Poly(phenylene vinylene)‐based copolymers containing 3,7‐phenothiazylene and 2,6‐pyridylene chromophores: Fluorescence sensors for acids,metal ions,and oxidation

A novel copolymer, poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐2,6‐pyridylene‐1,2‐ethenylene) ( P3 ), containing N‐hexyl‐3,7‐phenothiazylene and 2,6‐pyridylene chromophores was synthesized to investigate the effect of protonation, metal complexation, and chemical oxidation on its absorption and photoluminescence (PL). Poly(N‐hexyl‐3,8‐iminodibenzyl‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) and poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) ( P2 ), consisting of 1,3‐divinylbenzene alternated with N‐hexyl‐3,8‐iminodibenzyl and N‐hexyl‐3,7‐phenothiazylene, respectively, were also prepared for comparison. Electrochemical investigations revealed that P3 exhibited lower band gaps (2.34 eV) due to alternating donor and acceptor conjugated units (push–pull structure). The absorption and PL spectral variations of P3 were easily manipulated by protonation, metal chelation, and chemical oxidation. P3 displayed significant bathochromic shifts when protonated with trifluoroacetic acid in chloroform. The complexation of P3 with Fe³⁺ led to a significant absorption change and fluorescence quenching, and this implied the coordination of ferric ions with the 2,6‐pyridylene groups in the backbone. Moreover, both phenothiazylene‐containing P2 and P3 showed conspicuous PL quenching with a slight redshift when oxidized with NOBF₄. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1272–1284, 2004     

Synthesis and luminescence of yellow/orange‐emitting poly[tris(2,5‐dihexyloxy‐1,4‐phenylenevinylene)‐ alt‐(1,3‐phenylenevinylene)]s

Soluble yellow/orange‐emitting poly[tris(2,5‐dihexyloxy‐1,4‐phenylenevinylene)‐alt‐(1,3‐phenylenevinylene)] derivatives ( 6 ) were synthesized and characterized. These polymers contained oligo(p‐phenylene vinylene) chromophores of equal conjugation length, which were jointed via a common m‐phenylene unit. An optical comparison of 6 and its model compound ( 8 ) at room temperature and low temperatures revealed the similarity in their absorption and fluorescence band structures. The vibronic band structure of 6 was assigned with the aid of the spectroscopic data for 8 at the low temperatures. 6 was electroluminescent and had an emission maximum wavelength at approximately 565 nm. With the device indium tin oxide/PEDOT/ 6 /Ca configuration, the polymer exhibited an external quantum efficiency as high as 0.25%. Simple substitution on m‐phenylene of 6 raised the electroluminescence output by a factor of about 10. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5853–5862, 2004     

Synthesis of electroluminescent copoly(aryl ether)s containing alternate 1,4‐distyrylbenzene derivatives and aromatic 1,3,4‐oxadiazole or 3,3″‐terphenyldicarbonitrile segments

New copoly(aryl ether)s ( P1 – P3 ) containing alternate 2,5‐dihexyloxy‐1,4‐di(m‐ethoxystyryl)benzene ( P1 , P2 ) or 2,5‐dihexyloxy‐1,4‐distyrylbenzene ( P3 ) chromophores and aromatic 1,3,4‐oxadiazole ( P1 ) or 3,3″‐terphenyldicarbonitrile ( P2 , P3 ) segments were prepared by Horner reaction ( P1 and P2 ) or nucleophilic displacement reaction ( P3 ). They are basically amorphous materials with 5% weight‐loss temperature above 410 °C. Their absorption, photoluminescence spectra, and quantum yields are dependent on the composition of the isolated fluorophores. The emissions are exclusively dominated by 1,4‐distyrylbenzene segments via excitation energy transfer from electron‐transporting 1,3,4‐oxadiazole ( P1 ) or 3,3″‐terphenyldicarbonitrile ( P2 , P3 ) chromophores. The HOMO and LUMO energy levels have been estimated from their cyclic voltammograms, and the observations confirm that oxidation and reduction start from the emitting 1,4‐distyrylbenzene and electron‐transporting segments, respectively, indicating that both carriers affinity can be enhanced simultaneously. Among the two‐layer PLED devices (ITO/PEDOT/ P1 – P3 /Al), P1 exhibits the best performance with a turn‐on field of 4 × 10⁵ V/cm and a maximum luminance of 225 cd/m². However, P2 emits green–yellow light (555 nm), owing to the excimer emission. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5009–5022, 2005     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Luminescent copolyethers containing isolated 1,4‐distyrylbenzene derivatives backbone and 7‐oxy‐4‐methylcoumarin side group: Synthesis and characterization

Four new copolyethers ( P1 – P4 ) consisting of two isolated emitting chromophores [2,5‐dihexyloxy‐1,4‐distyrylbenzene (HODSB) and 2,5‐dihexyloxy‐1,4‐di(4‐methylenestyryl)benzene (HOMDSB) for P1 and P2 , 2,5‐dihexyl‐1,4‐distyrylbenzene (HDSB) and HOMDSB for P3 and P4 ] in the backbone, in which P2 and P4 further contain electron‐transporting chromophores [7‐oxy‐4‐methylcoumarin (OMC)] in the side chain, were successfully prepared by the Heck coupling reaction. The photoluminescence spectra and quantum yields of the copolymers depended mainly on compositions of the isolated fluorophores. Their highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels were estimated from their cyclic voltammograms. Electrochemical investigations proved that the oxidation started at hole‐transporting DSB segments, whereas reduction began at electron‐transporting OMC groups in P2 and P4 . The electron affinity of P2 and P4 was enhanced by introducing electron‐transporting OMC chromophores. Double‐layer light‐emitting diodes (ITO/PEDOT:PSS / polymer/Al) of P1 and P2 revealed green electroluminescence, and those of P3 and P4 emitted blue light. Moreover, incorporation of OMC side groups effectively reduced turn‐on electric field and enhanced luminance efficiency of the EL devices due to increased electron affinity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 211–221, 2007     

Syntheses and characterization of carbazole based new low‐band gap copolymers containing highly soluble benzimidazole derivatives for solar cell application

Newly designed 2H‐benzimidazole derivatives which have solubility groups at 2‐position have been synthesized and incorporated into two highly soluble carbazole based alternating copolymers, poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spirocyclohexane)] (PCDTCHBI) and poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spiro‐4′′‐((2′′′‐ethylhexyl)oxy)‐cyclohexane)] (PCDTEHOCHBI) for photovoltaic application. These alternating copolymers show low‐band gap properties caused by internal charge transfer from an electron‐rich unit to an electron‐deficient moiety. HOMO and LUMO levels are –5.53 and –3.86 eV for PCDTCHBI, and –5.49 and –3.84 eV for PCDTEHOCHBI, respectively. Optical band gaps of PCDTCHBI and PCDTEHOCHBI are 1.67 and 1.65 eV, respectively. The new carbazole based the 2H‐benzimidazole polymers show 0.11–0.13 eV lower values of band gaps as compared to that of carbazole based benzothiadiazole polymer, poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT), while keeping nearly the same deep HOMO levels. The power conversion efficiencies of PCDTCHBI and PCDTEHOCHBI blended with [6,6]phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) are 1.03 and 1.15%, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Electronic Properties of Two Series of Blue-Emitting Conjugated Oligomers and Polymers Based on Cyanostilbene： A Quantum Chemistry Study

One of the drawbacks of the electroluminescence （EL） polymers is that they are usually much better at accepting and transporting holes than electrons due to their inherent richness of π-electrons. One approach improving electron injection and transport in conjugated polymers is to incorporate moieties with high electron affinities. In this theoretical work, to gain an insight into the chemical structure-property relationships was aimed by controllable modification of the main chain structures. Two cyanovinylene derivatives with 2,7-fluorenylene and p-phenylene moieties in the main chains, namely, poly { （2,5-dimethoxy-p-phenylene- 1,4-ylene）-alt-[ 1,2-bis（p-phenylene）- 1- cyanovinylene]} （PPhCN） and poly{[9,9-dimethyl-2,7-fluorenylene]-alt-[1,2-bis（p-phenylene）-1-cyanovinylene]} （PFCN）, were studied employing density functional theory （DFT） and time dependent density functional theory （TD-DFT） with B3LYP functional. The electronic properties of the neutral molecules, extrapolated ionization potentials （IP） and electron affinities （EA）, and energy gaps were investigated in comparison with pristine poly（2,7- fluorenylene）. From comparison with poly（2,7-fluorenylene） （PF）, the 1,2-bis（p-phenylene）-1-cyanovi-nylene unit was found to be a good electron-withdrawing moiety for electronic materials and the incorporation of 1,2-bis（p- phenylene）-1-cyanovinylene resulted in a narrow band gap and a red shift of both the absorption and photoluminescence emission peaks. Most importantly, the LUMO energies of PFCN are around 1 eV lower than those of PF, which results in the decrement of EA about 0.9 eV, indicating that the 1,2-bis（p-phenylene）-1-cyanovinylene unit has significantly improved the electron-accepting properties of the copolymer PFCN. Substitution of 2,5-dimethoxy-p-phenylene for 9,9-dimethyl-2,7-fluorenylene induced larger band gaps and thus a blue-shift in absorption and emission peaks, which can be attributed to the better conjugated backbone in PFCN.     

A New Photoluminescent Conjugated Poly(1‐hexyl‐3,4‐dimethyl‐2,5‐pyrrolylene): Synthesis,Properties and Characterization

Oxidative coupling reaction of 1‐hexyl–3,4‐dimethylpyrrole affords a conjugated conducting poly(1‐hexyl‐3,4‐dimethyl‐2,5‐pyrrolylene) (PHDP), which is completely soluble in common organic solvents. The luminescence of PHDP is comparable to that of poly(N‐vinylcarbazole) (PVK), which has been widely used in electroluminescence devices. The quantum efficiency of PHDP is 2.5 times higher than that of PVK. A rationalization is presented relating the conductivity of PHDP to its polymer structure.     

Synthesis and optoelectronic properties of luminescent poly(p‐phenylenevinylene) derivatives containing electron‐transporting 1,3,4‐oxadiazole groups

Three random copolymers ( P1–P3 ) comprising phenylenevinylene and electron‐transporting aromatic 1,3,4‐oxadiazole segments (11, 18, 28 mol %, respectively) were prepared by Gilch polymerization to investigate the influence of oxadiazole content on their photophysical, electrochemical, and electroluminescent properties. For comparative study, homopolymer poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐p‐phenylenevinylene] ( P0 ) was also prepared by the same process. The polymers ( P0–P3 ) are soluble in common organic solvents and thermally stable up to 410 °C under a nitrogen atmosphere. Their optical properties were investigated by absorption and photoluminescence spectroscopy. The optical results reveal that the aromatic 1,3,4‐oxadiazole chromophores in P1–P3 suppress the intermolecular interactions. The HOMO and LUMO levels of these polymers were estimated from their cyclic voltammograms. The HOMO levels of P0–P3 are very similar (?5.02 to ?5.03 eV), whereas their LUMO levels decrease readily with increasing oxadiazole content (?2.7, ?3.08, ?3.11, and ?3.19 eV, respectively). Therefore, the electron affinity of the poly(p‐phenylenevinylene) chain can be gradually enhanced by incorporating 1,3,4‐oxadiazole segments. Among the polymers, P1 (11 mol % 1,3,4‐oxadiazole) shows the best EL performance (maximal luminance: 3490 cd/m², maximal current efficiency: 0.1 cd/A). Further increase in oxadiazole content results in micro‐phase separation that leads to performance deterioration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4377–4388, 2007     

Synthesis of conjugated polymers containing anthracene moiety and their electro‐optical properties

Both fully conjugated polymer poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene‐alt‐9,10‐anthrylene vinylene] [poly(MEHPV‐AV)] and conjugated/nonconjugated block copolymers poly(alkanedioxy‐2‐methoxy‐1,4‐phenylene‐1,2‐ethenylene‐9,10‐anthrylene‐1,2‐ehthenylene‐3‐methoxy‐1,4‐phenylene)[poly(BFMPx‐AV), (x = 4, 8, and 12)] were synthesized by Horner–Emmons reaction utilizing potassium tert‐butoxide. Of these synthesized polymers poly(BFMP4‐AV) and poly(BFMP8‐AV), which has four and six methylene groups as solubility spacer in the main chain exhibited liquid crystalline to isotropic transition in addition to the two first order transitions. Light‐emitting diode (LED)s made from the organic solvent soluble poly(BFMP12‐AV) as emitting layer showed blue shift in the emission spectrum compared to the one made from fully conjugated poly(MEHPV‐AV). Although poly(BFMP12‐AV) had higher barrier to the electron injection from cathode than poly(MEHPV‐AV), the luminance efficiency of LED made from poly(BFMP12‐AV) was about 25 times higher than the one made from poly(MEHPV‐AV), which had fully conjugated structure. LEDs fabricated by both poly(BFMP12‐AV) and poly(MEHPV‐AV) exhibited Stoke's shift in the range of 155 to 168 nm from the absorption maximum due to the excimer formation between the ground and excited state anthracene groups. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3173–3180, 2000     

Theoretical investigations on the carbazole‐based conjugated polymers containing electron‐donating divinylaryl

The polycarbazoles have been proved to efficiently suppress the keto defect emission. Three carbazole‐based conjugated polymers, poly[9‐methyl‐3‐(4‐vinylstyryl)‐9H‐carbazole] (PBC), poly[9‐methyl‐3‐(2‐(5‐vinylthiophen‐2‐yl)vinyl)‐9H‐carbazole] (PBT) and poly[9‐methyl‐3‐(2‐(5‐vinylfuran‐2‐yl)vinyl)‐9H‐carbazole] (PBF), were investigated by quantum‐chemical techniques, and gain a detailed understanding of the influence of carbazole units and the introduction of electron‐donating on the electronic and optical properties. The electronic properties of the neutral molecules, HOMO‐LUMO gaps (ΔE), in addition to ionization potential (I_p) and electron affinity (E_a), are studied using B3LYP density functional theory. The lowest excitation energies (E_g) and the absorption wavelength are studied using the time dependent density functional theory (TDDFT). The calculated results show that all three series of polymers have good planarity. And the highest‐occupied molecular orbital (HOMO) energies lift about 0.36–0.61 eV and thus the I_P decrease about 0.01–0.19 eV compared to polycarbazole, suggesting the significant improved hole‐accepting and transporting abilities. By introducing the electron‐donating 1,4‐divinylphenylene or 2,5‐divinylthiophene or 2,5‐divinylfuran units in the backbone, and the lowest‐unoccupied molecular orbital (LUMO) energies decrease 0.20–0.39 eV. In addition, PBC, PBT and PBF have longer maximal absorption wavelengths than polycarbazole. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 706–714, 2009     

Synthesis and fluorescent properties of model compounds for conjugated polymer containing maleimide units at the main chain

2,3‐Diaryl substituted maleimides as model compounds of conjugated maleimide polymers [poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar)] were synthesized from 2,3‐dibromo‐N‐substituted maleimide (DBrRMI) [R= cyclohexyl (DBrCHMI) and n‐hexyl (DBrHMI)] and aryl boronic acid using palladium catalysts. To clarify structures of conjugated polymer containing maleimide units at the main chain, ¹³C NMR spectra of 2‐aryl or 2,3‐diaryl substituted maleimides were compared with those of N‐substituted maleimide polymers. Copolymers obtained with DBrRMI via Suzuki‐Miyaura cross‐coupling polymerizations or Yamamoto coupling polymerizations were dehalogenated structures at the terminal end. This dehalogenation may contribute to the low polymerizability of DBrRMIs. On the other hand, the π‐conjugated compounds showed high solubility in common organic solvents. The N‐substituents of maleimide cannot significantly affect the photoluminescence spectra of 2,3‐diaryl substituted maleimides derivatives. The fluorescence spectra of poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar) varied with N‐substituents of the maleimide ring. When exposed to ultraviolet light of wavelength 352 nm, a series of 1,4‐phenylene‐ and/or 2,5‐thienylene‐based copolymers containing N‐substituted maleimide derivatives fluoresced in a yellow to blue color. It was found that photoluminescence emissions and electronic state of π‐conjugated maleimide derivatives were controlled by aryl‐ and N‐substituents, and maleimide sequences of copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New blue electroluminescent n‐type polyfluorene copolymers with a 1,3,4‐oxadiazole unit in the main chain

Novel polyfluorene copolymers alternately having an 1,3,4‐oxadiazole unit in the main chain were prepared by both one‐step and two‐step methods for polyoxadiazole synthesis. They displayed highly efficient blue photoluminescence, the properties of which were affected by the extent of conjugation and the changes in the electron density by a side chain. An electrochemical analysis of the polymers using cyclic voltammetry suggested that they could be used as electron‐transport/hole‐blocking materials as well as blue emission materials for polymer light‐emitting diodes. A simple double‐layer device consisting of poly(N‐vinylcarbazole) as a hole‐transport layer and poly[(9,9′‐didodecylfluorene‐2,7‐diyl)‐alt‐((1,4‐bis(1,3,4‐oxadiazole)‐2,5‐di(2‐ethylhexyloxy)phenylene)‐5,5′‐diyl)] as an emission layer exhibited narrow blue electroluminescence with a maximum at 430 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1058–1068, 2004     

Synthesis and characterization of three organic dyes with various donors and rhodanine ring acceptor for use in dye-sensitized solar cells

A series of new organic dyes comprising carbazole, iminodibenzyl, and phenothiazine moieties as the electron donors and rhodanine ring as the electron acceptor/anchoring groups were designed and developed for use in dye-sensitized solar cells. HOMO and LUMO energy level tuning was achieved by varying the carbazole, iminodibenzyls and phenothiazine donors. This was evidenced by spectral and electrochemical experiments and density functional theory calculations. Electrochemical studies indicated that the phenothiazine unit was much more effective in lowering the ionization potential than were the iminodibenzyl and carbazole units. The phenothiazine dye shows a solar-energy-to-electricity conversion efficiency (η) of 4.87%; the carbazole and iminodibenzyl dyes show η of 2.54% and 3.52%, respectively. These findings reveal that using carbazole, iminodibenzyl and phenothiazine donors as light-harvesting sensitizers are promising candidates for dye-sensitized solar cells.     

New Low Bandgap Dithienylbenzothiadiazole Vinylene Based Copolymers: Synthesis and Photovoltaic Properties

Two new low‐bandgap block copolymers derived from dithienylbenzothiadiazole (DTBT) and different electron‐rich functional groups (dioctoxyl benzene and N‐octyl‐diphenylamine), poly(1,4‐dioctoxyl‐2,5‐divinylbenzene‐co‐4,7‐dithiophene‐2′‐yl‐2,1,3‐benzothiadiazole) (PPV‐DTBT), poly(3,8‐divinyl‐N‐octyl‐diphenylamine‐co‐4,7‐dithiophene‐2′‐yl‐2,1,3‐benzothiadiazole) (PDPAV‐DTBT), were synthesized by Heck cross‐coupling polymerization. PPV‐DTBT and PDPAV‐DTBT are easily soluble in common organic solvents such as o‐dichlorobenzene and chloroform. DSC and TGA results indicate that these copolymers possess good thermal stabilities. PPV‐DTBT and PDPAV‐DTBT films exhibit broad absorption bands at 300–765 nm (with an optical bandgap of 1.62 eV) and 300–733 nm (with an optical bandgap of 1.69 eV), respectively. The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of PPV‐DTBT were estimated by cyclic voltammetry to be −5.43 and −3.74 eV, respectively, and the HOMO and LUMO of PDPAV‐DTBT were −5.37 and −3.7 eV, respectively. Preliminary photovoltaic cells based on the composite structure of ITO/PEDOT: PSS/PPV‐DTBT:PCBM (1: 2, w/w)/Al showed an open‐circuit voltage of 0.75 V, a power conversion efficiency of 0.6%, and a short circuit current of 1.7 mA · cm⁻².

     

Conjugated polymers for pure UV light emission: Poly(meta‐phenylenes)

We report the synthesis of a 3‐ethylhexyloxy substituted poly(meta‐phenylene), EHO‐PMP that shows absorption and solid state photoluminescence exclusively in the UV region of the electromagnetic spectrum with an emission maximum of 345 nm. Computational analysis of model oligomers by DFT methods indicates that EHO‐PMP is a wide bandgap polymer with the HOMO being localized on a dimeric (biphenyl) unit and with the LUMO being more delocalized. The energy of the LUMO, however, suggests that inefficient electron injection would occur from currently available cathode materials in standard light‐emitting device architectures, and this was observed experimentally. The computational results, coupled with experimental observation, lead us to believe that efficient electroluminescence from organic polymer UV emitters requires advances in electron transport layers and cathode materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Time‐dependent density functional theory study of electronic spectrum property for carbazolyl–pyridinyl alternating copolymers

Three A‐B‐type fluorescent copolymers comprised of alternating carbazolyl and pyridinyl units, poly[(2,7‐(N‐(2‐ethylhexyl)carbazolyl)‐alt‐(3,5‐pyridinyl))](PEHCP‐35), poly[(2,7‐(N‐(2‐ethylhexyl)carbazolyl)‐alt‐(2,6‐pyridinyl))] (PEHCP‐26) and poly[(2,7‐(N‐(2‐ethyl‐hexyl)carbazolyl)‐alt‐(2,5‐pyridinyl))] (PEHCP‐25), are studied by means of the density functional theory (DFT/B3LYP/6‐31G). Based on the optimized geometries, the optical properties are calculated by employing time‐dependent density functional theory (TD‐DFT). The bandgaps and optical properties are saturated quickly in PEHCP‐35 and PEHCP‐26. It is known from experiment that PEHCP‐25 is actually an oligomer with a polymerization degree of 4. So the tetramers of PEHCP‐35, PEHCP‐26, and PEHCP‐25 are adopted to study the electronic and optical properties, and the calculated results are in close agreement with experiment. The calculated bandgaps of copolymers obtained from two ways, i.e., HOMO–LUMO gaps and the lowest excitation energies, decrease in the following order PEHCP‐35 > PEHCP‐26 > PEHCP‐25, the same trend as the data obtained from the edge of the electric band but different from the electrochemically obtained data from experiment (PEHCP‐25 > PEHCP‐26 > PEHCP‐35). The outcomes showed that, when excited, a charge transfer from carbazolyl unit to pyridinyl unit occurs, and the lumophor is mainly carbazolyl units. The UV absorption and emission wavelengths both exhibit bathochromic shifts: PEHCP‐35 < PEHCP‐26 < PEHCP‐25. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Poly[methyl(phenyl)silanediyl] modified with dansyl fluorophore: Synthesis and photophysics

The syntheses and photophysical properties of novel luminescent polysilanes modified with dansyl fluorophores on various spacer (PMPSi‐n‐DNS) are reported. The modified polysilanes were prepared by condensation reaction of dansyl amines, such as 5‐(dimethylamino)naphthalene‐1‐sulfonohydrazide or N‐(ω‐aminoalkyl)‐5‐(dimethylamino)naphthalene‐1‐sulfonamides with formylated poly[methyl(phenyl)silanediyl], yielding Schiff bases. The aldehyde groups were incorporated into the parent polymer by a one‐step reaction with dichloromethyl methyl ether in the presence of Lewis acid. Influence of the alkyl chain length (n) on the photophysical properties was investigated using absorption, steady‐state, and time‐resolved photoluminescence (PL) spectroscopy. The excitation energy transfer from the polysilane backbone to dansyl fluorophore was proved. PL decay dynamics revealed the existence of more than one excited species. In solution, the decay curves of PMPSi‐DNS (no spacer) were double exponential, whereas for PMPSi‐n‐DNS (with spacer), and, in thin films, the decays were three‐exponential. Polymer light‐emitting devices (LEDs) were prepared from the blends of modified polysilane with electroluminescent polymer poly[2,5‐dimethoxy‐1,4‐phenylene‐1,2‐ethenylene‐2‐methoxy‐5‐(2‐ethylhexyloxy)‐(1,4‐phenylene‐1,2‐ethenylene)] (M3EH‐PPV). Compared with LED made of neat electroluminescent polymer, a significant performance improvement of blend LEDs was demonstrated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of novel luminescent polymers with alternate phenothiazine and divinylbenzene units

Novel luminescent polymers ( P1 and P2 ) carrying alternate phenothiazine and divinylbenzene units were synthesized via the Wittig reaction. Absorption, fluorescence, and cyclic voltammetric methods were applied to investigate their optical and electrochemical properties. The photoluminescence (PL) maxima of P1 and P2 were 559 and 568 nm, respectively. Compared with reported hole‐transport groups such as carbazole, alkyldiphenylamine, triphenylamine, and iminodibenzyl chromophores, phenothiazine moieties in P1 and P2 bathochromically shift the PL maxima and narrow the band gaps. Their relative PL efficiencies were about 0.5 and 0.3 in solution and in the film state, respectively. Moreover, highest occupied molecular orbitals of P1 (4.78 eV) and P2 (4.74 eV) were even higher than the work function of ITO electrode (4.8 eV). The threshold electric fields of the Al/ P1 (or P2 )/ITO device were about 1.52–1.63 · 10⁶ V/cm, which were smaller than 1.73 · 10⁶ V/cm of P3 , consisting of alternate iminodibenzyl and divinylbenzene units. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4452–4462, 2002     

Synthesis and properties of conjugated copolycondensates consisting of carbazole‐2,7‐diyl and fluorene‐2,7‐diyl

Carbazole and fluorene‐based random and alternating copolycondensates were synthesized to develop high‐performance blue light‐emitting polymers by improving electron injection ability of poly(N‐aryl‐2,7‐carbazole)s that showed intense blue electroluminescence (EL) with good hole‐injection and ‐transport ability. These copolycondensates absorbed light energy at about λ_max = 390 nm in CHCl₃ and 400 nm in film state, and fluoresced at about λ_max = 417 nm in CHCl₃ and 430 nm in the thin film state. Energy gaps between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of them were about 2.9 eV, and the energy levels of LUMO situated lower than that of corresponding polycarbazole. Polymer light‐emitting diode devices having configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)/polymer/CsF/Al using the copolycondensates, poly(N‐arylcarbazole‐2,7‐diyl), and poly(9,9‐dialkylfluorene‐2,7‐diyl), emitted bluish EL at operating voltages lower than 7 V. The device embedded the random copolycondensate showed notably higher performance with maximum luminance of 31,200 cd m^?2 at 11.0 V, and the current efficiencies observed under operating voltages lower than 7 V were higher than those of the other devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012