Silicon‐methoxide‐modified clays and their polystyrene nanocomposites

Silicon‐methoxide‐containing modified clays were obtained through cationic exchange between the sodium clay and the ammonium cation of [3‐(trimethoxysilyl)propyl]octadecyldimethylammonium chloride (Si18). The nanocomposites were prepared through bulk polymerization of styrene in which the Si18 clay was dispersed. The silicon‐methoxide offers the possibility of reaction between the methoxide and a clay hydroxyl group to link together the cation and the clay. The nanocomposites were characterized by X‐ray diffraction, transmission electron microscopy, and atomic force microscopy. Their thermal stability and flame retardancy were measured by thermogravimetric analysis (TGA) and cone calorimetry. Linkage between the silicon and the clay apparently occurs in the clay but is not likely to occur in the nanocomposite, perhaps because of the presence of the polystyrene spreading the distance between the reactive sites, which makes reaction more difficult. The results from TGA and cone calorimetry were similar to those obtained with other nanocomposites. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1498–1503, 2002     

Synthesis of lipo‐glycopolymer amphiphiles by nitroxide‐mediated living free‐radical polymerization

The nitroxide‐mediated living free‐radical polymerization of 1,2,5,6‐di(isopropylidene)‐D ‐glucose‐2‐propenoate was achieved in dimethylformamide at 105 °C with an α‐hydrido alkoxyamine initiator functionalized with a lipophilic N,N‐di(octadecyl)amine group. The kinetics of the polymerization were investigated, and the mechanism was shown to be a living process allowing, after hydrolysis, controlled molecular weight, low‐polydispersity lipo‐glycopolymers to be prepared. The amphiphilic character of the macromolecule could be altered by either the exchange of the alkoxyamine at the chain end with hydrogen or the preparation of copolymers with lipophilic monomers such as N,N‐di(octadecyl)acrylamide. The surface and membrane‐forming properties of these novel lipopolymers demonstrate their amphiphilic character. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3379–3391, 2002     

Synthesis of multihydroxyl branched polyethers by cationic copolymerization of 3,3‐bis(hydroxymethyl)oxetane and 3‐ethyl‐3‐(hydroxymethyl)oxetane

The cationic ring‐opening polymerization of 3,3‐bis(hydroxymethyl)oxetane (BHMO) and the copolymerization of BHMO with 3‐ethyl‐3‐(hydroxymethyl)oxetane (EOX) were studied. Medium molecular weight polymers (number‐average molecular weight ≈ 2 × 10³) were obtained in bulk polymerization. Poly[3,3‐bis(hydroxymethyl)oxetane], as highly insoluble, was only characterized by gel permeation chromatography and NMR methods in the esterified form. Copolymers of BHMO and EOX that were slightly soluble in organic solvents were characterized in more detail. In a copolymerization from a 1:1 mixture, the comonomers were consumed at equal rates. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis confirmed that a random 1:1 copolymer was formed. ¹³C NMR analysis indicated that in contrast to previously described homopolymers of EOX in which the degree of branching was limited, the homopolymers of BHMO were highly branched. This pattern was preserved in the copolymers; EOX units were predominantly linear, whereas BHMO units were predominantly branched. The copolymerization of BHMO with EOX provides, therefore, a route to multihydroxyl branched‐polyethers with various degrees of branching containing ? OH groups exclusively as ≡C? CH₂? OH units. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1991–2002, 2002     

Synthesis of comb‐shaped poly(methyl methacrylate)‐b‐poly(polytetrahydrofuran acrylate) under 60Co γ‐ray irradiation

Comb‐shaped graft copolymers with poly(methyl methacrylate) as a handle were synthesized by the macromonomer technique in two steps. First, polytetrahydrofuran acrylate (A‐PTHF), prepared by the living cationic ring‐opening polymerization of tetrahydrofuran, underwent homopolymerization with 1‐(ethoxycarbonyl)prop‐1‐yl dithiobenzoate as an initiator under ⁶⁰Co γ irradiation at room temperature; Second, the handle of the comb‐shaped copolymers was prepared by the block copolymerization of methyl methacrylate with P(A‐PTHF) as a macroinitiator under ⁶⁰Co γ irradiation. The two‐step polymerizations were proved to be controlled with the following evidence: the straight line of ln[M]₀/[M] versus the polymerization time, the linear increase in the number‐average molecular weight with the conversion, and the relatively narrow molecular weight distribution. The structures of the P(A‐PTHF) and final comb‐shaped copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3367–3378, 2002     

Synthesis and characterization of difluor‐aniline polymers

Undoped and chlorine doped difluoraniline polymers (PDFA) were synthesized and characterized to study the electric behavior of polyanilines with three different fluorine disubstitutions in the benzene rings that could produce polarizable molecules. The structures of the resulting polymers were studied by infrared spectroscopy focusing in the oxidation degree in the polymers. A discussion of the molecular weight of PDFAs as measured by light scattering in different solvents is presented, since the polymers form aggregates depending on the solvent used, the position of the fluorine substitutions, the doping level and the temperature. The aggregates in polarizable polymer solutions can produce wrong estimations in the molecular weight if the influence of temperature is not considered. The PDFAs thermal and electroconductivity analysis also showed dependence on the position of the fluorine substitutions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2130–2136, 2002     

1,4‐Addition polymerization of 1,4‐bis(4‐benzylpyridinium)butadiyne triflate in a dipolar aprotic solvent

1,4‐Bis(4‐benzylpyridinium)butadiyne triflate was aggregated in dimethylformamide and spontaneously converted into the 1,4‐addition type of polydiacetylene. The polymerization took place in a dipolar aprotic solvent with a large dielectric constant that could enhance the aggregation of the ionic diacetylene salt through the electrostatic interaction. The molecular weight of the diacetylene was leveled off after 30 h at 80 °C to reach 1.5 × 10⁴ (number‐average molecular weight) that consisted of the 1,4‐addition type of polydiacetylene similar to polydiacetylenes obtained in the conventional solid‐state polymerization. Electron spin resonance spectra revealed that diradicals were generated at the earlier state aggregation to give rise to a solution polymerization. The UV spectra also suggested the presence of the activated aggregation associated with the polymerization as well as the eximer emission spectra. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3534–3541, 2002     

Grafting of polycaprolactone onto poly(ethylene‐co‐vinyl alcohol) and application to polyethylene‐based bioerodable blends

Poly(ethylene‐co‐vinyl acetate) (EVA) powders containing 10 and 20 wt % of vinyl acetate (VAc) units was saponified in ethanol/KOH solution in a heterogeneous manner. Intermolecular interaction between vinyl alcohol(VOH) units in the produced poly(ethylene‐co‐vinyl alcohol) (EVOH) promoted the crystallization of intervening segments composed of ethylene units. Ring opening polymerization of caprolactone (CL) in the presence of EVOH gave EVOH‐g‐PCL graft copolymers with relatively short chain branches. Even though the graft copolymerization was carried out in a homogeneous solution, all the VOH units were not equally reactive for the PCL grafting. And the unreacted VOH units decreased very slowly with the graft copolymerization time. EVOH‐g‐PCL decreased the domain size of the dispersed phase in low density polyethylene (PE)/biodegradable master batch (MB) blends, and thus increased their tensile properties significantly. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2561–2569, 2002     

Application of ketenes to well‐defined polyester synthesis (4): End‐capping reactions in living anionic polymerization of ethylphenylketene

End‐capping reactions of a living polyester, obtained by anionic polymerization of ethylphenylketene (EPK), were carried out. As end‐capping reagents, electrophiles such as alkyl halide and acyl halide were successfully used. Reactivity of the terminal enolate and the resulting terminal structures were elucidated by model reactions, using lithium enolates having low molecular weights, obtained by an equimolar reaction of EPK with butyllithium. Polymerization of EPK by lithium alkoxide and the subsequent end‐capping reaction afforded the corresponding polyester having functional groups at both chain ends and a narrow molecular weight distribution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3103–3111, 2002     

(Thiocarbonyl‐α‐thio)carboxylic acid derivatives as transfer agents in reversible addition–fragmentation chain‐transfer polymerizations

Ethyl S‐(thiobenzoyl)thioacetate, ethyl S‐thiobenzoyl‐2‐thiopropionate, and S‐(thiobenzoyl)thioglycolic acid were used as chain‐transfer agents for the reversible addition–fragmentation chain‐transfer (RAFT) polymerizations of styrene, methyl methacrylate, and butyl acrylate. Of these polymerizations, only those of styrene and butyl acrylate with any of the transfer agents showed molecular weight control corresponding to controlled/living polymerizations. The best molecular weight control was observed for the polymerizations of styrene and butyl acrylate with ethyl (S)‐thiobenzoyl‐2‐thiopropionate. Semiempirical PM3 calculations were performed for the investigation of the relative heats of reaction of the chain‐transfer equilibria between the aforementioned chain‐transfer agents and dimer radicals of the three monomers. The molecular weight control of the polymerizations correlated with the stability trend of the leaving‐group radical of the chain‐transfer agent. This relatively simple computational model offered some value in determining which transfer agents would show the best molecular weight control in RAFT polymerizations. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 555–563, 2002; DOI 10.1002/pola.10143     

Preparation of a copolymer of methyl methacrylate with a new monomer, 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate,and its initiation of the graft copolymerization of styrene with a controlled radical mechanism

A copolymer [P(MMA‐co‐TBPM)] was prepared by the radical polymerization of methyl methacrylate (MMA) and 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate (TBPM) with azobisisobutyronitrile as an initiator. TBPM was a new monomer containing an activated ester. Both the copolymer and TBPM were characterized with NMR, IR, and gel permeation chromatography in detail. It was confirmed that P(MMA‐co‐TBPM) could initiate the graft polymerization of styrene by the cleavage of the activated ester of the TBPM segment. This process was controllable, and the molecular weight of the graft chain of polystyrene increased with the increment of conversion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4398–4403, 2002     

Maleation of poly(3,4‐epoxy‐1‐butene) for accelerated crosslinking in the presence of a redox catalyst

Accelerated crosslinking of novel poly(3,4‐epoxy‐1‐butene) (3,4‐PEPB) oligomers in the presence of a cobalt‐based redox catalyst was investigated. Previous studies using model compounds, 3,4‐dimethoxy‐1‐butene and 1,4‐dimethoxy‐2‐butene, suggested that maleation of hydroxyl‐terminated 3,4‐PEPB oligomers would result in more rapid crosslinking in thin films. Novel maleated oligomers offered a unique combination of both electron‐rich and electron‐poor olefinic sites, and quantitative maleation significantly increased the crosslinking rate of 3,4‐PEPB. Efficient copolymerization between terminal maleate groups and olefinic groups in the repeating unit was proposed to account for accelerated crosslinking rates. Furthermore, the addition of novel reactive diluents, such as maleic acid mono‐ethyl ester, also effectively improved the 3,4‐PEPB crosslinking rate. Sol fraction measurements as a function of coating thickness revealed that the crosslinking rate versus oxygen diffusion was less significant for the maleated oligomers because of the presence of reactive electron‐poor olefins. Sol fractions were constant for catalyst concentrations greater than 0.25–0.50 wt % (as compared with oligomer feed). This observation suggested that a redox process was not a dominant factor in determining crosslinking rates at various experimental conditions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2789–2798, 2002     

Structural polymorphism in poly(dodecamethylen‐di‐O‐methyl‐L‐tartaramide)

Structural characterization of poly(dodecamethylen‐di‐O‐methyl‐L‐tartaramide) was carried out with optical microscopy, thermal analysis, X‐ray diffraction, and electron microscopy. Two different crystalline forms were found in accordance with the thermograms, powder and fiber X‐ray diffraction diagrams. The electron microscopy allows corroboration of the morphological and crystallographic differences. Molecular modeling was used to conclude the structural analogies and differences between the two crystalline forms that were related to the chain packing and orientation in the crystal cell, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2523–2530, 2002     

Synthesis and structural analysis of functionalized poly (ϵ‐caprolactone)‐based three‐arm star polymers

Hydroxyl‐functionalized three‐arm poly(?‐caprolactone)s (PGCL‐OHs) were synthesized by the ring‐opening polymerization of ?‐caprolactone in the presence of glycerol (as the core) and stannous octoate. The effect of the feed ratio of ?‐caprolactone to glycerol on the ring‐opening polymerization was studied. These three‐arm PGCL‐OHs were then converted into double‐bond‐functionalized three‐arm poly(?‐caprolactone)s (PGCL‐Mas) by the reaction of PGCL‐OH with maleic anhydride in the melt at 130 °C. The quantitative conversion of hydroxyl functionality was achieved at a low molecular weight. The resulting PGCL‐OH and PGCL‐Ma were characterized with gel permeation chromatography, Fourier transform infrared, ¹H NMR, ¹³C NMR, and differential scanning calorimetry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1127–1141, 2002     

Effects of clay‐modifying agents on the morphology and properties of poly(methyl methacrylate)/clay nanocomposites synthesized via γ‐ray irradiation polymerization

Via γ‐ray irradiation polymerization, poly(methyl methacrylate) (PMMA)/clay nanocomposites were successfully prepared with reactive modified clay and nonreactive clay. With reactive modified clay, exfoliated PMMA/clay nanocomposites were obtained, and with nonreactive clay, intercalated PMMA/clay nanocomposites were obtained. Both results were confirmed by X‐ray diffraction and high‐resolution transmission electron microscopy. PMMA extracted from PMMA/clay nanocomposites synthesized by γ‐ray irradiation had higher molecular weights and narrow molecular weight distributions. The enhanced thermal properties of the PMMA/clay nanocomposites were characterized by thermogravimetric analysis and differential scanning calorimetry. The improved mechanical properties of PMMA/clay were characterized by dynamic mechanical analysis. In particular, the enhancement of the thermal properties of the PMMA/clay nanocomposites with reactive modified clay was much more obvious than that of the PMMA/clay nanocomposites with nonreactive clay. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3218–3226, 2003     

Temperature dependence of the phase separation in ethyl cyanoethyl cellulose/poly(acrylic acid)/4′‐n‐pentyl‐4‐cyano‐biphenyl composite films

A novel polymer‐dispersed liquid‐crystal film consisting of micrometer‐scale liquid‐crystal droplets in ultraviolet‐cured polymer composite matrices with cholesteric order was prepared and the influence of cure temperature on the phase separation was studied. The existence and pitch of the ethyl cyanoethyl cellulose cholesteric liquid‐crystalline phase were influenced by the existence of low molecular weight liquid crystals. The macromolecular cholesteric phase disappeared when the 4′‐n‐pentyl‐4‐cyano‐biphenyl concentration was over 40 wt %, and 4′‐n‐pentyl‐4‐cyano‐biphenyl domains were dispersed in the isotropic matrix of the polymer composite. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1334–1341, 2002     

Diffusion mobility of reactants,phase equilibrium,and specific features of radical copolymerization kinetics in the nonyl acrylate/2‐methyl‐5‐vinyltetrazole system

Combined analysis of experimental data on monomer diffusion, phase equilibrium, and copolymerization kinetics in systems of monomers (nonyl acrylate and 2‐methyl‐5‐vinyltetrazole) as well as their copolymers and homopolymers was carried out. The composition of the mixture in the vicinity of the growing macroradical can differ significantly from the average composition in the whole reactor volume because of consumption of the more‐reactive reactant 2‐methyl‐5‐vinyltetrazole. Nonyl acrylate exhibited limited compatibility with copolymers enriched in 2‐methyl‐5‐vinyltetrazole and its homopolymer. Phase diagrams were obtained for the latter homopolymer. The concentration plots of the diffusion coefficients of both monomers in their copolymers of various compositions were determined. Microphase separation was observed at specific conversions in the reaction system where the composition of a copolymer and its concentration in a monomer solution approached the binodal of the phase diagram. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1383–1389, 2002     

Synthesis of novel nitrogen‐ and sulfur‐containing conjugated polymers used as hole‐transporting materials for organic light‐emitting diodes

Two series of highly soluble novel nitrogen‐ and sulfur‐containing conjugated polymers were synthesized via an acid‐induced self‐polycondensation of functional monomers with methyl sulfinyl and aromatic groups. The well‐defined structures of synthesized polymers were confirmed by their NMR and IR spectra. The highest occupied molecular orbital energy values for these materials, estimated by cyclic voltammetry, showed a broad range of values from about 5.0 to 5.2 eV used as hole‐transport layers (HTL) in two‐layer light‐emitting diodes ITO/HTL/Alq₃/Mg:Ag [ITO = indium tin oxide, and Alq₃ = tris(8‐quinolinato) aluminum]. The typical turn‐on voltage of these diodes was about 4–5 V. The maximum brightness of the device was about 3440 cd/m² at 20 V. The maximum efficiency was estimated to be 0.15 lm/W at 10 V. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1321–1333, 2002     

Synthesis of poly(p‐phenylene vinylene)‐ and poly(phenylene ethynylene)‐based polymers containing p‐terphenyl in the main chain with alkoxyphenyl side groups

Starting from the pyrylium salt and following a facile synthetic route, we synthesized and polymerized 4,4″‐diiodo‐2′,6′‐di[4‐(2′‐ethylhexyl)oxy]phenyl‐p‐terphenyl with p‐divinylbenzene or p‐diethynylbenzene. The resulting polymers had moderate molecular weights, were amorphous, and dissolved in tetrahydrofuran and chloroform, with glass‐transition temperatures of 120–131 °C. The polymers behaved as violet‐blue‐emitting materials with photoluminescence maxima around 420 and 450 nm in solution and in thin films, respectively. They possessed well‐defined chromophores resulting from steric interactions in the polymer chain. The photoluminescence quantum yields were up to 0.29. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2591–2600, 2002     

One‐step synthesis of polycarbonates bearing pendant carboxyl groups by lipase‐catalyzed ring‐opening polymerization

The ring‐opening polymerization of a monomer containing a free carboxylic acid group is reported for the first time. The monomer, 5‐methyl‐5‐carboxyl‐1,3‐dioxan‐2‐one (MCC), was copolymerized with trimethylene carbonate (TMC) in an enzymatic ring‐opening polymerization conducted in bulk at 80 °C. The low‐melting TMC comonomer also solubilized the high‐melting MCC monomer, allowing for solvent‐free polymerizations. Six commercially available lipases were screened, and Candida antarctica lipase‐B (Novozym‐435) and Pseudomonas cepacia lipase were selected to catalyze the copolymerization because of their higher monomer conversions. Higher molecular weight polymers (weight‐average molecular weight = 7800–9200) were prepared when Novozym‐435 was used, with less MCC incorporated into the copolymer than used in the monomer feed. However, Pseudomonas cepacia lipase showed good agreement between the molar feed ratios and the molar composition, but the molecular weights (weight‐average molecular weight = 3600–4800) were lower than those obtained when Novozym‐435 was used. ¹³C NMR spectral data were used for microstructural analysis, which suggested the formation of random, linear, and pendant carboxylic acid groups containing polycarbonates with hydroxyl groups at both chain ends. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1267–1274, 2002     

Long‐lived intermediates in reversible addition–fragmentation chain‐transfer (RAFT) polymerization generated by γ radiation

A novel experimental procedure is presented that allowed probing of reversible addition–fragmentation chain‐transfer (RAFT) free‐radical polymerizations for long‐lived species. The new experimental sequence consisted of gamma irradiation of a mixture of initial RAFT agent (cumyl dithiobenzoate) and monomer at ambient temperature, a subsequent predetermined waiting period without initiation source also at ambient temperature, and then heating of the reaction mixture to a significantly higher temperature. After each sequence step, the monomer conversion and molecular weight distribution were determined, indicating that controlled polymer formation occurs only during the heating period. The results indicated that stable intermediates (either radical or nonradical in nature) are present in such experiments because thermal self‐initiation of the monomer can be excluded as the reason for polymer formation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1058–1063, 2002