核壳结构纳米粒子

纳米粒子由于具有大量的潜在应用,近年来已引起人们极大的关注。通过表面改性(如制备核壳结构的纳米粒子)可以使其获得更多特殊的性质。本文就最近几年制备壳核结构纳米粒子的方法进行了总结,根据其核、壳的不同材料进行了分类,并对其中某些方法进行了比较。     

CdS/SiO2纳米棒核/壳结构的制备和发光性能

利用在醇介质中氨水催化水解硅酸乙酯（TEOS）制备SiO2来包覆半导体CdS纳米棒而形成CdS/SiO2核/壳结构.通过X射线衍射（XRD）、透射电子显微镜（TEM）证实SiO2包覆壳层为非晶，且壳层厚度随TEOS浓度的增大而增加，在10～30 nm之间.并研究了其紫外 可见吸收光谱（UV Vis）和荧光发射光谱(PL)的性质.     

金纳米棒的光学性质研究进展

金纳米棒在紫外-可见-近红外(UV-Vis-NIR)波段具有独特的可调节表面等离子体共振(SPR)光学特性,其良好的稳定性、低生物毒性、亮丽的色彩和在催化、信息存储、生物医学等领域广阔的应用前景受到相关研究领域的广泛关注.结合已有的研究基础,本文主要综述了金纳米棒光学性质的研究进展,包括表面等离子体共振、局域场增强效应、共振耦合效应及荧光特性,并对金纳米棒的应用做了展望.     

一种简易合成具有近红外吸收的纳米金壳球体方法

对经典的合成方法进行了详细的系统性的研究,通过改变合成过程中各反应物的参数,简易地得到了稳定的具有近红外吸收的纳米金壳球体。利用紫外可见光谱、动态光散射仪和透射电镜研究了制备过程中的各个参数对纳米金壳球体光学性质的影响。实验结果显示胺化试剂的用量以及先导试剂的预处理等在制备过程中都是重要影响因素。由改进方法所制备的纳米金壳球体具有很窄的粒径分布,并能在没有外加表面活性剂的条件下稳定地单分散于水溶液中。这些方法的改进提供了一种简易制备具有近红外吸收的纳米金壳球体的方法,从而有利于拓展此类纳米粒子在生物医学领域中的应用研究     

基础实验:金纳米粒子的制备及其光学性质

围绕金纳米粒子前沿内容,设计了一个简易的本科生基础实验,利用柠檬酸钠还原氯金酸法制备分散性好的金纳米粒子溶液,讨论了其尺寸与颜色的关系,探究了不同电解质和非电解质对金纳米粒子团聚及其颜色的影响,初步了解金纳米粒子的光学特性和探针效应基本原理。     

以碳微球为核的金纳米壳球体的制备

通过水热合成法制备了单分散碳微球, 并以此单分散碳微球为核, 利用其表面修饰的银纳米粒子作为种子, 进一步还原制备了以碳微球为核、以金为壳的金纳米壳(Nanoshell)球体. 通过透射电子显微镜和紫外可见吸收光谱对其形态以及光谱性质进行了表征. 研究结果表明, 采用该种方法制备出来的碳微球具有良好的单分散性, 表面修饰简便快捷, 利用碳微球为核制备的金纳米壳球体尺寸可控, 在近红外范围内有强吸收. 实验结果证明该方法是制备金纳米壳球体的一种有效新方法.     

具有核壳结构的ZnO纳米棒@Ni-Co双氢氧化物复合物纳米片阵列的制备及其电化学性能

通过两步水热合成法制备了具有核壳结构的ZnO纳米棒@Ni-Co双氢氧化物复合材料纳米片阵列.首先,以碳布为基底,水热法生成的ZnO沉积在碳布上形成ZnO纳米棒花簇.其次,以ZnO纳米棒为模板,水热法生成的Ni-Co双氢氧化物纳米片沉积在ZnO纳米棒表面,形成ZnO纳米棒@Ni-Co双氢氧化物纳米片复合材料阵列.形貌、结构分析和电化学性能测试表明,以碳布为基底,成功地合成了以ZnO纳米棒为模板并具有核壳结构的ZnO纳米棒@Ni-Co双氢氧化物复合材料纳米片阵列,该复合材料纳米片阵列具有较大的纵横比,且分散均匀.合成的ZnO纳米棒@Ni-Co双氢氧化物复合材料纳米片阵列具有良好的电化学性能,当电流密度为1 A/g时,其比电容值可达531.6 F/g,该复合材料在超级电容器电极材料领域具有良好的应用前景.     

银纳米棒光学性质的离散偶极近似计算

The optical properties of metal nanoparticles are quite different from those of the bulk materials mainly due to the collective oscillations of their conduction electrons known as the surface plasmon resonance（SPR）,which is strongly dependent on the particle shape and size,and the dielectric properties of the local environment where the nanoparticles are embedded in. Based on the discrete dipole approximation（DDA）method,we studied the optical properties of silver nanorods with different aspect ratios in some special dielectric environment including air,water,acetone,methylene chloride and pyridine. The DDA simulation of the ultraviolet-visible（UV-Vis）extinction spectra of silver nanorods with varying aspect ratios shows the plasmons absorption splits into two bands corresponding to the oscillation of the free electrons along and perpendicular to the long axis of the rods. The transverse mode shows almost a fixed resonance at about 350 nm while the resonance of the longitudinal mode is red-shifted and strongly depends on the aspect ratio of the nanorods. An empirical formula was given to predict the peak position of the longitudinal palsmon band of the silver nanorods with different aspect ratios in the air. The calculation result also shows the maximum of the longitudinal plasmon band of a silver nanorod with a fixed aspect ratio depends on the medium dielectric constant in a linear way. The TEM image and corresponding UV-Vis extinction spectrum of silver nanosphere and nanorods synthesized by our lab are in good agreement with the DDA simulation results.     

基于金纳米粒子光学性质的比色传感器及其在食品安全检测中的应用

对金纳米粒子的合成方法的发展及其现状、金纳米粒子的光学性质及其功能化以及基于金纳米粒子光学性质的比色传感器的原理作了简要的回顾后,对其在食品安全检测领域在近十年间的应用概况作了综述,主要涉及重金属离子、DNA、致病菌、农药残留、抗生素等药物残留、有毒有害化学物质、真菌毒素等检测等七个方面,并对此领域的发展前景作了简要展望(引用文献59篇)。     

CeO2@Au核壳结构纳米粒子的合成与性质研究

采用沉淀法制备了球形CeO2纳米粒子,将其作为核粒子溶液,然后向其中滴加四氯合金酸溶液,在CeO2胶体表面利用柠檬酸钠还原[AuCl4]-离子,得到了CeO2@Au核壳结构纳米粒子。TEM分析表明,CeO2纳米粒子分散效果好,粒径为5 nm;CeO2@Au核壳粒子为球形,无团聚,平均粒径为15 nm。XRD分析表明,CeO2@Au核壳粒子为晶型结构,属于立方晶系,CeO2空间群为O5H-FM3M,Au的空间群为Fm-3m。UV-vis分析发现,CeO2@Au核壳粒子在300和520 nm处呈现出两个比较强的吸收峰,分别对应于CeO2胶体溶液的吸收峰和金粒子的表面等离子共振吸收峰。EDS分析了核壳结构CeO2@Au纳米粒子中存在Ce,O和Au 3种元素。XPS分析表明,Ce3d3/2和Au4f电子结合能与标准结合能相比发生了变化,说明CeO2与Au之间存在着相互作用。     

梨形核壳结构氧化锌/银亚微米球的制备、表征及光学性能

利用亚锡离子还原银离子生成的金属银沉积在合成的梨形氧化锌表面作为晶种,进一步生长银纳米粒子,制备了梨形的、核壳结构的、单分散的氧化锌/银亚微米球。利用X射线衍射、透射电镜、能量色散X射线谱、紫外可见吸收谱及光致发光谱对所制备样品的形貌、微观结构、组成和光学性能进行了表征。结果表明:(1)样品是由梨形亚微米氧化锌核和银纳米颗粒壳组成;(2)在氧化锌表面的银纳米粒子作为光激发产生的电子捕获剂提高了光产生的载流子的分离效率,在能量没有改变的情况下减少了紫外发射光的强度,淬灭了可见发射光。     

Water-Dispersible Gold Nanoclusters: Synthesis Strategies,Optical Properties,and Biological Applications

Atomically precise gold nanoclusters (AuNCs) are an emerging class of quantum-sized nanomaterials. Intrinsic discrete electronic energy levels have endowed them with fascinating electronic and optical properties. They have been widely applied in the fields of optoelectronics, photovoltaics, catalysis, biochemical sensing, bio-imaging, and therapeutics. Nevertheless, most AuNCs are synthesized in organic solvents and do not disperse in aqueous solutions; this restricts their biological applications. In this review, we focus on the recent progress in the preparation of water-dispersible AuNCs and their biological applications. We first review different methods of synthesis, including direct synthesis from hydrophilic templates and indirect phase transfer of hydrophobic AuNCs. We then discuss their photophysical properties, such as emission enhancement and fluorescence lifetimes. Next, we summarize their latest applications in the fields of biosensing, biolabeling, and bioimaging. Finally, we outline the challenges and potential for the future development of these AuNCs.     

金纳米棒的制备、生长机理及纯化

金纳米棒由于其独特物理性质而在众多的各向异性金纳米颗粒中赢得了关注。目前,金纳米棒在纳米电子学、光学、生物医药等研究领域均具有良好的应用前景。对金纳米棒合成的有效调控直接决定着其形状、尺寸和长径比,而这些又进一步影响着金纳米棒的物理性质。本文梳理了金纳米棒制备方法的发展脉络,以模板法、电化学方法、种子生长法以及近年来出现的无种子生长法为主线,系统综述了金纳米棒制备过程实验参数调控对产物结构、物理性质的影响,详细阐述了关于单晶以及孪晶金纳米棒的生长机理,并介绍了提高产物纯度的分离纯化手段。     

金纳米球和金纳米棒的制备及其光热催化性能

以氯金酸(HAuCl_4)为原料,硼氢化钠(NaBH_4)为还原剂,聚乙烯吡咯烷酮K30(PVP)为稳定剂制备了尺寸5 nm的金纳米球;以阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)为模板剂和油酸钠(NaOL)稳定剂,用种子生长法制备了不同长径比(R=2.5~4)的金纳米棒。在2 W·cm~(-2)的808 nm激光照射10 min条件下,C(0.4 mg·mL~(-1))浓度金纳米球溶液升温10.2℃,该溶液可催化血液中亚硝基硫醇释放NO,最大释放量可达1.42 nmol·L~(-1);相同光热及催化条件下,C(0.4 mg·mL~(-1))浓度金纳米棒(R=3.01)溶液升温41.3℃,该溶液催化血液中亚硝基硫醇释放NO最大释放量可达1.89 nmol·L~(-1)。金纳米球和金纳米棒的光热及催化性能随着浓度增加而增强,金纳米棒的光热及催化性能要优于金纳米球。     

Electrochemical Synthesis of Plasmonic Nanostructures

Thanks to their tunable and strong interaction with light, plasmonic nanostructures have been investigated for a wide range of applications. In most cases, controlling the electric field enhancement at the metal surface is crucial. This can be achieved by controlling the metal nanostructure size, shape, and location in three dimensions, which is synthetically challenging. Electrochemical methods can provide a reliable, simple, and cost-effective approach to nanostructure metals with a high degree of geometrical freedom. Herein, we review the use of electrochemistry to synthesize metal nanostructures in the context of plasmonics. Both template-free and templated electrochemical syntheses are presented, along with their strengths and limitations. While template-free techniques can be used for the mass production of low-cost but efficient plasmonic substrates, templated approaches offer an unprecedented synthetic control. Thus, a special emphasis is given to templated electrochemical lithographies, which can be used to synthesize complex metal architectures with defined dimensions and compositions in one, two and three dimensions. These techniques provide a spatial resolution down to the sub-10 nanometer range and are particularly successful at synthesizing well-defined metal nanoscale gaps that provide very large electric field enhancements, which are relevant for both fundamental and applied research in plasmonics.     

Synthesis,Optical Properties,and Sensing Applications of Gold Nanodots

In this Personal Account, we briefly address our journey in developing photoluminescent nanomaterials for sensing purposes, with a focus on gold nanodots (Au NDs). Their synthetic strategies, optical properties, and sensing applications are emphasized. The Au NDs can be simply prepared from the etching of small‐sized Au nanoparticles (<3 nm in diameter) by thiol compounds such as 11‐mercaptoundecanoic acid under alkaline conditions. This simple approach allows the preparation of various functional Au NDs by choosing different thiol compounds as etching agents. Since the optical properties of Au NDs are highly dependent on the core and shell of each Au ND, the selection of etching reagents is important. Over the years we have developed various sensing systems using Au NDs for the detection of metal ions, anions, and proteins, based on analyte‐induced photoluminescence quenching/enhancement of Au NDs as a result of changes in their oxidation state, shell composition, and structure.     

Precisely Size‐Tunable Magnetic/Plasmonic Core/Shell Nanoparticles with Controlled Optical Properties

Star‐like amphiphilic triblock copolymers were rationally designed and synthesized by combining two sequential atom‐transfer radical polymerization reactions with a click reaction. Subsequently, a family of uniform magnetic/plasmonic core/shell nanoparticles was crafted by capitalizing on these triblock copolymers as nanoreactors. The diameter of the magnetic core and the thickness of the plasmonic shell could be independently and accurately controlled by varying the molecular weights (i.e., the chain lengths) of the inner and intermediate blocks of the star‐like triblock copolymers, respectively. The surface plasmonic absorption of core/shell nanoparticles with different core diameters and shell thicknesses was systematically studied and theoretically modeled. This robust strategy provides easy access to a large variety of multifunctional nanoparticles with large lattice mismatches for use in optics, optoelectronics, catalysis, or bioimaging.     

光化学合成Au核@Pd壳复合纳米粒子及其表征

在PEG-丙酮溶液体系中, 采用紫外光辐射还原Au(Ⅲ), Pd(Ⅱ)离子混合物和以Au晶种为核、紫外光辐射还原Pd(Ⅱ)使其沉积在Au晶种表面上这两种方法, 合成了Au核@Pd壳复合纳米粒子. 通过改变Au(Ⅲ)离子或Au晶种对Pd(Ⅱ)离子的摩尔比调节复合粒子的尺寸和Pd壳厚度, 分别获得了直径范围为5.6~4.6 nm和4.6~6.2 nm的复合粒子. 利用UV-Vis吸收光谱、TEM、HR-TEM和XPS等表征手段, 证明了合成的纳米粒子为核-壳复合结构. 研究了Au@Pd纳米粒子的直径随溶液中Au(Ⅲ)/Pd(Ⅱ)摩尔比的改变而变化的规律; 对Au核向Pd壳的供电子作用以及复合粒子的光化学形成机理进行了讨论.     

含1,3,4-噻二唑和偶氮苯结构聚酰胺的合成及光学性能

合成了同时含有偶氮苯和1,3,4-噻二唑的新型聚酰胺(P1,P2),采用FT-IR、1H NMR、GPC和TGA技术对其结构进行了表征和热性能测试。 P1和P2的特性粘数分别为0.14和0.12 dL/g,质均相对分子质量Mw和相对分子质量分布指数PDI分别为28.8、24.8 kg/mol和1.71、1.74,质量损失5%的温度分别为320和322 ℃。 长烷氧基侧链的引入改善了聚合物在氯仿和四氢呋喃等有机溶剂中的溶解性。 采用紫外-可见吸收光谱、荧光光谱对聚合物的光学性能进行了研究。 结果表明,在365 nm紫外光照射下,聚合物中偶氮苯发生反 顺异构化,P1和P2光稳态时顺式异构体比例分别为86.8%和77.4%,反 顺异构化效率分别为82.7%和73.7%。 在366和363 nm光激发下,P1和P2的固体分别在418和425 nm处紫光波长范围内发射荧光。     

两个查尔酮衍生物的合成、理论计算及三阶非线性光学性质

合成了两个查尔酮类衍生物1-(4-甲基苯基)-3-(4-二甲氨基苯基)丙烯酮(1)和1-(4-甲基苯基)-3-(4-甲氧基苯基)丙烯酮(2),通过1H NMR、13C NMR、IR、HR-MS对其进行结构表征。采用4f相位相干成像技术测定了化合物1和2的三阶NLO性质,确定了相关参数:脉冲宽度4nm,激光波长分别为500和440nm,1:非线性吸收系数β=7.3×10-10m/W,非线性折射率n2=-3.6×10-17m2/W,三阶非线性极化率χ(3)=2.56×10-11esu;2:β=-4.8×10-10m/W,n2=2.0×10-17m2/W,χ(3)=1.45×10-11esu。测定了化合物紫外光谱,并通过DSC考察了化合物的热稳定性。采用密度泛函方法计算了化合物1和2的轨道能量和极化率,结果表明电子转移能在分子内部进行,显示出良好的非线性光学活性。