Living polymerization of aryl substituted acetylenes by MoCl5 and WCl6 based initiators: The ortho phenyl substituent effect

The polymerization of phenylacetylene initiated by MoCl₅ and WCl₆ based initiators was monitored directly in the NMR sample tube and demonstrated the presence of backbiting and intramolecular cyclization reactions. It was shown that the ratio of cis to trans structural units obtained by isomerization prior to double bond formation dictates the degree of backbiting and intramolecular cyclization reactions. This cis–trans ratio determines the length of cis–transoidal sequences present in the polymer backbone which are available for both backbiting and intrachain cyclization reactions. The cyclic trimers obtained in the metathesis polymerization of phenylacetylene are formed only through the cis–cisoidal-induced backbiting and/or intramolecular reactions. The o-trimethylsilylphenylacetylene follows a living mechanism of polymerization. This is due to the fact that the size of the ortho substituent suppresses the cis–transoidal to cis–cisoidal isomerization reactions and therefore eliminates the backbiting reactions. The steric hindrance provided by the size of the ortho substituent also eliminates interchain and intrachain reactions.     

Copolymers of phenylacetylene and para‐nitrophenylacetylene with nonlinear optical properties: Further insight on the conformational structure

Copolymers of phenylacetylene (PA) and para‐nitrophenylacetylene (pNPA), named poly(PA‐co‐pNPA), were obtained in different PA/pNPA ratios and different reaction conditions with Rh(I) catalysts. The structure of the copolymers was investigated with IR, laser Raman, ¹H NMR, electron spin resonance (ESR), and diffuse reflective ultraviolet–visible (DRUV) light spectroscopies. The pristine polymers had a cis–transoidal structure as the predominant conformation with some trans sequences. Detailed ESR studies supported by computer simulation and conformation analysis have suggested that the trans sequences were due to pNPA sequences and that the cis‐C?C bond sequences of pNPA were associated with a stabilized cis radical formed by four to five of pNPA monomers. This particular stabilization was probably the reason for the higher reactivity of pNPA as compared with PA. These cis sequences were preferentially cleaved to generate π radicals. The compression and, to a minor extent, thermal treatment of poly(PA‐co‐pNPA) samples induced a cis‐to‐trans isomerization, leading to a trans–transoidal form with a planar zigzag structure and with a conjugation length up to n = 24 repeat units, determined by DRUV and Raman experiments. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2365–2376, 2004     

Controlled stereochemistry of polyamides derived from cis/trans‐1,4‐cyclohexanedicarboxylic acid

A series of copolyamides 12.y was synthesized either with y = 6, or 1,4‐cyclohexanedicarboxylic acid (1,4‐CHDA) residue, or a mixture of both. The influence of the synthetic route of 1,4‐CHDA containing polyamides on the obtained cis–trans ratio of the incorporated 1,4‐CHDA was investigated. The use of acid chlorides provided a synthetic route with full control of the cis–trans ratio of the 1,4‐CHDA residue during synthesis, whereas synthesis at elevated pressure and temperature caused isomerization. The content and cis–trans ratio of 1,4‐CHDA in the copolyamides were determined by solution ¹³C NMR spectroscopy. Increasing the degree of partial substitution of the adipic acid by 1,4‐CHDA resulted in an increase in T_m, even for low molar precentages of 1,4‐CHDA. This phenomenon points to isomorphous crystallization of both the 12.6 and 12.CHDA repeating units. The mps of the synthesized polyamides were independent of the initial cis–trans ratio of 1,4‐CHDA, provided that the samples were annealed at 300 °C before DSC analysis. The polyamides exhibited a different melting pattern depending on the 1,4‐CHDA content. At a low a 1,4‐CHDA content a net exothermic recrystallization occurred during melting, whereas at higher contents of 1,4‐CHDA this recrystallization occurs to a lesser extent, and two separate melting areas are observed. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 833–840, 2001     

Thermal cis–trans isomerization of cis–transoidal polyphenylacetylene

Solution and solid-state thermal cis-trans isomerization of cis–transoidal polyphenylacetylene was investigated. At temperatures higher than 120°C, cis-trans thermal isomerization in solution is accompanied by cyclization, aromatization, and scission of the polymer chain. Both spectral and kinetics data showed that at temperatures lower than 120°C, not only cis-trans thermal isomerization takes place but also intramolecular cyclization.     

Photocyclization reactions. Part 8. Synthesis of 2‐quinolone,quinoline and coumarin derivatives using trans‐cis isomerization by photoreaction

2‐Quinolone 2 , quinoline 3 , coumarin (2H‐1‐benzopyran‐ 2 ‐one) 5 , and 2H‐1‐benzopyran hemiacetal 6 were synthesized by photocyclization reaction of traans‐o‐aminocinnamoyl derivatives trans‐ 1 and trans‐o‐hydroxycinnamoyl derivatives trans‐ 4 . The reaction proceeds through trans‐cis isomerization followed by intramolecular cyclization.     

Influence of stereochemistry on the thermal properties of partially cycloaliphatic polyamides

The effects of the partial substitution of 1,4‐disubstituted cyclohexane monomers for linear aliphatic monomers in polyamides are discussed. More specifically, the relation between the stereochemistry of the cycloaliphatic residues and the thermal properties [melting temperature (T_m) and crystallization temperature (T_cr)] was investigated. For this purpose, two different types of copolyamides were synthesized: in polyamides 12.6, the adipic acid residues were partially replaced by cis/trans‐1,4‐cyclohexanedicarboxylic acid (1,4‐CHDA), whereas in polyamides 4.14, the 1,4‐diaminobutane residues were partially substituted with cis/trans‐1,4‐diaminocyclohexane (1,4‐DACH). For both systems, increasing the degree of substitution of cycloaliphatic residues for linear aliphatic residues resulted in a rise of both T_m and T_cr. This points to the isomorphous crystallization of the linear and cycloaliphatic residues. In contrast to the use of 1,4‐DACH as a comonomer, 1,4‐CHDA residues showed isomerization upon thermal treatment of the polyamides. This isomerization of the cyclohexane residues influenced the thermal properties of the copolyamides. The use of a nonisomerizing cis–trans mixture of 1,4‐DACH exhibited the large influence of the stereochemistry of the cycloaliphatic residues on the T_m of the copolyamides. For both the 1,4‐CHDA‐ and 1,4‐DACH‐based copolyamides, differential scanning calorimetry analysis revealed that recrystallization occurs during melting. This exothermal effect becomes less pronounced with an increasing content of rigid cycloaliphatic residues. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1962–1971, 2002     

Click chemistry‐assisted triazole‐substituted azobenzene and fulgimide units in the pendant‐based copoly(decyloxymethacrylate)s for dual‐mode optical switches

Copolymer containing new thermally reversible click chemistry‐assisted triazole‐substituted azobenzene and fulgimide units in the pendant F‐co‐A was prepared by free‐radical solution addition polymerization technique. The F and A were also prepared for comparison. The DSC analysis of F indicates that the polymer possessing the C‐form of fulgimide unit exhibited higher T_m than that of E‐form of the same polymer and revealed that the C‐form of fulgimide unit in F is highly ordered. The cis‐trans back isomerization behavior of the click chemistry‐assisted triazole‐substituted azobenzene unit in film A has thermal irreversibility, while in F‐co‐A it exhibited thermal reversibility. The UV‐exposed film of F‐co‐A heated around T_g leads to cis‐trans back isomerization of azobenzene unit and thermally stable C‐form of fulgimide which retains its conjugated structure where both the photochromic units are converted into planar conformations and exhibit high fluorescence properties. The fluorescence maxima of C‐form in F‐co‐A red shifted compared with F , because the substituted triazole ring in the azobenzene unit stabilized the C‐form of fulgimide unit. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7843–7860, 2008     

Initiation of Radical Chain Reactions of Thiol Compounds and Alkenes without any Added Initiator: Thiol‐Catalyzed cis/trans Isomerization of Methyl Oleate

A kinetic study of the dodecanethiol‐catalyzed cis/trans isomerization of methyl oleate (cis‐ 2 ) without added initiator was performed by focusing on the initiation of the radical chain reaction. The reaction orders of the rate of isomerization were 2 and 0.5 for 1 and cis‐ 2 , respectively, and an overall kinetic isotope effect k_H/k_D of 2.8 was found. The initiation was shown to be a complex reaction. The electron‐donor/‐acceptor (EDA) complex of dodecanethiol ( 1 ) and cis‐ 2 formed in a pre‐equilibrium reacts with thiol 1 to give a stearyl and a sulfuranyl radical through molecule‐assisted homolysis (MAH) of the sulfur–hydrogen bond. Fragmentation of the latter gives the thiyl radical, which catalyzes the cis/trans isomerization. A computational study of the EDA complex, MAH reaction, and the sulfuranyl radical calculated that the activation energy of the isomerization was in good agreement with the experimental result of E_A=82 kJ M ^?1. Overall, the results may explain that the thermal generation of thiyl radicals without any initiator is responsible for many well‐known thermally initiated addition reactions of thiol compounds to alkenes and their respective polymerizations and for the low shelf‐life stability of cis‐unsaturated thiol compounds and of mixtures of alkenes and thiol compounds.     

Mechanistic study of trans⇆cis isomerization of the substituted azobenzene moiety bound on a liquid‐crystalline polymer

A mechanistic study of the trans?cis isomerization of the azobenzene moiety in a side‐chain liquid‐crystal polymer system was carried out with six liquid‐crystalline polymethacrylates in which different electron‐withdrawing substituents were attached to the para‐positions of the azobenzene chromophores. Compared to the non‐nitro‐substituted azo polymers, the nitro‐substituted azo polymers exhibited two quite different behaviors: an extraordinarily high reaction rate of the thermal cis–trans isomerization and an unexpected composition of cis–trans isomers obtained from the photochemical trans–cis isomerization process. A potential energy profile for the isomerization process was established on basis of the structures of the proposed transition states and was employed to elucidate the reaction mechanism. The results confirmed that the nitro‐substituted azo polymer system proceeded via a rotation mechanism in either direction of the trans?cis isomerization reaction, whereas the non‐nitro‐substituted species were more likely to follow an inversion mechanism. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2296–2307, 2001     

A solution‐processible poly(p‐phenylene vinylene) without alkyl substitution: Introducing the cis‐vinylene segments in polymer chain for improved solubility,blue emission,and high efficiency

A soluble all‐aromatic poly(2,5‐diphenyl‐1,4‐phenylenevinylene) (2,5‐DP‐PPV) is synthesized by utilizing aromatic phosphonium and aldehyde monomers through Wittig reaction. The H¹ NMR and FTIR measurements indicate that over 50% content of cis‐vinylene units exist in polymer backbone. The diphenyl‐substituted benzaldehyde monomer plays an important role to enhance cis‐products (Z‐selectivity) in Wittig reactions. The twisted cis‐segments in polymer backbone reduce the interchain interactions and enhance the solubility of such all‐aromatic PPV derivative in common organic solvents. 2,5‐DP‐PPV exhibits good solubility in common organic solvents, such as tetrahydrofuran and chloroform. The polymer film exhibits a blue light emission (λ_max = 485 nm) and a very high photoluminescence efficiency of 78%. The cis‐trans photo isomerization of this polymer in solution and the impact on the optical properties are also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5242–5250, 2008     

Reaction of phenylacetylene with Ti(OR)4?AlEt3 and V(acac)3?AlEt3: Cyclotrimerization versus chain oligomerization

The polymerization of phenylacetylene with the microheterogeneous Ti(OR)₄? AlEt₃ and homogeneous vanadium acetylacetonate/aluminum triethyl Ziegler–Natta catalyst systems was analyzed. The effects of some cocatalysts (e.g., pyridine and phenylacetylide) and the solvent, temperature, and time were analyzed. Both catalyst systems produced poly(phenylacetylene) (PPA) and a 1,2,4‐triphenylbenzene (1,2,4‐TPB)/1,3,5‐triphenylbenzene (1,3,5‐TPB) cyclotrimer mixture in various molar ratios. The titanium catalyst showed the lowest PPA/triphenylbenzene ratio. The 1,2,4‐TPB/1,3,5‐TPB molar ratio decreased with increasing PPA. On the basis of the spectroscopic data, PPA had a cis–transoidal stereoregular structure. The molecular mass of PPA was determined with vapor pressure osmometry and gel permeation chromatography. A mechanism for the polymerization reaction versus cyclotrimerization was proposed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1228–1237, 2005     

NMR signal assignment of cis/trans‐conformational segments in MEH‐CN‐PPV

Poly[2‐(2′‐ethylhexyloxy)‐5‐methoxy‐1,4‐phenylene‐(1‐cyanovinylene)] MEH‐CN‐PPV and its all‐trans model compound 1,4‐bis(α‐cyanostyryl)‐2‐(2‐ethylhexyloxy)‐5‐methyloxybenzene were synthesized via Knoevenagel condensation. All‐cis isomer and cis–trans isomer of 1,4‐bis(α‐cyanostyryl)‐2‐(2‐ethylhexyloxy)‐5‐methyloxybenzene were prepared by the photoisomerization reaction. Comparison of the ¹H NMR spectra between MEH‐CN‐PPV and three model compounds proved the occurrence of cis‐vinylene in the backbone of MEH‐CN‐PPV. According to the ratio between the cis‐vinylene signal and trans‐vinylene signal, the content of the cis‐vinylene could be estimated to be 15% in MEH‐CN‐PPV. This large cis‐vinylene content came from the rapid photochemical isomerization of cyanovinylene and was likely relative to the poor electroluminescence property of MEH‐CN‐PPV. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1105–1113, 2008     

Convenient synthesis of fully and partially deuterated stereoregular poly(phenylacetylene)s bearing a carboxy pendant and helicity induction on the polymers with chiral amines and its memory

Poly[(4-carboxyphenyl)acetylene] and its derivatives deuterated in the main chain and/or on the phenyl group (poly- 1 's) were conveniently synthesized by the polymerization of 4-ethynylbenzoic acid or its derivative deuterated on the phenyl group in the presence of bases with a water-soluble rhodium complex in water or deuterium oxide. The obtained polymers possesses highly cis–transoidal stereoregular structures according to NMR and Raman spectroscopy. Possible deuterium isotope effects of these partially and fully deuterated poly- 1 's during the helicity induction with chiral amines and its memory assisted by achiral amines were investigated. The thermal cis–trans isomerization of the methyl esters of poly- 1 's was also studied with ¹H NMR spectroscopy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4711–4722, 2004     

Light‐Induced Bending of Needle‐Like Crystals of Naphthylvinylbenzoxazole Triggered by trans–cis Isomerization

New diarylethene derivatives containing benzoxazole ( NBO ) and benzothiazole ( NBT ) have been synthesized. Light‐induced trans–cis isomerization of NBO and NBT took place in crystals, and only induced the needle‐like crystals of NBO to bend backwards away from the UV light source. The movement of the atoms was deemed to take place during the isomerization of NBO ; hence, strain would be produced and accumulated rapidly in the surface of crystals exposed to UV light. The uniform release of strain led to the bending of needle‐like crystals. The light‐induced trans–cis isomerization efficiency of NBT was too low to drive the motion of crystals, which might have originated from the large repulsion between naphthyl and benzothiazole. These results provide a new platform for the transformation of light energy into mechanical energy in molecular crystals through the unimolecular photochemical reaction of diarylethene derivatives.     

Photoinduced Reversible Solid‐to‐Liquid Transitions for Photoswitchable Materials

Heating and cooling can induce reversible solid‐to‐liquid transitions of matter. In contrast, athermal photochemical processes can induce reversible solid‐to‐liquid transitions of some newly developed azobenzene compounds. Azobenzene is photoswitchable. UV light induces trans‐to‐cis isomerization; visible light or heat induces cis‐to‐trans isomerization. Trans and cis isomers usually have different melting points (T_m) or glass transition temperatures (T_g). If T_m or T_g of an azobenzene compound in trans and cis forms are above and below room temperature, respectively, light may induce reversible solid‐to‐liquid transitions. In this Review, we introduce azobenzene compounds that exhibit photoinduced reversible solid‐to‐liquid transitions, discuss the mechanisms and design principles, and show their potential applications in healable coatings, adhesives, transfer printing, lithography, actuators, fuels, and gas separation. Finally, we discuss remaining challenges in this field.     

Degradation behavior of stereoregular cis–transoidal poly(phenylacetylene)s

The stability of poly(phenylacetylene)s in solution was systematically studied. Cis–transoidal poly(phenylacetylene) prepared with a Rh catalyst readily underwent autoxidative degradation into oligomers, whereas a W‐based polymer with a trans‐rich geometrical structure degraded slowly under similar conditions. The degradation of W‐based poly(phenylacetylene) was independent of the solvents, whereas the degradation of the cis–transoidal material strongly depended on the solvents, and very rapid degradation was observed in toluene and CHCl₃. A reduction in the degradation rate in the absence of oxygen and the appearance of carbonyl groups in an IR spectrum and aldehyde protons in a ¹H NMR spectrum of the resulting oligomers indicated the direct participation of oxygen in the degradation where light was supposed to assist the degradation by producing radicals on the main chain. The cis content of cis–transoidal poly(phenylacetylene) was unchanged during the degradation, unlike for the acid‐catalyzed decomposition, in which the cis content decreased linearly as the molecular weight decreased. Ring‐substituted poly(phenylacetylene)s degraded slowly compared with poly(phenylacetylene), regardless of the kind of substituent, which suggests that steric factors affected the degradation rate. The use of radical scavengers such as 2,2,6,6‐tetramethylpiperidine‐1‐oxyl and diphenylpicrylhydrazil suppressed the decomposition. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3130–3136, 2001     

Polymerization of acetylenic derivatives. XXX. Isomers of polyphenylacetylene

Cis-transoidal (orange, soluble, and of low crystallinity) and cis-cisoidal (red, insoluble, and highly crystalline) polyphenylacetylenes (PPA) were prepared by Ziegler-Natta catalysts and trans-cisoidal (yellow, soluble, and amorphous) polyphenylacetylenes were prepared by using phosphine complexes, TiCl₄ and by thermal initiation. The cis-transoidal and cis-cisoidal structures isomerize thermally in the solid state above 100°C. In solution the cis-transoidal structure isomerizes above 80°C. The polymers obtained by thermal isomerization are soluble, amorphous, and have a trans-cisoidal structure. At temperatures higher than 120°C the cis–trans isomerization is accompanied by cyclization and by scission of the polymer chain. A method was developed for determination of cis content of cis-transoidal and cis-cisoidal polyphenylacetylenes.     

Nonequilibrium structure of cis‐azo compounds in polymethyl methacrylate after photochemical conversion from the trans form

Study was made of the cis → trans isomerization kinetics of a series of azo compounds in polymethyl methacrylate. It was shown that under ultraviolet irradiation a quantity of cis molecules is formed in the stressed states. The stressed cis molecules' relaxation to equilibrium state takes place at temperatures that are far lower than the glass transition temperature. The influence of the relaxation process on the reverse conversion of cis molecules to the trans molecules was investigated along with the influence of temperature. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1753–1761, 1999     

Preparation and emission properties of various poly(dimethylsilylenearylenevinylene)s: Effects of geometric structures and π units on their emission properties

trans‐Poly(dimethylsilylenearylenevinylene)s (trans‐rich) and cis‐poly(dimethylsilylenearylenevinylene)s (cis‐rich) containing phenylene, biphenylene, and phenylenesilylenephenylene units were prepared by hydrosilylation catalyzed with the RhI(PPh₃)₃ complex. The addition of a phenylene π unit to poly(silylenephenylenevinylene) expanded the conjugation in the main chain, whereas the insertion of a dimethylsilylene σ unit in the biphenylene moiety reduced the conjugation. UV spectra of the trans‐type polymers showed redshifts and hyperchromic effects with respect to those of the cis‐type polymers, indicating wider conjugation, and the quantum yields of emission of the former polymers were much higher than those of the latter polymers. The quantum yield of the trans‐rich polymer with the biphenylene moiety reached 0.15, which was about 10² times as large as those of trans‐type polymers with phenylene (3.4 × 10^?3) and phenylenesilylenephenylene (1.9 × 10^?3) moieties. The effects of the geometric structure and π unit on the absorption and emission properties of these polymers were examined with molecular orbital methods. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 535–543, 2002; DOI 10.1002/pola.10139     

A New Benzotriazole‐Mediated Stereoflexible Gateway to Hetero‐2,5‐diketopiperazines

Open chain Cbz‐L ‐aa¹‐L ‐Pro‐Bt (Bt=benzotriazole) sequences were converted into either the corresponding trans‐ or cis‐fused 2,5‐diketopiperazines (DKPs) depending on the reaction conditions. Thermodynamic tandem cyclization/epimerization afforded selectively the corresponding trans‐DKPs (69–75 %). Complementarily, tandem deprotection/cyclization led to the cis‐DKPs (65–72 %). A representative set of proline‐containing cis‐ and trans‐DKPs has been prepared. A mechanistic investigation, based on chiral HPLC, kinetics, and computational studies enabled a rationalization of the results.