Development of a stepwise [3 + 3] annelation to functionalized piperidines

[reaction: see text] A stepwise formal [3 + 3] cycloaddition sequence via a Grignard addition-cyclization reaction leads to a much improved piperidine synthesis. This methodology provides improved flexibility in both the aziridine substrate and TMM equivalent.     

Synthesis of thienothiopyranthiones by a new molecular rearrangement

On heating with alkynes, the readily prepared 1,3-dithioles 3 undergo a new cycloaddition reaction and an unprecedented molecular rearrangement with loss of chlorine to give the first 7H-thieno[2,3-c]thiopyran-7-thiones 4 and 4H-thieno[3,2-c]thiopyran-4-thiones 5 whose structures were confirmed by X-ray diffraction. Unexpectedly, the different alkynes used to form 3 and to convert it into 4 and 5 were incorporated regiospecifically into the thiophene and thiopyran rings, respectively. [reaction: see text]     

Hetero [6+3] cycloaddition of fulvenes with N-alkylidene glycine esters: a facile synthesis of the delavayine and incarvillateine framework

[reaction: see text] In contrast to the [3+2] or [4+3] cycloaddition of N-metalated azomethine ylides and various alkenes, N-benzylidene glycine ethyl ester reacts with fulvenes to give the hetero [6+3] cycloaddition adducts with high stereoselectivity, constituting an efficient and novel route to [2]pyrindines.     

Stereoselective syntheses of highly functionalized bicyclo[3.1.0]hexanes: a general methodology for the synthesis of potent and selective mGluR2/3 agonists

[Chemical reaction: See text] A Et3Al mediated intramolecular epoxide opening, cyclopropanation reaction is described. The transformation provided highly functionalized bicyclo[3.1.0]hexane systems in high efficiency and with perfect H or F endo selectivity. Application of this reaction to the synthesis of mGluR2/3 agonist 1 (43% overall yield) and a few intermediates suitable for the synthesis of other bicyclo[3.1.0]hexane mGluR2/3 agonists is discussed.     

Intermolecular Pauson-Khand reactions of cyclopropene: a general synthesis of cyclopentanones

[reaction: see text] The Pauson-Khand reaction of cyclopropene with a variety of terminal alkynes has been studied. The best reaction conditions involve NMO activation in CH(2)Cl(2) at -35 degrees C. In this way, 3-substituted-bicyclo[3.1.0]hex-3-en-2-ones have been obtained in good to excellent yields. As a synthetic application, several types of substituted cyclopentenones have been prepared from these cycloadducts by protocols involving conjugate addition and reductive ring opening.     

Unprecedented conversion of triethylamine and disulfur dichloride into a thienopentathiepin and a heptathiocane

[reaction: see text] In a remarkable cascade reaction, triethylamine is converted into the thienopentathiepin 2a and the heptathiocane 3a by a preequilibrated solution of disulfur dichloride and DABCO in chloroform.     

Stereoselective synthesis of highly functionalized 1,5-oxa-bridged cyclooctenes via a 3-oxidopyrylium-cyclopropenone acetal cycloaddition [corrected

[reaction: see text] A [5C+2C] oxidopyrylium-cyclopropenone acetal cycloaddition followed by ring opening of the cyclopropane unit of the resulting adduct leads to highly substituted 1,5-oxa-bridged cyclooctenes containing up to four stereocenters. The protocol formally constitutes a [5C+3C] annulation process.     

Electrophilic substitution of C60F18 into phenols: HF elimination between OH and a 1,3-shifted fluorine giving benzofurano[2',3':10,26]hexadecafluro[60]fullerene and derivatives

The reaction of C60F18 with phenol, 2-naphthol and quinol in the presence of ferric chloride leads to initial electrophilic substitution (aryldefluorination). This occurs at both ortho and para positions for phenol, at the ortho position for quinol, and at the relatively hindered but most reactive 1-position for 2-naphthol. It is followed, where sterically favourable, by HF loss either between the OH group and F (rendered adjacent as a result of a 1,3-shift) or to attack of the OH group at an adjacent double bond with loss of a beta-fluorine, giving benzofurano[2',3':10,26]hexadecafluoro[60]fullerene derivatives. The reaction is accompanied by some complete defluorination leading, in reaction with phenol and with 2-naphthol, to the formation of benzofurano[2',3':1,2][60]fullerene and naphtho[2,1:b]furano[d:1,2][60]-fullerene, respectively. The mechanism of base-catalysed reaction of phenols with C60Cl6 is re-evaluated.     

Total synthesis of (+)-cocaine via desymmetrization of a meso-dialdehyde

[reaction: see text] The total synthesis of (+)-cocaine is described. An extension of the recently reported proline catalyzed intramolecular enol-exo-aldol reaction to a meso-dialdehyde provided the tropane ring skeleton directly with good enantiomeric excess. The meso-dialdehyde was prepared using a 2-azaallyllithium [3 + 2] cycloaddition to generate a cis-2,5-disubstituted pyrrolidine. Overall, the synthesis proceeded in 6.5% yield and 86% ee over 14 linear steps starting from commercially available 3-benzyloxy-1-propanol.     

Palladium-catalyzed bisdiene carbocyclizations: a facile [3 + 2] cycloaddition reaction mode

[reaction: see text] In contrast to alkyl-substituted bisdienes, aryl-substituted substrates undergo surprisingly facile palladium-catalyzed carbocyclization via a novel [3 + 2] cycloaddition mode.     

New approaches to the synthesis of functionally substituted pyrido[3′,2′:4,5]thieno[3,2-b]pyridines and the structure of the products obtained

Substituted pyrido,[3',2':4,5]thieno[3,2-b]pyndines were obtained by the reaction of 3-amino-2-benzoylthieno [2,3-b]pyridines with malononitrile and the reaction of 3-cyanopyridine-2(IH)-thiones with 2-aryl-3-bromo-I,I-dicyanopropene. 2-Amino-4-(4-bromophenyl)-7, 9-dimethyl-3-cyanopyrido [3',2':4,5]thieno[3, 2-b]-pyridine was used for the synthesis of a derivative of pyrido[3",2":4', 5']thieno[2',3':5,6]pyrido[2,3-d]-pyrimidine. The structure of these compounds was confirmed by spectral data and x-ray diffraction structural analysis.Deceased.     

New mode of coordination for the dinitrogen ligand: formation, bonding, and reactivity of a tantalum complex with a bridging N(2) unit that is both side-on and end-on.

The reaction of a mixture of 1 equiv of PhPH(2) and 2 equiv of PhNHSiMe(2)CH(2)Cl with 4 equiv of Bu(n)Li followed by the addition of THF generates the lithiated ligand precursor [NPN]Li(2).(THF)(2) (where [NPN] = PhP(CH(2)SiMe(2)NPh)(2)). The reaction of [NPN]Li(2).(THF)(2) with TaMe(3)Cl(2) produces [NPN]TaMe(3), which reacts under H(2) to yield the diamagnetic dinuclear Ta(IV) tetrahydride ([NPN]Ta)(2)(mu-H)(4). This hydride reacts with N(2) with the loss of H(2) to produce ([NPN]Ta(mu-H))(2)(mu-eta(1):eta(2)-N(2)), which was characterized both in solution and in the solid state, and contains strongly activated N(2) bound in the unprecedented side-on end-on dinuclear bonding mode. A density functional theory calculation on the model complex [(H(3)P)(H(2)N)(2)Ta(mu-H)](2)(mu-eta(1):eta(2)-N(2)) provides insight into the molecular orbital interactions involved in the side-on end-on bonding mode of dinitrogen. The reaction of ([NPN]Ta(mu-H))(2)(mu-eta(1):eta(2)-N(2)) with propene generates the end-on bound dinitrogen complex ([NPN]Ta(CH(2)CH(2)CH(3)))(2)(mu-eta(1):eta(1)-N(2)), and the reaction of [NPN]Li(2).(THF)(2) with NbCl(3)(DME) generates the end-on bound dinitrogen complex ([NPN]NbCl)(2)(mu-eta(1):eta(1)-N(2)). These two end-on bound dinitrogen complexes provide evidence that the bridging hydride ligands are responsible for the unusual bonding mode of dinitrogen in ([NPN]Ta(mu-H))(2)(mu-eta(1):eta(2)-N(2)). The dinitrogen moiety in the side-on end-on mode is amenable to functionalization; the reaction of ([NPN]Ta(mu-H))(2)(mu-eta(1):eta(2)-N(2)) with PhCH(2)Br results in C-N bond formation to yield [NPN]Ta(mu-eta(1):eta(2)-N(2)CH(2)Ph)(mu-H)(2)TaBr[NPN]. Nitrogen-15 NMR spectral data are provided for all the tantalum-dinitrogen complexes and derivatives described.     

Total synthesis of ent-dihydrocorynantheol by using a proline-catalyzed asymmetric addition reaction

[reaction: see text] 9-Tosyl-3,4-dihydro-beta-carboline reacted with 3-ethyl-3-buten-2-one in the presence of (S)-proline to give (3R,12bR)-3-ethyl-12-tosyl-3,4,6,7,8,9,10,11,12,12b-decahydro-1H-indolo[2,3-a]quinolizin-2-one in complete enantio- and diastereoselectivity. The compound thus obtained was readily transformed to ent-dihydrocorynantheol in three steps.     

Synthesis and characterization of a singlet delocalized 2,4-diimino-1,3-disilacyclobutanediyl and a silylenylsilaimine

The synthesis and characterization of a singlet delocalized 2,4-diimino-1,3-disilacyclobutanediyl, [LSi(μ-CNAr)(2)SiL] (2, L: PhC(NtBu)(2), Ar: 2,6-iPr(2) C(6) H(3)), and a silylenylsilaimine, [LSi(=NAr)-SiL] (3), are described. The reaction of three equivalents of the disilylene [LSi-SiL] (1) with two equivalents of ArN=C=NAr in toluene at room temperature for 12 h afforded [LSi(μ-CNAr)(2)SiL] (2) and [LSi(=NAr)-SiL] (3) in a ratio of 1:2. Compounds 2 and 3 have been characterized by NMR spectroscopy and X-ray crystallography. Compound 2 was also investigated by theoretical studies. The results show that compound 2 possesses singlet biradicaloid character with an extensive electronic delocalization throughout the Si(2)C(2) four-membered ring and exocyclic C=N bonds. Compound 3 is the first example of a silylenylsilaimine, which contains a low-valent silicon center and a silaimine substituent. A mechanism for the formation of 2 and 3 is also proposed.     

Three distinct reactions of 3,4-dihydroisoquinolines with azlactones: novel synthesis of imidazoloisoquinolin-3-ones, benzo[a]quinolizin-4-ones, and benzo[d]azocin-4-ones

A facile and direct synthetic entry to tricyclic imidazoloisoquinolin-3-ones and benzo[a]quinolizin-4-ones is reported based on the ring annulation of 1-unsubstituted and 1-substituted dihydroisoquinolines with azlactones under neutral conditions in a one-step procedure. Bicyclic 2,3-dihydrobenzo[d]azocin-4-ones were also prepared using simple azlactone and 1-substituted dihydroisoquinolines in a one-pot reaction. [reaction: see text]     

Iron-catalyzed regio- and stereoselective ring opening of [2.2.1]- and [3.2.1]oxabicyclic alkenes with a Grignard reagent

[reaction: see text] Arylative and alkenylative ring-opening reactions of a [2.2.1]- or [3.2.1]oxabicyclic alkene with a Grignard reagent take place in the presence of a catalytic amount of iron(III) chloride and a stoichiometric amount of TMEDA to produce a highly substituted 3-cyclohexen-1-ol or 3-cyclohepten-1-ol in good yield with high regio- and stereoselectivity.     

Thermolysis of isomigrastatin and its congeners via [3,3]-sigmatropic rearrangement: a new route to the synthesis of migrastatin and its analogues

Thermolysis of isomigrastatin (1) under neat heating conditions afforded migrastatin (1a). The reaction is proposed to proceed via a concerted [3,3]-sigmatropic rearrangement by which ring expansion is achieved regio- and enantiospecifically. The general applicability of this reaction was demonstrated with six additional isomigrastatin congeners (3-8), providing a new route to the synthesis of migrastatin analogues (3a-8a). [reaction: see text]     

Oxazoline N-oxide-mediated [2+3] cycloadditions. Application to a synthesis of (-)-tetrahydrolipstatin

[reaction: see text] A [2+3] cycloaddition of camphor-derived oxazoline N-oxide to alpha,beta-unsaturated ester afforded adduct 8. Tetrahydrolipstatin 1 was prepared from this compound in a nine-step sequence of reactions.     

Traceless solid-phase synthesis of heterosteroid framework

[reaction: see text]A traceless solid-phase synthesis of cyclopenta[c]-4H-chromen-8-ol, benzo[d]cyclopenta[e]-3H-3-azin-8-ol, and other 11-heterosteroids via the fulvene hetero [6 + 3] cycloaddition is described.     

Preparation of 13C4-6-methyl anthranilic ester via a Diels-Alder-type process. an experimental and theoretical study to characterize an unexpected isotope exchange

Buta-2,3-dienoate reacts with vinyl ketenimine to give the corresponding substituted aniline through a Diels-Alder cycloaddition. Besides the expected Diels-Alder adduct 3a, the aniline 3b was also obtained in a ratio of 91:9. The observed (13)C exchange is explained on the basis of a reversible [2 + 2] cycloaddition competing with the [4 + 2] process. This is supported by B3LYP DFT computations, as a stepwise pathway lies very close in energy to the [4 + 2] concerted one. [reaction: see text]