Reversible addition–fragmentation chain‐transfer polymerization: Unambiguous end‐group assignment via electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry was performed to identify the structure of polymeric methyl acrylates generated via the cumyl dithiobenzoate (CDB), cumyl p‐fluorodithiobenzoate (CPFDB), and 1‐phenylethyl dithiobenzoate (PEDB) mediated reversible addition–fragmentation chain‐transfer (RAFT) polymerizations. The relatively simple spectra clearly demonstrate the end groups of this living free‐radical polymerization technique. Only polymeric chains carrying one leaving group of the RAFT agent and the dithiobenzoate end group as the active RAFT center were discovered. Multiple‐stage mass spectrometric experiments and oxidation of the dithioester end group confirmed the structure of the generated polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4032–4037, 2002     

Controlled,radical reversible addition–fragmentation chain‐transfer polymerization in high‐surfactant‐concentration ionic miniemulsions

Living free‐radical polymerization of methacrylate and styrenic monomers with ionic surfactants was carried out with reversible addition–fragmentation chain transfer in miniemulsion with different surfactant types and concentrations. The previously reported problem of phase separation was found to be insignificant at higher surfactant concentrations, and control of the molar mass and polydispersity index was superior to that of published miniemulsion systems. Cationic and anionic surfactants were used to examine the validity of the argument that ionic surfactants interfere with transfer agents. Ionic surfactants were suitable for miniemulsion polymerization under certain conditions. The colloidal stability of the miniemulsions was consistent with the predictions of a specific model. The living character of the polymer that comprised the latex material was shown by its transformation into block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 960–974, 2004     

Characterization and rheological properties of model alkali‐soluble rheology modifiers synthesized by reversible addition–fragmentation chain‐transfer polymerization

Model alkali‐soluble rheology modifiers of different molar masses were synthesized by the reversible addition–fragmentation chain‐transfer polymerization of methyl methacrylate, methacrylic acid, and two different associative macromonomers. The polymerization kinetics showed good living character including well‐controlled molar mass, molar mass linearly increasing with conversion, and the ability to chain‐extend by forming an AB block copolymer. The steady‐shear and dynamic properties of a core‐shell emulsion, thickened with the different model alkali‐soluble rheology modifiers, were measured at constant pH and temperature. The steady‐shear data for latex solutions with conventional rheology modifiers exhibited the expected thickening, whereas the associative rheology modifiers showed contrasting rheology behavior. The dynamic measurements revealed that the latex solutions thickened with the conventional rheology modifiers exhibit solid‐like (dominant G′) behavior as compared with the associative rheology modifiers that give the latex solution a liquid‐like (dominant G″) character. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 223–235, 2003     

Preparation and characterization of heteroarm H‐shaped terpolymers by combination of reversible addition‐fragmentation transfer polymerization and ring‐opening polymerization

Heteroarm H‐shaped terpolymers, [(poly(L ‐lactide))(polystyrene)]poly(ethylene oxide)[(polystyrene)(poly(L ‐lactide))], [(PLLA)(PS)]PEO[(PS)(PLLA)], in which PEO acts as a main chain and PS and PLLA as side arms, have been successfully prepared via combination of reversible addition–fragmentation transfer (RAFT) polymerization and ring‐opening polymerization (ROP). The first step is the synthesis of the PEO capped with one terminal dithiobenzoate group and one hydroxyl group at every chain end, [(HOCH₂)(PhC(S)S)]PEO[(S(S)CPh)(CH₂OH)] from the reaction of carboxylic acid with ethylene oxide. Then, the RAFT polymerization of styrene (St) was carried out using [(HOCH₂)(PhC(S)S)]PEO[(S(S)CPh)(CH₂OH)] as RAFT agent and AIBN as initiator, and the triblock copolymer, [(HOCH₂)(PS)]PEO[(PS)(CH₂OH)], was formed. Finally, the heteroarm H‐shaped terpolymers, [(PLLA)(PS)]PEO[(PS)(PLLA)], were produced by ROP of LLA, using triblock copolymer, [(HOCH₂)(PS)]PEO[(PS)(CH₂OH)], as macroinitiator and Sn(Oct)₂ as catalyst. The target products and intermediates were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 789–799, 2007     

Reversible addition–fragmentation chain transfer polymerization of styrene under microwave irradiation

Reversible addition–fragmentation chain transfer (RAFT) polymerizations of styrene under microwave irradiation (MI), with or without azobisisobutyronitrile, were successfully carried out in bulk at 72 and 98 °C, respectively. The results showed that the polymerizations had living/controlled features, and there was a significant enhancement of the polymerization rates under MI in comparison with conventional heating (CH) under the same conditions. The polymer structures were characterized with ¹H and ¹³C NMR. The results showed the same structure for both polymers obtained by MI and CH. Successful chain‐extension experimentation further demonstrated the livingness of the RAFT polymerization carried out under MI. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6810‐6816, 2006     

Reversible addition–fragmentation chain transfer graft copolymerization of styrene and m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate from polypropylene lanterns: Solid phases for scavenging applications

The γ‐initiated reversible addition–fragmentation chain transfer mediated free‐radical graft copolymerization of styrene and m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate (TMI) from a polypropylene (PP) solid phase was performed with cumyl phenyldithioacetate (CPDA) as the chain‐transfer agent. The initial CPDA concentration was 8 × 10^?3 mol L^?1. Polymerizations were performed with a dose rate of 0.18 kGy h^?1 at the ambient temperature. Initial comonomer mixtures with 15, 30, and 50 mol % TMI were used. Depending on the amount of TMI in the initial comonomer mixture, the plot of the grafting ratio versus the time showed two grafting regimes (for 15 and 50 mol % TMI) or one (for 30 mol % TMI). Scavenger lanterns with 15 and 50 mol % TMI featured two isocyanate loading regimes, the second with higher loading capacities. The scavenger lanterns with 30 mol % TMI showed a linear loading capacity over the full grafting ratio. A maximum loading capacity of 110 μmol per scavenger lantern was achieved with 50 mol % TMI at a grafting ratio of approximately 60 wt %. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 857–864, 2006     

Facile synthesis of comb,star, and graft polymers via reversible addition–fragmentation chain transfer (RAFT) polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization has been shown to be a facile means of synthesizing comb, star, and graft polymers of styrene. The precursors required for these reactions were synthesized readily from RAFT‐prepared poly(vinylbenzyl chloride) and poly(styrene‐co‐vinylbenzyl chloride), which gave intrinsically well‐defined star and comb precursors. Substitution of the chlorine atom in the vinylbenzyl chloride moiety with a dithiobenzoate group proceeded readily, with a minor detriment to the molecular weight distribution. The kinetics of the reaction were consistent with a living polymerization mechanism, except that for highly crowded systems, there were deviations from linearity early in the reaction due to steric hindrance and late in the reaction due to chain entanglement and autoacceleration. A crosslinked polymer‐supported RAFT agent was also prepared, and this was used in the preparation of graft polymers with pendant polystyrene chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2956–2966, 2002     

Reversible addition–fragmentation transfer (RAFT) copolymerization of methyl methacrylate and styrene in miniemulsion

In the reversible addition–fragmentation transfer (RAFT) copolymerization of two monomers, even with the simple terminal model, there are two kinds of macroradical and two kinds of polymeric RAFT agent with different R groups. Because the structure of the R group could exert a significant influence on the RAFT process, RAFT copolymerization may behave differently from RAFT homopolymerization. The RAFT copolymerization of methyl methacrylate (MMA) and styrene (St) in miniemulsion was investigated. The performance of the RAFT copolymerization of MMA/St in miniemulsion was found to be dependent on the feed monomer compositions. When St is dominant in the feed monomer composition, RAFT copolymerization is well controlled in the whole range of monomer conversion. However, when MMA is dominant, RAFT copolymerization may be, in some cases, out of control in the late stage of copolymerization, and characterized by a fast increase in the polydispersity index (PDI). The RAFT process was found to have little influence on composition evolution during copolymerization. The synthesis of the well‐defined gradient copolymers and poly[St‐b‐(St‐co‐MMA)] block copolymer by RAFT miniemulsion copolymerization was also demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6248–6258, 2004     

Long‐lived intermediates in reversible addition–fragmentation chain‐transfer (RAFT) polymerization generated by γ radiation

A novel experimental procedure is presented that allowed probing of reversible addition–fragmentation chain‐transfer (RAFT) free‐radical polymerizations for long‐lived species. The new experimental sequence consisted of gamma irradiation of a mixture of initial RAFT agent (cumyl dithiobenzoate) and monomer at ambient temperature, a subsequent predetermined waiting period without initiation source also at ambient temperature, and then heating of the reaction mixture to a significantly higher temperature. After each sequence step, the monomer conversion and molecular weight distribution were determined, indicating that controlled polymer formation occurs only during the heating period. The results indicated that stable intermediates (either radical or nonradical in nature) are present in such experiments because thermal self‐initiation of the monomer can be excluded as the reason for polymer formation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1058–1063, 2002     

Star polymer synthesis using trithiocarbonate functional β‐cyclodextrin cores (reversible addition–fragmentation chain‐transfer polymerization)

Polystyrene stars were synthesized with reversible addition–fragmentation chain‐transfer (RAFT) polymerization. The core of the stars comprised a trithiocarbonate heptafunctional β‐cyclodextrin ring. Polymerizations were performed at 100 and 120 °C in the absence of an extraneous initiator and at 60 °C in the presence of a radical initiator. Monofunctional trithiocarbonate was also synthesized and used to make linear polystyrene to allow direct a comparison with the star synthesis. In all cases, the polymerization kinetics conformed to pseudo‐first‐order behavior. The measured molecular weights of the stars were found to deviate from those predicted on the basis of the monomer/trithiocarbonate group ratio. The extent of this deviation was dependent on the polymerization temperature, RAFT agent concentration, and conversion. Despite the low radical concentrations, termination reactions are suggested to play a significant role in the seven‐arm polystyrene star syntheses. The synthetic method was found to be suitable for generating star block structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4498–4512, 2002     

α‐Cyanobenzyl dithioester reversible addition–fragmentation chain‐transfer agents for controlled radical polymerizations

A series of new reversible addition–fragmentation chain transfer (RAFT) agents with cyanobenzyl R groups were synthesized. In comparison with other dithioester RAFT agents, these new RAFT agents were odorless or low‐odor, and this made them much easier to handle. The kinetics of methyl methacrylate radical polymerizations mediated by these RAFT agents were investigated. The polymerizations proceeded in a controlled way, the first‐order kinetics evolved in a linear fashion with time, the molecular weights increased linearly with the conversions, and the polydispersities were very narrow (～1.1). A poly[(methyl methacrylate)‐block‐polystyrene] block copolymer was prepared (number‐average molecular weight = 42,600, polydispersity index = 1.21) from a poly(methyl methacrylate) macro‐RAFT agent. These new RAFT agents also showed excellent control over the radical polymerization of styrenics and acrylates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1535–1543, 2005     

Reversible addition–fragmentation chain transfer polymerization of methyl methacrylate in emulsion

Theoretical simulations showed that for controlled/living radical polymerization in an emulsion system, some of the earliest born particles could be superswollen to a size close to 1 μm. We hypothesized that the superswelling of these particles would lead to colloidal instability. Under the guidance of the simulation results, reversible addition–fragmentation chain transfer (RAFT) emulsion polymerization of methyl methacrylate (MMA) was carried out. Experimental results showed that increasing the initiation rate, surfactant level, and targeted molecular weight could improve the colloidal stability of the RAFT polymerization of MMA in an emulsion. The experimental results were in full accord with the theoretical predictions. The poor control of the molecular weight and polydispersity index was found to have a close relationship with the colloidal instability. For the first time, we demonstrated that RAFT polymerization could successfully be implemented with little coagulum, good control of the molecular weight, and a low polydispersity index with the same process used for traditional emulsion polymerization but with higher surfactant levels and initiation rates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:2837–2847, 2006     

Reversible addition‐fragmentation chain transfer polymerization of vinyl acetate under high pressure

In this work, high molecular weight polyvinyl acetate (PVAc) (M_n,GPC = 123,000 g/mol, M_w/M_n = 1.28) was synthesized by reversible addition‐fragmentation chain transfer polymerization (RAFT) under high pressure (5 kbar), using benzoyl peroxide and N,N‐dimethylaniline as initiator mediated by (S)‐2‐(ethyl propionate)‐(O‐ethyl xanthate) (X1) at 35 °C. Polymerization kinetic study with RAFT agent showed pseudo‐first order kinetics. Additionally, the polymerization rate of VAc under high pressure increased greatly than that under atmospheric pressure. The “living” feature of the resultant PVAc was confirmed by ¹H NMR spectroscopy and chain extension experiments. Well‐defined PVAc with high molecular weight and narrow molecular weight distribution can be obtained relatively fast by using RAFT polymerization at 5 kbar. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1430–1436     

Synthesis and swelling behavior of comb‐type grafted hydrogels by reversible addition–fragmentation chain transfer polymerization

The comb‐type grafted hydrogels poly(N‐isopropylacrylamide)‐g‐poly(N‐isopropylacrylamide) (PNIPAM‐g‐PNIPAM) and poly(acrylic acid)‐g‐poly(N‐isopropylacrylamide) (PAAc‐g‐PNIPAM) were prepared by reversible addition–fragmentation chain transfer polymerization. A macromolecular chain‐transfer agent was prepared first. Then, hydrogels were obtained by a reaction with a comonomer (N‐isopropylacrylamide or acrylic acid) in the presence of N,N‐methylenebisacrylamide as a crosslinker. The equilibrium swelling ratios and the swelling and deswelling kinetics of PNIPAM‐g‐PNIPAM were measured. The effects of the chain length and amount on the swelling behavior were investigated. The deswelling mechanism was illustrated. Meanwhile, the PAAc‐g‐PNIPAM hydrogel was used to confirm the versatility of this novel method. It was prepared in an alcoholic medium, whereas hydrogen‐bonding complexes formed in 1,4‐dioxane, which was chosen as the reaction medium for the PNIPAM‐g‐PNIPAM hydrogel. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2615–2624, 2005     

Implementing the reversible addition–fragmentation chain transfer process in PREDICI

There is currently a highly controversial debate about the nature of the reversible addition–fragmentation chain transfer (RAFT) mechanism. In this debate, kinetic computer modeling is frequently used as a powerful tool to correlate experimental data with theoretical models to deduce the rate coefficients that govern the process. Frequently, the PREDICI program package has been used as a simulation tool. Recently, the implementation and mathematical basis of the RAFT process, with respect to PREDICI, have been criticized. This communication discusses the mathematical and mechanistic implementation of the RAFT process in the PREDICI program package and elucidates the well‐founded mathematical basis of the approach. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1441–1448, 2004     

Reversible addition–fragmentation chain transfer polymerization of 2‐naphthyl acrylate with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate as a chain‐transfer agent

The reversible addition–fragmentation chain transfer (RAFT) polymerizations of 2‐naphthyl acrylate (2NA) initiated by 2,2′‐azobisisobutyronitrile were investigated with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as a RAFT agent at various temperatures in a benzene solution. The results of the polymerizations showed that 2NA could be polymerized in a controlled way by RAFT polymerization with CPDN as a RAFT agent; the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with the monomer conversion. The polydispersities of the polymer were relatively low up to high conversions in all cases. The chain‐extension reactions of poly(2‐naphthyl acrylate) (P2NA) with methyl methacrylate and styrene successfully yielded poly(2‐naphthyl acrylate)‐b‐poly(methyl methacrylate) and poly(2‐naphthyl acrylate)‐b‐polystyrene block polymers, respectively, with narrow polydispersities. The P2NA obtained by RAFT polymerization had a strong ultraviolet absorption at 270 nm, and the molecular weights had no apparent effect on the ultraviolet absorption intensities; however, the fluorescence intensity of P2NA increased as the molecular weight increased and was higher than that of 2NA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2632–2642, 2005     

Controlled radical copolymerization of styrene and maleic anhydride and the synthesis of novel polyolefin‐based block copolymers by reversible addition–fragmentation chain‐transfer (RAFT) polymerization

Reversible addition–fragmentation chain transfer (RAFT) was applied to the copolymerization of styrene and maleic anhydride. The product had a low polydispersity and a predetermined molar mass. Novel, well‐defined polyolefin‐based block copolymers were prepared with a macromolecular RAFT agent prepared from a commercially available polyolefin (Kraton L‐1203). The second block consisted of either polystyrene or poly(styrene‐co‐maleic anhydride). Furthermore, the colored, labile dithioester moiety in the product of the RAFT polymerizations could be removed from the polymer chain by UV irradiation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3596–3603, 2000     

Reversible addition–fragmentation chain transfer polymerization of methyl methacrylate in suspension

The reversible addition–fragmentation chain transfer polymerization of methyl methacrylate mediated by 2‐cyanoprop‐2‐yl dithiobenzoate (CPDB) in bulk (60 and 70 °C) and suspension (70 °C) was studied, and in both polymerization systems, a good control of the molecular weight and polydispersity was observed. Stable suspension polymerizations were carried out over a range of CPDB concentrations, and with increasing CPDB concentration, the particle size and polydispersity index of the produced polymer decreased. The former was ascribed to the lower viscosities of the monomer and polymer droplets at low conversions, which caused easier breakup with the applied shear stresses. Lower polydispersity indices at higher CPDB concentrations were probably caused by a diminished gel effect, which was observed at lower CPDB concentrations at high conversions, causing a broadening of the molecular weight distribution. The livingness of the polymers formed in suspension was proven by successful chain extensions with methyl methacrylate, styrene, and 2‐hydroxyethyl methacrylate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2001–2012, 2005     

Influence of the chemical structure of dithiocarbamates with different N‐groups on the reversible addition–fragmentation chain transfer polymerization of styrene

Polymerizations of styrene with azobisisobutyronitrile initiation or thermal initiation have been performed in the presence of dithiocarbamates with different N‐groups, that is, benzyl 4,5‐diphenyl‐1H‐imidazole‐1‐carbodithioate ( 2a ), benzyl 1H‐1,2,4‐triazole‐1‐carbodithioate ( 2b ), benzyl indole‐1‐carbodithioate ( 2c ), benzyl 2‐phenyl‐indole‐1‐carbodithioate ( 2d ), benzyl phenothiazine‐10‐carbodithioate ( 2e ), benzyl 9H‐carbazole‐9‐carbodithioate ( 2f ), and benzyl dibenzo[b,f]azepine‐5‐carbodithioate ( 2g ). The results show that the structure of the N‐group of dithiocarbamates has significant effects on the activity of dithiocarbamates for the polymerization of styrene. 2a , 2b , 2c , 2d , and 2f are effective reversible addition–fragmentation chain transfer (RAFT) agents for the RAFT polymerization of styrene, and the polymerizations have good living characteristics. However, in the cases of 2e and 2g , the obtained polymers have uncontrolled molecular weights and broad molecular weight distributions. The polymerization rate is markedly influenced by the conjugation structure of the N‐group of the dithiocarbamate, and the polymerization rate of 2b is greater than that of 2a . For 2b , the rate of polymerization seems independent of the RAFT agent concentration. However, a significant retardation in the rate of polymerization can be observed in the case of 2c . 2d is more effective than 2c , and the substitution group of phenyl on this dithiocarbamate has obvious effects on the effectiveness of the controlled polymerization of styrene. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4849–4856, 2005     

Comparative study of classical surfactants and polymerizable surfactants (surfmers) in the reversible addition–fragmentation chain transfer mediated miniemulsion polymerization of styrene and methyl methacrylate

Cationic and anionic amphiphilic monomers (surfmers) were synthesized and used to stabilize particles in miniemulsion polymerization. A comparative study of classical cationic and anionic surfactants and the two surfmers was conducted with respect to the reaction rates and molecular weight distributions of the formed polymers. The reversible addition–fragmentation chain transfer process was used in the miniemulsion polymerization reactions to control the molecular weight distribution. The reaction rates of the surfmer‐stabilized miniemulsion polymerization of styrene and methyl methacrylate were similar (in most cases) to those of the classical‐surfactant‐stabilized miniemulsion polymerizations. The final particle sizes were also similar for polystyrene latexes stabilized by the surfmers and classical surfactants. However, poly(methyl methacrylate) latexes stabilized by the surfmers had larger particle sizes than latexes stabilized by classical surfactants. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 427–442, 2006