聚碳酸酯类非晶聚合物力学性能及其本构关系

聚碳酸酯是一类玻璃态非晶聚合物材料，由于其出色的耐热和抗冲击能力，被广泛地应用于国防军事和工业领域。针对主要应用于聚碳酸酯材料类非晶聚合物，首先回顾了其力学性能实验研究现状，从唯象的角度分析实验结果，揭示这类材料力学性能。其次介绍了这类材料的各种本构模型的发展历程、物理机制、力学特性、适用范围等。最后，概述了各类本构模型在聚碳酸酯类聚合物材料中的应用，从工程应用的角度进一步讨论了本构模型对材料力学行为的表征，同时给出了聚碳酸酯类材料在实验和理论研究中仍然存在的关键科学问题及进一步的研究展望。     

金属材料力学性能的辐照硬化效应

开展金属材料力学性能的辐照硬化研究对抗辐照材料的设计及工程应用具有重要意义. 材料辐照损伤效应主要包括材料原子移位产生的辐照缺陷以及由核反应产生的氢、氦等气体杂质对材料性能的影响. 金属材料的辐照效应主要包括辐照硬化、辐照脆化和辐照蠕变等. 该文主要综述在低温(T < 0.3 T_m, T_m 是材料的熔点温度) 和低辐照剂量下, 由原子移位损伤产生的辐照缺陷所导致的辐照硬化行为, 即受辐照缺陷的影响, 材料的强度会升高. 材料的晶粒尺寸、晶界以及温度等因素对多晶材料的辐照硬化具有重要影响. 金属材料力学性能的辐照硬化研究是个多尺度问题, 其宏观力学性能既取决于微观尺度上辐照缺陷导致晶粒内部结构的变化, 也取决于细观尺度上晶粒间的相互作用. 该文从实验结果、数值模拟和理论模型三方面综述金属材料力学性能的辐照硬化研究进展. 在此基础上, 展望了该领域中存在的主要科学问题.      

The mesoscopic structures of dense granular materials

密集颗粒物质由大量颗粒组成的多体相互作用体系,在一定条件下,颗粒互相连接,形成相对稳定的介观尺度结构,其几何和动力学性质较大程度上决定了颗粒体系的宏观物理和力学性质,因此开展颗粒的介观结构研究具有重要的理论价值,是科学的前沿之一.自然界的堆石坝、堰塞体和碎屑流,以及工程中的高温气冷堆堆芯颗粒流和先进核裂变能系统（ADS嬗变）的颗粒散裂靶等都是典型的颗粒体系,研究颗粒体系宏观力学性质是灾害预测和调控技术的关键.本文首先介绍颗粒接触力理论和简化模型的研究进展,接着介绍介观尺度结构分析方法与测量技术,颗粒体系Jamming转变、软点和颗粒微位移测量技术等,最后列举了几个关键的科学问题.颗粒介质中很多基本力学问题的解决需要借鉴物理和数学等学科的最新成果,建立新的概念和范式,从新的角度、思路、理念去认识颗粒介质的基本问题.同时,颗粒介质的基础研究还要紧密结合工程应用领域的大量相关的核心技术,与工程领域专家共同合作,使得颗粒介质的研究有的放矢,更具生命力.     

Evolution of plastic anisotropy in amorphous polymers during finite straining

The large strain deformation response of amorphous polymers results primarily from orientation of the molecular chains within the polymeric material during plastic straining. Molecular network orientation is a highly anisotropic process, thus the observed mechanical response is strongly a function of the anisotropic state of these materials. Through mechanical testing and material characterization, the nature of the evolution of molecular orientation under different conditions of state of strain is developed. The role of developing anisotropy on the mechanical response of these materials is discussed in the context of assessing the capabilities of several models to predict the state of deformation-dependent response. A three-dimensional rubber elasticity spring system that is capable of capturing the state of deformation dependence of strain hardening is used to develop a tensorial internal state variable model of the evolving anisotropic polymer response. This fully three-dimensional constitutive model is shown to be successfully predictive of the true stress vs. true strain data obtained in our isothermal uniaxial compression and plane strain compression experiments on amorphous polycarbonate (PC) and polymethylmethacrylate (PMMA) at moderate strain rates. A basis is established for providing the polymer designer with the ability to predict the flow strengths and deformation patterns of highly anisotropic materials. A companion paper by Arruda, Boyce, and Quintus-Bosz [in press] shows how the model developed herein is used to predict various anisotropic aspects of the large strain mechanical response of preoriented materials. Additional work has been done to extend the model to include the effects of strain rate and temperature in Arruda, Jayachandran, and Boyce [in press].     

红板岩材料隐式本构模型的建立及其应用研究

针对红板岩材料在岩土工程中所表现的大量模糊的和不确定的因素等特点,基于人工神经网络的学习能力,借助于室内岩石力学试验,进行了对该材料的力学本构特性进行了神经网络模拟研究,提出了隐式本构模型的思想和方法,并通过该方法对该岩石的流变试验结果进行学习,获得了以网络权值结构保存的力学特性知识,由此得到了表征红板岩应力应变本构关系的隐式本构模型。应用结果表明,该方法对岩土类材料本构关系的模拟研究具有很好的应用前景。     

STRUCTURE AND THERMODYNAMICS OF GRANULAR MATERIALS

颗粒介质由大量离散的粗颗粒聚集而成,如自然界中的粗砂和碎屑堆积体等. 在工程实践中,人们依据经验和实验数据建立了许多模型,虽然可以满意地描述某些力学现象,但是对颗粒介质力学性质全貌的认识以及颗粒介质物理本质的理解仍远远不够. 颗粒介质长程无序、短程有序的结构和复杂的能量转化过程,注定了其独特的力学性质. 该文综述了颗粒介质结构探测和表征技术、热力学理论和固态-流态转变方面的新进展,特别介绍了清华大学近5 年来开展的颗粒介质结构模型化方法和双颗粒温度热力学理论. 最后,提出了开展结构分析-热力学理论的联合研究思路,以期更加深入认识颗粒介质的力学特性,探究颗粒介质的热力学根源,改善现有唯象研究现状.     

RESEARCH OF CONSTITUTIVE RELATION CORRECTION OF GEOTECHNICAL MATERIALS AND THEORETICAL SOLUTION DUE TO PILE-SOIL INTERACTION

地基土的变形模量值不仅和土层所受的先期固结压力大小直接相关, 还受桩土作用产生的附加体积应变的影响.首先, 针对岩土散体材料分析其本构关系的主要影响因素, 研究模量随埋藏深度和体积应变的变化规律, 并对Duncan-Chang本构模型进行抗拉模量值修正.其次, 综合考虑岩土材料拉压模量不等修正以及桩土作用位移边界特点, 应用变分理论推导桩土作用造成的位移、应变和应力场理论解答.最后, 应用已有的经典土压力理论和小孔扩张理论对理论推导结果进行对比和分析验证.研究结果对桩基础设计施工、相应环境保护措施的选择和设计有较大的指导作用.     

Biaxial Mechanical Evaluation of Planar Biological Materials

A fundamental goal in constitutive modeling is to predict the mechanical behavior of a material under a generalized loading state. To achieve this goal, rigorous experimentation involving all relevant deformations is necessary to obtain both the form and material constants of a strain-energy density function. For both natural biological tissues and tissue-derived soft biomaterials, there exist many physiological, surgical, and medical device applications where rigorous constitutive models are required. Since biological tissues are generally considered incompressible, planar biaxial testing allows for a two-dimensional stress-state that can be used to characterize fully their mechanical properties. Application of biaxial testing to biological tissues initially developed as an extension of the techniques developed for the investigation of rubber elasticity [43, 57]. However, whereas for rubber-like materials the continuum scale is that of large polymer molecules, it is at the fiber-level (∼1 μm) for soft biological tissues. This is underscored by the fact that the fibers that comprise biological tissues exhibit finite nonlinear stress-strain responses and undergo large strains and rotations, which together induce complex mechanical behaviors not easily accounted for in classic constitutive models. Accounting for these behaviors by careful experimental evaluation and formulation of a constitutive model continues to be a challenging area in biomechanics. The focus of this paper is to describe a history of the application of biaxial testing techniques to soft planar tissues, their relation to relevant modern biomechanical constitutive theories, and important future trends. This revised version was published online in July 2006 with corrections to the Cover Date.     

On modeling the micro-indentation response of an amorphous polymer

Interest in instrumented indentation experiments as a means to estimate mechanical properties has grown rapidly in recent years. Although numerous nano/micro-indentation experimental studies on polymeric materials have been reported in the literature, a corresponding methodology for extracting material property information from the experimental data does not exist. This situation for polymeric materials exists primarily because baseline numerical analyses of sharp indentation using appropriate large deformation constitutive models for the nonlinear viscoelastic–plastic response of these materials appear not to have been previously reported in the literature. An existing, widely used theory for amorphous polymers (e.g. [Boyce, M., Parks, D., Argon, A.S., 1988. Large inelastic deformation of glassy polymers. Part 1: Rate dependent constitutive model. Mechanics of Materials 7, 15–33; Arruda, E.M., Boyce, M.C., 1993. Evolution of plastic anisotropy in amorphous polymers during finite straining. International Journal of Plasticity 9, 697–720]) has been recently found to lack sufficient richness to enable one to quantitatively reproduce the major features of the indentation load-versus-depth curves for some common amorphous polymers [Gearing, B.P., 2002. Constitutive equations and failure criteria for amorphous polymeric solids. Ph.D. thesis, Massachusetts Institute of Technology].This study develops a new continuum model for the viscoelastic–plastic deformation of amorphous polymeric solids. We have applied the constitutive model to capture salient features of the mechanical response of the amorphous polymeric solid poly(methyl methacrylate) (PMMA) at ambient temperature and stress states under which this material does not exhibit crazing. We have conducted compression-tension strain-controlled experiments, as well as stress-controlled compression-creep experiments, and these experiments are used to calibrate the material parameters in the constitutive model for PMMA.We have implemented our constitutive model in a finite-element computer program, and using this finite-element program we have simulated micro-indentation experiments on PMMA. We show that our constitutive model and finite element simulations reproduce the experimentally-measured indentation load-versus-depth response with reasonable accuracy.     

Nonlinear multiscale modeling of polymer materials

In this study, a hyperelastic multiscale modeling technique is used to predict elastic properties of polycarbonate and polyimide polymer systems using a set of widely accepted atomistic force fields. The model incorporates molecular simulations and a nonlinear, continuum mechanics-based, constitutive formulation that incorporates the behavior of the polymer materials as predicted from molecular simulations. The predicted properties of the polymers using multiple force fields are compared to experimentally measured values. Both static and dynamic molecular simulations are performed using molecular mechanics energy minimizations and molecular dynamics simulation techniques, respectively. The results of this study indicate that static molecular simulation is a useful tool to predict the bulk-level nonlinear mechanical behavior of polymers for finite deformations. It is found that the AMBER force field yields the most accurate predicted mechanical and physical properties of the modeled polymer systems compared to the other force fields used in this study.     

自振荡凝胶的力——化耦合行为调控及其应用研究

自振荡凝胶是一类由特殊振荡化学反应驱动而产生周期性变形的新型智能软材料. 该智能材料无需通过调节外界激励因素便可产生自治的交替性膨胀和收缩, 从而持续性地将化学能转化为机械能, 在工程和生物医学领域具有广阔的应用前景. 自振荡凝胶内部存在复杂的力学与化学的非线性耦合效应, 其动力学行为特征受试样的边界约束情况、外部作用力大小与形式等力学因素和反应物浓度、催化剂类型等化学因素的显著影响, 亦受试样的几何形状、外界光照强度、环境温度等其他物理因素的调控. 自振荡凝胶已在力学与化学信号传播、材料结构自组装、微量物质运输、微型作动器、新型力学传感器等基础和应用领域取得众多突破性研究进展. 基于相关研究, 系统论述了自振荡凝胶的力-- 化耦合行为调控及其主要应用现状, 为进一步深入研究新型智能软材料及其应用提供参考.      

A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures

Four currently utilized constitutive models for metals (i.e. Johnson–Cook, Zerilli–Armstrong, Bodner–Partom and Khan–Huang) are investigated and used to predict the mechanical behaviors of the materials and compared with experimental results. Limitations for each model in describing work-hardening behavior of metals are discussed.     

Progress in thermal-mechantical effects induced by laser

对激光辐照诱导的热与力学问题研究进展进行了综述,包括材料在高温、高升温速率下的本构关系,典型薄板和柱壳等结构在激光辐照下的热力破坏效应,多层材料体系的激光破坏行为等几个方面,并着重介绍了包含相变与烧蚀过程的激光破坏分析模型与机制研究,激光辐照效应的流-热-固耦合数值模拟方法,以及短脉冲激光引起的冲击与破坏机理等方面的研究新进展.     

Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates

A robust physically consistent three-dimensional constitutive model is developed to describe the finite mechanical response of amorphous polymers over a wide range of temperatures and strain rates, including the rubbery region and for impact loading rates. This thermomechanical model is based on an elastic–viscoplastic rheological approach, wherein the effects of temperature, strain rate, and hydrostatic pressure are accounted for. Intramolecular, as well as intermolecular, interactions under large elastic–inelastic behavior are considered for the mechanisms of deformation and hardening. For a wide range of temperatures and strain rates, our simulated results for poly(methyl methacrylate) (PMMA) and polycarbonate (PC) are in good agreement with experimental observations.     

RESEARCH PROGRESS IN THE INJURY AND PROTECTION TO VEHICLE AND PASSENGERS UNDER EXPLOSIVE SHOCK LOADING

在当前反恐战争和地区武装冲突迫切形势下,如何提高车辆及人员的防护能力是诸多学科工作者面临的共同挑战。综述了威胁车辆安全的常见爆炸物、其作用原理和影响爆炸物作用载荷的因素,阐述了爆炸物爆炸冲击对车辆的破坏和人员损伤的各类不同形式。在此基础上分析了相关的实验、表征和模拟技术的研究进展,总结了国内外车辆爆炸防护结构的研究现状,包括轻质防护材料和结构的研发趋势,展望了车辆爆炸防护结构设计的研究趋势。     

Simulation of rate dependent plasticity for polymers with asymmetric effects

Polycarbonate is an amorphous polymer which exhibits a pronounced strength-differential effect between compression and tension. Also strain rate and temperature influence the mechanical response of the polycarbonate. The concept of stress mode dependent weighting functions is used in the proposed model to simulate the asymmetric effects for different loading speeds. In this concept, an additive decomposition of the flow rule is assumed into a sum of weighted stress mode related quantities. The characterization of the stress modes is obtained in the octahedral plane of the deviatoric stress space in terms of the mode angle, such that stress mode dependent scalar weighting functions can be constructed. The resulting evolution equations are updated using a backward Euler scheme and the algorithmic tangent operator is derived for the finite element equilibrium iteration. The numerical implementation of the resulting set of constitutive equations is used in a finite element program for parameter identification. The proposed model is verified by showing a good agreement with the experimental data. After that the model is used to simulate the laser transmission welding process.     

颗粒材料破碎演化路径细观热力学机制

颗粒材料在高应力环境下会发生颗粒破碎现象,颗粒破碎不仅影响颗粒材料的力学特性,同时与大量工程问题密切相关.目前的相关研究主要集中在唯象地描述颗粒破碎的演化以及破碎对力学特性的影响层面,对颗粒破碎演化路径的物理机制研究较少.本文基于热力学框架,采用细观力学中细观-宏观的均匀化方法推导了颗粒体系弹性能和破碎能量耗散,并在最大能量耗散的假设下,在热力学框架内,建立了理想化的无摩擦球体颗粒等向压缩过程的弹性-破碎模型,阐述了颗粒材料破碎演化路径细观热力学机制.由于模型的推导不依赖任何唯象的经验公式,因此模型中包含的参数均有明确的物理意义.模型预测与前人试验结果对比表明,材料的初始级配对弹性压缩模量和破碎应力的影响并不相同:不同分形维数级配对应的弹性体变模量存在极大值,而破碎应力却随着分形维数的增大单调递增;颗粒破碎的演化符合最大能量耗散原理,且颗粒材料的压缩曲线可以分为弹性-破碎-拟弹性3个机制不同的阶段.