Investigation of Suzuki–Miyaura catalyst‐transfer polycondensation of AB‐type fluorene monomer using coordination‐saturated aryl Pd(II) halide complexes as initiators

Novel triarylamine‐based coordination‐saturated aryl Pd(II) halide complexes ligated by PEt₃, PCy₃, and P(o‐tol)₃ were successfully synthesized by direct oxidative addition of aryl halide to the corresponding Pd(0) precursors. Suzuki–Miyaura coupling polymerization of 2‐(7‐halide‐9,9‐dioctylfluoren‐2‐yl)?1,3,2‐dioxaborinane with these Pd(II) complexes as initiators was investigated for the synthesis of poly(fluorene)s with triarylamine end group. Pd(II) complexes with PCy₃ or P(o‐tol)₃ exhibited catalytic activity and realized the catalyst‐transfer polycondensation at 75 °C and room temperature, respectively, while the polymerization using Pd(II) catalyst ligated by PEt₃ did not proceed, which indicated that the bulky phosphine ligands could facilitate the reductive elimination and further promote the polymerization. In addition, the dimeric Pd(II) complex with P(o‐tol)₃ can convert into monomeric Pd(II) intermediate with an open coordination site, which had a higher activity. The end groups of the afforded polyfluorene were analyzed by matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectrometry, in which the Ar/H end groups are indicative of the catalyst‐transfer polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1457–1463     

Poly(4‐vinylpyridine) as the host ligand of metal‐containing chromophores for second‐order nonlinear optical active materials

Two formulas of grafted polymers with metal‐containing chromophores, potentially suitable for second‐order nonlinear optics applications, are described. Two chromophores were obtained from a tridentate ligand coordinated to Cu(II) or Pd(II) ions. The organometallic chromophore fragments were grafted to poly(4‐vinylpyridine) by the pyridinic nitrogen of the host polymer. Some qualities displayed by the new metallated polymers are remarkable: (1) a high value of the first hyperpolarizability coefficient of the chromophores, (2) a high content of the grafted chromophore in the polymers (up to 60 wt %), (3) a considerable increase in the glass‐transition temperatures (up to 240 °C), (4) good thermal stability in air (ca. 280 °C), and (5) good optical transparency of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2987–2993, 2002     

Synthesis of helical polyisocyanides bearing aza‐crown ether groups as pendant

We, herein, present a novel synthesis of responsive helical poly(aryl isocyanide)s bearing aza‐crown ethers as pendant groups. Chiral aryl isocyanide monomers bearing an aza‐crown ether as a pendant were designed and synthesized, piror to polymerization using a Pd‐Pt µ‐ethynediyl complex as an initiator to give the corresponding polymers in good yield. The resulting polyisocyanides adopted a stable helical structure in solution, as confirmed by circular dichroism spectroscopic analysis. In addition, the polymers were soluble in various solvents. Furthemore, the addition of suitable alkali metal ions to the crown ether of the sidechain on the helical polyisocyanide to form host‐gest complexes resulted in deformation of the helix due to electrostatic repulsion, and these phenomena depended on the size of metal cations. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 496–504.     

Synthesis of a rare‐metal adsorbing polymer by three‐component polyaddition of diamines,carbon disulfide,and diacrylates in an aqueous/organic biphasic medium

Three‐component polyaddition of diamines, carbon disulfide (CS₂), and diacrylates in an aqueous/organic biphasic medium produced a polymer capable of adsorbing rare metals. By using a 1:1 mixture of toluene and H₂O, the polyaddition reaction of 1,3‐di‐4‐piperidylpropane (1), CS₂, and 1,6‐hexanediol diacrylate (2) proceeded efficiently in the presence of Et₃N to produce a poly(dithiourethane‐amine) with a high proportion of dithiourethane units almost quantitatively. Quantitative formation of 1‐CS₂ adducts in the aqueous phase was followed by efficient reaction with diacrylate at the biphasic interface. The resulting poly(dithiourethane‐amine) adsorbed Pd(II) and Pt(IV) efficiently under acidic conditions due to the high affinity of thiocarbonyl sulfur atoms for soft metal ions. The polymers showed highly selective adsorption of Pd(II) from a mixture of metal ions [Pd(II), Cr(III), Cu(II), Fe(III), Mn(II), Pb(II), and Zn(II)], indicating their potential utilization for selective recovery of rare‐metals. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Metal complexes with polymeric ligands: Chelation and metalloinitiation approaches to metal tris(bipyridine)‐containing materials

Synthetic approaches to metal complexes with polymeric ligands are described. The development of efficient methods for preparing simple bipyridine (bpy) derivatives and their corresponding metal complexes has facilitated their use as initiators and coupling agents in polymer syntheses. Ligand reagents were utilized as initiators in controlled polymerization reactions to form poly(2‐R‐2‐oxazolines) (R = methyl, ethyl, phenyl, undecyl), polystyrenes, poly(methyl methacrylates) (PMMA)s, poly(ϵ‐caprolactone)s, and poly(lactic acid)s with bipyridine chelates at the end or centers of the chains. Poly(ethylene glycol) macroligands were formed by a chain‐coupling method. Detailed studies of reaction kinetics were performed to determine the scope and limitations of each reaction type with different catalysts and reaction conditions. These results are illustrated for bpyPMMA_n (n = 1 or 2), which was prepared by atom transfer radical polymerization with a CuBr/1,4,4,7,7,10‐hexamethyltriethylenetetraamine catalyst system. Results of the kinetics investigations performed with other ligands and metalloinitiators are summarized. Macroligands thus prepared were coordinated to a labile metal ion, Fe(II), with standard protocols. Ultraviolet–visible spectral data for selected Fe‐centered polymers are provided that confirm the production of the targeted polymeric iron complex products. An inert metal, Ru(II), was used as a template for generating architectural diversity; polymeric complexes with one to six chains emanating from the central core, as well as different heteroarm star products, were prepared. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4704–4716, 2000     

Poly(N‐phenylmaleimide‐co‐acrylic acid)–copper(II) and poly(N‐phenylmaleimide‐co‐acrylic acid)–cobalt(II) complexes: Synthesis,characterization, and thermal behavior

The free‐radical copolymerization of N‐phenylmaleimide (N‐PhMI) with acrylic acid was studied in the range of 25–75 mol % in the feed. The interactions of these copolymers with Cu(II) and Co(II) ions were investigated as a function of the pH and copolymer composition by the use of the ultrafiltration technique. The maximum retention capacity of the copolymers for Co(II) and Cu(II) ions varied from 200 to 250 mg/g and from 210 to 300 mg/g, respectively. The copolymers and polymer–metal complexes of divalent transition‐metal ions were characterized by elemental analysis, Fourier transform infrared, ¹H NMR spectroscopy, and cyclic voltammetry. The thermal behavior was investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG). The TG and DSC measurements showed an increase in the glass‐transition temperature (T_g) and the thermal stability with an increase in the N‐PhMI concentration in the copolymers. T_g of poly(N‐PhMI‐co‐AA) with copolymer composition 46.5:53.5 mol % was found at 251 °C, and it decreased when the complexes of Co(II) and Cu(II) at pHs 3–7 were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4933–4941, 2005     

Metalization of polymer beads via polymer‐supported hydrazines as reducing agents

A new method for depositing metal onto a polymer surface has been developed in which the metal coating of polymer beads is performed with hydrazine functions as reducing agents on the surface of the polymer itself. In this study, glycidyl methacrylate–methyl methacrylate–divinyl benzene terpolymer was prepared as spherical beads with a suspension polymerization methodology. Beads of the polymer sample (210–420‐μm fraction) containing 3.4 mmol g^?1 epoxy were treated with an excess of hydrazinium hydroxide to yield a polymer with 2.3 mmol g^?1 hydrazine functions. The hydrazine functions on the polymer surfaces were efficient in metal reductions. Therefore, the modified bead polymer samples, when soaked in aqueous ammonia solutions of Ni(II), Ag(I), and Cu(II) ions (0.1 M), were covered rapidly by the corresponding zero‐valent metal ions. Metal deposition took place almost quantitatively (ca. 4.5 mmol/g of the polymer) within 60 min of the contact times. The accumulations of metal were followed visually and occurred only on the polymer beads. There was no evidence that the reaction occurred within the solution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 748–754, 2002; DOI 10.1002/pola.10158     

Chiral oxazoline substituted optically active poly(m‐phenylene)s: Synthesis and coupling polymerizations of (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl) oxazoline using transition metal catalysts

Optically active poly(m‐phenylene)s substituted with chiral oxazoline derivatives have been synthesized by the nickel‐catalyzed Yamamoto coupling reaction of optically active (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl)oxazoline derivatives (X = Br or I). The structures and chiroptical properties of the polymers were characterized by spectroscopic methods and thermal gravimetric analyses. The polymers showed higher absolute optical specific rotation values than their corresponding monomer, and showed a Cotton effect at transition region of conjugated main chain. The optical activities of the polymers should be attributed to the higher order structure such as helical conformations. Moreover, the helical conformation could be induced by addition of metal salts into polymer solutions. The polymers showed good thermal stabilities, which was attributable to the oxazoline side chains. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Alternating π‐conjugated copolymer of dithiafulvene with 2,2′‐bipyridyl units

A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)₂Cl₂] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10^?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001     

Synthesis and properties of conjugated copolycondensates consisting of carbazole‐2,7‐diyl and fluorene‐2,7‐diyl

Carbazole and fluorene‐based random and alternating copolycondensates were synthesized to develop high‐performance blue light‐emitting polymers by improving electron injection ability of poly(N‐aryl‐2,7‐carbazole)s that showed intense blue electroluminescence (EL) with good hole‐injection and ‐transport ability. These copolycondensates absorbed light energy at about λ_max = 390 nm in CHCl₃ and 400 nm in film state, and fluoresced at about λ_max = 417 nm in CHCl₃ and 430 nm in the thin film state. Energy gaps between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of them were about 2.9 eV, and the energy levels of LUMO situated lower than that of corresponding polycarbazole. Polymer light‐emitting diode devices having configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)/polymer/CsF/Al using the copolycondensates, poly(N‐arylcarbazole‐2,7‐diyl), and poly(9,9‐dialkylfluorene‐2,7‐diyl), emitted bluish EL at operating voltages lower than 7 V. The device embedded the random copolycondensate showed notably higher performance with maximum luminance of 31,200 cd m^?2 at 11.0 V, and the current efficiencies observed under operating voltages lower than 7 V were higher than those of the other devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

High‐efficiency,electrophosphorescent polymers with porphyrin–platinum complexes in the conjugated backbone: Synthesis and device performance

A series of soluble, conjugated, electrophosphorescent copolymers with (meso‐tetraphenylporphyrinato‐κ⁴N)platinum(II) (PtTPP) complexes incorporated into the polymer main chain were synthesized through the copolymerization of narrow‐band‐gap monomeric porphyrin–platinum(II) complexes and wide‐band‐gap dialkyl‐substituted fluorene monomers by a modified Suzuki coupling reaction. The study of the photoluminescence decay indicated that poly[2,7‐(9,9‐dioctylfluorene)‐co‐2,12‐((meso‐tetraphenylporphyrinato‐κ⁴N)platinum(II))] (PFO–PtTPP) was a triplet emitter. The electroluminescence emission from the fluorene segment was completely quenched for copolymers with PtTPP contents as low as 0.5 mol %. The PFO–PtTPP copolymers emitted deep red light. The device based on the porphyrin–platinum(II) copolymer PFO–5PtTPP (with 5 mol % PtTPP in the copolymer) showed the highest external quantum efficiency of 1.95% with an emission peak at 684 nm in an indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polyvinylcarbazole (PVK)/70:30 (w/w) PFO–5PtTPP: 2‐(biphenyl‐4‐yl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole/Ba/Al device configuration. In comparison with the PFO–PtTPP copolymers synthesized via a postpolymerization metalation route, copolymerization from Pt metal complexes proved to be a more efficient synthetic route for high‐efficiency electrophosphorescent polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4174–4186, 2006     

Copper and iron complexes as visible‐light‐sensitive photoinitiators of polymerization

The utilization of visible lights for the fabrication of polymeric materials is recognized as a promising and environmentally friendly approach. This process relies on the photochemical generation of reactive species (e.g., radicals, radical cations, or cations) from well‐designed photoinitiators (PIs) or photoinitiating systems (PISs) to initiate the polymerization reactions of different monomers (acrylates, methacrylates, epoxides, and vinyl ethers). In spite of the fact that metal complexes such as ruthenium‐ or iridium‐based complexes have found applications in organic and polymer synthesis, the search of other low‐cost metal‐based complexes as PISs is emerging and attracting increasing attentions. Particularly, the concept of the photoredox catalysis has appeared recently as a unique tool for polymer synthesis upon soft conditions (use of light emitting diodes and household lamp). This highlight focuses on recently designed copper and iron complexes as PI catalysts in the application of photoinduced polymerizations (radical, cationic, interpenetrated polymer networks, and thiol‐ene) or controlled radical polymerization under visible light irradiation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2673–2684     

Complex formation of polyethyleneimine with copper(II), nickel(II), and cobalt(II) ions

An influence of the structure of a globule of polyethyleneimine on the complex formation of one with the copper(II), nickel(II), and cobalt(II) ions is described. A change of the coordination number from the pH of solution for complexes of ethylenediamine, diethylenetriamine, and polyethyleneimine with metal ions was found. The fraction of monomer links, bound with metal ions, depends on the volume of the globule of macromolecule as well as the condition of the proceeding reaction. The reaction of complex formation is controlled by the diffusion of metal ions into the polymer globule in solution. The effective equilibrium constants of complex formation were found. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 914–922, 2002; DOI 10.1002/pola.10157     

Significant glass‐transition‐temperature increase through hydrogen‐bonded copolymers

The role of hydrogen bonding in promoting intermolecular cohesion and higher glass‐transition temperatures of polymer is a subject of longstanding interest. A series of poly(vinylphenol‐co‐vinylpyrrolidone) copolymers were prepared by the free‐radical copolymerization of acetoxystyrene and vinylpyrrolidone; this was followed by the selective removal of the acetyl protective group, with corresponding and significant glass‐transition‐temperature increases after this procedure. The incorporation of acetoxystyrene into poly(vinylpyrrolidone) resulted in lower glass‐transition temperatures because of the reduced dipole interactions in its homopolymers. However, the deacetylation of acetoxystyrene to transform the poly(vinylphenol‐co‐vinylpyrrolidone) copolymer enhanced the higher glass‐transition temperature because of the strong hydrogen bonding in the copolymer chain. The thermal properties and hydrogen bonding of these two copolymers were investigated with differential scanning calorimetry and Fourier transform infrared spectroscopy, and good correlations between the thermal behaviors and IR results were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2313–2323, 2002     

Complexation of linear and poly(ethylene oxide)‐grafted poly(methacryl oxyethyl trimethylammonium chloride) with poly(ethylene oxide‐block‐sodium methacrylate)

The interactions between oppositely charged polyelectrolytes were studied in saline aqueous solutions as functions of the temperature and the salt and polymer concentrations. The polyanion was a diblock copolymer composed of a poly(ethylene oxide) block and a poly(sodium methacrylate) block. Two polycations were used, the homopolymer poly(methacryl oxyethyl trimethylammonium chloride) and its poly(ethylene oxide)‐grafted analogue. By dynamic light scattering and turbidity measurements, it was observed that the salt concentration, temperature, and counterion size had a significant effect on the formation of the polymer complexes in aqueous solutions. At a fixed salt concentration and a fixed temperature, it was possible to form completely soluble complexes of an ionic polymer in aqueous solutions between poly(ethylene oxide)‐grafted poly(methacryl oxyethyl trimethylammonium chloride)and the polyanion with a poly(ethylene oxide) block at a 1:1 anion/cation ratio. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1904–1914, 2003     

Theoretical investigation on sulfur‐containing chelating resin‐divalent metal complexes

The complex structures and interactions of sulfur‐containing chelating resin poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfide (PVBS), poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfoxide (PVBSO), and poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfone (PVBSO₂) with divalent metal chlorides (Cu(II), Ni(II), Zn(II), Cd(II), and Pd(II)) were investigated theoretically. Results indicate that PVBS tends to coordinate with metal ions by sulfur and oxygen atoms forming five‐membered ring chelating complexes; while PVBSO and PVBSO₂ prefer to interact with metal ions by the oxygen atom of the sulfoxide or sulfone and hydroxyl group to form six‐membered ring chelating compounds. Theoretical calculations reveal that sulfur atoms of PVBS are the main contributor when coordinate with metal ions, while oxygen atoms also take part in the coordination with Cu(II), Zn(II), and Cd(II). As for PVBSO, the oxygen atoms of sulfoxide group play a key role in the coordination, but sulfur and hydroxyl oxygen also participate in the coordination. Similarly, sulfone group oxygen atoms of PVBSO₂ dominate the coordination of Ni(II), Cu(II), and Pd(II), while the affinities of Zn(II) and Cd(II) are mainly attributed to the hydroxyl oxygen atoms. The computational results are in good agreement with the XPS analysis. Combined the theoretical and experimental results, further understanding of the structural information on the complexes was achieved and the adsorption mechanism was confirmed. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Synthesis and Characterization of the 2‐Methylaminopyridine‐functionalized Polystyrene Resin‐supported Pd(II) Catalyst for the Mizoroki–Heck and Sonogashira Reactions in Water

A new polystyrene‐anchored Pd(II) pyridine complex is synthesized and characterized. This Pd(II) pyridine complex behaves as a very efficient heterogeneous catalyst in the Heck reaction of methyl acrylate with aryl halides and the Sonogashira reaction of terminal alkynes with aryl halides in water. Furthermore, the catalyst shows good thermal stability and recyclability. This polymer‐supported Pd(II) catalyst could easily be recovered by simple filtration of the reaction mixture and reused for more than five consecutive trials without a significant loss in its catalytic activity.     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Synthesis,characterization and catalytic activity in Suzuki–Miyaura coupling of palladacycle complexes with n‐butyl‐substituted N‐heterocyclic carbene ligands

A series of monomeric palladacycle complexes bearing n‐butyl‐substituted N‐heterocyclic carbenes, namely [Pd(NHC)X(dmba)] (dmba: dimethylbenzylamine and [Pd(NHC)X(ppy)]; NHC: 1‐n‐butyl‐3‐substituted benzylimidazol‐2‐ylidene; ppy: 2‐phenylpyridine), were prepared either by transmetallation from the corresponding silver carbene complexes or by the reaction of the corresponding acetate‐bridged palladacycle dimer with N‐heterocyclic carbene ligands in high yields. The palladium(II) complexes were characterized using elemental analyses, APCI‐MS, ¹H NMR and ¹³C NMR spectroscopies. These complexes are efficient in the Suzuki–Miyaura coupling reaction between phenylboronic acid and aryl bromides.     

X‐ray photoelectron spectroscopy of miscible poly(methyl methacrylate)/poly(styrene‐co‐acrylonitrile) and immiscible poly(methyl methacrylate)/polyacrylonitrile polymer surfaces metallized by nickel

A miscible blend of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) and an immiscible blend of poly(methyl methacrylate) and polyacrylonitrile were metallized by nickel, and their surfaces were analyzed by X‐ray photoelectron spectroscopy. Before metallization, the heteroatom distribution at the polymer surface was very different in the miscible and immiscible blends. However, this distribution was modified during metallization, which was only possible via polymer‐bond breaking, leading to similar compositions at the two interfaces. Oxygen exhibited a better affinity with nickel than nitrogen, but nickel oxide and nickel nitride were both formed at the interface. Nickel nitride prevented the metal from diffusing into the substrate, playing the role of a barrier, thus driving the oxygen to the metal layer. Amorphous carbon was also detected at the interface as a new carbon species, but it did not have any significant influence on the changes induced in the distribution of heteroatoms at the polymer surfaces. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1408–1416, 2004