Preparation and characterization of novel transparent plasticized poly(butylene terephthalate)‐co‐poly(alkylene glycol terephthalate) gel

Transparent plasticized gels with good mechanical, optical, and dielectric properties have important applications in various fields. We prepared a new gel using a poly(butylene terephthalate)‐co‐poly(alkylene glycol terephthalate) (PBT‐co‐PAGT) copolymer and a plasticizer, dibutyl adipate (DBA). This method improved the polymer crystallinity, and suppressed particle formation in cast‐films when the polymer was dissolved in 1,1,1,3,3,3‐hexafluoro‐2‐propanol, followed by solvent evaporation, and enabled uniform swelling of the polymer network by the plasticizer to form a transparent and flexible gel. The dielectric constants of the developed PBT‐co‐PAGT/DBA gels are much higher than those of PBT‐co‐PAGT films at low frequency. We believe that these PBT‐co‐PAGT/DBA gels could be used as photovoltaic, dielectric, and actuator materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 829–832     

Phase behavior of tetramethylpolycarbonate blends with styrene‐based methacrylate copolymers and their interaction energies

The miscibility of tetramethylpolycarbonate (TMPC) blends with styrenic copolymers containing various methacrylates was examined, and the interaction energies between TMPC and methacrylate were evaluated from the phase‐separation temperatures of TMPC/copolymer blends with lattice‐fluid theory combined with a binary interaction model. TMPC formed miscible blends with styrenic copolymers containing less than a certain amount of methacrylate, and these miscible blends always exhibited lower critical solution temperature (LCST)‐type phase behavior. The phase‐separation temperatures of TMPC blends with copolymers such as poly(styrene‐co‐methyl methacrylate), poly(styrene‐co‐ethyl methacrylate), poly(styrene‐co‐n‐propyl methacrylate), and poly(styrene‐co‐phenyl methacrylate) increase with methacrylate content, go through a maximum, and decrease, whereas those of TMPC blends with poly(styrene‐co‐n‐butyl methacrylate) and poly(styrene‐co‐cyclohexyl methacrylate) always decrease. The calculated interaction energy for a copolymer–TMPC pair is negative and increases with the methacrylate content in the copolymer. This would seem to contradict the prediction of the binary interaction model, that systems with more favorable energetic interactions have higher LCSTs. A detailed inspection of lattice‐fluid theory was performed to explain such phase behavior. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1288–1297, 2002     

Two‐dimensional Fourier transform infrared spectroscopy study of biosynthesized poly(hydroxybutyrate‐co‐hydroxyhexanoate) and poly(hydroxybutyrate‐ co‐hydroxyvalerate)

Generalized two‐dimensional (2D) Fourier transform infrared correlation spectroscopy was used to investigate the effect of the comonomer compositions on the crystallization behavior of two types of biosynthesized random copolymers, poly(hydroxybutyrate‐co‐hydroxyhexanoate) and poly(hydroxybutyrate‐co‐hydroxyvalerate). The carbonyl absorption band around 1730 cm^?1 was sensitive to the degree of crystallinity. 2D correlation analysis demonstrated that the 3‐hydroxyhexanoate units preferred to remain in the amorphous phase of the semicrystalline poly(hydroxybutyrate‐co‐hydroxyhexanoate) copolymer, resulting in decreases in the degree of crystallinity and the rate of the crystallization process. The poly(hydroxybutyrate‐co‐hydroxyvalerate) copolymer maintained a high degree of crystallinity when the 3‐hydroxyvalerate fraction was increased from 0 to 25 mol % because of isodimorphism. The crystalline and amorphous absorption bands for the carbonyl bond for this copolymer, therefore, changed simultaneously. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 649–656, 2002; DOI 10.1002/polb.10126     

Synthesis and micellization of thermoresponsive galactose‐based diblock copolymers

Thermoresponsive double hydrophilic diblock copolymers poly(2‐(2′‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐b‐poly(6‐O‐methacryloyl‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP) with various compositions and molecular weights were obtained by deprotection of amphiphilic diblock copolymers P(MEO₂MA‐co‐OEGMA)‐b‐poly(6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP), which were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization using P(MEO₂MA‐co‐OEGMA) as macro‐RAFT agent. Dynamic light scattering and UV–vis studies showed that the micelles self‐assembled from P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP were thermoresponsive. A hydrophobic dye Nile Red could be encapsulated by block copolymers P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP upon micellization and released upon dissociation of the formed micelles under different temperatures. The galactose functional groups in the PMAGP block have specific interaction with HepG2 cells, and P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP has potential applications in hepatoma‐targeting drug delivery and biodetection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of chemical activity jumps on the viscoelastic behavior of an epoxy resin: Physical aging response in carbon dioxide pressure jumps

We report the results from tensile creep tests performed on an epoxy resin in the presence of carbon dioxide at different pressures (Pco₂) and at a constant temperature below the glass‐transition temperature. Time‐Pco₂ superposition was applied to the data to account for the plasticization effect because of the interaction between the carbon dioxide molecules and the polymer. In addition, physical aging of the epoxy films was investigated with sequential creep tests after carbon dioxide pressure down‐jumps at constant temperature and after temperature down‐jumps at constant carbon dioxide pressure. The isothermal pressure down‐jump experiments showed physical aging responses similar to the isobaric temperature down‐jump experiments. However, the aging rate for the CO₂ jump was slightly lower than that for the temperature‐jump (T‐jump) experiments, and the retardation time for the Pco₂‐jump experiments was up to 6.3 times longer than for the T‐jump conditions. The results are discussed in terms of classical physical aging and structural recovery frameworks, and speculation about the differences in the energy landscape resulting from the Pco₂‐jump and T‐jump experiments is also made. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2050–2064, 2002     

Preparation and characterization of cyclic polystyrene with short poly(2‐tert‐butylbutadiene) sequences

A polystyrene‐block‐oligo(2‐tert‐butylbutadiene)‐block‐polystyrene triblock copolymer was prepared and cyclized by end‐to‐end ring closure. Ring‐shaped polystyrene‐block‐oligo(2‐tert‐butylbutadiene) was isolated from the coupling product via gel permeation chromatography (GPC) fractionation. The ring polymer was ozonized for decomposition of the oligo(2‐tert‐butylbutadiene) sequences selectively referring to the linear molecule. From GPC analysis of the decomposed products by ozonolysis, it was quantitatively confirmed that the fractionated product was 86% ring molecules. Single chain dimensions of the ring and linear molecules in a good solvent, benzene, and in a θ solvent, cyclohexane, were measured with small‐angle neutron scattering. The ratios of the radii of gyration, R_g(ring)/R_g(linear), were 0.780 in benzene and 0.789 in cyclohexane. These were compared with theoretically predicted values. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1582–1589, 2002     

Synthesis and characterization of novel poly(vinyl chloride)‐based grafts: Poly(vinyl chloride‐co‐2‐chloropropene) fitted with multiple high‐glass‐transition‐temperature polyolefin branches

The tertiary chlorine (Cl^t) content of vinyl chloride/2‐chloropropene copolymers [P(VC‐co‐2CP)] was determined by NMR spectroscopy. Copolymers containing 6.8–47.0 Cl^t's per P(VC‐co‐2CP) chain were used to initiate the cationic grafting of α‐methylstyrene, norbornadiene, indene, and norbornene with Et₂AlCl under various conditions. Grafting was demonstrated by selective solvent extraction, and the effect of the experimental conditions on the grafting efficiency was examined. Select rheological and thermal characteristics of P(VC‐co‐2CP) grafts, including the glass‐transition temperature, heat deflection temperature, and discoloration upon heating, were studied. P(VC‐co‐2CP) carrying 7–11 poly(α‐methylstyrene) or polynorbornadiene branches per chain raised the glass‐transition temperature to, or above, that of a blend control. P(VC‐co‐2CP)s fitted with polyindene or polynorbornene branches were less effective in raising the mechanical properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3644–3651, 2002     

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles by dispersion polymerization

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles were prepared by dispersion polymerization in toluene/2‐methylpropan‐1‐ol medium using cellulose acetate butyrate and dibenzoyl peroxide (BPO) as a steric stabilizer and initiator, respectively. The particle size was reduced with decreasing solvency of the reaction medium (more nuclei were generated) because the critical chain length of the precipitated oligomers decreased with an increasing toluene content, which is a poorer solvent for the polymer than 2‐methylpropan‐1‐ol. There is an optimum initiator concentration (2 wt % BPO relative to monomers) for producing low‐polydispersity particles under given conditions. Additionally, discrete spherical particles were obtained at a low monomer concentration and/or higher polymerization temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1625–1632, 2002     

Preparation of a copolymer of methyl methacrylate with a new monomer, 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate,and its initiation of the graft copolymerization of styrene with a controlled radical mechanism

A copolymer [P(MMA‐co‐TBPM)] was prepared by the radical polymerization of methyl methacrylate (MMA) and 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate (TBPM) with azobisisobutyronitrile as an initiator. TBPM was a new monomer containing an activated ester. Both the copolymer and TBPM were characterized with NMR, IR, and gel permeation chromatography in detail. It was confirmed that P(MMA‐co‐TBPM) could initiate the graft polymerization of styrene by the cleavage of the activated ester of the TBPM segment. This process was controllable, and the molecular weight of the graft chain of polystyrene increased with the increment of conversion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4398–4403, 2002     

Poly(methacrylamide‐co‐2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) hydrogels: Investigation of pH‐ and temperature‐dependent swelling characteristics and their characterization

Novel poly(methacrylamide‐co‐2‐acrylamido‐2‐methyl‐ 1‐propanesulfonic acid) (poly(MAAm‐co‐AMPS)) hydrogels were synthesized by free radical polymerization of methacrylamide (MAAm) and 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) in deionized water at 60 °C by using ammonium peroxydisulfate (APS), N,N′‐methylenebisacrylamide (MBAAm) and N,N,N′,N′‐tetramethylethylenediamine (TEMED) as initiator, crosslinker, and activator, respectively. To investigate the effects of feed content on the pH‐ and temperature‐dependent swelling behavior of poly(MAAm‐co‐AMPS), molar ratio of MAAm to AMPS in feed was varied from 90/10 to 10/90. Structural characterization of gels was performed by Fourier transform infrared (FTIR) spectroscopy using attenuated total reflectance (ATR) technique. Thermal and morphological characterizations of gels were performed by thermogravimetric analysis (TGA) and scanning electron microscopy (SEM), respectively. Although an apparent pH‐sensitivity was not observed for the poly(MAAm‐co‐AMPS) gels during the swelling in different buffer solutions, their temperature‐sensitivity became more evident with the increase in AMPS content of copolymer. Thermal stability of poly(MAAm‐co‐AMPS) gels increased with MAAm content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Aminated PCL‐based copolymers by chemical modification of poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone)

A novel method is proposed to access to new poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) using poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone) as polymeric substrate. First, ring‐opening (co)polymerizations of α‐iodo‐ε‐caprolactone (αIεCL) with ε‐caprolactone (εCL) are performed using tin 2‐ethylhexanoate (Sn(Oct)₂) as catalyst. (Co)polymers are fully characterized by ¹H NMR, ¹³C NMR, FTIR, SEC, DSC, and TGA. Then, these iodinated polyesters are used as polymeric substrates to access to poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) by two different strategies. The first one is the reaction of poly(αIεCL‐co‐εCL) with ammonia, the second one is the reduction of poly(αN₃εCL‐co‐εCL) by hydrogenolysis. This poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) (F_αNH2εCL < 0.1) opens the way to new cationic and water‐soluble PCL‐based degradable polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6104–6115, 2009     

Backfilling‐Free Strategy for Biopatterning on Intrinsically Dual‐Functionalized Poly[2‐Aminoethyl Methacrylate‐co‐Oligo(Ethylene Glycol) Methacrylate] Films

We demonstrated protein and cellular patterning with a soft lithography technique using poly[2‐aminoethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate] films on gold surfaces without employing a backfilling process. The backfilling process plays an important role in successfully generating biopatterns; however, it has potential disadvantages in several interesting research and technical applications. To overcome the issue, a copolymer system having highly reactive functional groups and bioinert properties was introduced through a surface‐initiated controlled radical polymerization with 2‐aminoethyl methacrylate hydrochloride (AMA) and oligo(ethylene glycol) methacrylate (OEGMA). The prepared poly(AMA‐co‐OEGMA) film was fully characterized, and among the films having different thicknesses, the 35 nm‐thick biotinylated, poly(AMA‐co‐OEGMA) film exhibited an optimum performance, such as the lowest nonspecific adsorption and the highest specific binding capability toward proteins.     

Negative‐working photoresist of methacrylate polymers based on the transesterification of the 2‐hydroxyethyl group in the presence of an acid

This article reports a novel crosslinking functionality of the 2‐hydroxyethyl methacrylate unit (HEMA) in the presence of an acid. The polymeric compositions, consisting of a polymer containing the HEMA unit and a photoacid generator, were insolubilized in an aqueous base developer on exposure to UV light and a successive baking process to provide a negative‐working photoresist. A series of poly(benzyl methacrylate‐co‐methacrylic acid‐co‐2‐hydroxyethyl methacrylate) terpolymers with various contents of HEMA were prepared to elucidate the photopolymeric characteristics. The polymer behavior in films was examined by a comparison of the photosensitivity and IR spectroscopic method. Experiments with a model compound were also carried out. On the basis of the results, we found that the resist was insolubilized by crosslinking through the transesterification of HEMA segments due to acid generated from the photoacid generator and subsequent heating. The advantage of using the 2‐hydroxyethyl group is that in the terpolymer, the HEMA unit is transparent at a short‐wavelength region and is a promising crosslinking unit for ArF lithographic photoresists. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1858–1867, 2002     

Synthesis of π‐conjugated oligomer that can form metallo polymers

An oligo(p‐phenylene vinylene) that contains terpyridine ligands has been synthesized. Upon addition of metal ions, a π‐conjugated metallo polymer is formed in which the well‐defined character of oligomers and the material properties of polymers are combined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4020–4023, 2002     

Synthesis of amphiphilic block copolymer by metal‐free ring‐opening oligomerization of glycidyl phenyl ether initiated with tetra‐n‐butylammonium fluoride in the presence of poly(ethylene glycol) monomethyl ether

Metal‐free ring‐opening oligomerization of glycidyl phenyl ether (GPE) initiated with tetra‐n‐butylammonium fluoride (n‐Bu₄NF) (5.0 mol %) was performed in the presence of poly(ethylene glycol) monomethyl ether (PEGM) (5.0, 10, 20 mol %) as a chain transfer agent, by which the resulting polymers having narrow molecular weight distribution (M_w/M_n < 1.2) were obtained in 80–84% yield. Solubility of the obtained polymers in water increased with the increase of amount of PEGM, owing to an increase of number of PEGM‐block‐oligo(GPE) molecules compared to that of oligo(GPE) molecules having FCH₂– group at the initiating end as well as a decrease in degree of oligomerization of oligo(GPE). The PEGM‐block‐oligo(GPE) was isolated by filtration of the polymer aqueous solution, whose number‐average molecular weights determined by NMR spectroscopic analysis were almost consistent to the theoretical values. The PEGM‐block‐oligo(GPE) formed micelles in aqueous media, whose average particle diameter was 58 and 140 nm for the copolymers having a composition of PEGM:GPE = 62:38 and 53:47, respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4451–4458     

Living copolymerization of ethylene with norbornene by fluorinated enolato‐imine titanium catalyst

Complex [Ti(κ²‐N,O‐{2,6‐F₂C₆H₃N?C(Me)C(H) ?C(CF₃) O})₂Cl₂] ( 1 ) was evaluated as catalyst for living copolymerization of ethylene (E) with norbornene (N) upon activation with dried methylaluminoxane (d‐MAO) at temperatures between 25 and 90 °C. Copolymerization performed at different [N]/[E] feed ratios afforded stereoirregular alternating high molar mass P(E‐co‐N) with narrow molar mass distribution. The living nature of E‐co‐N copolymerization by 1 /d‐MAO was demonstrated by kinetics at 50 °C. This catalyst system was used for the synthesis of block copolymers such as polyethylene (PE)‐block‐P(E‐co‐N) with a crystalline PE block and an amorphous P(E‐co‐N) block as well as P(E‐co‐N)₁‐block‐P(E‐co‐N)₂, having different norbornene contents in the segments and thus having different T_g values. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Grafting of polycaprolactone onto poly(ethylene‐co‐vinyl alcohol) and application to polyethylene‐based bioerodable blends

Poly(ethylene‐co‐vinyl acetate) (EVA) powders containing 10 and 20 wt % of vinyl acetate (VAc) units was saponified in ethanol/KOH solution in a heterogeneous manner. Intermolecular interaction between vinyl alcohol(VOH) units in the produced poly(ethylene‐co‐vinyl alcohol) (EVOH) promoted the crystallization of intervening segments composed of ethylene units. Ring opening polymerization of caprolactone (CL) in the presence of EVOH gave EVOH‐g‐PCL graft copolymers with relatively short chain branches. Even though the graft copolymerization was carried out in a homogeneous solution, all the VOH units were not equally reactive for the PCL grafting. And the unreacted VOH units decreased very slowly with the graft copolymerization time. EVOH‐g‐PCL decreased the domain size of the dispersed phase in low density polyethylene (PE)/biodegradable master batch (MB) blends, and thus increased their tensile properties significantly. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2561–2569, 2002     

Synthesis of gradient copolymers with complexing groups by RAFT polymerization and their solubility in supercritical CO2

We report the synthesis of new gradient fluorinated copolymers with complexing groups and soluble in supercritical carbon dioxide (scCO₂). Poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐acetoacetoxyethyl methacrylate) (poly(FDA‐co‐AAEM)) and poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐vinylbenzylphosphonic acid diethylester) (poly(FDA‐co‐VBPDE)) gradient copolymers were synthesized by reversible addition fragmentation chain transfer polymerization in α,α,α‐trifluorotoluene. Poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐vinylbenzylphosphonic diacid) (poly(FDA‐co‐VBPDA)) gradient copolymer was efficiently obtained by cleavage of the phosphonic ester groups of poly(FDA‐co‐VBPDE). The cloud points of these gradient copolymers in dense CO₂ were measured in a variable volume view cell at temperatures between 25 and 65 °C. The gradient copolymers show very good solubility in compressed CO₂ with the decreasing order: poly(FDA‐co‐AAEM) ≈ poly(FDA‐co‐VBPDE) > poly(FDA‐co‐VBPDA). Following a green chemistry strategy, poly(FDA‐co‐AAEM) gradient copolymer was successfully synthesized in scCO₂ with a good control over number‐average molecular weight and composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5448–5460, 2009     

Anionic alternating copolymerization of α‐arylacrylates with methyl methacrylate: Effect of monomer sequence on fluorescence

Anionic polymerizations of acrylates possessing 1‐pyrenyl (Py1), 1‐naphthyl (Np1), 2‐naphthyl (Np2), and 2‐fluorenyl (Fl2) groups as α‐substituents were investigated as well as the properties of the obtained polymers. Py1 and Np1 did not undergo polymerization, whereas Np2 and Fl2, annulated α‐phenylacrylates at 3,4‐position of the phenyl group, afforded homo‐oligomers and alternating copolymers with methyl methacrylate (MMA). The oligomer of Fl2 [oligo(Fl2)] exhibited strong excimer emission in diluted solution. In contrast, dominant monomer emission was observed for the alternating copolymer with MMA [poly(Fl2‐co‐MMA)]. In the alternating copolymer, MMA units could function as spacers preventing the association of pendant fluorene moieties to suppress the excimer formation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2806–2814     

Cocrystallization in blends of random tetrafluoroethylene fluorinated copolymers: The effect of the chain structure and crystallization conditions

The possibility of the cocrystallization of random fluorinated tetrafluoroethylene copolymers was investigated with differential scanning calorimetry and wide‐angle X‐ray scattering. In particular, mixtures composed of poly(tetrafluoroethylene)‐co‐(hexafluoropropylene) containing 8 or 1 mol % comonomer or poly(tetrafluoroethylene)‐co‐perfluoromethylvinylether (2–10 mol % comonomer) were examined. The extent of cocrystallization was determined by the difference in the comonomer content, being higher when the difference was lower, and it was favored when quenching from the melt state was adopted. Nevertheless, a key to determining the extent of cocrystallization was the behavior of counits with respect to inclusion or exclusion from the crystal lattice: when the components were different with respect to this behavior, they were not likely to be miscible in the crystal state even if the difference in the comonomer content was low. Moreover, the similarity in the crystallization rates between the components played an important role: the cocrystallization decreased as the difference in the crystallization rate increased until, when the difference became high enough, the blend became immiscible. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1477–1489, 2002