Synthesis and thiol–ene photopolymerization of allyl‐ether functionalized dendrimers

Well‐defined, allyl‐ether functional, first‐generation dendrimers have been synthesized. The convergent growth approach was utilized, using the anhydride of the allyl‐ether terminated building block. Three different core moieties were used: trimethylolpropane, trisphenol, and ditrimethylolpropane. The coupling reactions proceeded in good yields and all compounds were characterized by NMR, MALDI‐TOF, and SEC. The allyl‐terminated dendrimers were crosslinked by thiol–ene chemistry, using a multifunctional thiol, TriThiol, to give clear and smooth films. The photopolymerization was conducted in the presence of a photoinitiator, Irgacure 651, and no traces of either allyl‐ether groups or thiols were observed by FT‐Raman after cure. All crosslinked films were characterized with respect to mechanical (DMA) and thermal (DSC) properties. It was found that homogeneous networks were formed and that the core functionality and structure had little effect on the network properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1339–1348, 2008     

Kinetics of thiol–ene and thiol–acrylate photopolymerizations with real‐time fourier transform infrared

We used real‐time Fourier transform infrared to monitor the conversion of both thiol and ene (vinyl) functional groups independently during photoinduced thiol–ene photopolymerizations. From these results, the stoichiometry of various thiol–ene and thiol–acrylate polymerizations was determined. For thiol–ene polymerizations, the conversion of ene functional groups was up to 15% greater than the conversion of thiol functional groups. For stoichiometric thiol–acrylate polymerizations, the conversion of the acrylate functional groups was roughly twice that of the thiol functional groups. With kinetic expressions for thiol–acrylate polymerizations, the acrylate propagation kinetic constant was found to be 1.5 times greater than the rate constant for hydrogen abstraction from the thiol. Conversions of thiol–acrylate systems of various initial stoichiometries were successfully predicted with this ratio of propagation and chain‐transfer kinetic constants. Thiol–acrylate systems with different initial stoichiometries exhibited diverse network properties. Thiol–ene systems were initiated with benzophenone and 2,2‐dimethoxy‐2‐phenylacetophenone as initiators and were also polymerized without a photoinitiator. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3311–3319, 2001     

Synthesis of allyl end‐block functionalized poly(ε‐caprolactone)s and their facile post‐functionalization via thiol–ene reaction

A simple and facile strategy for the functionalization of commercial poly(ε‐caprolactone) diols (PCLs) with pendant functionalities at the polymer chain termini is described. Well‐defined allyl‐functionalized PCLs with varying numbers of allyl end‐block side‐groups were synthesized by cationic ring‐opening polymerization of allyl glycidyl ether using PCL diols as macroinitiators. Further functionalization of the allyl‐functionalized PCLs was realized via the UV‐initiated radical addition of a furan‐functionalized thiol to the pendant allyl functional groups, showing the suitability for post‐modification of the PCL materials. Changes in polymer structure as a result of varying the number of pendant functional units at the PCL chain termini were demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 928–939     

Photopolymerization of ternary thiol–ene/acrylate systems: Film and network properties

Photocurable, ternary‐component mixtures of a 1:1 molar multifunctional thiol–ene (trithiol and triallyl ether) blend and a 16‐functional acrylate based monomer have been photopolymerized, and the final film properties of the ternary crosslinked networks have been measured. The photopolymerization kinetics, morphology, and mechanical and physical properties of the films have been investigated with real‐time infrared, atomic force microscopy, and dynamic mechanical analysis. The photopolymerization process is a combination of acrylate homopolymerization and copolymerizations of thiol with allyl ether and acrylate functionalities. The tan δ peaks of the photopolymerized ternary systems are relatively narrow and tunable over a large temperature range. The morphology is characterized by a distinct phase‐separated nanostructure. The photocured thiol–ene/acrylate ternary systems can be made to exhibit good mechanical properties with enhanced energy absorption at room temperature by the appropriate selection of each component concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 822–829, 2007.     

New fluorinated acrylic monomers for the surface modification of UV‐curable systems

New fluorinated acrylates were synthesized and used as modifying additives for acrylic UV‐curable systems. Their chemical structure is: C_nF_2n+1 R—OCO—CHCH₂, where the linear perfluorinated chain contains from 4 to 10 carbon atoms, while R is a linear alkyl group containing or not a thioether group. Notwithstanding their very low concentration, the fluorinated monomers caused a dramatic change of the surface properties of the films, without changing their curing conditions and their bulk properties. X‐ray photoelectron spectroscopy measurements showed that the monomers were able to concentrate selectively on the surfaces of the films, depending on their chemical structure and on the kind of substrate employed. The synthesis of the fluorinated monomers and the relationship between their chemical structure and the final surface properties of the UV‐cured films will be discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 77–87, 1999     

Utilizing thiol–ene chemistry for crosslinked nickel cation‐based anion exchange membranes

Metal cation‐based anion exchange membranes (AEMs) are a unique class of materials that have shown potential to be highly stable AEMs with competitive conductivities. Here, we expand upon previous work to report the synthesis of crosslinked nickel cation‐based AEMs formed using the thiol–ene reaction. These thiol–ene‐based samples were first characterized for their morphology, both with and without nickel cations, where the nickel‐containing membranes demonstrated a disordered scattering peak characteristic of ionic clusters. The samples were then characterized for their water uptake, chemical and mechanical stability, and conductivity. They showed a combination of high water content and extreme brittleness, which also resulted in fairly low conductivity. The brittleness resulted from large water swelling as well as the need for each nickel cation to act as a crosslinker, necessary with the current nickel‐coordination chemistry. Therefore, increasing the ion exchange capacity (IEC) for these types of AEMs, important for enhancing conductivity, also increased the crosslink density. The low conductivity and brittleness seen in this work demonstrated the need to develop non‐crosslinking metal‐complexes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 328–339     

Photoinduced thiol–ene crosslinking of globalide/ε‐caprolactone copolymers: Curing performance and resulting thermoset properties

The increasing demand for bioderived polymers led us to investigate the potential use of the macrolactone globalide in thermoset synthesis via the photoinduced thiol–ene reaction. A series of six lipase‐catalyzed poly(globalide‐caprolactone) copolyesters bearing internal main‐chain unsaturations ranging from 10 to 50 and 100 mol % were successfully crosslinked in the melt with equal amounts of thiol groups from trimethylolpropane‐trimercapto propionate affording fully transparent amorphous elastomeric materials with different thermal and viscoelastic properties. Three major conclusions can be drawn from this study: (i) high thiol–ene conversions (>80%) were easily attained for all cases, while maintaining the cure behavior, and irrespective of functionality at reasonable reaction rates; (ii) parallel chain‐growth homopropagation of the ene monomer is insignificant when compared with the main thiol–ene coupling route; and (iii) high ene‐density copolymers result in much lower extracted sol fractions and high T_g values as a result of a more dense and homogeneous crosslinked network. The thiol–ene system evaluated in this contribution serve as model example for the sustainable use of naturally occurring 1,2‐disubstituted alkenes in making semisynthetic polymeric materials in high conversions with a range of properties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012.     

A versatile approach to the synthesis of polyphosphazene derivatives via the thiol–ene reaction

The thiol–ene radical addition reaction has been successfully used to synthesize polyphosphazene derivatives. Poly[bis(allylamino)phosphazene] with pendant allyl groups was reacted with different thiol reagents under UV irradiation. These thiol reagents include 1‐pentanethiol, 3‐mercaptopropionic acid, 3‐mercapto‐1,2‐propane‐diol, and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glucopyranose. ¹H NMR analyses confirm that the allyl polyphosphazene can be quantitatively modified by the mercaptans. In total, 100% conversion of the allyl groups was reached in <60 min toward the first three mercaptans, whereas about 80% conversion of the allyl groups was reached after 120‐min reaction toward the thioglucose. This method is a facile route for the synthesis of functional polyphosphazenes without the needs for protection/deprotection procedures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thiol–enes: Chemistry of the past with promise for the future

The photopolymerization of mixtures of multifunctional thiols and enes is an efficient method for the rapid production of films and thermoset plastics with unprecedented physical and mechanical properties. One of the major obstacles in traditional free‐radical photopolymerization is essentially eliminated in thiol–ene polymerizations because the polymerization occurs in air almost as rapidly as in an inert atmosphere. Virtually any type of ene will participate in a free‐radical polymerization process with a multifunctional thiol. Hence, it is possible to tailor materials with virtually any combination of properties required for a particular application. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5301–5338, 2004     

Influence of the alkene structure on the mechanism and kinetics of thiol–alkene photopolymerizations with real‐time infrared spectroscopy

The effect of the chemical structure on the reactivity of alkenes used in thiol–ene photopolymerizations has been investigated with real‐time infrared spectroscopy. Model studies of thiol–ene photoreactions with various monofunctional hydrocarbon alkenes and the monofunctional thiol ethyl‐3‐mercaptopropionate have been performed to identify and understand structure–reactivity relationships. The results demonstrate that terminal enes react very rapidly with thiol, achieve complete conversion, and are independent of the aliphatic hydrocarbon substituent length. Disubstitution on a single carbon of a terminal ene significantly reduces the reactivity, whereas substitution on the carbon α to the terminal ene has a minimal influence on the reactivity. Internal trans enes display reduced reactivity and a lower overall conversion and deviate from the standard thiol–ene reaction mechanism because of steric strain induced by 1,3‐interactions. The reactivity and conversion of internal trans enes decrease as the substituents on the ene become larger, reaching a minimum when the substituent size is greater than or equal to that of propyl groups. Internal cis enes react rapidly with thiol; however, they undergo a fast isomerization–elimination reaction sequence generating the trans ene, which proceeds to react at a reduced rate with thiol. The reactivity of cyclic enes is dictated by ring strain, stereoelectronic effects, and hydrogen abstractability. The reactivity trends in the model studies have been used to explain the photopolymerization mechanism and kinetics of a series of multifunctional thiol–ene systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6283–6298, 2004     

Efficient initiation of radical‐mediated thiol‐ene chemistry with photoactive silica particles

This work aims at the design of photoactive inorganic filler by covalently attaching tri(methoxy)silyl‐functionalized bis(acyl)phosphane oxides (TEMSI²‐BAPO) onto silica particles. The immobilization of the photoactive groups is evidenced by spectroscopic measurements and thermal gravimetric analysis. The modified particles are then incorporated into thiol–ene resins to study the efficiency of the Norrish type I photofragmentation reaction of the covalently bound TEMSI²‐BAPO derivatives. The photopolymerization kinetics of the thiol–ene system is monitored by FT‐IR spectroscopy and photo‐DSC upon prolonged exposure with UV‐light and compared with the results achieved with IRGACURE 819 (free BAPO). Rapid curing and high conversion yields are obtained evidencing the high efficiency of the photoactive particles. In addition, negative‐toned patterns are inscribed in thin thiol–ene films by photolithographic processes and characterized by microscopic techniques demonstrating the versatile applicability of the photoactive particles. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 894–902     

Dendrimers in thiol‐ene crosslinked networks and the effect of subsequent generations on thermoset properties

A series of well‐defined allyl‐ether functionalized polyester dendrimers has been synthesized via the divergent approach using traditional esterification reactions. Two commercially available trifunctional thiols, trimethylolpropane tri(3‐mercaptopropanoate) (TRIS) and ethoxylated trimethylolpropane tri(3‐mercaptopropanoate) (ETTMP), were incorporated with the dendrimers into the thiol‐ene polymer networks. The thiol‐ene reactions were conducted at room temperature and cured by UV light without the addition of photoinitiatior. Highly crosslinked films were obtained and characterized with respect to mechanical (DMA) and thermal (DSC and TGA) properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 589–601, 2009     

Fluorinated vinyl ethers as new surface agents in the photocationic polymerization of vinyl ether resins

The syntheses of fluorinated vinyl ethers (H₂C?CHOCH₂CH₂C_nF_2n+1, n = 6 or 8) and their copolymerizations with bis(4‐vinyloxybutyl) isophthalate are reported. The fluorinated monomers were prepared by the transetherification of ethyl vinyl ether and fluorinated alcohols in a 75% yield. Added in low concentrations (0.1–3.0 wt %) to formulations containing bis(4‐vinyloxybutyl) isophthalate, they did not affect the kinetics of the cationic photopolymerization. The cured films were transparent and showed interesting properties in terms of wettability, hardness, cross‐cut adhesion, and chemical inertness. The fluoromonomers increased the hydrophobicity of the film surface, whereas the adhesion on various substrates such as glass and wood was unchanged. An increase in the methyl ethyl ketone resistance was also observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2890–2897, 2003     

Sequential interpenetrating poly(ethylene glycol) hydrogels prepared by UV‐initiated thiol–ene coupling chemistry

Poly(ethylene glycol) (PEG)‐diallyls, ranging from 2 to 8 kDa, were successfully reacted with a trifunctional thiol crosslinker via thiol–ene coupling reaction to construct four different primary PEG hydrogels. These systems were used as scaffolds for the preparation of a library of sequential interpenetrating networks (SeqIPNs). The solid content of the secondary networks varied between 21 and 34% and was dependent on the length of the absorbing PEGs. The gel fractions for the IPNs were above 85%. Additionally, the lowest degree of swelling was found for the IPN based on 2‐kDa PEG (315%), whereas the 8‐kDa PEG IPN exhibited a value of 810%. The SeqIPN strategy facilitated hydrogel systems that cover a larger domain of tensile modulus (192–889 kPa) when compared with single hydrogel networks (175–555 kPa). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of thiol–ene functionalized siloxanes and evaluation of their crosslinked network properties

Three types of linear thiol‐functionalized siloxane oligomers and three types of ene‐functionalized oligomers were synthesized and subsequently photopolymerized. Within each type of thiol‐functionalized oligomer, the ratio of mercaptan repeat units to nonreactive phenyl repeat units was varied to manipulate both the crosslink density and the degree of secondary interactions through π–π stacking. Similarly, the repeat units of the three ene‐functionalized oligomers are composed of allyl‐functional monomers, benzene‐functional monomers, and octyl‐functional monomers in varying ratios of benzene:octyl but with a constant fraction of allyl moieties. The structural composition of the siloxane oligomers plays a pivotal role in the observed material properties of networks formed through thiol–ene photopolymerization. Networks with a high concentration of thiol functionalities exhibit higher rubbery moduli, ultimate strengths, and Young's moduli than networks with lower thiol concentrations. Moreover, the concentration of functionalities capable of participating in secondary interactions via hydrogen bonding or π–π stacking directly impacts the network glass transition temperature and elasticity. The combination of low crosslink density and high secondary interactions produces networks with the greatest toughness. Finally, the fraction of octyl repeats correlates with the hydrophobic nature of the network. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of water‐soluble allyl‐functionalized oligochitosan and its modification by thiol–ene addition in water

A novel, straightforward and versatile chemical pathway has been studied to functionalize water‐soluble chitosan oligomers. This metal‐free methodology is based on the epoxy‐amine reaction of the allyl glycidyl ether with chitosan, followed by thiol‐ene radical coupling reaction of ω‐functional mercaptans, using 4,4′‐Azobis(4‐cyanovaleric acid) as a free radical initiator. Both reactions were entirely carried out in water. In a preliminary step, chitosan depolymerization was carried out using H₂O₂ in an acetic medium under 100 W microwave irradiation, optimizing the yield of water‐soluble oligomers. Functionalization by six different thiols bearing alcohol, carboxylic acid, ester, and amino groups was then performed, leading to a range of functional oligochitosans with different grafting efficiencies. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 39–48     

Synthesis and surface properties of novel fluorinated polyurethane base on F‐containing chain extender

A novel fluorinated chain extender, (1‐(ethyl(2‐hydroxyethyl)amino)‐3‐ ((3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctyl)oxy)propan‐2‐ol) (FPO), was synthesized and characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and elemental analysis. Poly (ether urethane)s containing various amounts of the chain extender with fluorinated side chains (FPUs) were prepared by isophorone diisocyanate (IPDI), polytetra‐methylene‐ether‐glycol (PTMG), 3‐aminopropyltriethoxysilane (KH‐550), and 1,4‐butandiol (BDO). Films of FPUs were investigated by water absorption, contact angle, pencil hardness, adhesive force, and thermal analysis. Coating FPUs on micro‐nano concave‐convex structure plate realizes superhydrophobic performance. Scanning electron microscope (SEM) and atomic force microscopy (AFM) demonstrated that there is a lot of irregular concave‐convex structure, which forms a typical air cushion model. X‐ray photoelectron spectroscopy (XPS) analysis showed that surface fluorine content is 165% more than that of film average fluorine content. The superhydrophobic plate with 10% or higher F‐containing FPUs coating is of outstanding chemical corrosion resistance, excellent solvent resistance, and wear resistance.