Structure of an Extracellular Polysaccharide from a Strain of Lactic Acid Bacteria

A new extracellular polysaccharide (EPS-I) isolated and purified from Z222, a strain of Lactic acid bacteria has been investigated. Sugar composition analysis, methylation analysis and ^1H NMR and ^13C NMR spectroscopy reveal that the EPS-I is composed of a pentasaccharide repeating unit. The sequence of sugar residue was determined by using two-dlmensional NMR spectroscopy, including heteronudear multiple-bond correlation(HMBC) and nuclear overhauser effect spectroscopy (NOESY).     

Study on the Novel Dicyanate Ester Resin Containing Naphthalene Unit

The novel dicyanate ester resin containing naphthalene unit (DNCY) was synthesized,and characterized by FT-IR,^1H-NMR,^13C-NMR and elemental analysis (EA),The thermal properties of DNCY resin was studied by thermal degradation analysis at a heating rate of 10℃/min^-1 in N2 and air,The DNCY rdsin exhibited better thermal and thrmal-oxidative stability than bisphenol A dicyanate (BACY)resin.     

SYNTHESIS AND ANIONIC POLYMERIZATION OF 2-METHYL-2-METHOXY CARBONYL-5-METHYLENE-1, 3-DIOXOLAN-4-ONE

A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,~(13)C NMR, INEPT (Intensive Nuclei Enhanced by Polarization Transfer) technique, IR andelemental analysis. Anionic polymerization of the monomer was carried out in anhydrous THF at.70℃, and 9-fluorenyllithium was used as initiator. The polymer strucure was determined byIR, NMR and elemental analysis. Molecular weight of the polymer was estimated by viscositymeasurement in DMSO at 30℃.     

Synthesis and Characterization of Zeolite Hexanediamine-Theta-1

The synthesis of zeolite HXDM-Theta-1(HXDM = hexanediamine) from the reaction mixture HXDM-Al2O3-SiO2-HF-H2O is described. The formation of HXDM-Theta-1 is favoured at 150℃, and a mixture of Theta-1 and ZSM-5 is obtained at a higher temperature. The asynthesized Theta-1 was characterized by means of scanning electron micrography, thermal analysis and 13C MAS NMR techniques. Keywords Theta-1, Hydrothermal crystallization, Hexanediamine template, Thermal analysis, 13C MAS NMR     

Synthesis and Enantioselective Discrimination of Chiral Fluorescence Receptors Bearing Amino Acid Units

Two chiral fluorescence receptors （1, 2） were synthesized, and their structures were characterized by IR, ^1H NMR, ^13C NMR, mass spectra and elemental analysis. The chiral recognition of receptors was studied by ^1H NMR and fluorescence spectra. The results demonstrate that receptors and dibenzoyl tartrate anion formed a 1 ： 1 complex. The receptor 1 exhibited a good enantioselective recognition ability toward the enantiomers of dibenzoyl tartrate anion.     

12-Tungstophosphates I-mmobilized on Chemically Modified Mesoporous Silica SBA-15

A functionalized material. PW/SBA-15m, was prepared successfully in diluted H2SO4 aqueous solutions by immobilizing 12-tungstophosphates on chemically modified mesoporous silica SBA-15 and characterized by elemental analysis, FTIR, ^31p MAS NMR, XRD and TEM. The results indicate that the framework of SBA-15 and the Keggin structure of PW12O40^3- were retained, and that 23%-33% (mass fraction) of PW12O40^3- wasimmobilized; the PW12O40^3- anions were finely dispersed on the pore wall of SBA-15. Having been leached in ethanol at 60 ℃ for 7 h, the loss of PW12O40^3- anions was not found.     

NMR Analysis to Identify Biuret Groups in Common Polyureas

Polyureas(PU) are well known as a class of high impact engineering materials, and widely used also in emerging advanced applications. As a general observation, most of them are only soluble in a very limited number of highly protonic solvents, which makes their chemical structure analysis a great challenge. Besides the presence of abundant hydrogen bonding, the poor solubility of PU in common organic solvents is often ascribed to the formation of biuret crosslinking in their molecular chains. To clarify the presence of biuret groups in PU has been of great interest. To this end, two samples, based on hexamethylene diisocyanate(HDI) and toluene diisocyanate(TDI) respectively, were synthesized by precipitation polymerization of each of these diisocyanates in water-acetone at30 °C. Their chemical structures were analyzed by high resolution magic angle spinning(HR-MAS) NMR, and through comparison of their NMR spectra with those of specially prepared biuret-containing polyurea oligomers, it was concluded that biuret group was absent in all the PU prepared at 30 °C. In addition, this NMR analysis was also applied to a PU obtained by copolymerization of TDI with ethylene diamine(EDA) and water at 65 °C in EDA aqueous solution. It was confirmed that biuret unit was also absent in this PU and that EDA was more active than water towards TDI. The presence of EDA was crucial to the formation of uniform PU microspheres. This study provides therefore a reliable method for the analysis of PU chemical structure.     

Synthesis, Crystal Structure and Biological Activities of N＇ - （ 4-Methoxybenzylidene ） -2- （ 1H-1, 2,4- triazol-1-yl） acetohydrazide

The title compound, N‘-( 4-methoxybenzylidene ) -2-( IH-1, 2,4-triazol-1-yl ) acetohydrazide, was synthesized and its structure was confirmed by means of IR, MS,^1H NMR and elemental analysis. The single crystal structure of the title compound was determined by X-ray diffraction. The preliminary biological test shows that the synthesized compound has a low antifungal activity.     

Preparation and Characterization of Ordered Ladder Like Polyphenylsilsesquioxane via Two-step Sol-gel Method

Soluble and ordered ladder like polyphenylsilsesquioxane was synthesized by a two-step sol-gel method including hydrolysis and polycondensation. The procedure was monitored by Fourier transform infrared spectroscopy and the presence of the ladder like structure was confirmed by X-ray techniques. 29Si NMR analysis shows a very narrow half peak width(δ<4) at δ -78.866 of the main chain unit C6H5SiO3/2 of polyphenylsilsesquioxane, indicating that the polyphenylsilsesquioxane has ordered ladder like structures ...     

Synthesis of Polyphosphonates Containing 5—Flouro—N^1—furanyl—N^3—glyceroalkyl—uracil and Formyl Groups

A series of novel polyphosphonates containing 5-flouro-N^1-furanyl-N^3-glyceroalkyl-uracil and formyl groups was synthesized by the condensation of 3-(ω-(1′-furanyl-5-flourouracil-3-yl) alkoxy)-1,2-dihydroxy propane with phosphonyl dichloride. The products were characterized by IR,^1H NMR,^31P NMR, M,and elemental analysis. The results of bioassay show that compound 8a possesses potential anticancer activity.     

阻燃剂二(5,5-二溴甲基-1,3,2-二氧六环磷酰)双酚A的合成

近年来,针对高分子材料易燃进行阻燃化处理,赋予其难燃性和抑烟性,对于有效阻止材料火灾事故发生和抑制火焰传播具有重要意义~([1-2]).磷、溴作为两类重要的阻燃元素,具有各自相应的阻燃机理,能够通过凝聚相和气相共同发挥阻燃作用,降低材料的燃烧性能.     

双酚芴双胺型苯并嗯嗪树脂的合成、结构及热性能

以9-芴酮、苯酚为原料,以质量分数为98%的浓硫酸为催化剂,2-巯基丙酸为助催化剂,合成了双酚芴[9,9-双(4-羟苯基)芴],再用其与乙二胺和多聚甲醛反应,合成了线性双酚芴双胺型苯并噁嗪树脂(BF-eda树脂).采用FTIR,'H NME和<'13>C NMR等分析手段对双酚芴和BF-eda树脂的化学结构进行了表征;...     

含1,2-亚乙基单元的双酚A聚碳酸酯非光气法合成和表征

以双酚A(BPA),碳酸乙二酯(EC)和碳酸二甲酯(DMC)为原料,制备双酚A二元醇(Ⅰ)和双酚A碳酸酯(Ⅱ),并用红外光谱与核磁共振波谱对其结构进行表征.通过Ⅰ与Ⅱ的共缩聚反应及Ⅱ的自聚实现了主链中含有—CH2CH2—单元的双酚A型聚碳酸酯(PC)的非光气法合成,用凝胶渗透色谱法(GPC)和TGA-DSC对PC的分子量和热性质进行分析.结果表明,Ⅱ在240℃自聚6h后产物的Mn可达17.6×103,主链中—CH2CH2—单元的引入,可以降低聚合物的Tg,提高其结晶性,所得聚合物具有良好的热稳定性.     

High-density storage of H2 in microporous crystalline silica at ambient conditions

Molecular hydrogen was encapsulated in the cages of clathrasil decadodecasil 3R (DD3R) during the hydrothermal synthesis of this microporous silicate. The crystalline structure of DD3R facilitates high-density hydrogen storage at ambient conditions. Prompt gamma activation analysis (PGAA) revealed that on average about one molecule of H2 is trapped in each (5(12)) cage of DD3R. The presence of molecular hydrogen inside the DD3R framework was confirmed by solid-state 1H NMR spectroscopy. Temperature-programmed decomposition (TPD) in combination with mass spectrometry showed that the encapsulated hydrogen is released upon decomposition of the clathrasil structure. This release can be promoted by the presence of water.     

亚砜还原法合成聚苯醚硫醚的结构与性能研究

以氟苯和氯化亚砜反应合成了4,4’-二氟二苯亚砜,并将其与4,4’二羟基二苯硫醚在N-甲基吡咯烷酮溶剂中进行亲核取代反应合成了聚苯醚硫醚醚亚砜,用乙二酰氯/四丁基碘化铵还原该亚砜聚合物制备了聚苯醚硫醚。用红外光谱和核磁共振谱对合成单体的结构进行了确认,同时对聚合物进行了红外光谱、核磁共振、元素分析、X射线光电子能谱、X射线衍射、DSC分析、TG/DTG以及溶解性测试。结果表明聚苯醚硫醚样品具有氧醚和硫醚交替的线性结构,特性粘度为0.55 dL/g的PPSE熔点达236℃,在氮气条件下,样品起始分解温度和最大分解速率处温度分别为359℃和514℃,在700℃时的重量保留率为43.3%,且在加热条件下能溶解于N-甲基吡咯烷酮(NMP)、二甲基乙酰胺(DMAc)、二甲基甲酰胺(DMF)等极性有机溶剂中。     

新型磷-氮有机金属阻燃剂的合成及其热稳定性

以γ-氨丙基三乙氧基硅烷(1)和二苯基氯化膦(2)为原料,经取代反应制得N-(二苯基膦基)-1,1-二苯基-N-［3-(三乙氧基甲硅烷)丙基］膦氮配体(3); 3与六水合氯化镍(4)反应合成了一种新型的磷-氮有机金属阻燃剂(5),其结构经¹H NMR, ³¹P NMR和FT-IR表征。研究了物料比［r=n(2) : n(1)］、溶剂、反应时间和反应温度对3收率的影响。结果表明：在最佳反应条件［二氯甲烷为溶剂,1 19 mmol, r=2.3,于25 ℃反应14 h］下,3收率89.5%。 TGA测试结果表明：5的初始分解温度为252 ℃, 700 ℃残炭为31.9%。     

九节菖蒲化学成份研究(Ⅱ)

前文报导从中药九节菖蒲(AnemonealtaicaC.A.May)中分离鉴定了六种结晶性化合物,本文继续报导晶Ⅶ的结构测定工作。     

新型P－N－Si无卤阻燃剂的合成及其在棉纤维中的应用

以二氯磷酸苯酯(1)和γ-氨丙基三乙氧基硅烷(2)为原料,合成了一种新型的P－N－Si三元无卤阻燃剂--苯氧基-双-(三乙氧基硅丙基)磷酰胺(3),其结构经¹H NMR, ³¹P NMR和FT-IR表征。研究了溶剂,反应温度,反应时间,投料比r［n(2) : n(1)］和缚酸剂对3产率的影响。结果表明:在最佳合成条件［THF为溶剂,三乙胺为缚酸剂,1 8 mmol, r=2.4,于40 ℃反应6 h］下, 3的产率为88.2%。利用TGA测试了3的阻燃性能。结果表明：3的初始分解温度为150 ℃, 600 ℃残炭为14.6%。3在棉纤维(c)中的添加量为15%(质量百分数,即c-3¹⁵)时,600 ℃残炭为33.4%,高于c(7.6%)。     

衣康酸对聚丙烯腈原丝结构和性能的影响

控制单体配比 ,采用丙烯腈 (AN)与衣康酸 (IA)自由基溶液共聚 ,以偶氮二异丁腈为引发剂在溶剂二甲基亚砜中合成了聚丙烯腈原丝纺丝溶液 ,并纺制了碳纤维前驱体聚丙烯腈原丝 .通过元素分析、IR、DSC、13 C NMR等手段 ,讨论了共聚单体IA对共聚反应及聚丙烯腈原丝结构和性能的影响 .共聚反应时 ,共聚单体IA的加入量控制在AN/IA =98/2 (W/W )较合适 .利用IR谱 ,可定量分析IA在共聚中的摩尔分数 .经13 C NMR分析 ,随着共聚单体IR在共聚物中的摩尔分数的增加 ,共聚物的全同规整度增加 ,达到一定值后又呈下降趋势 .共聚单体IA能在较低温度时引发聚丙烯腈原丝的氧化、环化放热反应 ,且能减缓放热效应 .