Spectrophotometric study of cobalt, nickel, copper, zinc, cadmium and lead complexes with murexide in dimethylsulphoxide solution

The complexation reactions between murexide and Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+) and Pb(2+) ions have been studied spectrophotometrically in dimethylsulphoxide solution at 25 degrees . The stoichiometry of the complexes was found to be 1:1. The stability constants of the complexes were determined, and found to follow the Irving-Williams rule for the cations of the first transition series. In dimethylsulphoxide solution, the complexes are much more stable than those in aqueous solution.     

The stability of the metal complexes of cyclic tetra-aza tetra-acetic acids

The stability constants of the complexes formed by three tetra-aza macrocyclic complexones (DOTA, TRITA and TETA) with Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+) and Pb(2+) were determined with an automated titration instrument with data acquisition and the calculations were performed with the Superquad program, confirming and extending the range of values previously available. Both 1:1 and 2:1 metal-to-ligand complexes were now considered including their protonated species. The results show that DOTA is a powerful but unselective ligand whereas TETA, although not so powerful as DOTA, is an interesting selective ligand for pairs of metal ions, e.g., Cd(2+) and Pb(2+).     

New dioxadiaza- and trioxadiaza-macrocycles containing one dibenzofuran unit with two amino pendant arms: synthesis, protonation and complexation studies

New dioxadiaza- and trioxadiaza-macrocycles containing one rigid dibenzofuran unit (DBF) and N-(2-aminoethyl) pendant arms were synthesized, N,N'-bis(2-aminoethyl)-[17](DBF)N(2)O(2) (L(1)) and N,N'-bis(2-aminoethyl)-[22](DBF)N(2)O(3) (L(2)), respectively. The binding properties of both macrocycles to metal ions and structural studies of their metal complexes were carried out. The protonation constants of both compounds and the stability constants of their complexes with Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), and Pb(2+) were determined at 298.2 K, in aqueous solutions, and at ionic strength 0.10 mol dm(-3) in KNO(3). Mononuclear complexes with both ligands were formed, and dinuclear complexes were only found for L(2). The thermodynamic binding affinities of the metal complexes of L(2) are lower than those of L(1) as expected, but the Pb(2+) complexes of both macrocycles exhibit close stability constant values. On the other hand, the binding affinities of Cd(2+) and Pb(2+) for L(1) are very high, when compared to those of Co(2+), Ni(2+) and Zn(2+). These interesting properties were explained by the presence of the rigid DBF moiety in the backbone of the macrocycle and to the special match between the macrocyclic cavity size and the studied larger metal ions. To elucidate the adopted structures of complexes in solution, the nickel(II) and copper(II) complexes with both ligands were further studied by UV-vis-NIR spectroscopy in DMSO-H(2)O 1 : 1 (v/v) solution. The copper(II) complexes were also studied by EPR spectroscopy in the same mixture of solvents. The crystal structure of the copper complex of L(1) was also determined. The copper(II) displays an octahedral geometry, the four nitrogen atoms forming the equatorial plane and two oxygen atoms, one from the DBF unit and the other one from the ether oxygen, in axial positions. One of the ether oxygens of the macrocycle is out of the coordination sphere. Our results led us to suggest that this geometry is also adopted by the Co(2+) to Zn(2+) complexes, and only the larger Cd(2+) and Pb(2+) manage to form complexes with the involvement of all the oxygen atoms of the macrocyclic backbone.     

Chemometric analysis of voltammetric data on metal ion binding by selenocystine

The behavior of selenocystine (SeCyst) alone or in the presence of various metal ions (Bi(3+), Cd(2+), Co(2+), Cu(2+), Cr(3+), Ni(2+), Pb(2+), and Zn(2+)) was studied using differential pulse voltammetry (DPV) over a wide pH range. Voltammetric data matrices were analyzed using chemometric tools recently developed for nonlinear data: pHfit and Gaussian Peak Adjustment (GPA). Under the experimental conditions tested, no evidence was found for the formation of metal complexes with Bi(3+), Cu(2+), Cr(3+), and Pb(2+). In contrast, SeCyst formed electroinactive complexes with Co(2+) and Ni(2+) and kinetically inert but electroactive complexes with Cd(2+) and Zn(2+). Titrations with Cd(2+), Co(2+), Ni(2+), and Zn(2+) produced data that were reasonably consistent with the formation of stable 1:1 M(SeCyst) complexes.     

Capillary isotachophoretic determinations of metal ions by use of complexation equilibria in acetone-water medium

The determination of metal ions by capillary isotachophoresis and the complexation equilibria between metal ions and polyaminopolycarboxylic acids has been investigated. A seven-component mixture of metal ions can be separated in 45% v/v acetone-water medium when EDTA or DCTA is used as the terminating ion. Linear calibration graphs are obtained for a standard mixture of Mn(+), Cu(2+), Zn(2+), Cd(2+), Pb(2+) and Fe(3+) in the range 0.5-5.0 nmole, with relative standard deviations of 1.0% or better. The effective mobilities of the Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) complexes increase in parallel with the stability constants, except for the Cu(II) complexes. It is concluded that the abnormal behaviour of the Cu(II) complexes may be attributed to a difference in steric configuration.     

Metal ion-binding properties of 1-methyl-4-aminobenzimidazole (=9-methyl-1,3-dideazaadenine) and 1,4-dimethylbenzimidazole (=6,9-dimethyl-1,3-dideazapurine). quantification of the steric effect of the 6-amino group on metal ion binding at the N7 site of the adenine residue

The stability constants of the 1:1 complexes formed between Mg(2+), Ca(2+), Sr(2+), Ba(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), or Cd(2+) (=M(2+)) and 1-methyl-4-aminobenzimidazole (MABI) or 1,4-dimethylbenzimidazole (DMBI) were determined by potentiometric pH titrations in aqueous solution (25 degrees C; I = 0.5 M, NaNO(3)). Some of the stability constants were also measured by UV spectrophotometry. The acidity constants of the species H(2)(MABI)(2+) and H(DMBI)(+) were determined by the same methods, some twice. Comparison of the stability constants of the M(MABI)(2+) and M(DMBI)(2+) complexes with those calculated from log versus p straight-line plots, which were established previously for sterically unhindered benzimidazole-type ligands (=L), reveals that the stabilities of the M(MABI)(2+) and M(DMBI)(2+) complexes are significantly reduced due to steric effects of the C4 substituents on metal ion binding at N3. This effect is more pronounced in the M(DMBI)(2+) complexes. Considering the steric equivalence of methyl and (noncoordinating) amino groups (as they occur in adenines), it is concluded that the same extent of steric inhibition by the (C6)NH(2) group is to be expected on metal ion binding at N7 with adenine derivatives. The basicity of the amino group in MABI is significantly higher than in its corresponding adenine derivative. Indeed, it is concluded that in the M(MABI)(2+) complexes chelate formation involving the amino group occurs to some extent. The formation degrees of these "closed" species are calculated; they vary for the complexes of Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), or Cd(2+) between about 50 and 90%. The stability of the M(MABI)(2+) and M(DMBI)(2+) complexes with the alkaline earth ions is very low but unaffected by the C4 substituent; this probably indicates that in these instances outersphere complexes (with a water molecule between N3 and the metal ion) are formed.     

Stability constants of some bivalent first row transition metal chelates of dicarboxylic acids containing ether linkages

The stability constants of the Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+) and Zn(2+) complexes with four acids of the type HOOCCH(2)O(CH(2)CH(2)O)(n) CH(2)COOH (n = 0-3) are reported. For n = 0 the constants are in the Irving-Williams order, but not for n = 1-3.     

Synthesis, structural charaterization, and electrochemical and optical properties of ferrocene-triazole-pyridine triads

The synthesis and electrochemical, optical, and cation-sensing properties of the ferrocene-triazole-pyridine triads 3 and 5 are presented. Azidoferrocene 1 and 1,1'-diazidoferrocene 4 underwent the "click" reaction with 2-ethynylpyridine to give the triads 3 and 5 in 81% and 68% yield, respectively. Electrochemical studies carried out in CH(3)CN in the presence of increasing amounts of Zn(2+), Ni(2+), Cd(2+), Hg(2+), and Pb(2+) metal cations, showed that the wave corresponding to the ferrocene/ferrocenium redox couple is anodically shifted by 70-130 mV for triad 3 and 167-214 mV for triad 5. The maximum shift of the ferrocene oxidation wave was found for 5 in the presence of Zn(2+). In addition, the low-energy band of the absorption spectra of 3 and 5 are red-shifted (Δλ = 5-10 nm) upon complexation with these metal cations. The crystal structures of compounds 3 and 5 and the complex [3(2)·Zn](2+) have been determined by single-crystal X-ray methods. (1)H NMR studies as well as density functional theory calculations have been carried out to get information about the binding sites that are involved in the complexation process.     

Oxidative cyclization of thiosemicarbazone: an optical and turn-on fluorescent chemodosimeter for Cu(II)

A weakly fluorescent thiosemicabazone (L(1)H) was found to be a selective optical and "turn-on" fluorescent chemodosimeter for Cu(2+) ion in aqueous medium. A significant fluorescence enhancement along with change in color was only observed for Cu(2+) ion; among the other tested metal ions (viz. Na(+), K(+), Mg(2+), Ca(2+), Cr(3+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), Ag(+), Ni(2+), Co(2+), Fe(3+) and Mn(2+)). The Cu(2+) selectivity resulted from an oxidative cyclization of the weak fluorescent L(1)H into highly fluorescent rigid 4,5-dihydro-5,5-dimethyl-4-(naphthalen-5-yl)-1,2,4-triazole-3-thione (L(2)). The signaling mechanism has been confirmed by independent synthesis with detail characterization of L(2).     

Effect of Nitrogen Methylation on Cation and Anion Coordination by Hexa- and Heptaazamacrocycles. Catalytic Properties of These Ligands in ATP Dephosphorylation

The stability constants of the complexes formed by 1,10-dimethyl-1,4,7,10,13,16-hexaazacyclooctadecane (L) and 1,4,7-trimethyl-1,4,7,10,13,16,19-heptaazacyclohenicosane (L1) with Ni(2+), Cu(2+), Zn(2+), Cd(2+), and Pb(2+), as well as that for the formation of PbL2(2+) (L2 = 1,4,7,13-tetramethyl-1,4,7,10,13,16-hexaazacyclooctadecane), were determined by means of potentiometric (pH-metric) titrations in 0.15 mol dm(-)(3) NaClO(4) at 298.1 +/- 0.1 K. The enthalpy changes for the formation of Cu(2+) complexes with L and L1 were measured by means of microcalorimetry. These thermodynamic data were compared with those previously reported for L2, 1,4,7,10,13,16-hexaazacyclooctadecane (L3), and 1,4,7,10,13,16,19-heptaazacyclohenicosane (L4) evidencing that nitrogen methylation can produce lower or higher complex stability depending on the metal ion and the number of methylated nitrogens. The equilibria of complexation of ATP(4)(-), ADP(3)(-), AMP(2)(-), P(2)O(7)(4)(-), and [Co(CN)(6)](3)(-) by Land L1 were studied by means of pH-metric titrations in 0.15 mol dm(-)(3) NaClO(4) at 298.1 +/- 0.1 K. The catalytic reactions of ATP dephosphorylation induced by these ligands in solution were followed by (31)P NMR spectroscopy at different temperature and pH values. L is the most appropriate receptor, among L-L4, in the recognition of the nucleotide. The catalytic efficiency of hexa- and heptaazaligands increases in the order L < L3 < L2 and L1 < L4, respectively, L4 being the most efficient. Namely, di- and tetramethylation of L3 produces opposite effects on its catalytic properties.     

Inosylyl(3'-->5')inosine (IpI-). Acid-base and metal ion-binding properties of a dinucleoside monophosphate in aqueous solution

The acidity constants of the (N7)H(+) sites of inosylyl(3'-->5')inosine (IpI(-)) were estimated and those of its (N1)H sites were measured by potentiometric pH titrations in aqueous solution (25 degrees C; I = 0.1 M, NaNO3). The same method was used for the determination of the stability constants of the 1:1 complexes formed between Mg(2+), Co(2+), Ni(2+), Zn(2+), or Cd(2+) (= M(2+)) and (IpI - H)(2-) and, in the case of Mg(2+), also of (IpI - 2H)(3-). The stability constants of the M(IpI)(+) complexes were estimated. The acidity constants of H(inosine)(+) and the stability constants of the M(Ino)(2+) and M(Ino - H)(+) complexes were taken from the literature. The comparison of these and related data allows the conclusion that, in the M(IpI - H) species, chelates are formed; most likely they are preferably of an N7/N7 type. For the metal ions Co(2+), Ni(2+), Zn(2+), or Cd(2+), the formation degrees of the chelates are on the order of 60-80%; no chelates could be detected for the Mg(IpI - H) complexes. It is noteworthy that the (N1)H deprotonation, which leads to the M(IpI - H) species, occurs in all M(IpI)(+) complexes in the physiological pH range of about 7.5 or even below.     

Complex formation between phytic acid and divalent metal ions: a solution equilibria and solid state investigation

An investigation on the complex formation equilibria between divalent metal ions Me (with Me=Mn, Co, Ni, Cu, Cd, and Pb) and phytic acid (H(12)L) is presented. Experiments were performed through a potentiometric methodology by measuring, at 25 degrees C, the proton and, in some cases (Cu(2+), Cd(2+), and Pb(2+)), also the metal ion activity at equilibrium in solutions containing, besides the metal and the ligand, 3 M NaClO(4) as the ionic medium. Unhydrolyzed solutions of the metal ion at millimolar concentration levels were titrated with solutions of about 10 mM sodium phytate, until the formation of a solid phase took place (always at pH approximately 2.5, except in the case of Cu(2+), which formed soluble complexes up to pH approximately 3.3). Coulometry was employed to produce very dilute solutions of either Cu(2+), Cd(2+), or Pb(2+) of accurately known composition. The emf data were explained by assuming, in the acidity interval explored, the formation of the complexes of general stoichiometry MeH(5)L(5-) and Me(2)H(3)L(5-). Coordination compounds in the solid state were also synthesized and characterized by elemental analysis, thermal analysis, and ICP spectroscopy. The solids had a general stoichiometry Me(6)H (t)LCl (t). x H(2)O, with the following t and x values for each metal investigated: Me ( t; x) = Mn (4; 2); Co (4; 2); Ni (4; 2); Cu (2; 2.5); Zn (2; 1); Sn (6; 6).     

Formation and dissociation kinetics of triaza-crown-alkanoic acid complexes of transition metal(II) and lanthanide (III)

The formation and dissociation rates of some transition metal(II) and lanthanide(III) complexes of the 1,7,13-triaza-4,10,16-trioxacyclooctadecane N',N',N'-triacetic acid (1) and 1,7,13-triaza-4,10,16-trioxacyclooctadecane-N',N',N'- trimethylacetic acid (2) have been measured by the use of stopped-flow and conventional spectrophotometry. Experimental observations were made at 25.0 +/- 0.1 degrees C and at an ionic strength of 0.10 M KCl. The complexation of Zn(2+) and Cu(2+) ions with 1 and 2 proceeds through the formation of an intermediate complex (MH(3)L(+) *) in which the metal ion is incompletely coordinated. This may then lead to a final product in the rate-determining step. Between pH 4.68 and 5.55, the diprotonated (H(2)L(-)) form is revealed to be a kinetically active species despite its low concentration. The stability constants (log K (MH (3)L (+) *)) and specific base-catalyzed rate constants (k(OH)) of intermediate complexes have been determined from the kinetic data. The dissociation reactions of 1 and 2 complexes of Co(2+), Ni(2+), Zn(2+), Ce(3+), Eu(3+) and Yb(3+) were investigated with Cu(2+) ions as a scavenger in acetate buffer. All complexes exhibit acid-independent and acid-catalyzed contributions. The buffer and Cu(2+) concentration dependence on the dissociation rate has also been investigated. The metal and ligand effects on the dissociation rate of some transition metal(II) and lanthanide(III) complexes are discussed in terms of the ionic radius of the metal ions, the side-pendant arms and the rigidity of the ligands.     

Metal complexes with a new N(4)O(3) amine pendant-armed macrocyclic ligand: synthesis, characterization, crystal structures, and fluorescence studies

The synthesis of a new oxaaza macrocyclic ligand, L, derived from O(1),O(7)-bis(2-formylphenyl)-1,4,7-trioxaheptane and tren containing an amine terminal pendant arm, and its metal complexation with alkaline earth (M = Ca(2+), Sr(2+), Ba(2+)), transition (M = Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+)), post-transition (M = Pb(2+)), and Y(3+) and lanthanide (M = La(3+), Er(3+)) metal ions are reported. Crystal structures of [H(2)L](ClO(4))(2).3H(2)O, [PbL](ClO(4))(2), and [ZnLCl](ClO(4)).H(2)O are also reported. In the [PbL] complex, the metal ion is located inside the macrocyclic cavity coordinated by all N(4)O(3) donor atoms while, in the [ZnLCl] complex, the metal ion is encapsulated only by the nitrogen atoms present in the ligand. pi-pi interactions in the [H(2)L](ClO(4))(2).3H(2)O and [PbL](ClO(4))(2) structures are observed. Protonation and Zn(2+), Cd(2+), and Cu(2+) complexation were studied by means of potentiometric, UV-vis, and fluorescent emission measurements. The 10-fold fluorescence emission increase observed in the pH range 7-9 in the presence of Zn(2+) leads to L as a good sensor for this biological metal in water solution.     

A naphthalene-based Al3+ selective fluorescent sensor for living cell imaging

An efficient fluorescent Al(3+) receptor, N-(2-hydroxy-1-naphthalene)-N'-(2-(2-hydroxy-1-naphthalene)amino-ethyl)-ethane-1,2-diamine (L) has been synthesized by the condensation reaction between 2-hydroxy naphthaldehyde and diethylenetriamine. High selectivity and affinity of L towards Al(3+) in ethanol (EtOH) as well as in HEPES buffer at pH 7.4, makes it suitable to detect intracellular Al(3+) with fluorescence microscopy. Metal ions, viz. Li(+), Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Ag(+), Cd(2+), Hg(2+) and Pb(2+) do not interfere. The lowest detection limit for Al(3+) is 3.0 × 10(-7) M and 1.0 × 10(-7) M in EtOH and HEPES buffer respectively.     

Terphenyl-phenanthroline conjugate as a Zn(2+) sensor: H(2)PO(4)(-) induced tuning of emission wavelength

A new terphenyl-based macrocycle 5 incorporating phenanthroline as a fluorophore has been designed, synthesized and examined for its recognition ability toward various cations (Pb(2+), Hg(2+), Ba(2+), Cd(2+), Ag(+), Zn(2+), Cu(2+), Ni(2+), Co(2+), K(+), Mg(2+), Na(+) and Li(+)) by UV-vis, fluorescence and NMR spectroscopy. The receptor 5 showed highly selective 'Off-On' fluorescence signaling behavior for Zn(2+) ions in THF. Interestingly, the addition of H(2)PO(4)(-) ions to the [5-Zn] complex regulates the binding site for additional Zn(2+) ions and hence leads to a blue-shifted emission band.     

Hg2+-sensing system based on structures of complexes

The first example of a new Hg(2+)-sensing system based on the structures of complexes is reported. The system uses a combination of a new chiral bidentate ligand and CD spectroscopy. Significant CD spectral changes are observed when Hg(2+) is added, whereas no CD spectral changes are observed in the cases of Li(+), Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Rb(+), Ag(+), Cd(2+), La(3+), Gd(3+), and Pb(2+).     

2,1,3-Benzoxadiazole-based selective chromogenic chemosensor for rapid naked-eye detection of Hg2+ and Cu2+

We report a simple twisted intramolecular charge transfer (TICT) chromogenic chemosensor for rapid and selective detection of Hg(2+) and Cu(2+). The sensor was composed of an electron-acceptor 4-fluoro moiety and an electron-donor 7-mercapto-2,1,3-benzoxadiazole species where the S together with the 1-N provided the soft binding unit. Upon Hg(2+) and Cu(2+) complexation, remarkable but different absorbance spectra shifts were obtained in CH(3)CN-H(2)O mixed buffer solution at pH 7.6, which can be easily used for naked-eye detection. The sensor formed a stable 2:1 complex with Cu(2+), and both 2:1 and 3:1 complexes with Hg(2+). While alkali-, alkaline earth- and other heavy and transition metal ions such as Na(+), Mg(2+), Mn(2+), Co(2+), Ni(2+), Ag(+), Zn(2+), Pb(2+) and Cd(2+) did not cause any significant spectral changes of the sensor. This finding is not only a supplement to the detecting methods for Hg(2+) and Cu(2+), but also adds new merits to the chemistry of 4,7-substituted 2,1,3-benzoxadiazoles.     

Development and applications of fluorescent indicators for Mg2+ and Zn2+

In a study of the spectroscopic behavior of two Schiff base derivatives, salicylaldehyde salicylhydrazone (1) and salicylaldehyde benzoylhydrazone (2), Schiff base 1 has high selectivity for Zn(2+) ion not only in abiotic systems but also in living cells. The ion selectivity of 1 for Zn(2+) can be switched for Mg(2+) by swapping the solvent from ethanol-water to DMF (N,N-dimethylformamide)-water mixtures. Imine 2 is a good fluorescent probe for Zn(2+) in ethanol-water media. Many other ions tested, such as Li(+), Na(+), Al(3+), K(+), Ca(2+), Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Sn(2+), Ba(2+), Hg(2+), and Pb(2+), failed to induce any spectral change in various solvents. The selectivity mechanism of 1 and 2 for metal ions is based on a combinational effect of proton transfer (ESPT), C═N isomerization, and chelation-enhanced fluorescence (CHEF). The coordination modes of the complexes were investigated.     

Studies on metallochromic indicators-III Hematoxylin and hematein

The use of hematoxylin and hematein as metallochromic indicators in direct EDTA titration of Zr(4+), Th(4+), Bi(3+), VO(+), Ga(3+), In(3+), Al(3+), Pb(+), Zn(2+), Mn(2+), Cd(2+), Cu(2+), Ni(2+), Co(2+), Mg(2+), and a few rare earths is described. Aluminium is titrated directly in presence of acetate buffer, lactic or glycoliic acid being used as auxiliary complexing agent. Mixtures of two metal ions can be titrated if one is Bi(3+) and the other Al(3+), Pb(2+), Zn(2+), Cu(2+), Cd(2+), La(3+), Ce(3+), Pr(3+), Nd(3+), Sm(3+), Gd(3+) or Er(3+). Aluminium alloys can be analysed via EDTA titrations, with these indicators.