Effect of the sulfonic acid group on copolymers of aniline and toluidine with m‐aminobenzene sulfonic acid

This article describes the results of the preparation and characterization of self‐doped conducting copolymers of aniline and toluidine with m‐aminobenzene sulfonic acid. The copolymers have an intrinsic acid group that is capable of doping polyaniline. Spectroscopic, morphological, and electrical conductivity studies have provided insight into the structural and electronic properties of the copolymers. The differences in the properties of polyaniline and polytoluidine due to the sulfonic acid ring substituent on the phenyl ring are discussed. The scanning electron micrographs of the copolymers reveal regions of sharp‐edged, needle‐shaped structures, whereas the X‐ray diffraction patterns show that the copolymers are relatively more crystalline in nature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4065–4076, 2002     

Highly conductive soluble terpolymers of aniline,toluidine, and o‐aminobenzoic acid/m‐aminobenzenesulfonic acid

Two series of terpolymers, one of o‐/m‐toluidine and aniline with o‐aminobenzoic acid and the other of o‐/m‐toluidine and aniline with m‐aminobenzenesulfonic acid, have been synthesized by oxidative polymerization via an emulsion method with ammonium persulfate as the oxidant and HCl as the external dopant. The terpolymers exhibit excellent solubility and retain the high conductivity (∼1 S cm⁻¹) characteristic of the unsubstituted homopolymer, polyaniline. The terpolymers also possess higher thermal stability than polyaniline. This can be attributed to the presence of internal doping groups and substituents, which introduce flexibility to the otherwise rigid polyaniline backbone. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3040–3048, 2005     

Polyaniline copolymers with solvent‐mimic side chains

We investigated new polyaniline copolymers with solvent‐mimic side chains for enhanced processability in various solvents. The solvent‐mimic side chains, benzyloxypropoxy (BOP), phenoxybutoxy (POB), and dihydroxypropoxy (DHP), were introduced into copolymers and used with nonpolar aromatic and polar alcoholic solvents, respectively. Compared to a polyaniline homopolymer, polyaniline copolymers with a small amount of side chains (<4 mol %) exhibit different physical properties, including film‐forming ability. This can be attributed to the solvent‐mimic side chains strongly interacting with the solvent and/or the polyaniline backbone. Especially, in nonpolar aromatic solvents, polyaniline copolymers with nonpolar aromatic BOP and POB side chains exhibit good film‐forming ability leading to high electrical conductivity, while the polyaniline homopolymer did not form a film. Therefore, introducing solvent‐mimic side chains in conducting polymers is a very attractive method of enhancing their processability and physical properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1986–1995     

Second harmonic generation in polymers containing a new azo chromophore based on phenylnitrobenzoxazole

The synthesis of the new chromophores 2‐{4‐[4‐(N,N‐dihydroxyethylamino)‐phenylazo]‐phenyl}‐6‐nitrobenzoxazole ( 1 ) and 4‐[4‐(N,N‐dihydroxyethylamino)phenylazo]‐benzoic acid ( 2 ) is described. Three homopolymers obtained by the polycondensation of 1 with propyloxy‐terephthalic acid and 1 and 2 with 2,4‐tolylenediisocianate as well as two copolymers obtained by polycondensation of appropriate mixtures of chromophores 1 and 2 with 2,4‐tolylene‐diisocianate were prepared and characterized. All as‐prepared polymers but one (homopolyurethane of 1 ) were amorphous and exhibited good optical clarity, good thermal stability above the glass transition, and solubility in organic solvents. The second‐order nonlinear optical behavior of the amorphous polymers was investigated on spin‐coated corona‐poled films through second harmonic generation (SHG) experiments at 1064 nm. At this wavelength, resonance‐enhanced values of the SHG coefficient d₃₃ were found in the range between 6 and 34 pm/V where higher values were observed for polymers with a higher molar content of 1 . © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1468–1475, 2002     

Morphological study on water‐borne conducting polyaniline‐poly(ethylene oxide) blends

Conducting polyaniline‐poly(ethylene oxide) blends were prepared from their aqueous solutions. The blends displayed an electrical conductivity percolation threshold as low as 1.83 wt % of polyaniline loading. As demonstrated by scanning electron microscopy, polarized optical microscopy, and wide‐angle X‐ray diffraction studies, the conducting polyaniline took a fibrillar morphology in the blend, and it existed only in the amorphous phase of poly(ethylene oxide). A three‐phase model combining morphological factors instead of a two‐phase model was proposed to explain the low‐conductivity percolation threshold. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 605–612, 2002; DOI 10.1002/polb.10114     

Synthesis,characterization, and electrical properties of nanostructural polyaniline doped with novel sulfonic acids (4‐{n‐[4‐(4‐nitrophenylazo)phenyloxy]alkyl}aminobenzene sulfonic acid)

4‐{n‐[4‐(4‐Nitrophenylazo)phenyloxy]alkyl}aminobenzene sulfonic acid (Cn‐ABSA, where n = 2, 4, 6, 8, or 10) as a novel dopant for conducting polymers of polyaniline (PANI) was designed and synthesized. The molecular structure of Cn‐ABSA was characterized with ¹H NMR, Fourier transform infrared, and secondary‐ion mass spectrometry. Nanostructures (nanotubes or nanorods) of PANI–(Cn‐ABSA) were successfully synthesized with a self‐assembly process in the presence of Cn‐ABSA as the dopant. The morphology (shape and size) and conductivity of the resulting nanostructures strongly depended on the number of alkyl groups (n) and, in particular, the addition of water before polymerization. The formed micelles of aniline/Cn‐ABSA/water were proposed to be templatelike in forming PANI–(Cn‐ABSA) nanostructures on the basis of the emulsion properties measured by dynamic light scattering. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3485–3497, 2001     

Synthesis and polymerization of 5‐(methacrylamido)tetrazole,a water‐soluble acidic monomer

The reaction of methacryloyl chloride with 5‐aminotetrazole gave the polymerizable methacrylamide derivative 5‐(methacrylamido)tetrazole ( 4 ) in one step. The monomer had an acidic tetrazole group with a pK_a value of 4.50 ± 0.01 in water methanol (2:1). Radical polymerization proceeded smoothly in dimethyl formamide or, after the conversion of monomer 4 into sodium salt 4‐Na , even in water. A superabsorbent polymer gel was obtained by the copolymerization of 4‐Na and 0.08 mol % N,N′‐methylenebisacrylamide. Its water absorbency was about 200 g of water/g of polymer, although the extractable sol content of the gel turned out to be high. The consumption of 4‐Na and acrylamide (as a model compound for the crosslinker) during a radical polymerization at 57 °C in D₂O was followed by ¹H NMR spectroscopy. Fitting the changes in the monomer concentration to the integrated form of the copolymerization equation gave the reactivity ratios r _4‐Na = 1.10 ± 0.05 and r_acrylamide = 0.45 ± 0.02, which did not differ much from those of an ideal copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4333–4343, 2002     

Chemical synthesis and electric properties of the conducting copolymer of aniline and o‐aminophenol

A copolymer, poly(aniline‐co‐o‐aminophenol), was prepared chemically by using ammonium peroxydisulfate as an oxidant. The monomer concentration ratio of o‐aminophenol to aniline strongly influences the copolymerization rate and properties of the copolymer. The optimum composition of a mixture for the chemical copolymerization consisted of 0.3 M aniline, 0.021 M o‐aminophenol, 0.42 M ammonium peroxydisulfate, and 2 M H₂SO₄. The result of cyclic voltammograms in a potential region of ?0.20 to 0.80 V (vs.SCE) indicates that the electrochemical activity of the copolymer prepared under the optimum condition is similar to that of polyaniline in more acid solutions. However, the copolymer still holds the good electrochemical activity until pH 11.0. Therefore, the pH dependence of the electrochemical property of the copolymer is improved, compared with poly(aniline‐co‐o‐aminophenol) prepared electrochemically, and is much better than that of polyaniline. The spectra of IR and ¹H NMR confirm that o‐aminophenol units are included in the copolymer chain, which play a key role in extending the usable pH region of the copolymer. The visible spectra of the copolymers show that a high concentration ratio of o‐aminophenol to aniline in a mixture inhibits the chain growth. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5573–5582, 2007     

Synthesis and electrical properties of polyaniline/polyaniline grafted multiwalled carbon nanotube mixture via in situ static interfacial polymerization

The mixture of polyaniline (PANi) and PANi grafted multiwalled carbon nanotube (PANi‐g‐MWNT) was prepared by a two‐step reaction sequence. MWNT was first functionalized with 4‐aminobenzoic acid via “direct” Firedel‐Crafts acylation in polyphosphoric acid (PPA)/phosphorous pentoxide (P₂O₅) medium to afford 4‐aminobenzoyl‐functionalized MWNT (AF‐MWNT). Then, aniline was polymerized via an in situ static interfacial polymerization in H₂O/CH₂Cl₂ in the presence of AF‐MWNT in organic phase to yield the mixture of PANi and PANi‐g‐MWNT. The mixture was characterized with a various analytical techniques such as elemental analysis (EA), Fourier transform infrared spectroscopy (FTIR), wide angle X‐ray diffraction (WAXD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), cyclic voltammogram (CV), UV‐vis and fluorescence spectroscopies, and electrical conductivity measurement. On the basis of TGA analysis, the thermo‐oxidative stability of the mixture was markably improved compared to that of PANi homopolymer. Even after dedoping, in alkaline solution, the mixture would still display semimetallic conductivity (4.9 S/cm). The capacitance of the mixture was also greatly enhanced and its capacitance decay with respect to cycle times was significantly reduced. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1962–1972, 2010     

Self‐assembled anionic micellar template for polypyrrole,polyaniline, and their random copolymer nanomaterials

We report an anionic surfactant approach for size and shape control in polyaniline, polypyrrole, and their polyaniline‐co‐polypyrrole random copolymer nanomaterials. A renewable resource azobenzenesulfonic acid anionic surfactant was developed for template‐assisted synthesis of these classes of nanomaterials. The surfactant exists as 4.3 nm micelle in water and self‐organizes with pyrrole to produce spherical aggregates. The sizes of the spherical aggregates were controlled by water dilution and subsequent oxidation of these templates, produced polypyrrole nanospheres of 0.5 μM to 50 nm dimensions. The anionic surfactant interacts differently with aniline and forms cylindrical aggregates, which exclusively produce nanofibers of ∼180 nm in diameter with length up to 3–5 μM. The template selectivity of surfactant toward aniline and pyrrole was used to tune the nanostructure of the aniline‐pyrrole random copolymers from nanofiber‐to‐nanorod‐to‐nanospheres. Dynamic light scattering technique and electron microscopes were used to study the mechanistic aspects of the template‐assisted polymerization. The four probe conductivity of the copolymers showed a nonlinear trend and the conductivity passes through minimum at 60–80% of pyrrole in the feed. The amphiphilic dopant effectively penetrates into the crystal lattices of the polymer chain and induces high solid state ordering in the homopolymer nanomaterials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 830–846, 2009     

Water‐resistant conducting hybrids from electrostatic interactions

Conductive hybrids were prepared in a water/ethanol solution via the sol–gel process from an inorganic sol containing carboxyl groups and water‐borne conductive polyaniline (cPANI). The inorganic sol was prepared by the hydrolysis and condensation of methyltriethoxysilane with the condensed product of maleic anhydride and aminopropyltriethoxysilane as a catalyst, for which the carboxyl counterion along the cPANI backbone acted as an electrostatic‐interaction moiety. The existence of this electrostatic interaction could improve the compatibility of the two components and contribute to the homogeneous dispersion of cPANI in the silica phase. The electrostatic‐interaction hybrids displayed a conductivity percolation threshold as low as 1.1 wt % polyaniline in an emeraldine base, showing 2 orders of magnitude higher electrical conductivity than that without electrostatic interactions. The electrostatic‐interaction hybrids also showed good water resistance; the electrical conductivity with a cPANI loading of 16 wt % underwent a slight change after 14 days of soaking in water. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1424–1431, 2007     

Simultaneous construction of the polymer backbone and side chains by three‐component polycondensation: The synthesis of polyurethanes with allyl side chains from dialdehydes,alkylene N,N′‐bis(trimethylsilyl) carbamates,and allyltrimethylsilane

Polyurethanes with allyl side chains were synthesized by the simultaneous acid‐catalyzed reaction of dialdehydes ( 1 ), alkylene N,N′‐bis(trimethylsilyl) carbamates ( 4 ), and allyltrimethylsilane ( 5 ). When 5 was added to a mixture of 1 , 4 , and the catalyst, a low molecular weight polymer was formed, as well as a large amount of an insoluble gel. However, when a mixture of 1 , 4 , and 5 was added to the catalyst, the formation of gel was depressed, and the desired polyurethanes, consisting of 1 , 4 , and 5 in a molar ratio of 1/1/2, were obtained in good yields. This polyurethane synthesis is unusual in that it concurrently constructs both the polymer backbone and the functional side chains from three starting compounds. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1236–1242, 2002     

Preparation of isotactic‐rich poly(dimethyl vinylphosphonate) and poly(vinylphosphonic acid) via the anionic polymerization of dimethyl vinylphosphonate

A vinylphosphonate monomer, dimethyl vinylphosphonate (DMVP), has been polymerized by anionic initiators. Anionic polymerization of DMVP with tert‐butyllithium (t‐BuLi) in combination with a Lewis acid, tributylaluminum (n‐Bu₃Al), in toluene proceeded smoothly to give an isotactic‐rich poly(dimethyl vinylphosphonate) (PDMVP) with relatively narrow molecular weight distribution. Although all the PDMVPs were soluble in water, the isotactic‐rich PDMVP was insoluble in acetone and in chloroform which are good solvents for an atactic PDMVP prepared by radical polymerization. The isotactic‐rich PDMVP showed higher thermal property than that of the atactic PDMVP. Moreover, we successfully prepared poly(vinylphosphonic acid) (PVPA) through the hydrolysis of the isotactic‐rich PDMVP, which formed a highly transparent, self‐standing film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1677–1682, 2010     

Preparation of densely grafted poly(aniline‐2‐sulfonic acid‐co‐aniline)s as novel water‐soluble conducting copolymers

Various densely grafted polymers containing poly(aniline‐2‐sulfonic acid‐co‐aniline)s as side chains and polystyrene as the backbone were prepared. A styryl‐substituted aniline macromonomer, 4‐(4‐vinylbenzoxyl)(N‐tert‐butoxycarbonyl)phenylamine (4‐VBPA‐^tBOC), was first prepared by the reaction of 4‐aminophenol with the amino‐protecting moiety di‐tert‐butoxyldicarbonate, and this was followed by substitution with 4‐vinylbenzyl chloride. 4‐VBPA‐^tBOC thus obtained was homopolymerized with azobisisobutyronitrile as an initiator, and this was followed by deprotection with trifluoroacetic acid to generate poly[4‐(4‐vinylbenzoxyl)phenylamine] (PVBPA) with pendent amine moieties. Second, the copolymerization of aniline‐2‐sulfonic acid and aniline was carried out in the presence of PVBPA to generate densely grafted poly(aniline‐2‐sulfonic acid‐co‐aniline). Through the variation of the molar feed ratio of aniline‐2‐sulfonic acid to aniline, various densely grafted copolymers were generated with different aniline‐2‐sulfonic acid/aniline composition ratios along the side chains. The copolymers prepared with molar feed ratios greater than 1/2 were water‐soluble and had conductivities comparable to those of the linear copolymers. Furthermore, these copolymers could self‐dope in water through intermolecular or intramolecular interactions between the sulfonic acid moieties and imine nitrogens, and this generated large aggregates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1090–1099, 2005     

Structural effects of dopants and polymerization methodologies on the solid‐state ordering and morphology of polyaniline

The solid‐state three‐dimensional ordering of polyaniline–dopant complexes was investigated with four structurally different sulfonic acid dopants. The doped materials were produced in three different ways: polyaniline emeraldine base doped with sulfonic acid (aqueous route), in situ polymerization at the organic–water solvent interface (interfacial route), and in situ polymerization in organic and aqueous solvent mixtures (bilayer route). p‐Toluenesulfonic acid (PTSA), 5‐sulfosalicilic acid (SSA), camphorsulfonic acid (CSA), and dodecylbenzene sulfonic acid (DBSA) were employed as dopants. The conductivity of the aqueous‐route samples showed 10 and 100 times higher conductivity than the interfacial and bilayer routes, respectively. WXRD studies suggested that the crystallinity of the doped samples was dependent on both the structure of the dopants and the polymerization techniques. DBSA increases the polyaniline interplanar distance and produced highly crystalline materials via the aqueous and bilayer routes but failed with the interfacial route because of poor solubility in water. CSA, PTSA, and SSA produced highly crystalline samples by the interfacial route but failed with the aqueous (except for CSA) and bilayer routes. SEM analysis revealed that the doped materials of the interfacial route had excellent continuous morphology and uniform submicrometer‐size particle distributions in comparison with those of the aqueous and bilayer routes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1321–1331, 2005     

Electrorheological properties of suspensions of monodispersed micron‐sized polyaniline composite particles

Monodispersed micron‐sized polyaniline (PANi) composite particles were synthesized by chemically oxidative polymerization of aniline in the presence of functional porous polymer particles. The formation of the PANi‐coated composite particles was confirmed by scanning electron microscopy. Electrorheological (ER) properties of the monosized composite particle suspensions were then investigated under different DC electric fields by altering the particle characteristics. The ER effect of the PANi composite suspensions was largely dependent on the composition ratio (PANi loading), the particle conductivity, and the particle concentration. Dynamic oscillation measurements revealed that the applied electric field induced the viscoelastic property of the ER suspensions by generating the chain structures of the suspended particles. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1163–1170, 2002     

Dehydrocoupling and Diels–Alder reactions on siloxane polymers

Dehydrocoupling reactions between linear poly(methylhydrosiloxane) {Me₃SiO–[MeSi(H)O]_n–SiMe₃} and alcohols such as cholesterol, anthracene‐9‐carbinol, (12‐crown‐4)‐2‐carbinol, pyrene‐1‐carbinol, 4‐methyl‐5‐thiazoleethanol, and 4‐pyridilpropanol were introduced under catalytically mild conditions. The degrees of conversion of Si? H bonds in polysiloxane were monitored with ¹H NMR spectra. The reaction of the 9‐methoxyanthracene adduct on siloxane polymers and maleimide derivatives (maleimide, N‐ethylmaleimide, and maleic acid anhydride) produced [2+4]‐cycloadducts in very high yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4013–4019, 2002     

Synthesis and properties of polyacetylenes with salicylideneaniline groups

Acetylenes containing salicylideneaniline groups—N‐salicylidene‐3‐ethynylaniline ( 1 ), N‐(3‐t‐butylsalicylidene)‐3‐ethynylaniline ( 2 ), and N‐(3‐t‐butylsalicylidene)‐4‐ethynylaniline ( 3 )—polymerized smoothly and gave yellow to red polymers in excellent yields when a rhodium catalyst was employed. Polymers with alkyl substituents on the aromatic rings [poly( 2 ) and poly( 3 )] were soluble in CHCl₃, tetrahydrofuran, and so forth, whereas the polymer without alkyl substituents [poly( 1 )] was insoluble in any solvent. N‐(3‐t‐Butylsalicylidene)propargylamine did not provide any polymer. Thermogravimetric analyses of the resultant polymers exhibited good thermal stability (T_o, onset temperature of weight loss > 300 °C). The ultraviolet–visible spectra of the polymers showed absorption maxima and cutoff wavelengths around 360 and 520 nm, respectively. The polymers exhibited largely Stokes‐shifted fluorescence (emission wavelength ? 550 nm) upon photoexcitation at 350 nm, which resulted from the photoinduced intramolecular proton transfer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2458–2463, 2002     

Synthesis and characterization of conducting poly(aniline‐co‐o‐aminophenethyl alcohol)s

Poly(o‐aminophenethyl alcohol) and its copolymers containing the aniline unit were synthesized in aqueous hydrochloric acid medium by chemical oxidative polymerization. The chemical composition of these novel polymers was determined spectroscopically, and their viscosities were measured. These polymers exhibit good solubility in organic solvents that is attributed mainly to the polar hydroxyethyl side groups. Their structures (chain conformation and morphological structure) and properties (conductivity, electrochemical characteristics, glass transition, and degradation behavior) were characterized and then interpreted on the basis of the chemical composition along with the electronic and steric hindrance effects associated with the hydroxyethyl side group. Overall, the side group has a significant effect on the polymerization and influences the structure, chain conformation, and properties of the resultant polymer. The poly(aniline‐co‐o‐aminophenethyl alcohol)s containing 20–40 mol % o‐aminophenethyl alcohol units are potential conducting materials for microelectronic and electromagnetic shielding applications because they are easier to process than polyaniline but retain its beneficial properties. These polymers can also be used as a functional conducting polymer intermediate owing to the reactivity of the side group. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 983–994, 2002     

Polymerization of high‐solids‐content acrylic latexes using a nonionic polymerizable surfactant

Stable high‐solids‐content methyl methacrylate/butylacrylate latexes with small particle sizes (in the range of 150–180 nm) were obtained with a nonionic polymerizable surfactant (surfmer). Three percent of surfmer with respect to monomer was proven to be enough for the stabilization of the latexes. The influence of different operational variables on the stabilization of the final latex was analyzed, and the conditions needed to obtain coagulum‐free latex were assessed. The inorganic potassium persulfate/sodium metabisulfite initiator system provided better stability than the organic tert‐butyl hydroperoxide/ascorbic acid as a result of the end groups. In addition, the feeding of acrylic acid during the second half of the polymerization improved the stability of the final latex. The reduction of the feeding time was effective in the stabilization. Proof of the surfmer incorporation into the particles is presented. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1552–1559, 2002