Assay of mixtures of chlorpheniramine maleate,pyrilamine meleate and phenylpropanolamine hydrochloride in cold-allergy tablets by difference spectrophotometry

Mixtures of chlorpheniramine maleate (CPM) and phenylpropanolamine hydrochloride (PPA), with and without pyrilamine maleate (PRM), are assayed by u.v. difference spectrophotometry without prior separation. The spectra for CPM and PRM in solutions at pH 1 and pH 6 show differences whereas the spectra for PPA remain the same at pH 1 and 6. For PPA, quantitation is based on the spectral change on oxidation to benzaldehyde with metaperiodate; this oxidation does not affect CPM and PRM. Calibration plots are linear for 6.7–99.9 μg ml^?1 CPM (r = 0.9992), 12.7–50.6 μg ml^?1 PRM (r = 0.9997) and 25–115.3 μg ml^?1 PPA (r = 0.9980) in the presence of one another. Average recoveries (± RSD) from simulated PPA/CPM tablets were: PPA, 98.4 ± 0.4% (without PRM, n = 3), 99.8 ± 0.4% (with PRM, n = 5); CPM, 99.3 ± 0.6% (without PRM, n = 3), 99.2 ± 0.4% (with PRM, n = 5); and PRM, 99.5 ± 0.2% (in PPA/CPM/PRM tablets, n = 5). The method was successfully applied to commercial cold-allergy tablets containing these compounds.     

Determination of two antibacterial binary mixtures by chemometrics-assisted spectrophotometry

Simple chemometrics-assisted spectrophotometric methods are described for determination of 2 antibacterial binary mixtures. The mixtures are composed of norfloxacin in combination with tinidazole and erythromycin (as ethylsuccinate ester or stearate salt) in combination with trimethoprim. The normal UV absorption spectra of each pair of drugs in the studied mixtures, in the range of 200-400 nm, showed a considerable degree of spectral overlapping: 77.5% for the norfloxacin-tinidazole mixture and 84.3% for the erythromycin-trimethoprim mixture. Resolution of the norfloxacin-tinidazole mixture and trimethoprim in the presence of erythromycin was accomplished successfully by using zero-crossing first derivative (1D), classical least-squares (CLS) regression analysis, and principal component regression (PCR) analysis methods. In addition, an alternative simple and accurate colorimetric method was developed for the determination of erythromycin in the presence of trimethoprim using 2,4-dinitrophenylhydrazine. All variables affecting the development of the colored chromogen were studied and optimized, and the product was measured at 526-529 and 538-542 nm for erythromycin stearate and erythromycin ethylsuccinate, respectively. For zero-crossing, first derivative technique Beer's law was obeyed in the general concentration range of 2-50 microg/mL for norfloxacin, tinidazole, and trimethoprim with good correlation coefficients (0.9994-0.9996). Overall limits of detection (LOD) and quantification (LOQ) ranged from 0.59 to 2.81 and 1.96 to 9.33 microg/mL, respectively. The obtained results from CLS and PCR were compared with those obtained from a 1D spectrophotometric method. With the exception of erythromycin, overall recoveries in the average range of 97.33-103.0% were obtained with a considerable degree of accuracy when the suggested methods were applied to analysis of synthetic binary mixtures, some commercial dosage forms such as tablets and oral suspension without interference from the commonly encountered excipients and additives. For the colorimetric method, Beer's law was obeyed in the general concentration range of 7.21-28.84 microg/mL erythromycin with good correlation coefficients (0.9980-0.9996). Overall LOD and LOQ ranged from 0.73 to 1.65 and 2.43-5.49 microg/mL, respectively. Erythromycin derivatives were determined in the commercial dosage form, without interference from trimethoprim-encountered excipients and additives. The obtained results, with both chemometric and colorimetric methods, have been compared with those obtained from reported methods, and proper F- and t-values were observed, indicating no significant difference between the results of the suggested methods and reported method(s). The good percentage recoveries and proper statistical data obtained proved the efficiency of the proposed procedures for the determination of the studied drugs in their binary mixtures as well as in the commercial dosage forms with quite satisfactory precision.     

Determination of 1,4-benzodiazepines in drug dosage forms by difference spectrophotometry

A spectrophotometric method has been developed for the determination of seven 1,4-benzodiazepines, namely: chlordiazepoxide, diazepam, nitrazepam, oxazepam, lorazepam, temazepam and cinolazepam. The method involves reduction of the target compounds using Zn/HCl and measuring the difference in the absorbance before and after reduction. The quantities of zinc and acid required for efficient reduction were carefully studied. 1–20 g ml^–1 of the compounds could be determined with < 1% error. The method was applied successfully to the determination of these compounds in pharmaceutical dosage forms. The results were sufficiently accurate and precise and comparable to those from the official methods.     

Determination of mixtures of ampicillin and cloxacillin in pharmaceuticals by second-derivative spectrophotometry

Mixtures of ampicillin-Na and cloxacillin-Na are assayed by peak-to-baseline and zero-crossing second-derivative spectrophotometry. The procedure does not require any separation step. Calibration plots are linear (r = 0.9999) up to 30 μg ml^?1 of ampicillin-Na at 216 nm and up to 40 μg ml^?1 ampicillin-Na or cloxacillin-Na at 228 nm or 248.8 nm, respectively, in the presence of one another. Detection limits at the p = 0.05 level of significance, range from 0.15 pg ml^?1 to 0.33 μg ml^?1. The method was successfully applied to commercial injections and capsules containing these penicillins.     

差示分光光度法同时测定药物中的PPA和扑尔敏

用差示分光光度法同时测定旧康泰克胶囊中扑尔敏和盐酸苯丙醇胺(PPA)含量.扑尔敏检测波长273 nm,0.01～0.07 mg/mL范围内线性关系良好(r=0.9996),平均回收率100.15%,RSD=2.28%;PPA检测波长240 nm,其工作曲线在0.01～0.06 mg/mL范围内成线性关系(r=0.9993),平均回收率96.11%,RSD=2.13%.     

Application of derivative spectrophotometry to determination of flavonoid mixtures

Derivative spectrophotometry (DS) was applied to determination of flavonols and a flavon in two-compound mixtures by means of 'zero-crossing' technique. Selected mixtures were, quercetin-kaempferol, quercetin-myricetin and quercetin-luteolin. The developed method was used as a complementary technique to a HPLC system, which does not separate quercetin and luteolin.     

Resolution of binary mixtures of cephalothin and clavulanic acid by using first derivative spectrophotometry

First-derivative spectrophotometric method with a “zero-crossing” technique of measurement has been used for the quantification of two-components mixtures of cephalothin and clavulanic acid. As the absorption bands of these drugs overlap, both direct and derivative spectrophotometric methods have been investigated and evaluated by a rigorous statistical analysis of the experimental data. The first-derivative spectrophotometric method was found to be more accurate, direct and reproducible. Beer's law was valid over the concentration range 2.0–28.0 mg/l for both compounds. The detection limits of cephalothin and clavulanic acid, at a 0.05 level of significance, were calculated to be 0.13 and 0.15 mg/l. The method was applied for determining these antibiotics in mixtures, some of them containing inject-able dosage forms of cephalothin, and so to determine both compounds in saline and glucosed physiological sera.     

Determination of vitamins in mixtures of various composition by spectrophotometry with self-modeling curve resolution

A simple and reliable method for the analysis of mixtures of water- and fat-soluble vitamins in the UV spectral region has been developed using the chemometrical algorithm of self-modeling curve resolution for the decomposition of the spectra of mixtures. The influence of various factors on the result of spectra decomposition has been investigated. The proposed method has been applied to the analysis of model vitamin mixtures as well as multivitamin preparations and energetic drinks.     

Simultaneous determination of copper and iron by second derivative spectrophotometry using mixtures of ligands

A highly sensitive and selective second derivative spectrophotometric method has been developed for the determination of copper and iron in mixtures. The method is based on the separation of the analytes by liquid-liquid extraction as picrate ion pairs. Iron-picrate, reacts in the organic phase of DCE with 5-phenyl-3-(4-phenyl-2-pyridinyl)-1,2,4-triazine (PPT). Similarly the copper-picrate reacts with 2,9-dimethyl-4,7-diphenyl-1,10-phenantroline (bathocuproine). The extracts were evaluated directly by derivative spectrophotometric measurement, using the zero-crossing approach for determination of copper and graphic method for iron. Iron and copper were thus determined in the ranges 8-120 ng ml(-1) and 8-125 ng ml(-1), respectively, in the presence of one another. The detection limits achieved (3sigma) were 2.9 ng ml(-1) of iron and 2.8 ng ml(-1) of copper. The relative standard deviations were in all instances less than 2.1%. The proposed method was applied to the determination of both analytes in river and tap water and the results were consistent with those provided by the AAS standard method.     

Determination of ethacrynic acid in pharmaceutical formulations by difference ultraviolet spectrophotometry after derivatisation with N-acetylcysteine

A selective difference spectrophotometric procedure is described for the assay of ethacrynic acid (a diuretic drug) in pharmaceutical dosage forms. The method is based on the reaction of the drug with N-acetylcysteine at pH 7.4 and ambient temperature, affording thiol adducts having different spectral properties, and involves the measurement of the absorbance of the reaction mixture relative to an equimolar solution of unreacted ethacrynic acid. The absorbance at 270 nm (A(270)) and the absorbance difference, delta A=A(270-A(244), obtained from the difference spectrum, were found to be linearly correlated with the drug concentration. The proposed spectrophotometric procedure was applied successfully to the determination of ethacrynic acid in pharmaceutical formulations using a reversed-phase high-performance liquid chromatographic procedure as a reference method.     

Derivative spectrophotometry in the analysis of mixtures of phenols and herbicides

Derivative spectrophotometry (zero-crossing technique) was applied to the determination of selected phenols and herbicides in two-component mixtures. Methyl- and chlorophenols (3-methylphenol, 2,3- and 3,4-dimethylphenol, 2,5-, 2,6- and 3,4-dichlorophenol and 2,4,5-trichlorophenol) and triazine, uracil and urea herbicides (simazine, propazine, hexazinone, bromacil and metoxuron) were examined. The RSD values ranged between 0.05 and 4% and the recoveries obtained were between 97 and 110%. The developed derivative spectrophotometric method was also applied as a complementary technique for the separation of overlapping peaks of sample compounds obtained by HPLC with diode-array detection. Metoxuron and 3-methylphenol, metoxuron and 2,5-dichlorophenol and simazine and 2,6-dichlorophenol were determined simultaneously by this method at the level of 1 x 10(-3) g l-1.     

Evaluation of computer-assisted second-derivative ultraviolet spectrophotometry for analysis of binary mixtures

Three second-derivative spectra identification (DESPI) programs have been developed. The DESPI-1 program is used for the computerized recognition of the spectral components in known binary mixtures. The DESPI-2 and DESPI-3 programs are applied to the automatic identification of unknown binary mixtures. The performances of these computer-assisted procedures are evaluated and compared for nineteen single compounds (purines and pyrimidines) and twelve binary mixtures.     

Simultaneous determination of beryllium and aluminium in mixtures using derivative spectrophotometry

The spectrophotometric determination of beryllium and aluminium with 5,8-dihydroxy-1,4-naphthoquinone in the presence of a non-ionic surfactant is reported. Absorption maxima, molar absorptivity and Sandell's Sensitivity of 1:2 (M:L) beryllium and aluminium complexes are, 585 nm and 598 nm, 1.63 x 10(4) l.mole(-1).cm(-1) and 2.04 x 10(4) l.mole(-1).cm(-1), and 0.55 ng/cm(2) and 1.32 ng/cm(2) respectively. Beer's law is obeyed between 7.20-3.96 x 10(2) ng/ml beryllium and 1.08 x 10(1)-1.08 x 10(3) ng/ml aluminium. A method for simultaneous determination of beryllium and aluminium in their mixture using derivative spectra is described. The range 3.6 x 10(1)-3.6 x 10(2) ng/ml beryllium could be determined in the presence of 1.08 x 10(2)-1.08 x 10(3) ng/ml aluminium, and vice versa.     

Analysis of polyethylenimine by spectrophotometry of its copper chelate

Polyethylenimine (PEI) forms a copper chelate with a N/Cu ratio of about 5 and with extinction coefficients of about 175 at 6350 A. and 4250 at 2694 A. Solutions of PEI-copper chelate obey Lambert's and Beer's laws and show increased optical density in the presence of chloride ion. Above pH 4.25, hydrogen ion has little effect. A comparison with the copper chelate of polyvinylamine suggests that PEI has a highly, branched structure. Analysis of PEI via its copper chelate is described.     

分光光度法测定钨矿中微量钨

提出了一种测定钨矿中微量钨的分光光度法。该法摩尔吸光系数ε为9.6× 1 0 4 L· mol-1· cm-1,相对标准偏差 <2 % ,加标回收率为 95%～ 1 0 4 %。WO3 含量在 0～ 30 μg/50 m L 范围内满足比尔定律     

Analysis of cement by atomic absorption spectrophotometry and volumetric method

A new method to determine the composition of cement raw mix and cement is devised. The sample was fused with a mixture of sodium carbonate and lithium tetraborate (3:1) at 925 degrees C for 10 min. The fusion cake was dissolved in hydrochloric acid. The concentration of analyte in solution was either determined by atomic absorption spectrophotometry or titrimetry. The proposed method is quick and the analysis for interested oxides (SiO(2), Al(2)O(3), Fe(2)O(3), and CaO) can be completed within 1 hr. The accuracy and precision are comparable to that of X-ray fluorescence spectrometry.