Synthesis and characterization of negative‐type photosensitive hyperbranched polyimides with excellent organosolubility from an A2 + B3 monomer system

A series of photosensitive hyperbranched polyimides (HB‐PIs) were prepared through facile end‐group modifications of the fully imidized polymer. A triamine, 1,3,5‐tris(4‐aminophenoxy)benzene, and a dianhydride, 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, were condensed with a dropwise addition method in a molar ratio of 1/2 to afford an anhydride‐terminated poly(amic acid) precursor, which was then end‐capped by 4‐aminophenol and chemically imidized to yield a phenol‐terminated HB‐PI. The modifications of the terminal phenol groups of the polyimide by acyl chloride compounds (acryloyl chloride, methylacryloyl chloride, and cinnamoyl chloride) gave the target polymers. The photosensitive HB‐PIs showed good thermal properties and excellent solubility even in low‐boiling‐point solvents at room temperature, such as acetone, 1,1,2‐trichloroethane, tetrahydrofuran, and chloroform. Photosensitive property studies revealed good photolithographic properties with a resolution greater than 3 μm and a sensitivity of 650–680 mJ/cm². © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1735–1744, 2004     

Synthesis,characterization, and thermal properties of novel arylene sulfone ether polyimides and polyamides

A new aromatic sulfone ether diamine was synthesized by nucleophilic aromatic substitution reaction of 5‐amino‐1‐naphthol with bis(4‐chlorophenyl) sulfone in the presence of potassium carbonate in a polar aprotic solvent. Polycondensation reactions of the obtained diamine with pyromellitic dianhydride (PMDA), benzophenonetetracarboxylic dianhydride (BTDA), and hexafluoroisopropylidene diphthalic anhydride (6FDA) resulted in preparation of thermally stable poly(sulfone ether imide)s. Poly(sulfone ether amide)s also were prepared by reaction of the diamine with terephthaloyl chloride (TPC) and isophthaloyl chloride (IPC). The prepared monomer and polymers were characterized by conventional methods. Physical and mechanical properties of polymers, including thermal stability, thermal behavior, solution viscosity, solubility behavior, and modulus, also were studied. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1487–1492, 2000     

Synthesis and characterization of soluble polyimides derived from 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride

A novel bis(ether anhydride) monomer, 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide ion of 2′,5′‐dihydroxy‐p‐terphenyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and cyclodehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s bearing laterally attached p‐terphenyl groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal or chemical imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were in the range of 0.62–1.26 dL/g. Most of the poly(ether imide)s obtained from both routes were soluble in polar organic solvents, such as N,N‐dimethylacetamide. All the poly(ether imide)s could afford transparent, flexible, and strong films with high tensile strengths. The glass‐transition temperatures of these poly(ether imide)s were recorded as between 214 and 276 °C by DSC. The softening temperatures of all the poly(ether imide) films stayed in the 207–265 °C range according to thermomechanical analysis. For all the polymers significant decomposition did not occur below 500 °C in nitrogen or air atmosphere. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1008–1017, 2004     

Synthesis of autophotosensitive hyperbranched polyimides based on 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride and 1,3,5‐tris(4‐aminophenoxy)benzene via end capping of the terminal anhydride groups by ortho‐alkyl aniline

Benzophenone‐containing, anhydride‐terminated hyperbranched poly(amic acid)s were end‐capped by ortho‐alkyl aniline in situ and then chemically imidized, yielding autophotosensitive hyperbranched polyimides. The polyimides were soluble in strong polar solvents, such as N‐methyl‐2‐pyrrolidone, N‐dimethylformamide, dimethylacetamide, and dimethyl sulfoxide. Thermogravimetric analysis revealed their excellent thermal stability, with a 5 wt % thermal loss temperature in the range of 527–548 °C and a10 wt % thermal loss temperature in the range of 562–583 °C. The strong absorption of the polyimide films in ultraviolet–visible spectra at 365 nm indicated that the hyperbranched polyimides were patternable. Highly resolved images with a line width of 6 μm were developed by ultraviolet exposure of the polymer films. A well‐defined image with lines as thin as 3 μm was also patterned, but the lines were rounded at the edges. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2026–2035, 2003     

Poly(ether imide)s derived from phthalazinone‐containing dianhydrides

An unsymmetrical and noncoplanar heterocyclic dianhydride was synthesized from a bisphenol‐like phthalazinone, 4‐(4‐hydroxylphenyl)‐2,3‐phthalazin‐1‐one, and a series of novel poly(ether imide)s based on it, with intrinsic viscosities of 0.67–1.42 dL/g, were obtained by one‐step solution polymerization in m‐cresol at 200 °C for 20 h. The polymers were readily soluble in N‐methyl‐2‐pyrrolidinone and m‐cresol. The poly(ether imide)s derived from 4,4′‐oxydianiline and 4,4′‐methylenedianiline were also very soluble in chloroform, 1,1′,2,2′‐tetrachloroethane, and N,N‐dimethylacetamide. The glass‐transition temperatures were 289–326 °C, as determined by differential scanning calorimetry. All the degradation temperatures for 5% weight loss occurred above 482 °C in nitrogen. The tensile strength of thin films of some of the polymers varied from 103.1 to 121.4 MPa. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6089–6097, 2004     

Synthesis of alkaline‐developable,photosensitive hyperbranched polyimides through the reaction of carboxylic acid dianhydrides and trisamines

Hyperbranched polyimides (HBPI)s with high glass‐transition temperatures and excellent thermal stability were synthesized through the reaction of commercially available carboxylic acid dianhydrides with tris[4‐(4‐aminophenoxy)phenyl]ethane (TAPE). In particular, hyperbranched polyimide HBPI(TAPE‐DSDA), prepared through the reaction of TAPE with 3,3′,4,4′‐diphenylsulfonetetracarboxylic dianhydride (DSDA), showed higher thermal stability and good solubility. Furthermore, alkaline‐developable, photosensitive HBPI(TAPE‐DSDA)‐MA‐CA was prepared through the reaction of HBPI(TAPE‐DSDA) with glycidyl methacrylate with tetrabutylammonium bromide as a catalyst in N‐methyl‐2‐pyrrolidinone (NMP) followed by the addition reaction of cis‐1,2,3,6‐tetrahydrophthalic anhydride with triphenylphosphine as a catalyst in NMP. The glass‐transition temperatures of HBPI(TAPE‐DSDA)‐MA‐CA were greater than 300 °C. A resist composed of 74 wt % HBPI(TAPE‐DSDA)‐MA‐CA, 22.2 wt % trimethylpropane triacrylate, and 3.8 wt % Irgacure 907 as a photoinitiator achieved a resolution of a 55‐μm line pattern and a 275‐μm space pattern by UV irradiation (1000 mJ/cm²). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3697–3707, 2004     

Synthesis,characterization, and thermal properties of piezoelectric polyimides

Three amorphous piezoelectric polyimides have been synthesized and characterized to analyze their utility for high‐temperature applications. The studied polyimides have been prepared from 4,4′‐oxydiphthalic anhydride and the diamines 2,4‐di(3‐aminophenoxy)benzonitrile (poly2‐4), 2,6‐bis(3‐aminophenoxy)benzonitrile (poly2‐6), and 1,3‐bis‐2‐cyano‐3‐(3‐aminophenoxy)phenoxybenzene (poly2CN). These polyimides differ in the position of the dipolar groups ? CN in the aromatic ring (poly2‐4 and poly2‐6) and in the number of these groups in the repetitive unit (poly2‐6 and poly2CN). The imidization degree has been studied by Fourier transform infrared (FTIR) and thermogravimetry‐mass spectrometry (TG‐MS) and thermal properties by differential scanning calorimetry (DSC) and thermogravimetry (TG). The piezoelectric behavior has been analyzed from remnant polarization measurements. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 722–730, 2009     

Synthesis and properties of poly(ether imide)s based on a benzonorbornane bis(ether anhydride)

A novel bis(ether anhydride) monomer, 3,6‐bis(3,4‐dicarboxyphenoxy)benzonorbornane dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile with 3,6‐dihydroxybenzonorbornane in the presence of potassium carbonate, followed by the alkaline hydrolysis of the intermediate bis(ether dinitrile) and the cyclodehydration of the resulting bis(ether diacid). A series of poly(ether imide)s bearing pendant norbornane groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were 0.81–1.81 dL/g. The poly(ether imide) with m‐phenylenediamine as a diamine showed good organosolubility. Most of the cast poly(ether imide) films have had high tensile strengths and moduli. The glass‐transition temperatures of these poly(ether imide)s, except for those from rigid p‐phenylenediamine and benzidine, were recorded between 211 and 246 °C by differential scanning calorimetry. The softening temperatures of all the poly(ether imide) films stayed within 210–330 °C according to thermomechanical analysis. No polymers showed significant decomposition before 500 °C in a nitrogen or air atmosphere. A comparative study of the properties with the corresponding poly(ether imide)s without pendant substituents was also made. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1712–1725, 2002     

Synthesis and characterization of novel hyperbranched poly(imide silsesquioxane) membranes

A new family of hyperbranched polymers with chemical bonds between the hyperbranched polyimide and polysilsesquioxane network was synthesized by the reaction of an amine‐terminated aromatic hyperbranched polyimide with 3‐glycidoxypropyl trimethoxysilane, followed by hydrolysis and polycondensation in the presence of an acid catalyst. The hyperbranched poly(imide silsesquioxane) membranes were fabricated by the casting the aforementioned polymer solution onto a NaCl optical flat, which was followed by heating at 80 °C for 24 h. The membranes were characterized by Fourier transform infrared, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, N₂ adsorption and desorption, and CO₂ adsorption and desorption. The presence of covalent bonds between the hyperbranched polyimide and polysilsesquioxane segments had a significant effect on the properties of the membranes. N₂ adsorption–desorption isotherms for these membranes showed surface areas of 6–16 m²/g, whereas CO₂ adsorption–desorption isotherms showed much higher surface areas in the range of 106–127 m²/g. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3736–3743, 2003     

Synthesis and properties of new adamantane‐based poly(ether imide)s

A new adamantane‐based bis(ether anhydride), 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]adamantane dianhydride, was prepared in three steps starting from nitrodisplacement of 4‐nitrophthalonitrile with the potassium phenolate of 2,2‐bis(4‐hydroxyphenyl)adamantane. A series of adamantane‐containing poly(ether imide)s were prepared from the adamantane‐based bis(ether anhydride) and aromatic diamines by a conventional two‐stage synthesis in which the poly(ether amic acid)s obtained in the first stage were heated stage‐by‐stage at 150–270°C to give the poly(ether imide)s. The intermediate poly(ether amic acid)s had inherent viscosities between 0.56 and 1.92 dL/g. Except for those from p‐phenylenediamine, m‐phenylenediamine, and benzidine, all the poly(ether amic acid) films could be thermally converted into transparent, flexible, and tough poly(ether imide) films. All the poly(ether imide)s showed limited solubility in organic solvents, although they were amorphous in nature as evidenced by X‐ray diffractograms. Glass transition temperatures of these poly(ether imide)s were recorded in the range of 242–317°C by differential scanning calorimetry and of 270–322°C by dynamic mechanical analysis. They exhibited high resistance to thermal degrdation, with 10% weight loss temperatures being recorded between 514–538°C in nitrogen and 511–527°C in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1619–1628, 1999     

Synthesis and characterization of new soluble aromatic polyimides from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and aromatic tetracarboxylic dianhydrides

Novel aromatic polyimides containing tetraphenylpyrrole unit were synthesized from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polymers had inherent viscosities in the 0.20–0.65 dL/g range and were practically amorphous as shown by the X-ray diffraction studies. All the polyimides except for polypyromellitimide were easily soluble in a wide range of organic solvents such as o-chlorophenol, pyridine, 1,3-dimethyl-2-imidazolidone, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone at room temperature. These polyimides had high glass transition temperatures of 302–359°C and exhibited 10% weight loss at temperatures above 510°C in nitrogen.     

Synthesis and properties of hyperbranched polyimides derived from novel triamine with prolonged chain segments

Novel pyridine‐containing hyperbranched polyimides (HBPIs) were synthesized by using a new triamine 2,4,6‐tris[3‐(4‐aminophenoxy)phenyl]pyridine with prolonged chain segments, ether linkage and meta‐linked units as a BB′₂‐like monomer, various commercial aromatic dianhydrides as A₂ monomers. Most of the obtained HBPIs were readily soluble in common organic solvents such as N,N‐dimethylformamide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidone, m‐Cresol, and so forth. Meanwhile, they also had good thermal stability with the glass transition temperatures (T_gs) all above 210 °C, the temperature at 10% weight loss of 537.1–574.4 °C in nitrogen atmosphere. Strong and flexible HBPI films were obtained, which had good mechanical properties with tensile strengths of 83.3–95.8 MPa, tensile modulus of 1.82–2.43 GPa and elongations at break of 4.84–6.98%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2425–2437     

Synthesis of hyperbranched poly(ether nitrile)s by one‐step polycondensation of an AB2 monomer

Hyperbranched poly(ether nitrile)s were prepared from a novel AB₂ type monomer, 2‐chloro‐4‐(3,5‐dihydroxyphenoxy)benzonitrile, via nucleophilic aromatic substitution. Soluble and low‐viscous hyperbranched polymers with molecular weights upto 233,600 (M_w) were isolated. According to the ¹H NMR and GPC data, the unique polymerization behavior was observed, which implies that the weight average molecular weight increased after the number average molecular weight reached plateau region. Model compounds were prepared to characterize the branching structure. Spectroscopic measurements of the model compounds and the resulting polymers, such as ¹H, DEPT ¹³C NMR, and MS, strongly suggest that the ether exchange reaction and cyclization are involved in the propagation reaction. The side reactions would affect the unique polymerization behavior. The resulting polymers showed a good solubility in organic solvents similar to other hyperbranched aromatic polymers. The hydroxy‐terminated polymer was even soluble in basic water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5835–5844, 2009     

Synthesis and characterization of phthalazinone containing poly(arylene ether)s via a novel N–C coupling reaction

High‐molecular‐weight poly(phthalazinone)s with very high glass‐transition temperatures (T_g's) were synthesized via a novel N–C coupling reaction. New bisphthalazinone monomers ( 7a–e ) were synthesized from 2‐(4‐chlorobenzoyl) phthalic acid in two steps. Poly(phthalazinone)s, having inherent viscosities in the range of 0.34–0.91 dL/g, were prepared by the reaction of the bis(phthalazinone) monomers with an activated aryl halide in a dipolar aprotic solvent in the presence of potassium carbonate. The poly(phthalazinone)s exhibited T_g's greater than 230 °C. polymer 8b synthesized from diphenyl biphenol and bis(4‐flurophenyl) sulfone demonstrated the highest T_g of 297 °C. Thermal stabilities of the poly(phthalazinone)s were determined by thermogravimetric analysis. All the poly(phthalazinone)s showed a similar pattern of decomposition with no weight loss below 450 °C in nitrogen. The temperatures of 5% weight loss were observed to be about 500 °C. The poly(phthalazinone)s containing 4,4′‐isopropylidenediphenol and 4,4′‐(hexafluoroisopropylidene) diphenol and diphenyl ether linkage were soluble in chlorinated solvents such as chloroform. Other poly‐(phthalazinone)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(phthalazinone)s can be cast as flexible films from solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2481–2490, 2003     

Synthesis and characterization of new fluorene‐based poly(ether imide)s

A novel bis(ether anhydride) monomer, 9,9‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]fluorene dianhydride (4), was synthesized from the nitrodisplacement of 4‐nitrophthalonitrile by the bisphenoxide ion of 9,9‐bis(4‐hydroxyphenyl)fluorene (1), followed by alkaline hydrolysis of the intermediate tetranitrile and dehydration of the resulting tetracarboxylic acid. A series of poly(ether imide)s bearing the fluorenylidene group were prepared from the bis(ether anhydride) 4 with various aromatic diamines 5a–i via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s 6a–i followed by thermal cyclodehydration to the polyimides 7a–i. The intermediate poly(amic acid)s had inherent viscosities in the range of 0.39–1.57 dL/g and afforded flexible and tough films by solution‐casting. Except for those derived from p‐phenylenediamine, m‐phenylenediamine, and benzidine, all other poly(amic acid) films could be thermally transformed into flexible and tough polyimide films. The glass transition temperatures (T_g) of these poly(ether imide)s were recorded between 238–306°C with the help of differential scanning calorimetry (DSC), and the softening temperatures (T_s) determined by thermomechanical analysis (TMA) stayed in the range of 231–301°C. Decomposition temperatures for 10% weight loss all occurred above 540°C in an air or a nitrogen atmosphere. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1403–1412, 1999     

Synthesis and evaluation of novel polyimides derived from spirobichroman diether anhydride

A spirobichroman structure-containing diether anhydride (SBCDA), 6,6′-bis(3,4-dicarboxyphenoxy)-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman dianhydride, was prepared by the nucleophilic nitrodisplacement of 4-nitrophthalonitrile with the phenolate ion of 6,6′-dihydroxy-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman, followed by alkaline hydrolysis of the intermediate tetranitrile and dehydration of the resulting tetraacid. A series of high molecular weight poly(ether imide)s with inherent viscosities between 0.45 and 1.28 dL/g were synthesized from SBCDA and various aromatic diamines via a conventional two-stage procedure that included ring-opening polyaddition in N,N-dimethylacetamide (DMAc) to give poly(amic acid)s, followed by thermal cyclization to poly(ether imide)s. The intermediate poly(amic acid)s had inherent viscosities of 0.70–1.50 dL/g. Except for the poly(ether imide) obtained from p-phenylenediamine, the other poly(ether imide)s were soluble in various organic solvents and could be solution-cast into transparent, flexible, and tough films. These poly(ether imide)s had glass transition temperatures in the range 175–262°C and showed no significant decomposition below 420°C, with 10% weight loss being recorded above 446°C in nitrogen or air. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2801–2809, 1997     

Synthesis and evaluation of photoluminescent and electrochemical properties of new aromatic polyamides and polyimides with a kink 1,2‐phenylenediamine moiety

A series of novel triphenylamine‐containing aromatic polyamides and polyimides having a crank and twisted noncoplanar structures were synthesized in inherent viscosities of 0.14–0.64 dL/g and 0.11–0.67 dL/g, respectively. These polymers had useful levels of thermal stability associated with relatively high glass‐transition temperatures (174–311 °C). They exhibited strong UV–Vis absorption bands at around 300 nm in NMP solutions. The PL spectra of these polymers in NMP solutions (1 × 10^?5 M) showed maximum peaks around 396–479 nm. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. Cyclic voltammetry (CV) of the polymer films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited two reversible oxidation redox couples at potentials of 0.70–1.01 V and 1.10–1.46 V, respectively, vs. Ag/AgCl in acetonitrile solution. The polymer films revealed electrochromic characteristics, with a color change from neutral pale yellowish to green and then to a blue oxidized form at applied potentials ranging from 0.00 to 1.75 V. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2587–2603, 2006     

Synthesis and properties of organosoluble poly(amide imide imide)s based on tetraimide dicarboxylic acid condensed from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline,and trimellitic anhydride and various aromatic diamines

A novel tetraimide dicarboxylic acid was synthesized with the ring‐opening addition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline, and trimellitic anhydride in a 1/2/2 molar ratio in N‐methyl‐2‐pyrrolidone followed by azeotropic condensation to tetraimide dicarboxylic acid. A series of poly(amide imide imide)s (PAIIs) with inherent viscosities of 0.8–1.1 dL/g were prepared from tetraimide dicarboxylic acid with various aromatic diamines by direct polycondensation. Most of the PAIIs were readily soluble in a variety of amide polar solvents and even in less polar m‐cresol and pyridine. Solvent‐cast films had tensile strengths ranging from 99 to 106 MPa, elongations at break ranging from 8 to 13%, and initial moduli ranging from 2.0 to 2.3 GPa. The glass‐transition temperatures of these PAIIs were recorded at 244–276 °C. They had 10% weight losses at temperatures above 520 °C in air or nitrogen atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1092–1102, 2002     

Synthesis and properties of hyperbranched polyurethanes,hyperbranched polyurethane copolymers with and without ether and ester groups using blocked isocyanate monomers

Starting from 3,5‐diamino benzoic acid, 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzyl ether, an AB₂‐type blocked isocyanate monomer with flexible ether group, and 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzoate, an AB₂‐type blocked isocyanate monomer with ester group, were synthesized for the first time. Using the same starting compound, 3,5‐bis{(benzoxycarbonyl)imino}benzylalcohol, an AB₂‐type blocked isocyanate monomer, was synthesized through a highly efficient short‐cut route. Step‐growth polymerization of these monomers at individually optimized experimental conditions results in the formation of hyperbranched polyurethanes with and without ether and ester groups. Copolymerizations of these monomers with functionally similar AB monomers were also carried out. The molecular weights of the polymers were determined using GPC and the values (M_w) were found to vary from 1.5 × 10⁴ to 1.2 × 10⁶. While hyperbranched polyurethanes having no ether or ester group were found to be thermally stable up to 217 °C, hyperbranched poly(ether–urethane)s and poly(ester–urethane)s were found to be thermally stable up to 245 and 300 °C, respectively. Glass transition temperature (T_g) of polyurethane was reduced significantly when introducing ether groups into the polymer chain, whereas T_g was not observed even up to 250 °C in the case of poly(ester–urethane). Hyperbranched polyurethanes derived from all the three different AB₂ monomers were soluble in highly polar solvents and the copolymers showed improved solubility. Polyethylene glycol monomethyl ether of molecular weight 550 and decanol were used as end‐capping groups, which were seen to affect the thermal, solution, and solubility properties of polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3877–3893, 2007     

Synthesis and properties of ortho‐linked aromatic polyimides based on 1,2‐bis(4‐aminophenoxy)‐4‐tert‐butylbenzene

A bis(ether amine) containing the ortho‐substituted phenylene unit and pendant tert‐butyl group, 1,2‐bis(4‐aminophenoxy)‐4‐tert‐butylbenzene, was synthesized and used as a monomer to prepare polyimides with six commercial dianhydrides via a conventional two‐stage procedure. The intermediate poly(amic acid)s had inherent viscosities of 0.78–1.44 dL/g, and most of them could be thermally converted into transparent, flexible, and tough polyimide films. The inherent viscosities of the resulting polyimides were in the range of 0.46–0.87 dL/g. All polyimides were noncrystalline, and most of them showed excellent solubility in polar organic solvents. The glass‐transition temperatures of these polyimides were in the range of 222–259 °C in differential scanning calorimetry and 212–282 °C in thermomechanicl analysis. These polyimides showed no appreciable decomposition up to 500 °C in thermogravimetric analysis in air or nitrogen. A comparative study of the properties with the corresponding polyimides without pendant tert‐butyl groups derived from 1,2‐bis(4‐aminophenoxy)benzene is also presented. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1551–1559, 2000