Incorporation of cationic electron donor of Ni-pyridyltetrathiafulvalene with anionic electron acceptor of polyoxometalate

A new salt-[Ni(II)(DMSO)(5)(TTFPy)](2)[α-SiW(12)O(40)] (1)-based on polyoxometalates was prepared by coordinating a cationic electron donor of pyridyltetrathiafulvalene (TTFPy) with Ni(II). Although the TTFPy molecule did not form a salt with the anionic α-[SiW(VI)(12)O(40)](4-) because of the weak charge-transfer (CT) interaction, the coordination of Ni with the pyridyl moiety permitted salt formation driven by electrostatic interaction, giving a single crystal of 1. Crystallographic analysis, UV-vis and IR spectroscopy and electrochemical characterization revealed that the fully oxidized α-[SiW(VI)(12)O(40)](4-) was crystallized with the neutral TTFPy moiety from the acetonitrile solution because of the low electron-withdrawing ability of α-[SiW(VI)(12)O(40)](4-), forming a brown-orange crystal. The crystal colour quickly turned to black by immersing in methanol, due to CT from TTF moiety to α-[SiW(VI)(12)O(40)](4-), which was caused by the solvent effect. Increase in the solvent acceptor number from 18.9 for acetonitrile to 41.3 for methanol resulted in the enhancement of the electron withdrawing ability of α-[SiW(VI)(12)O(40)](4-) by 0.317 V in methanol.     

Inorganic-organic hybrid materials with different dimensions constructed from copper-fluconazole metal-organic units and Keggin polyanion clusters

Inorganic-organic hybrid materials based on Keggin polyoxometalate building blocks combined with Cu(II)/Cu(I) and flexible fluconazole ligand [1-(2,4-difluorophenyl)-1,1-bis[(1H-1,2,4-triazol-1-yl)methyl]methanol] (Hfcz) have been obtained by hydrothermal methods, namely, [Cu(II)(2)(Hfcz)(4)(SiW(12)O(40))].3H(2)O (1), [Cu(II)(4)(fcz)(4)(H(2)O)(4)(SiMo(12)O(40))].6H(2)O (2), [Cu(II)(2)(fcz)(2)][Cu(II)(4)(fcz)(4)(SiW(12)O(40))][Cu(II)(2)(fcz)(2)(H(2)O)(2)(SiW(12)O(40))].6H(2)O (3), (Et(3)NH)(2)[Cu(I)(2)(Hfcz)(2)(SiW(12)O(40))].2H(2)O (4), (Et(3)NH)(2)[Cu(I)(2)(Hfcz)(2)(SiW(12)O(40))].H(2)O (5) and [Cu(I)(4)(Hfcz)(4)(SiMo(12)O(40))] (6). Their structures have been determined by single-crystal X-ray diffraction analyses, and the compounds are further characterized by elemental analyses, IR spectra and thermogravimetric (TG) analyses. In 1, Cu(II) cations are bridged by fluconazole ligands to form a 3D lvt coordination polymeric network, which is connected by (SiW(12)O(40))(4-) anions to form a complicated 3D (4,6)-connected framework with the topology of (4(2).6(4))(4(6).6(7).8(2))(2). In 2, two fcz(-) anions chelate two Cu(2+) cations to form a [Cu(fcz)](2)(2+) dimer, which is bridged by (SiW(12)O(40))(4-) polyanions to generate a 2D (4,4) grid. Compound 3 is formed by three types of co-crystallizing subunits including a dimer [Cu(fcz)](2)(2+), a dumbbell molecule [Cu(4)(fcz)(4)(SiW(12)O(40))] and an infinite chain {[Cu(2)(fcz)(2)(H(2)O)(2)(SiW(12)O(40))](2-)}(infinity). In compounds 4 and 5, Hfcz ligands link Cu(+) cations to generate 1D coordination polymeric units, and (SiW(12)O(40))(4-) polyanions connect these metal-organic units to form two types of (6(3)) sheets which are topological isomerism. In compound 6, (SiMo(12)O(40))(4-) polyanions fixed in Cu(I)-Hfcz square rings are further extended into a 2D sheet via linking Cu(I) atoms of different rings. By carefully inspection of the structures of 1-6, it is believed that various transition-metal organic units and Keggin polyanions with different coordination modes are important for the formation of the different structures. In addition, electrochemical behaviors of compounds 1, 2, 5 and 6 have been investigated.     

Polynuclear complexes of main group and transition metals with polyaminopolycarboxylate and polyoxometalate

Six supramolecular compounds constructed by main group and transition metals, polyoxotungstates (SiW(12)O(40)(4-)) and trans-N,N,N',N'-1,2-cyclohexanediaminotetraacetic acid (H(4)CyDTA), (NH(4))(3)[Ni(4)Na(H(2)O)(10)(CyDTA)(2)][SiW(12)O(40)]·10H(2)O (1) (NH(4))(2)[Cu(3)Na(2)(HCyDTA)(2)(H(2)O)(13)][SiW(12)O(40)]·5H(2)O (2), (NH(4))(2)[Zn(5)(CyDTA)(2)(H(2)O)(16)][SiW(12)O(40)]·8H(2)O (3), (NH(4))(4)[Cd(4)(CyDTA)(2)(H(2)O)(8)][SiW(12)O(40)]·6H(2)O (4), (NH(4))(4)[Sr(3)(HCyDTA)(2)(H(2)O)(14)][SiW(12)O(40)]·2H(2)O (5) and [Ca(4)(H(2)CyDTA)(2)(H(2)O)(22)][SiW(12)O(40)]·8H(2)O (6), were synthesized in aqueous solution and characterized by IR spectroscopy, thermogravimetric analysis and single-crystal X-ray diffraction techniques. Single-crystal structure analyses indicate they are constructed by the complexes with different nuclearity and polyoxometalates. In the sequence of Ni, Cu, Zn the nuclearity of the homometallic complex units increases from 2 to 5. Cadmium ions gives a tetranuclear complex with a compact structure. In 5 and 6 the main group metal ions and CyDTA form polymeric chains. CyDTA exhibits rather different coordination patterns to main group metal ions and transition metal ions due to their ionic radii and electronic configuration. The complex units and polyoxometalates arrange in different patterns due to the different shapes of the complex units. The compounds exhibit different thermal decomposition processes and the formation of compounds 3 and 4 quenches ligand-centered emissions and gives a ligand-to-metal emission. The study on various temperature susceptibilities of 1 and 2 shows that there is an antiferromagnetic coupling in the two compounds but coupling patterns are different.     

A Novel Optical Complex between an Organic Substrate and a Polyoxometalate. Crystal and Molecular Structure of alpha-H(4)SiW(12)O(40).4HMPA.2H(2)O (HMPA = Hexamethylphosphoramide)

A solvated complex of alpha-H(4)SiW(12)O(40).4HMPA.2H(2)O composed the heteropolytungstate alpha-H(4)SiW(12)O(40) and the organic substrate hexamethylphosphoramide (HMPA) has been synthesised, purified, and characterized. The electronic spectra (lambda = 220-500 nm) as well as the (1)H NMR spectra for the title compound dissolved in CD(3)CN establish that this complex dissociates into free SiW(12)O(40)(4)(-) and HMPA moieties in solution unless the organic substrate HMPA is present in very high concentrations. The solid reflectance electronic spectra and IR spectra indicate that there is interaction between the alpha-H(4)SiW(12)O(40) and the organic substrate. The complex has no photosensitivity under irradiation of sunlight, but under the near-UV light result in a charge transfer by oxidation of the HMPA and the reduction of the polyoxometalate. Light yellow polyhedrons of the title compound crystallize from the aqueous solvent of acetonitrile and aqueous solution as the formula of alpha-H(4)SiW(12)O(40).4HMPA.2H(2)O in the monoclinic, space group P2(1). The unit cell has a = 12.791(3) ?, b = 22.103(6) ?, c = 15.532(4) ?, beta = 102.860(10) degrees, and Z = 2. From the bond-valence parameters, it was found that the four hydrogen atoms of the polyoxometalate were combined with the N atoms of the four HMPA respectively. The title compound shows a certain second-order and third-order nonlinear optical response of I(2)(omega) = 0.7I(2)(omega)(KDP) and chi((3)) = 2.63 x 10(-)(11) esu, respectively.     

SiW12、PbS对提高TiO2纳米管光电转换效率的协同效应研究

复合薄膜可以改善TiO2纳米管在光电转换时电子-空穴易复合和吸收光谱范围窄的缺陷。用电沉积法将多酸H4SiW12O40（SiW12）沉积在TiO2纳米管表面形成SiW12/TiO2纳米管复合薄膜,再用连续离子层吸附反应法（SILAR）将PbS吸附到SiW12 /TiO2纳米管复合薄膜表面,形成PbS/ SiW12/TiO2纳米管复合薄膜,所得薄膜的光电转换效率相较于TiO2纳米管提高了57倍。X射线衍射（XRD）和扫描电子显微镜（SEM）表征结果表明,用电沉积法和连续离子层吸附反应法实现了PbS/SiW12/TiO2纳米管复合薄膜的制备;紫外可见（UV-vis）吸收光谱测试表明,复合薄膜的光吸收带边扩展到了可见光区域,电化学阻抗测试（EIS）表明,复合薄膜具有更高的电子转移速率;荧光光谱（PL）测试表明,复合薄膜拥有更小的电子-空穴复合率。以上结果说明,SiW12、PbS与TiO2纳米管复合,很好地抑制了TiO2纳米管电子-空穴的复合,并拓宽了吸收光谱范围,能显著地提高TiO2纳米管的光电性能。本文探索了一种有效提高TiO2纳米管光电转换效率的方法,对TiO2纳米管复合薄膜的制备具有一定的参考意义。     

铁-谷氨酸-硅钨酸三元配合物作为高活性非均相类Fenton催化剂降解4-氯酚

Fenton氧化法通过Fe2+离子催化分解H2O2产生羟基自由基,能够氧化降解绝大多数有机污染物.但是传统的均相Fenton氧化法使用高浓度二价铁盐作为催化剂,催化剂不便于回收利用,而且还会引发新的环境问题.另外,均相Fenton氧化法通常需要在pH约为3的酸性条件下进行,在较高pH条件下,有机物氧化降解速率降低,同时铁盐水解产生铁泥.文献报道了一些含铁固体材料作为非均相类Fenton催化剂,能够解决催化剂回收和重复利用问题,但是许多固体催化剂仍然只在酸性条件下表现出较高催化活性.多金属氧簇是除过渡金属氧化物之外的一类光催化剂.近年来,多金属氧簇在Fenton氧化过程中的应用开始受到关注.可以预计,含铁的多金属氧簇固体化合物有可能同时具有类Fenton催化活性和光催化活性.本文以三价铁盐(FeI I)、谷氨酸(Glu)和硅钨酸(SiW)为原料在水溶液中合成了一种不溶性的三元固体配合物FeШGluSiW,并用电感耦合等离子体原子发射光谱(ICP-AES)、热重分析(TG)、傅里叶变换红外光谱(FT-IR)、紫外-可见漫反射光谱(UV-vis DRS)、X射线衍射(XRD)和场发射扫描电镜(FE-SEM)对FeШGluSiW进行了表征.根据ICP-AES, TG和FT-IR结果推断, FeШGluSiW可能的化学组成为[Fe(C5H8NO4)(H2O)]2SiW12O40·13H2O,其中含有铁、谷氨酸根单元和Keggin结构的SiW12O404?阴离子. FE-SEM和XRD测试结果表明, FeШGluSiW是由结晶度较低、尺寸为100–200 nm的无规则颗粒组成,并含有无定形相.通过考察在自然初始pH 6.5条件下100 mg/L 4-氯酚(4-CP)在FeШGluSiW(1.0 g/L)/H2O2(20 mmol/L)体系中的氧化降解反应,我们发现在暗态和光照条件下,4-CP完全降解所需时间分别为40和15 min,延长反应时间至2 h,总有机碳(TOC)去除率分别达到27%和72%.结果表明, FeШGluSiW具有很高的催化活性,而且在光照条件下活性更高.进一步研究发现, FeШGluSiW在pH 3–6.5范围内均表现出高的催化活性,而且在酸性条件下活性更高.用ICP-AES测定Fe元素在溶液中的析出量,证实4-CP氧化降解主要发生在固体催化剂表面.在反应体系中加入正丁醇能显著抑制4-CP降解,说明4-CP降解反应涉及羟基自由基的氧化作用.在光照反应条件下,催化剂颜色明显变深,表明光照条件下的反应机理涉及催化剂中SiW12O404?阴离子的还原.考虑到催化剂中含有谷氨酸根和SiW12O404?杂多阴离子,推测H2O2有可能通过氢键吸附于催化剂表面,这可能是FeШGluSiW表现出高催化活性的重要原因.结合文献报道的含铁固体材料类Fenton催化机理和多金属氧簇光催化机理,可以很好地解释4-CP降解反应实验结果.在暗态条件下, FeШGluSiW的催化机理归因于催化剂表面FeII的氧化还原循环FeII?FeI,即H2O2分子在催化剂表面分解产生羟基自由基,从而导致4-CP氧化;而在光照条件下,除了催化剂中FeI I的类Fenton催化作用之外,催化剂中SiW12O404?杂多阴离子的光催化作用同时发生,导致4-CP降解速率加快.在光催化过程中,4-CP可以被激发态SiW12O404?直接氧化,也可以被激发态SiW12O404?与H2O相互作用产生的羟基自由基氧化.被还原的杂多阴离子可以被O2氧化,也可以被H2O2氧化,因而H2O2的存在也促进了FeШGluSiW的光催化作用.     

Construction of polyoxometalates-based coordination polymers through direct incorporation between polyoxometalates and the voids in a 2D network

A series of polyoxometalates (POMs)-based coordination polymers, namely, {[Cu(2,3-Me2pz)(2,5-Me2pz)0.5]4(SiW12O40)(2,5-Me2pz)}n (2,3-Me2pz = 2,3-dimethylpyrazine; 2,5-Me2pz = 2,5-dimethylpyrazine; 1), {[Cu2(4,4'-bipy)4(H2O)4](SiW12O40)(H2O)18}n (4,4'-bipy = 4,4'-bipyridine; 2), {[Cu(2-Mepz)1.5]3(PMo12O40)(H2O)3.5}n (2-Mepz = 2-methylpyrazine; 3), {[Ag(2,3-Me2pz)1.5]4(SiW12O40}n (4), {[Cu(pz)1.5]4(SiW12O40)(H2O)3}n (pz = pyrazine; 5), {[Cu(2,3-Me2pz)1.5]4(SiW12O40)}n (6), {[Cu(4,4'-bipy)1.75]4(SiW12O40)(H2O)2}n (7), and {[Cu2(4,4'-bipy)4(H2O)4](SiW12O40)(4,4'-bipy)2(H2O)4}n (8), were synthesized through direct incorporation between POMs and the voids of the 2D network. Crystal structural analysis reveals that the relationship between the size of the void of the 2D network and that of POMs is of key importance for successful synthesis of POMs-based open metal-organic frameworks. Guest replacement shows that the pore size of the framework constructed through direct incorporation between POMs and the voids of the 2D network is very sensitive to guest molecules.     

One-electron redox processes during polyoxometalate-mediated photocatalytic reactions of TiO(2) studied by two-color two-laser flash photolysis

The one-electron redox processes of several compounds during polyoxometalate (POM)-mediated photocatalytic reactions of TiO(2) were investigated using the two-color two-laser flash-photolysis technique. The efficiency of the one-electron oxidation of aromatic sulfides by the trapped hole (h(tr) (+)) or the surface-bound OH radical (OH(s) (.)) is found to be significantly enhanced due to electron transfer from the conduction band (CB) of TiO(2) to the POM. The efficiency of the electron transfer from the CB of TiO(2) to the POM decreases in the order H(2)W(12)O(40) (6-) < SiW(12)O(40) (4-) < PW(12)O(40) (3-), that is, it depends on the reduction potential (E(red)) of the POMs. Electron injection from PW(12)O(40) (4-) in the excited state (PW(12)O(40) (4-*)) to the CB of TiO(2) was clearly observed using the two-color two-laser flash-photolysis technique. Storage of electrons in the TiO(2)/PW(12)O(40) (3-)/methyl viologen (MV(2+)) ternary system was also achieved upon two-color two-laser irradiation.     

过氧钛钨硅杂多配合物的合成、表征及催化活性

合成了过氧钛钨硅杂多酸盐α-M6-mHm[SiW11(TiO2)O39].xH2O和α-M10-mHm[SiW9(TiO2)3O37].xH2O(M=K, TBA), 用IR, UV吸收光谱,极谱-循环伏安, 183W NMR, XPS和XRD等测试方法对其性质、结构进行研究。结果表明, 它们都是具有Keggin结构的过氧杂多配合物,TiO2基的引入将其极谱半波电位提高至-0.3V以上, 它们对顺丁烯二酸的H2O2环氧化反应具有显著高的催化活性。     

Stability and structure in alpha- and beta-Keggin Heteropolytungstates, [X(n)(+)W12O40)](8-n)(-), X = p-block cation

beta-[SiW(12)O(40)](4)(-) (C(3)(v) symmetry) is sufficiently higher in energy than its alpha-isomer analogue that effectively complete conversion to alpha-[SiW(12)O(40)](4)(-) (T(d)) is observed. By contrast, beta- and alpha-[AlW(12)O(40)](5)(-) (beta- and alpha-1; C(3)(v) and T(d), respectively) are sufficiently close in energy that both isomers are readily seen in (27)Al NMR spectra of equilibrated (alpha-beta) mixtures. Recently published DFT calculations ascribe the stability of beta-1 to an electronic effect of the large, electron-donating [AlO(4)](5)(-) (T(d)) moiety encapsulated within the polarizable, fixed-diameter beta-W(12)O(36) (C(3)(v)) shell. Hence, no unique structural distortion of beta-1 is needed or invoked to explain its unprecedented stability. The results of these DFT calculations are confirmed by detailed comparison of the X-ray crystal structure of beta-1 (beta-Cs(4.5)K(0.5)[Al(III)W(12)O(40)].7.5H(2)O; orthorhombic, space group Pmc2(1), a = 16.0441(10) A, b = 13.2270(8) A, c = 20.5919(13) A, Z = 4 (T = 100(2) K)) with previously reported structures of alpha-1, alpha- and beta-[SiW(12)O(40)](4)(-), and beta(1)-[SiMoW(11)O(40)](4)(-).     

Voltammetric Reduction of alpha- and gamma-[S2W18O62]4- and alpha-, beta-, and gamma-[SiW12O40]4-: isomeric dependence of reversible potentials of polyoxometalate anions using data obtained by novel dissolution and conventional solution-phase processes

Comparative studies on the voltammetric reduction of the alpha and gamma isomers of Dawson [S(2)W(18)O(62)](4)(-) and alpha, beta, and gamma forms of Keggin [SiW(12)O(40)](4)(-) polyoxometalate anions have been undertaken. For the six reversible one-electron [S(2)W(18)O(62)](4)(-)(/5)(-)(/6)(-)(/7)(-)(/8)(-)(/9)(-)(/10)(-) processes in acetonitrile, reversible potentials (E(0)(')) were found to be independent of isomeric form within experimental error (+/-5 mV). However, because both the alpha and gamma* isomers of [Bu(4)N](4)[S(2)W(18)O(62)] are insoluble in water, solid-state voltammetric studies with microcrystals adhered to electrode surfaces in contact with aqueous Et(4)NCl and Bu(4)NCl electrolyte media were also possible. Although no isomeric distinction was again detected in the solid-state studies, it was found that reduction of adhered solid by four or more electron equivalents led to rapid dissolution. When Et(4)NCl was the electrolyte, this dissolution process coupled with potential cycling experiments enabled conventional solution-phase data to be obtained in water for the analogous six one-electron reduction steps previously detected in acetonitrile. A strong medium effect attributed to Lewis acidity effects was apparent upon comparison with E(0)(') data obtained in water and acetonitrile. In contrast, with the [SiW(12)O(40)](4)(-) system, E(0)(') values for the [SiW(12)O(40)](4)(-)(/5)(-)(/6)(-)(/7)(-) processes in acetonitrile exhibited a larger (about 70 mV) dependence on isomeric form, and the isomerization step, [gamma-SiW(12)O(40)](6)(-)--> [alpha-SiW(12)O(40)](6)(-), was detected on the voltammetric time scale. The influence of isomeric form on reversible potential data is considered in terms of structural and charge density differences exhibited in the [S(2)W(18)O(62)](4)(-) and [SiW(12)O(40)](4)(-) systems studied in this paper and published data available on the alpha, beta, gamma, and gamma isomers of [As(2)W(18)O(62)](6)(-) and [P(2)W(18)O(62)](6)(-) Dawson anions and Keggin systems.     

Application of tetrazole-functionalized thioethers with different spacer lengths in the self-assembly of polyoxometalate-based hybrid compounds

Three metal-organic networks based on Keggin-type polyoxometalates (POMs) have been hydrothermally synthesized by tuning the spacer lengths of bis(tetrazole)-functionalized thioether ligands and structurally characterized: [Cu(4)(bmtm)(4)][SiW(12)O(40)]·2H(2)O (1), [Cu(4)(bmte)(3.5)][SiW(12)O(40)] (2), and [Cu(4)(bmtp)(4)][SiW(12)O(40)] (3) [bmtm = 1,1'-bis(1-methyl-5-mercapto-1,2,3,4-tetrazole)methane, bmte = 1,2-bis(1-methyl-5-mercapto-1,2,3,4-tetrazole)ethane, and bmtp = 1,5-bis(1-methyl-5-mercapto-1,2,3,4-tetrazole)pentane]. The spacer lengths and sulfhydryl of bis(tetrazole)-functionalized thioether ligands play important roles in the final framework formation, as shown by X-ray diffraction analysis. In compound 1, with the connection of a N,S bridge of bmtm, two kinds of binuclear Cu(I) units are formed and linked to construct a one-dimensional (1D) chain. The [SiW(12)O(40)](4-) (SiW(12)) cluster provides four terminal O atoms linking four binuclear units to generate a two-dimensional layer with (8(3))(2)(8(5)·10) topology. In compound 2, centrosymmetric octameric moieties composed of two equivalent tetrameric Cu(I) units are bridged by bmte ligands to form a 1D chain. The SiW(12) clusters show an unusual (2,8)-connected mode to connect with the 1D chain and construct a four-connected three-dimensional (3D) network with 5(3)·6(2)·7 topology. Compound 3 exhibits a rare 3D host framework with a type of large cavity and two types of small windows. The SiW(12) clusters as templates are strongly cemented into the large cavities and completely encircled by small windows. Furthermore, the compound 2 bulk-modified carbon-paste electrode (2-CPE) displays good electrocatalytic activity toward the reduction of nitrite.     

H_2O-DMSO体系中联吡啶甲基化及其钨硅酸盐的形成

以Keggin型钨硅酸H_4[SiW_(12)O_(40)]·24H_2O和MN~(2+)为原料,4,4′-联吡啶(4,4′-bipy)为有机前驱体,水和二甲基亚砜(DMSO)为混合溶剂,在水热条件下,4,4′-bipy发生N-甲基化,并与DMSO共同修饰[SiW_(12)O_(40)]~(4-)阴离子,形成了1个钨硅酸盐基无机-有机杂化化合物(CH_3)_2bipy)((CH_3)_2SOH)_2[SiW_(12)O_(40)].通过元素分析、红外光谱(IR)、热重(TG)及X-射线单晶衍射分析对该化合物进行了表征,初步探讨了该化合物的形成条件,并研究了其在水溶液中的电化学性质及其对H_2O_2还原的电催化活性.     

Mechanistic analysis of the electrocatalytic properties of dissolved alpha and beta isomers of [SiW12O40]4- and solid [Ru(bipy)3]2[alpha-SiW12O40] on the reduction of nitrite in acidic aqueous media

Voltammetric studies on the reduction of alpha and beta isomers of the Keggin polyoxometalate anion [SiW12O40]4- reveal a series of electrochemically reversible processes in acidic aqueous media. In the presence of NO2-, catalytic current is detected in the potential region of the [SiW12O40]4-/5- process. Electronic spectroscopy and simulation of voltammetric data undertaken at variable [NO2-] and [H+] allow the following mechanism to be postulated, [SiW12O40]4- + e- <-->[SiW12O40]5-, H+ + HNO2 <--> NO+ + H2O, NO+ + [SiW12O40]5- --> NO + [SiW12O40]4-. The second-order rate constant for the rate-determining step is faster for the alpha isomer than for the beta one. This may be attributed to the different reversible potentials of -0.144 V (alpha isomer) and -0.036 V vs Ag/AgCl (beta isomer) and, hence, smaller driving force for an assumed outer sphere electron-transfer reaction in the case of beta isomer. A stable, water-insoluble, thin-film [Ru(bipy)3]2[alpha-SiW12O40] chemically modified electrode was generated electrochemically via ion-exchange of [Ru(bipy)3]2+ with Bu4N+ in the [Bu4N]4[alpha-SiW12O40] solid. The first reduction process with this modified electrode gives rise to the reaction [Ru(bipy)3]2[alpha-SiW12O40](solid) + H+(soln) + e- <--> H[Ru(bipy)3]2[alpha-SiW12O40](solid). The need to transfer a proton from the solution to the solid phase for charge neutralization purposes introduces a hydrogen-ion concentration dependence into this reaction, which is not found in the solution-phase study. Nevertheless, the voltammetric catalytic activity with respect to nitrite reduction is retained with the chemically modified electrode. However, nitrite catalysis with the [Ru(bipy)3]2[alpha-SiW12O40]-modified electrode is now independent of concentration of H+, rather than exhibiting a first-order dependence, and full mechanistic details for this process are unknown.     

Construction of different dimensional inorganic-organic hybrid materials based on polyoxometalates and metal-organic units via changing metal ions: from non-covalent interactions to covalent connections

Five POM-based hybrid materials have been designed and synthesized based on different metal ions under hydrothermal conditions, namely, [Zn(Hfcz)(H(2)O)(3)](H(3)fcz)(SiMo(12)O(40)).3H(2)O (1), [Cd(2)(Hfcz)(6)(H(2)O)(2)](SiMo(12)O(40)).H(2)O (2), [Co(2)(Hfcz)(2)(SiW(12)O(40))](H(3)fcz)(2)(SiW(12)O(40)).10H(2)O (3), [Ni(2)(Hfcz)(4)(H(2)O)(2)](SiW(12)O(40)).5H(2)O (4) and [Ag(4)(Hfcz)(2)(SiMo(12)O(40))] (5), where Hfcz is fluconazole [2-(2,4-difluorophenyl)-1,3-di(1H-1,2,4-triazol-1-yl)propan-2-ol]. Their crystal structures have been determined by X-ray diffraction, elemental analyses, IR spectra, and thermogravimetric analyses (TGA). There are 1D mono and double chain-like metal-organic units in compounds 1 and 2, respectively. Polyoxometalates and metal-organic units co-crystallize through hydrogen bonds. In compound 3, metal-organic sheets are pillared by one kind of polyanion through covalent connections to generate a sandwich double-sheet. The other kind of polyanion acts as a counter-ion and lies in two adjacent sandwich double-sheets through non-covalent interactions. Polyanions covalently link metal-organic sheets to extend to an unusual 3D 5-connected framework with the (4(4).6(6)) topology in 4. In compound 5, polyanions link metal-organic chains to form a sheet through covalent connections. It is interesting that compound 5 shows an intricate (4,5,10)-connected framework with (4(4).6(2))(4)(4(8).6(2))(2)(4(14).6(19).8(12)) topology based on two kinds of Ag cations as four-connected and five-connected nodes, and polyanions as ten-connected nodes, when AgO interactions are considered. It represents the highest connected network topology presently known for polyoxometalate systems. The structural differences among 1-5 indicate the importance of different metal-organic units, coordination modes of polyanions for framework formation, and the interactions between polyanions and metal-organic units. In addition, the luminescent properties of compounds 1, 2 and 5, and electrochemical behaviours of compounds 1-5 have been investigated.     

Tuning metal@metal salt photocatalytic abilities by different charged anions

A series of high performance Ag@Ag salts photocatalysts were designed and fabricated. The photocatalytic abilities of this kind of catalysts can be tuned by altering the negative charged ions (Cl(-), Br(-), I(-), CrO(4)(2-), PO(4)(3-), PW(12)O(40)(3-), and SiW(12)O(40)(4-)): higher stability and higher charged anions lead to the stronger photocatalytic ability.     

Si取代Keggin型多酸催化光解水产氢机理

本文采用DFT和TD-DFT方法研究了Keggin型多酸[SiW12O40]4-光催化劈裂水产氢气机理。计算结果显示反应主要包括四个步骤：(i) 光激发,(ii) 电荷转移和生成单电子还原(OER)中间体,(iii) 生成双电子还原(TER)中间体,(iv)氢气从多酸表面解离和催化剂重生。当第一个电子从甲醇转移到多酸后,后续反应存在均为热力学上有利的放热途径,并推动第二个电子从甲醇自由基,H[SiW12O40]4-或[SiW12O40]5-转移到OER中间体H[SiW12O40]4-或[SiW12O40]5-生成TER中间体[SiW12O40]6-,H[SiW12O40]5-或H2[SiW12O40]4-,并伴随着H2产生。耦合的电子和质子转移路径在能量上最有利。甲醇和水分子的参与有利于H2产生。多酸在整个催化循环中,扮演了光敏剂、催化剂、电子的受体和给体。     

Polyoxometalate-stabilized Pt nanoparticles and their electrocatalytic activities

The synthesis of long-term stable polyoxometalate (POM)-stabilized Pt nanoparticles (NPs) is described here. By means of controlled bulk electrolysis, the reduced POM anions, SiW(12)O(40)(4-) (or SiW(12)) and H(2)W(12)O(40)(6-) (or H(2)W(12)), respectively, served the dual role of reductant and protecting/stabilizing ligand for the Pt NPs. Transmission electron microscopy (TEM) images confirmed the formation of 3 to 4 nm sized Pt NPs, which coincidently was in the same size range of the commercial Pt black that was used as a reference. Elemental XPS analyses showed W/Pt ratios of 0.12 for the SiW(12)- and 0.18 for the H(2)W(12)-stabilized Pt NPs, but found no evidence of the presence of Cl(-) anion in the samples. Controlled electrochemical (EC), UV-Vis, and IR data provided unambiguous evidence for the structural integrity of the POM anions on the Pt NP surface. CO stripping, methanol oxidation reaction (MOR), and oxygen reduction reaction (ORR) were used to assess their electrocatalytic activities. It was found that both SiW(12)- and H(2)W(12)-stabilized Pt NPs showed enhanced activities in MOR and ORR as compared to that of Pt black, with the latter having higher enhancement. These observations clearly demonstrated that the stabilizing POM anions have a profound influence on the electrocatalytic activity of the underlying Pt NPs.     

Coulombic aggregations of Mn(III) salen-type complexes and Keggin-type polyoxometalates: isolation of Mn2 single-molecule magnets

The reaction of Mn(III) salen-type complexes with di- and tetraanionic α-Keggin-type polyoxometalates (POMs) was performed, and three types of Coulombic aggregations containing Mn(III) out-of-plane dimeric units (abbreviated as [Mn(2)](2+)) that are potentially single-molecule magnets (SMMs) with an S(T) = 4 ground state were synthesized: [Mn(2)(5-MeOsaltmen)(2)(acetone)(2)][SW(12)O(40)] (1), [Mn(2)(salen)(2)(H(2)O)(2)](2)[SiW(12)O(40)] (2), and [Mn(5-Brsaltmen)(H(2)O)(acetone)](2)[{Mn(2)(5-Brsaltmen)(2)}(SiW(12)O(40))] (3), where 5-Rsaltmen(2-) = N,N'-(1,1,2,2-tetramethylethylene)bis(5-R-salicylideneiminate) with R = MeO (methoxy), Br (bromo) and salen(2-) = N,N'-ethylenebis(salicylideneiminate). Compound 1 with a dianionic POM, [SW(12)O(40)](2-), is composed of a 1:1 aggregating set of [Mn(2)](2+)/POM, and 2, with a tetraanionic POM, [SiW(12)O(40)](4-), is a 2:1 set. Compound 3 with [SiW(12)O(40)](4-) forms a unique 1D coordinating chain with a [-{Mn(2)}-POM-](2-) repeating unit, for which a hydrogen-bonded dimeric unit ([Mn(5-Brsaltmen)(H(2)O)(acetone)](2)(2+)) is present as a countercation. Independent of the formula ratio of [Mn(2)](2+)/POM, Mn(III) dimers and POM units in 1-3 form respective segregated columns along a direction of the unit cell, which make an alternate packing to separate evenly identical species in a crystal. The nearest intermolecular Mn···Mn distance is found in the order 2 < 3 < 1. The segregation of the [Mn(2)](2+) dimer resulted in interdimer distances long enough to effectively reduce the intermolecular magnetic interaction, in particular in 1 and 3. Consequently, an intrinsic property, SMM behavior, of Mn(III) dimers has been characterized in this system, even though the interdimer interactions are still crucial in the case of 2, where a long-range magnetic order competitively affects slow relaxation of the magnetization at low ac frequencies.     

Novel inorganic-organic hybrids constructed from multinuclear copper cluster and Keggin polyanions: from 1D wave-like chain to 2D network

Two novel inorganic-organic hybrids constructed from Keggin-type polyanions and multinuclear copper clusters based on 1-H-1,2,3-benzotriazole (HBTA), [Cu(I)(8)(BTA)(4)(HBTA)(8)(SiMo(12)O(40))]·2H(2)O (1) and [Cu(II)(6)(OH)(4)(BTA)(4)(SiW(12)O(40))(H(2)O)(6)]·6H(2)O (2), have been hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction, elemental analyses, IR spectra and thermogravimetric (TG) analyses. In compound 1, eight Cu(I) ions were linked by twelve HBTA/BTA ligands to form an octanuclear Cu(I) cluster, which is connected by SiMo(12)O(40)(4-) anion with two bridging O atoms and two terminal O atoms to construct a one-dimensional (1D) wave-like chain. The octanuclear copper unit represents the maximum subunit linked just by amine ligands in the POMs system. In 2, four BTA ligands linked five Cu(II) ions constructing a pentanuclear "porphyrin-like" subunit, which is connected by another Cu(II) ion to form a 1D metal-organic band. The SiW(12)O(40)(4-) polyanions as tetradentate inorganic linkages extend the 1D band into a two-dimensional (2D) network with (8(3))(2)(8(5)·10) topology. To the best of our knowledge, compounds 1 and 2 represent the first examples of inorganic-organic hybrids based on metal-HBTA multinuclear subunits and polyoxometalates. The photocatalysis and electrochemical properties have been investigated in this paper.