纳米流控能量吸收耗散系统

基于纳米流控行为设计的新一代能量吸收耗散系统(nanofluidic en-ergy absorption system,NEAS)将会比传统吸能材料具有更高的能量吸收密度,而且还可以重复使用,特别是在小体积应用环境下具有显著的优势.本文从实验和计算模拟两方面综述了目前关于NEAS能量吸收耗散行为的最新研究进展,其中实验研究主要包括准静态压缩和动态压缩测试,计算模拟研究主要是采用基于经验势的分于动力学模拟方法.通过准静态压缩实验,可以测量NEAS模型的载荷–位移关系曲线,从而获得NEAS模型的临界渗透压强,了解卸载后系统是否能够恢复到加载前的状态(即是否可以重复使用),井通过载荷–位移关系曲线下面积估算NEAS模型的吸能密度;通过动态压缩实验可以测量NEAS模型对脉冲载荷的缓冲保护作用,主要体现为降低脉冲载荷幅值和扩展脉冲宽度.计算模型研究可以明确给出NEAS对外载荷的微观响应,从而可以准确了解NEAS的能量吸收耗散机制以及吸能密度的主要影响因素.本研究可以帮助我们全面了解NEAS的研究进展,为NEAS的设计与优化提供重要指导.     

Dynamic crushing and energy absorption of regular,irregular and functionally graded cellular structures

The in-plane dynamic crushing of two dimensional honeycombs with both regular hexagonal and irregular arrangements was investigated using detailed finite element models. The energy absorption of honeycombs made of a linear elastic-perfectly plastic material with constant and functionally graded density were estimated up to large crushing strains. Our numerical simulations showed three distinct crushing modes for honeycombs with a constant relative density: quasi-static, transition and dynamic. Moreover, irregular cellular structures showed to have energy absorption similar to their counterpart regular honeycombs of same relative density and mass. To study the dynamic crushing of functionally graded cellular structures, a density gradient in the direction of crushing was introduced in the computational models by a gradual change of the cell wall thickness. Decreasing the relative density in the direction of crushing was shown to enhance the energy absorption of honeycombs at early stages of crushing. The study provides new insight into the behavior of engineered and biological cellular materials, and could be used to develop novel energy absorbent structures.     

多孔材料吸能行为对相对密度和冲击速度的依赖性

多孔材料是一种优异的吸能缓冲材料,但由于其变形模式的非单一性以及动态应力应变曲线的难获取性,其吸能行为对相对密度和冲击速度的依赖性关系还并不完全明朗。本文基于不需要提前作本构假定的波传播法,开展了多孔材料的吸能行为研究。采用多孔材料的细观有限元模型进行Taylor冲击虚拟实验,获取全场质点速度时程曲线,结合Lagrange分析法得到多孔材料的局部应力应变信息,进而探讨了动态吸能性能对材料相对密度和冲击速度的依赖性。研究结果表明多孔材料的吸能行为可依据变形模式分为三个阶段。在冲击模式下,多孔材料单位体积吸能与相对密度成线性增加关系,此时惯性起主导作用;在过渡模式下,惯性的主导作用减弱,单位体积吸能量的增加速率随相对密度的增加而减弱;在准静态模式下,多孔材料只能发生微小的变形,其吸能很少。本文进一步获得了区别于多孔材料准静态应力-应变曲线的动态应力-应变状态曲线,并考察了其与相对密度之间的关系。结果表明：随着相对密度的增加,多孔材料的动态压实应变将变小,而动态塑性平台应力将提高。     

弹性、弹塑性材料显式模拟计算中的准静态加载速度研究

摘 要：动力学显式算法采用时间积分原理,其较静力学隐式算法在强非线性问题中的适用性更广。为将此方法应用到岩土等非线性材料的计算中,考虑到显式算法中动能的影响会导致结果波动,分析动力学显式算法在模拟计算中的准静态加载速度的选取十分必要,如何在缩短模拟消耗时间与结果准确性之间寻求平衡是本文研究重点。研究中提出以加载-位移曲线的波动比来评价准静态计算效果,首先开展弹性材料的平面应变模拟试验以分析弹模、密度、泊松比、围压4个参数对准静态加载速度取值的影响,结果表明：弹模、泊松比、围压的增大会提高准静态加载速度;密度的增大则会减小准静态加载速度。通过对各影响因素与准静态加载速度的相关性分析给出了准静态加载速度取值的经验公式。最后,选取能够反映砂土复杂力学特性的弹塑性本构模型,开展其平面应变模拟试验,对比分析准静态加载速度经验公式在弹性材料与弹塑性材料中的适用性差异,并提出应用建议公式。     

Energy absorption behavior of stiffness optimized graded lattice structures fabricated by material extrusion

The objective of this study is to investigate the energy absorption performance of the graded lattice energy absorbers designed by a stiffness-based size optimization process under static loadings applied during the in-service conditions. The energy absorber geometry is modeled using three different lattice types, namely complex cubic, octet cubic, face- and body-centered cubic. The stiffness-based size optimization subjected to a static bending load is conducted to determine the optimal strut diameters which produced graded lattice structure designs. To investigate the energy absorption behavior of these graded lattice designs, the nonlinear dynamic explicit finite element analysis (FEA) is conducted under quasi-static compression for each design. The lattice designs are fabricated by a material extrusion technique using the polylactic acid material and the quasi-static uniaxial compression tests are conducted on the fabricated designs. The FEA results are found to be in good agreement with the experimental results. When compared with uniform counterparts, the presented graded lattices exhibit the improved energy absorption in response to uniaxial compression although their designs were derived from a stiffness-based size optimization with bending load.

     

圆柱薄壳的动相变屈曲行为

利用MTS809材料试验机对TiNi圆柱薄壳进行了轴向动渐进相变屈曲实验,对轴向冲击下处于伪弹性状态的TiNi合金柱壳的动相变屈曲行为进行了数值模拟研究。结果表明,不同的加载强度将会激发出柱壳不同的动屈曲响应模态。当冲击速度较高时,柱壳两端首先形成轴对称环形相变屈曲波纹,并产生应力平台;随着马氏体含量不断增加,环形相变屈曲波纹逐渐贯穿整个壳体,名义应力缓慢抬升;当名义应变超过一定阈值时,对称环形屈曲模态突变为非轴对称块状屈曲模态,名义应力大幅下降。撞击速度为40 m/s的算例（含10％随机缺陷）与S.Nemat-Nasser等的实验结果很好吻合,说明本文中计算模型、方法和结果的有效性经过了实验的考核。结果还表明,相变耗能是TiNi柱壳吸收冲击能量的主要机制,适合制作可重复使用的高效吸能元件,并给出了相应的理想厚径比。     

Experimental studies on thin-walled grooved tubes under axial compression

We study experimentally the axial crushing behavior and crashworthiness characteristics of thin-walled steel tubes containing annular grooves. The grooves determine the positions of the folds and control the buckling mode of deformation. In the present work we aim to improve the uniformity of the load-displacement behavior and to predict the energy absorption capacity of the tubes. Grooves are cut circumferentially and alternately inside and outside the tubes at predetermined intervals. Quasi-static axial crushing tests are performed with different groove distances. Photographs are taken during axial buckling and the specimens after crushing are sectioned axially to carry out the measurements. The deformation modes and load-displacement curves are described and energy absorption and mean post-buckling load are determined. The convolutions are achieved by folding in an axisymmetric concertina mode about the circumferential grooves. The results show that the load-displacement curve and energy absorbed by the axial crushing of tubes can be controlled by the introduction of grooves with different distances.     

重组竹顺纹冲击力学性能研究

重组竹是一种新型竹基复合材料,其力学性能优于落叶松等木材。为评价重组竹在动态加载下的顺纹抗冲击力学性能,以密度1.06 g/cm3、含水率8.52%、龄期3～5年的毛竹基重组竹为研究对象,通过准静态单轴压缩和循环加卸载以及动态加载实验,研究了重组竹加载变形过程、各项力学性能指标以及对应变率的敏感性。结果表明:重组竹顺纹压缩过程可以分为弹性变形和弹塑性变形阶段,破坏类型为延性破坏,其各项强度指标随应变率的提高而提高,动态增长因子与应变率之间呈现线性关系,斜率为0.0024;重组竹压缩过程中的应变比能与应变之间呈线性关系,且随应变率的增长而增大,证明其吸能能力随着应变率的增大而提高。实验结果证明,重组竹顺纹具有良好的抗冲击力学性能和显著的应变率效应。     

Analytical/experimental investigation of energy absorption in grid-stiffened composite structures under transverse loading

In this paper we summarize preliminary results from an analytical/experimental study of the energy absorption characteristics of grid-stiffened composite structures under transverse loading. Tests and quasi-static finite element analysis simulations were carried out for isogrid E-glass/polypropylene panels in three-point bending. The results of the tests and simulations show that these types of structures have excellent damage tolerance and that most of the energy absorption occurs beyond initial failure. It is also observed that even though the peak load is greater for loading on the skin side, the specific energy absorption and the range of displacements over which energy is absorbed are significantly better when the load is applied on the rib side.     

Kevlar层合板动静态侵彻贯穿特性的实验研究

本文以Kevlar/环氧树脂层合材料为对象,通过动静态侵彻实验,研究层合板的抗贯穿特性。利用MTS810材料试验机进行准静态侵彻实验,根据测得的加载载荷-位移曲线及靶板的破坏模式,分析了靶板的准静态侵彻行为。实验指出,准静态侵彻时层合板的整体弯曲变形是其主要吸能模式,织物铺层板的吸能量要高于无编织铺层板,表现出更好的抗侵彻性。采用7.62mm口径滑膛枪开展了初速为200～700m/s的弹道冲击实验,讨论了不同弹形弹丸侵彻靶板的效果以及不同铺设方式靶板的抗弹性能和破坏模式。通过与准静态侵彻实验结果的对比,发现靶板的抗侵彻性能和破坏模式与侵彻速度有明显关系。动态侵彻时层合板的破坏局域化,破坏模式多样化。弹形对侵彻效果的影响主要体现于接近弹道极限的低速段。     

梯度蜂窝面外动态压缩力学行为与吸能特性研究

蜂窝材料具有优异的抗冲击吸能特性。为进一步提高蜂窝材料的比吸能与压缩力效率,提出了一种几何参数或材料参数沿厚度方向梯度渐变的蜂窝材料模型,并针对六边形蜂窝构型研究了胞元壁厚和屈服强度梯度变化的蜂窝材料在面外动态压缩载荷下的力学行为与吸能特性。研究结果表明,通过调控梯度变化的指数,胞元壁厚或母体材料屈服强度的梯度设计均可有效降低初始峰值应力,并使蜂窝材料的比吸能和压缩力效率同时增大。研究结果可为蜂窝材料的防撞性优化设计提供新的思路。     

聚硅氧烷硅胶的黏超弹性力学行为研究

聚硅氧烷硅胶是一类以Si——O键为主链、硅原子上直接连接有机基团的无色透明高分子聚合物, 因其具有优异的超弹性性能而广泛应用于精密减震结构、柔性电子器件等领域. 在聚硅氧烷硅胶减震结构和柔性电子器件的设计中, 材料在大变形和动态加载下的黏超弹性力学行为的精确描述至关重要. 本文针对该问题进行了系统的研究:首先, 将该硅胶的超弹性和黏弹性行为进行解耦, 确定其黏超弹性本构方程的基本框架;其次, 基于单轴拉压、平面拉伸试验确定其准静态超弹性模型的各项参数;再次, 利用霍普金森压杆冲击试验确定其黏弹性模型的各项参数;在此基础上, 将超弹性和黏弹性模型合并为适用于大应变和大应变率的黏超弹性动态本构模型;最后, 利用落锤冲击试验对该硅胶薄片的冲击变形行为进行了研究, 并利用上述建立的动态本构模型对落锤冲击过程进行了有限元模拟. 结果表明:本文建立的黏超弹性本构模型可有效预测该硅胶在冲击载荷下的力学行为, 从而为聚硅氧烷硅胶减震结构和柔性电子器件的优化设计提供了理论和应用基础.      

Design of Inserts for Split-Hopkinson Pressure Bar Testing of Low Strain-to-Failure Materials

In the present study a new insert design is presented and validated to enable reliable dynamic mechanical characterization of low strain-to-failure materials using the Split-Hopkinson Pressure Bar (SHPB) apparatus. Finite element-based simulations are conducted to better understand the effects of stress concentrations on the dynamic behavior of LM-1, a Zr-based bulk metallic glass (BMG), using the conventional SHPB setup with cylindrical inserts, and two modified setups—one utilizing conical inserts and the other utilizing a “dogbone” shaped specimen. Based on the results of these computational experiments the ends of the dogbone specimen are replaced with high-strength maraging steel inserts. This new insert-specimen configuration is expected to prevent specimen failure outside the specimen gage section. Simulations are then performed to validate the new insert design. Moreover, high strain-rate uniaxial compression tests are conducted on LM-1 using the modified SHPB with the new inserts. An ultra-high-speed camera is employed to investigate the changes in failure behavior of the specimens. Additional experiments are conducted with strain gages directly attached to the gage section of the specimens to determine accurately their dynamic stress–strain behavior.     

一种基于电磁霍普金森杆的材料动态包辛格效应测试装置及方法

金属材料在复杂载荷条件下的动态力学行为研究一直备受关注,但受限于实验设备,金属材料的动态包辛格效应响应一直都难以获得。为了探究金属材料的包辛格效应与应变率效应之间的关系,本文中提出一种基于电磁霍普金森杆(electromagnetic split Hopkinson bar,ESHB) 的非同步加载实验技术,为测试金属材料在高应变率加载下的包辛格效应提供了一种有效的实验方法。本文中,首先介绍了非同步加载装置的主要特点,即可以用两列由脉冲发生器产生的应力波对受载试样进行连续的一次动态拉-压循环加载,且加载过程保证了应力波的一致性。分析了应力波对试样加载过程中的波传播历程,确保了加载过程的连续性。随后介绍了动态加载过程,数据处理方法和波形分离手段,并对动态加载过程进行应力平衡性分析,论证了实验装置的可靠性。最后采用该方法测试了5%预应变下6061铝合金动态压缩-动态拉伸的包辛格效应,并与准静态下的实验结果进行对比。实验结果表明,该材料单轴压缩没有明显的应变率效应,但其包辛格效应具有应变率依赖性,高应变率下材料的包辛格应力影响因子由0.07增大至0.17,具有显著的提升,这对传统意义上铝合金材料应变率不敏感的结论提出了挑战。     

泡沫材料准静态力学性能实验研究

利用INSTRON-1185型万能材料试验机在准静态加载环境下对不同密度的聚氨酯泡沫的抗压、抗拉及抗弯性能进行了较系统的实验研究,分析了聚氨酯泡沫材料的力学性能及吸能特性随表观密度的变化规律.研究表明,聚氨醋泡沫材料的杭压性能优于其杭拉性能,该材料具有良好的吸能特性,且其吸能特性随密度的增大而提高.     

Axial compression and energy absorption characteristics of high-strength thin-walled cylinders under impact load

Non-linear finite element software LS-DYNA is used to analyze the axial compression behavior and energy absorption of a high-strength thin-walled member under an impact load. To elucidate the effect of dynamic impact on the strain rate, the Cowper-Symonds equation is applied to analyze the plastic state of stress and the onset of dynamic yielding under different strain rates, such that the modeled deformation behavior of the member is consistent with the actual situation. Results for the thin-walled members made of mild steel and dual phase steel are compared. Assuming two different materials with equal sectional areas, an analysis confirms that the energy absorption of high-strength steel thin-walled component is better than the mild steel thin-walled component. Hence, thin-walled tubes made of high-strength steel are investigated using a series of analysis. The relationships between displacement and load, average load and energy absorption properties are obtained.     

Review on underwater sound absorption materials and mechanisms

随着我国加速实施海洋强国战略,对先进水下吸声材料的需求日益迫切.与空气吸声不同,水下的高静水压力和复杂的海洋环境对水下吸声材料提出了更为苛刻的要求.吸声问题的本质是如何将弹性能高效地转化为热能或其他形式能量.本文综述了主要以聚合物分子内摩擦机制及界面耗能机制为基础的传统水下吸声材料.传统水下吸声材料面临的主要是其在低频及高静水压力下吸声性能差的问题.这是因为：一方面受质量密度定律的限制,有限厚度的水下吸声材料无法有效吸收水中传来的低频声波;另一方面,在高静水压力下,弹性材料如高分子聚合物会变“硬”,从而大大降低了声波弹性能的转换效率.随着局域共振理论及超材料概念的提出,发展出了一系列新型水下吸声材料,为解决水下吸声材料遇到的难题提供了新思路.局域共振理论的特点是可以用小尺度结构控制长波声波的传播,从而可以解决低频吸声问题.本文重点综述了局域共振理论,以及由此发展出的声子木堆、声子玻璃等新型水下吸声材料.声子玻璃材料在局域共振理论基础上,通过引入多孔金属骨架结构提高了材料的抗压性能,从而解决了高静水压力下材料吸声性能变差的问题.本文最后对水下吸声材料未来发展方向进行了展望.     

泡沫铝填充金属薄壁圆管侧向压缩的实验和理论

利用实验研究与理论分析相结合方法研究了泡沫铝填充金属薄壁圆管在准静态侧向压缩下的力学响应。基于能量法,建立了泡沫铝填充圆管和金属薄壁圆管在侧向均匀压缩时的瞬时侧向力、平均侧向力和总吸能的理论公式。对泡沫铝填充管与金属薄壁圆管进行了准静态侧向压缩实验,并且将实验结果与理论公式进行了对比,结果表明理论预测值与实验结果吻合较好。基于建立的理论分析模型,研究了管的几何尺寸以及泡沫铝材料的密度对结构的瞬时侧向力、平均侧向力、总吸能和比吸能的影响。结果表明,在准静态侧向压缩下,泡沫铝填充管的总吸能大于对应的金属薄壁圆管;泡沫铝填充管的侧向压缩力和总吸能随管长度、壁厚和直径的增加而增大;当填充材料泡沫铝密度增大时,填充管的总吸能与侧向压缩力均增加。     

Deflections of a rubber membrane

This paper deals with the problem of the transverse deflection of a natural rubber membrane that is fixed along a circular boundary. Uniaxial experiments were performed in order to characterize the constitutive behaviour of the rubber material in terms of several constitutive models available in the literature. These constitutive models were used to develop computational estimates for the quasi-static load-displacement response of a rigid spherical indentor that deflects the rubber membrane in a controlled fashion and to determine the deflected shape of the membrane at specified load levels. Both axisymmetric and asymmetric deflections of the rubber membrane were investigated. The paper provides a comparison of the experimental results for the membrane deflections with results derived from computational simulations.     

低应变率下硅铝质泡沫陶瓷复合材料的力学性能研究

以泡沫陶瓷复合材料在防护工程中的应用为背景,利用MTS(Material Test System,材料试验机)对该型材料进行了准静态压缩实验。得到了应变率在10-5~10-3s-1范围内的应力应变曲线,并对实验结果进行了理论分析和数值模拟。研究表明,泡沫陶瓷复合材料的力学性能在准静态一维应力压缩条件下显示出明显的应变率效应,同时其应力应变曲线可用一种经验的脆性材料本构模型进行较好地拟合。而在一维应变压缩条件下,材料的应力应变曲线则显示出明显的三段式特征:弹性段、平台段和密实段,同时材料的吸能幅值随着应变率的增大而增加。