Promoting effect of thiophenols on the ring‐opening polymerization of 1,3‐benzoxazine

Thiophenol and p‐nitrothiophenol were evaluated as promoters for the ring opening polymerization of benzoxazine. The ring‐opening polymerization of p‐cresol type monofunctional N‐phenyl benzoxazine 1a with 10 mol % of thiophenols proceeded at 150 °C, leading to the high conversion of 1a more than 95% within 5 h, whereas the polymerization of 1a without thiophenols did not proceed under the same conditions. The promotion effect of the thiophenols on curing of bisphenol‐A type N‐phenyl benzoxazine 1b was also investigated. In the differential scanning calorimetric (DSC) analysis of the polymerization of 1b at 150 °C without using any promoters, an exothermic peak attributable to the ring‐opening reaction of benzoxazine was observed after 8 h. In contrast, in the DSC analysis of the polymerization of 1b with addition 20 mol % of p‐nitrothiophenol, an exothermic peak was observed within 2 h, to clarify the significant promoting effect of p‐nitrothiophenol. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2523–2527     

Statistical copolymers of norbornene and 5‐vinyl‐2‐norbornene by a ditungsten complex mediated ring‐opening metathesis Polymerization: Synthesis,thermal properties,and kinetics of thermal decomposition

Statistical copolymers of norbornene (NBE) with 5‐vinyl‐2‐norbornene (VNBE) were prepared by ring‐opening metathesis polymerization, employing the triply bonded ditungsten complex Na[W₂(μ‐Cl)₃Cl₄(THF)₂].(THF)₃. NMR measurements revealed that the side vinyl groups of the VNBE monomer remain intact during the copolymerization reaction. The reactivity ratios were estimated using the Finemann–Ross (FR), the inverted FR, and the Kelen–Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions, which were derived using the monomer reactivity ratios. The glass transition temperatures, T_g, of the copolymers were measured by differential scanning calorimetry measurements and were examined in the frame of several theoretical equations allowing the prediction of these T_g values. The best fit was obtained using methods that take into account the monomer sequence distribution of the copolymers. Finally, the kinetics of the thermal decomposition of the copolymers was studied by thermogravimetric analysis in the frame of the Ozawa–Flynn–Wall and Kissinger methods. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4835–4844     

Polymerization of n‐hexyl isocyanate with CpTiCl2(OR) (R = functional group or macromolecular chain): A route to ω‐functionalized and block copolymers and terpolymers of n‐hexyl isocyanate

Well‐defined ω‐cholesteryl poly(n‐hexyl isocyanate) (PHIC–Chol), as well as diblock copolymers of n‐hexyl isocyanate (HIC) with styrene, PS‐b‐PHIC [PS = polystyrene; PHIC = poly(n‐hexyl isocyanate)], and triblock terpolymers with styrene and isoprene, PS‐b‐PI‐b‐PHIC and PI‐b‐PS‐b‐PHIC (PI = polyisoprene), were synthesized with CpTiCl₂(OR) (R = cholesteryl group, PS, or PS‐b‐PI) complexes. The synthetic strategy involved the reaction of the precursor complex CpTiCl₃ with cholesterol or the suitable ω‐hydroxy homopolymer or block copolymer, followed by the polymerization of HIC. The ω‐hydroxy polymers were prepared by the anionic polymerization of the corresponding monomers and the reaction of the living chains with ethylene oxide. The reaction sequence was monitored by size exclusion chromatography, and the final products were characterized by size exclusion chromatography (light scattering and refractive‐index detectors), nuclear magnetic resonance spectroscopy, and, in the case of PHIC–Chol, differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6503–6514, 2005     

Physicochemical characterization of α‐chitin, β‐chitin,and γ‐chitin separated from natural resources

We isolated α‐chitin, β‐chitin, and γ‐chitin from natural resources by a chemical method to investigate the crystalline structure of chitin. Its characteristics were identified with Fourier transform infrared (FTIR) and solid‐state cross‐polarization/magic‐angle‐spinning (CP–MAS) ¹³C NMR spectrophotometers. The average molecular weights of α‐chitin, β‐chitin, and γ‐chitin, calculated with the relative viscosity, were about 701, 612, and 524 kDa, respectively. In the FTIR spectra, α‐chitin, β‐chitin, and γ‐chitin showed a doublet, a singlet, and a semidoublet at the amide I band, respectively. The solid‐state CP–MAS ¹³C NMR spectra revealed that α‐chitin was sharply resolved around 73 and 75 ppm and that β‐chitin had a singlet around 74 ppm. For γ‐chitin, two signals appeared around 73 and 75 ppm. From the X‐ray diffraction results, α‐chitin was observed to have four crystalline reflections at 9.6, 19.6, 21.1, and 23.7 by the crystalline structure. Also, β‐chitin was observed to have two crystalline reflections at 9.1 and 20.3 by the crystalline structure. γ‐Chitin, having an antiparallel and parallel structure, was similar in its X‐ray diffraction patterns to α‐chitin. The exothermic peaks of α‐chitin, β‐chitin, and γ‐chitin appeared at 330, 230, and 310, respectively. The thermal decomposition activation energies of α‐chitin, β‐chitin, and γ‐chitin, calculated by thermogravimetric analysis, were 60.56, 58.16, and 59.26 kJ mol^?1, respectively. With the Arrhenius law, ln β was plotted against the reciprocal of the maximum decomposition temperature as a straight line; there was a large slope for large activation energies and a small slope for small activation energies. α‐Chitin with high activation energies was very temperature‐sensitive; β‐Chitin with low activation energies was relatively temperature‐insensitive. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3423–3432, 2004     

Thiol‐functionalized 1,3‐benzoxazine: Preparation and its use as a precursor for highly polymerizable benzoxazine monomers bearing sulfide moiety

We describe a new strategy for preparation of benzoxazine monomers based on in situ preparation of a thiol‐functionalized benzoxazine and successive chemical modification of the thiol moiety. The thiol‐functionalized benzoxazine can be prepared from its precursor bearing two benzoxazine moieties linked by disulfide bond. Reductive cleavage of the disulfide bond of the precursor with using triphenylphosphine as a reducing agent allows successful preparation of the thiol‐functionalized benzoxazine. By performing this reduction process in the presence of epoxides and acrylates, the formation of the thiol moiety and its successive reaction with those electrophiles proceed efficiently to give the corresponding benzoxazines with sulfide moieties. The benzoxazine monomers thus prepared exhibit much higher polymerization ability than those without sulfide moiety. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1448–1457     

Thermal analysis of 1,4‐di[n′‐(quinolyl)]buta‐1,3‐diynes,structure, and topo‐oligomerization: Polymerization of 3‐ethynylquinoline with the triethyl aluminum/vanadium 2,4‐pentanedionate catalyst system

Conjugated 1,4‐bis(n′‐quinolyl)‐1,3‐butadiynes were obtained through the oxidative dimerization of the corresponding n′‐ethynylquinolines catalyzed by cuprous chloride. Differential scanning calorimetry analysis of the 1,4‐bis[n′‐(quinolyl)]buta‐1,3‐diyne molecules produced evidence of a syn–anti rotational equilibrium around the 1,3‐diyne axis and an irreversible transformation into a thermopolymer. The topo‐oligomerization of 1,4‐bis[3′‐(quinolyl)]buta‐1,3‐diyne, which took place by irradiation with sunlight, was investigated with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. Accurate X‐ray molecular structure and refinement analysis of 1,4‐bis[3′‐(quinolyl)]buta‐1,3‐diyne was conducted. The molecular crystalline packing consisted of parallel arrays of two groups of centrosymmetric molecules (antirotamer) in a herringbone assemblage in the solid state. The polymerization of 3‐ethynylquinoline was carried out with the AlEt₃/V(acac)₃ system to produce a mixture of 1,2,4‐ and 1,3,5‐tris(3′‐quinolyl)benzene cyclotrimers and a trans–cisoid polyene structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6031–6040, 2004     

Novel thermosets obtained by UV‐induced cationic copolymerization of DGEBA with an spirobislactone

The photocuring process of the diglycidyl ether of bisphenol A (DGEBA) with the bislactone 1,6‐dioxaspiro[4,4]nonane‐2,7‐dione (s(γ‐BL)) was studied. Triarylsulfonium hexafluoroantimonate was employed as photoinitiator. FTIR/ATR was used to study the evolution of epoxy, lactone, and intermediate spiroorthoester groups to identify the different reactions that take place during the photocuring process. Photo‐DSC and DSC were used to study the thermal evolution of the photocuring process and to assess the T_g of the fully cured material. Thermogravimetric analysis (TGA) was used to determine the thermal stability of the fully cured material. The thermomechanical properties of the materials were investigated using dynamic mechanical‐thermal analysis. Shrinkage undergone during photocuring and gelation was studied with TMA. A strong influence of the photocuring temperature on the photocuring process of the DGEBA‐ s(γ‐BL) system was observed. Differences in the reactivity of the different species were observed with respect to the thermally cured system using ytterbium triflate as cationic thermal initiator. As a consequence, photocured materials exhibited a superior thermal stability and lower flexibility. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5446–5458, 2007     

Synthesis and characterization of new segmented polyurethanes with side‐chain,liquid‐crystalline chain extenders

Liquid‐crystalline, segmented polyurethanes with methoxy–biphenyl mesogens pendant on the chain extender were synthesized by the conventional prepolymer technique and esterification reaction. Two, side‐chain, liquid‐crystalline (SCLC) polyurethanes with mesogens having spacers of six and eight methylene units were prepared. The structures of the mesogenic units and SCLC polyurethanes were confirmed by Fourier transform infrared spectroscopy and ¹H NMR. Polymer properties were also examined by solubility tests, water uptakes, and inherent viscosity measurements. Differential scanning calorimetry studies indicated that the transition temperature of the isotropic to the liquid‐crystalline phase decreased with increasing spacer length. Wide‐angle X‐ray diffraction (WAXD) studies revealed the existence of liquid‐crystalline phases for both SCLC polyurethanes. Polarized optical microscopic investigations further confirmed the thermotropic liquid‐crystalline behaviors and nematic mesophases of both samples. Thermogravimetric analysis displayed better thermal stabilities for both SCLC polymers and indicated that the presence of mesogenic side chains may increase the thermal stability of segmented polyurethanes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 290–302, 2004     

The characteristic of photoluminescence of tris‐(7‐substituted‐8‐hydroxyquinoline) aluminum complexes and polymeric complexes

The 7‐allyl‐ and 7‐(2‐methylvinyl)‐functionalized derivatives of 8‐hydroquinoline are synthesized by Claisen rearrangement and double bond rearrangement respectively. Then 7‐allyl‐8‐hydroquinoline (C) and 7‐(2‐methylvinyl)‐8‐hydroquinoline (D) are reacted with aluminum chloride to afford the corresponding tris‐(7‐allyl‐8‐hydroxyquinoline) aluminum complex (F) and tris‐(7‐(2‐methylvinyl)‐8‐hydroxyquinoline) aluminum complex (G). The photoluminescence of complex (F) or (G), compared with that of tris‐(8‐hydroxyquinoline) aluminum complex (E), all showed a red shift in emission wavelengths in different solvents, such as chloroform, hexane and ethanol. For two substituents containing an external double bond, the 2‐methylvinyl group gives a larger red shift in the emission wavelength than the allyl group. The X‐ray crystal structure indicates that 7‐(2‐methylvinyl)‐8‐hydroxyquinoline (D) is a trans‐isomer. The styrene and 7‐allyl‐8‐hydroxyquinoline copolymer, and the styrene and 7‐(2‐methylvinyl)‐8‐hydroxyquinoline copolymer are also reported. Further reactions of the copolymer are then performed by adding aluminum(III) chloride and ligands 8‐hydroxyquinoline. The spectroscopic characteristics of these aluminum(III) polymeric complexes are discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and characterization of chiral poly(alkyl isocyanates) by coordination polymerization using a chiral half‐titanocene complex

A new chiral half‐titanocene complex, [CpTiCl₂(O‐(S)?2‐Bu)], is synthesized and characterized by ¹H and ¹³C NMR spectroscopy. This complex is employed for the coordination polymerization of n‐butyl and n‐hexyl‐ isocyanate leading to chiral polymers, as revealed by their CD spectra. Only the left‐handed helix is produced, due to the chiral (S)?2‐butoxy group, which is bound to the polymer chain end. The polymerization of 3‐(triethoxysilyl)propyl isocyanate produces less soluble polymers. On the other hand, phenyl isocyanate reacts slowly with the complex leading quantitatively and selectively to triphenyl isocyanurate. 2‐Ethylhexyl isocyanate is slowly and selectively cyclotrimerized in the presence of the half‐titanocene complex. However, a statistical copolymer of 2‐ethylhexyl isocyanate and hexyl isocyanate is produced. The reaction of benzyl isocyanate with the complex leads to a mixture of low molecular weight polymer and cyclotrimer. The polymers are characterized using SEC, NMR, and CD spectroscopy and their thermal properties are investigated by TGA/DSC analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2141–2151     

Nanohybrids based on polymeric ionic liquid prepared from functionalized MWCNTs by modification of anionically synthesized poly(4‐vinylpyridine)

We report the synthesis of a composite material comprised of poly(4‐vinylpyridine) (P4VP) grafted on multiwall carbon nanotubes (MWCNTs) and the preparation of a nanohybrid via quaternization of the nitrogen atom per monomeric unit of the polymer chains. 4‐Vinylpyridine was polymerized anionically using high vacuum techniques and was reacted with MWCNTs under vacuum to be grafted on the polymer segments. The composite material was soluble in common solvents and the dispersion of the carbon nanotubes was improved after quaternization due to the formation of polymeric ionic liquid (PIL) of the MWCNTs‐g‐[P4VP‐r‐poly(4ViEtPy⁺Br^‐)] type. The successful synthesis was confirmed with Fourier‐transform infrared and Raman spectroscopies, whereas differential scanning calorimetry was adopted to verify the stability of the polymer's glass transition temperature before and after grafting on the MWCNTs. Moreover, thermogravimetric analysis was used for examining the thermal stability and the PIL formation of the composite. Energy dispersive spectroscopy measurements confirm the precipitation of silver bromide when the MWCNTs‐g‐[P4VP‐r‐poly(4ViEtPy⁺Br^‐)] is reacted with silver nitrite indicating the successful quaternization and formation of the appropriate PIL. High temperature size exclusion chromatography was used for the determination of the molecular characteristics (average molecular weight by number $\overline M _n$ , polydispersity I) of the homopolymer obtained from the filtration of the composite material. Finally, field‐emission scanning electron microscopy was used to verify the successful grafting of the polymer to the MWCNTs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of polyisoprene–poly(methyl methacrylate) block copolymers via a two‐electron‐transfer mechanism

Supramolecular complexes of alkali metals were used as catalysts in the polymerization of isoprene via a two‐electron‐transfer mechanism. The obtained polyisoprene, having a living end group, was subsequently used to initiate methyl methacrylate polymerization in tetrahydrofuran. Polyisoprene–poly(methyl methacrylate) block copolymers were obtained, and their structure was established with ¹H NMR, gel permeation chromatography, differential scanning calorimetry, and experiments of selective extraction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1086–1092, 2006     

Thermal and X‐ray powder diffraction studies of aliphatic polyester dendrimers

The syntheses and thermal and X‐ray powder diffraction analyses of three sets of aliphatic polyester dendrimers based on 2,2‐bis(hydroxymethyl)propionic acid as a repeating unit and 2,2‐dimethyl‐1,3‐propanediol, 1,5‐pentanediol, and 1,1,1‐tris(hydroxymethyl)ethane as core molecules are reported. These dendritic polyesters were prepared in high yields with the divergent method. The thermal properties of these biodendrimers were evaluated with thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the compounds occurred around 250 °C for the hydroxyl‐ended dendrimers and around 150 °C for the acetonide‐protected dendrimers. In addition, the crystallinity of the lower generation dendrimers was evaluated with X‐ray powder diffraction. The highest crystallinity and the highest melting points were observed for the first‐generation dendritic compounds. The higher generation dendrimers showed weaker melting transitions during the first heating scan. Only the glass‐transition temperatures were observed in subsequent heating scans. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5574–5586, 2004     

Easy Access to Chain‐Length‐Dependent Termination Rate Coefficients Using RAFT Polymerization

Chain‐length‐dependent termination rate coefficients of the bulk free‐radical polymerization of styrene at 80 °C are determined by combining online polymerization rate measurements (DSC) with living RAFT polymerizations. Full k_t versus chain‐length plots were obtained indicating a high k_t value for short chains (2 × 10⁹ L · mol⁻¹ · s⁻¹) and a weak chain‐length dependence between 10 and 100 monomer units, quantified by an exponent of −0.14 in the corresponding power law 〈k_t^i,i〉 = k_t⁰ · P^−b.

Double logarithmic plots of 〈k_t^i,i〉 versus P, evaluated from experimental time‐resolved R_p data according to the procedure described in the text, for different CPDA and AIBN concentrations. The best linear fit for (10 < P < 100) is indicated as full line.     

Novel Approach to Oligomers and Polymers Containing Neutral and Cationic Iron Moieties Within and Pendent to Their Backbones

Polymers containing neutral and cationic iron moieties within and pendent to their backbones were prepared. The redox properties of the neutral and cationic iron centers were examined using cyclic voltammetry. Photolysis of the organometallic polymers led to decoordination of the cationic cyclopentadienyliron moieties from the polymer backbones. Glass transition temperatures of the resulting ferrocene‐based polymers were lower than those of the mixed neutral/cationic polymers.