugal distortion constants from a force field is sometimes an ill-conditioned operation. Finally, the use of a non-reduced Hamiltonian (with six quartic centrifugal distortion constants) was successful in the particular case thanks to the method of predicate observations.