力电耦合偏场理论：回顾、比较与展望

力电耦合固体的非线性连续介质理论最早出现于20世纪50年代,而成熟于70年代.80年代末、90年代初则因智能材料与结构的兴起而又得到了新的发展,引起了较为广泛的关注,但应用上以线性分析为主.21世纪初以来,力电耦合软材料因其潜在的应用前景激发了众多的研究兴趣.由于牵涉到大变形,必须在一般非线性连续介质力学的框架内进行问题的建模和开展定量分析,因此力电耦合固体的非线性理论重新得到了大家的重视,出现了很多新版本.本文旨在阐述力电耦合固体非线性连续介质理论一般框架的基础上,采用3个构型的表述方式,较为详细地给出拉格朗日描述和更新拉格朗日描述下的力电耦合偏场理论,甄别不同理论表述版本之间的异同,以廓清目前文献中的混乱现象,为今后的相关研究提供理论指导.最后,本文讨论和展望了力电耦合偏场理论在不同研究领域的若干研究重点及其未来发展趋势.     

智能软材料热-电-化-力学耦合问题的研究进展

本文重点评述了自然界中的典型智能软材料:聚合物胶体和水凝胶以及关节软骨的多场耦合力学问题的国内外研究现状。基于唯象热力学理论和哈密顿原理,建立了一般性的热-电-化-力学多场耦合理论。重点针对等温过程的化学-力学耦合本构关系和控制方程,通过哈密顿原理,建立了化力耦合系统的有限元列式。证明了化学-力学耦合理论架构的封闭性。通过数值算例分析了水凝胶和关节软骨的多场耦合作用。最后展望了智能软材料多场耦合研究的未来发展趋势。      

粘接-映射混合算法及其对颗粒材料中板的振动特性分析

结构与颗粒材料相互作用广泛存在于各工程领域,其研究过程中涉及的连续-离散耦合计算方法面对诸多挑战.本文提出了粘接-映射混合算法来研究连续体与离散介质耦合动力学问题.将连续体模型划分为内部区域及与颗粒接触的边界区域.边界区域采用粘接算法模拟连续体外部形状并使用高效的球形接触判断准则;提出一种包含Rayleigh阻尼映射的有限元映射质点弹簧算法来精确计算连续体内部区域内力和变形.二者相结合构成粘接-映射混合算法,并引入计算机集群和GPU(图形处理器)并行技术,对埋没于颗粒材料中受激振动固支方板的连续-离散耦合动力学问题进行了数值仿真研究.结果表明,粘接-映射混合算法有利于双层级并行算法的程序实现及优化,并在连续-离散耦合界面进行快速接触判断的同时实现对颗粒材料中方板位移、变形、振动形态等参数的研究.通过定幅扫频和定频变幅方式考察激振力频率和幅值对振动板非线性动力学行为的影响并观察到二倍周期现象,同时给出了该连续-离散耦合系统中颗粒体系的能量耗散特性.      

Nonlinear Lamb waves in plate/shell structures

鉴于常规超声检测技术对分布式材料细微损伤和接触类结构损伤的检测效果不佳,近年来非线性超声技术逐渐引起广泛关注.超声波在板壳结构中通常以兰姆波的形式进行传播,然而由于兰姆波的频散及多模特性,使得非线性兰姆波的理论和实验研究进展缓慢.本文从经典非线性理论出发,总结了源于材料固有非线性诱发的非线性兰姆波的理论和实验两个方面的研究进展,并综述了兰姆波的二次谐波发生效应在材料损伤评价方面的若干应用;从接触声非线性理论出发,讨论了目前由于接触类结构损伤诱发的非线性兰姆波的研究现状.最后展望了非线性兰姆波的未来研究重点及发展趋势.     

电弹性体力学中的偏场方法及其应用

主要综述了当前有关叠加于偏场之上的电弹性体小位移问题的求解方法,即偏场方法.首先介绍了作为偏场方法理论基础的非线性电弹性力学理论,接着总结了偏场方法的研究进展以及受偏场作用后,电弹性梁、板、壳结构的分析方法,随后综述了偏场方法的诸多应用:其中,包括在薄壁电弹性结构屈曲分析中的应用、在记时与通信压电谐振器和基于频率漂移原理所设计的声波传感器的频率稳定性分析方面的应用、在非线性电弹性材料系数的测定以及偏场作用下电致伸缩陶瓷特征的分析等方面的应用.最后给出了该领域当前和未来的一些可能的研究课题.全文参考文献166篇.      

Effect of a biasing electric field on the propagation of symmetric Lamb waves in piezoelectric plates

This paper is concerned with the effect of a biasing electric field on the propagation of Lamb waves in a piezoelectric plate. On the basis of three dimensional linear elastic equations and piezoelectric constitutive relations, the differential equations of motion under a biasing electric field are obtained and solved. Due to the symmetry of the plate, there are symmetric and antisymmetric modes with respect to the median plane of the piezoelectric plate. According to the characteristics of symmetric modes (odd potential state) and antisymmetric modes (even potential state), the phase velocity equations of symmetric and antisymmetric modes of Lamb wave propagation are obtained for both electrically open and shorted cases. The effect of a biasing electric field on the phase velocity, electromechanical coupling coefficient, stress field and mechanical displacement of symmetric and antisymmetric Lamb wave modes are discussed in this paper and an accompanying paper respectively. It is shown that the biasing electric field has significant effect on the phase velocity and electromechanical coupling coefficient, the time delay owning to the velocity change is useful for high voltage measurement and temperature compensation, the increase in the electromechanical coupling coefficient can be used to improve the efficiency of transduction.     

虚拟飞行中气动、运动和控制耦合的数值模拟技术

随着计算机科学和计算流体力学的发展, 以非定常数值模拟为核心, 开展气动/运动/控制等多学科耦合的“数值虚拟飞行” 模拟成为可能. 数值虚拟飞行有助于飞行器设计师在设计之初和整个设计过程中分析和评估飞行器的非线性飞行力学和稳定性与控制性能. 该文综述了国内外数值虚拟飞行中“气动/运动/控制” 耦合的一体化模拟技术的研究进展, 分析了其中的关键科学和技术问题, 重点介绍了气动/运动/控制耦合一体化计算方法, 并介绍了作者在一体化耦合计算方法方面取得的进展及初步应用情况. 最后探讨了数值虚拟飞行中的一些挑战性问题, 并对未来发展趋势进行了展望. 可以预期, 随着E 级计算的到来, 在不久的将来, 数值虚拟飞行将给新型飞行器设计带来革命性的变化.      

Extensions of nondissipative continuum mechanics toward complex fluids and complex solids

Nondissipative classical continuum mechanics, in both Eulerian and Lagrangian formulations, is extended to complex fluids and complex solids. The extensions involve extra fields characterizing microstructure, preserve the Hamiltonian structure of the classical theory, and are rigorously derived from Hamiltonian formulations of the particle mechanics and statistical mechanics.     

A new material model for concrete in high-dynamic hydrocode simulations

Summary  The development of material laws for concrete subjected to highly dynamic loadings is a topic of current research. Explosive charges or high-velocity impacts produce high pressures in the kilobar region within microseconds. Hydrocode simulations by coupling of Lagrangian with Eulerian grids have been carried out, considering the interaction between explosive loading and the structure. Concrete is a composite material with a variety of inhomogenities. By homogenization of the microstructure, a macroscopic approach in the framework of continuum mechanics has been adopted. Appropriate constitutive laws that enable the nonlinear rate-dependent as well as the local damage behaviour to be modelled had to be introduced. A new damage law that describes void compaction as well as the classical theory of plasticity had been taken into account. An equation of state had to be provided to ensure the compliance with conservation laws on which hydrocodes are based. To obtain the necessary material data, experimental investigations were indispensable. Therefore, a series of field tests with specimens which were concrete slabs exposed to explosive contact charges has been conducted. Received 19 March 1999; accepted for publication 9 December 1999     

Invariant formulation of the electromechanical enthalpy function of transversely isotropic piezoelectric materials

Summary Theoretical and numerical aspects of the formulation of electromechanically coupled, transversely isotropic solids are discussed within the framework of the invariant theory. The main goal is the representation of the governing constitutive equations for reversible material behaviour based on an anisotropic electromechanical enthalpy function, which automatically fulfills the requirements of material symmetry. The introduction of a preferred direction in the argument list of the enthalpy function allows the construction of isotropic tensor functions, which reflect the inherent geometrical and physical symmetries of the polarized medium. After presenting the general framework, we consider two important model problems within this setting: i) the linear piezoelectric solid; and ii) the nonlinear electrostriction. A parameter identification of the invariant- and the common coordinate-dependent formulation is performed for both cases. The tensor generators for the stresses, electric displacements and the moduli are derived in detail, and some representative numerical examples are presented.We thank Dipl.-Ing. H. Romanowski for his support and helpful remarks.     

Theory of nonlocal asymmetric elastic solids

In this paper, a nonlinear theory of nonlocal asymmetric, elastic solids is developed on the basis of basic theories of nonlocal continuum fieM theory and nonlinear continuum mechanics. It perfects and expands the nonlocal elastic fiteld theory developed by Eringen and others. The linear theory of nonlocal asymmetric elasticity developed in [1] expands to the finite deformation, We show that there is the nonlocal body moment in the nonlocal elastic solids. The noniocal body moment causes the stress asymmetric and itself is caused by the covalent bond formed by the reaction between atoms. The theory developed in this paper is applied to explain reasonably that curves of dispersion relation of one-dimensional plane longitudinal waves are not similar with those of transverse waves.     

Influence of domain switching zones on the fracture toughness of ferroelectrics

The paper presents a fracture model for ferroelectric materials taking into account the hysteretic domain switching processes near to the tip of a macroscopic crack. The model is based on the balance of energy supplied by the driving forces, on the one hand, and the total of energies either dissipated by domain switching, stored in the crack wake region or consumed by the formation of new fracture surface, on the other hand. An internal variable theory describes the nonlinear coupled electromechanical material response within the framework of a three-dimensional continuum model. For simplicity, the complex orientation distribution function of domains in a polycrystalline ceramic is approximated by only six representative space orientations. The theory predicts certain dimensionless material parameter combinations which govern the change of fracture toughness under the application of different mechanical and electrical loadings. A comparison with data available in the literature for barium titanate ceramics yields a reasonable coincidence.     

A model for electroelastic plates under biasing fields with applications in buckling analysis

This paper presents a theoretical model for coupled extension and flexure with shear deformations of an electroelastic plate under biasing fields. The governing equations of this model, defined in the middle plane of the plates, are derived from the full three-dimensional theory of electroelasticity for small fields superposed upon finite biasing fields, under the assumption that the stress component normal to the plate vanishes identically. As examples to illustrate the applications of this model, the authors include their analysis of buckling of three plates, one single-layered plate and two double-layered plates (i.e., bimorphs) of distinct poling configurations. This analysis indicates that the electromechanical coupling strengthens the plates against buckling.