Interaction of [В<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Superscript>2–</Superscript> and [В<Subscript>12</Subscript>H<Subscript>12</Subscript>]<Superscript>2–</Superscript> with nitro compounds

The interaction of the [B₁₀H₁₀]^2– and [B₁₂H₁₂]^2– anions with aliphatic and aromatic nitro compounds (RNO₂, where R = Et, n-Pr, i-Pr, tert-Bu, Ph) has been studied under irradiation with visible and UV light. It has been shown that, depending on the reaction conditions, both mono- and disubstituted nitro-closo-decaborates can be selectively obtained in yields up to 50%.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Structural investigation of salts containing ions [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>]<Superscript>2+</Superscript> and [IrF<Subscript>6</Subscript>]<Superscript>2–</Superscript>

Double complex salts (DCS) α-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/m, a = 6.3181(3) Å, b = 10.8718(5) Å, с = 7.4526(4) Å, β = 103.568(2)°), β-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/с, a = 8.5773(3) Å, b = 10.8791(4) Å, с = = 12.6741(3) Å, β = 122.497(2)°), [Pd(NH₃)₄]₃[IrF₆]₂Cl₂·H₂O (P-1, a = 7.6080(2) Å, b = 7.6274(2) Å, с = 11.8070(3) Å, β = 122.497(2)°), and [Pd(NH₃)₄]₂[IrF₆]NO₃ (Fm-3m, a = 11.21210(10) Å) have been synthesized and structurally characterized for the first time. The existence of polymorphs for the DCS has been revealed. The influence of the chemical composition of the initial reagents on the reaction course and, respectively, the products, has been demonstrated. A hypothesis on the influence of the second coordination sphere on the formation of one or the other polymorph of the DCS has been suggested. It has been shown that the series α-[Pd(NH₃)₄][МF₆]·H₂O (M = Pt, Pd) exhibits isostructurality.     

Synthesis of diamantane via skeletal isomerization of hydrogenated cyclohepta-1,3,5-triene dimers in ionic liquid [Et<Subscript>3</Subscript>NH]<Superscript>+</Superscript> [Al<Subscript>2</Subscript>Cl<Subscript>7</Subscript>]<Superscript>–</Superscript>

Diamantane was synthesized in 91–97% yield by skeletal isomerization of a mixture of hydrogenated cyclohepta-1,3,5-triene dimers, pentacyclo[8.4.0.0^3,7.0^4,14.0^6,11]tetradecane and pentacyclo-[7.5.0.0^2,8.0^5,14.0^7,11]tetradecane, at a ratio of 3: 2 in the presence of ionic liquid [Et₃NH]⁺ [Al₂Cl₇]^–.     

Reaction of the [B<Subscript>10</Subscript>H<Subscript>9</Subscript>O<Subscript>2</Subscript>C<Subscript>4</Subscript>H<Subscript>8</Subscript>]<Superscript>–</Superscript> anion with C-nucleophiles

The reactions of 1,4-dioxane-substituted closo-decaborate anion ([B₁₀H₉O₂C₄H₈]^–) with metal acetylenides, diethyl malonate, ethyl acetoacetate, triethyl orthoformate, acetylacetone, and malonodinitrile were studied. The reactions were shown to be accompanied with substituent ring opening and attachment of the corresponding pendant functional group. The obtained compounds were characterized by various physicochemical methods (IR and polynuclear NMR spectroscopy, ESI mass spectrometry).     

Primary photophysical and photochemical processes upon UV excitation of PtBr<Subscript>6</Subscript><Superscript>2–</Superscript> and PtCl<Subscript>6</Subscript><Superscript>2–</Superscript> complexes in water and methanol

Primary photophysical and photochemical processes were studied for Pt^IVBr₆ ^2– and Pt^IVCl₆ ^2– complexes in water and methanol by ultrafast kinetic spectroscopy upon excitation in the band region of charge transfer from the ligand-centered group π-orbitals to the e_g*-orbital of Pt^IV complex anion (LMCT bands). The data obtained earlier upon excitation in the region of d—d bands were compared. Irrespective of the excitation wavelength, the photochemical properties of complexes are caused by the reactions of intermediates proceeding in the picosecond time range. These intermediates were identified as Pt^IVBr₅ ^– upon photolysis of Pt^IVBr₆ ^2– and, presumably, the Adamson radical pair [Pt^IIICl₅ ^2–(C _4v )...Cl?] upon photolysis of Pt^IVCl₆ ^2–. The difference in the exciting light wavelengths has an impact only on the first step of these processes, i.e., transition from the Franck—Condon excited state to intermediates.     

Blue and green upconversion luminescence modification of Tb<Superscript>3+</Superscript>–Yb<Superscript>3+</Superscript> co-doped Ca<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>F inverse opal

Tb³⁺–Yb³⁺ co-doped Ca₅(PO₄)₃F inverse opal photonic crystals were prepared by a self-assembly technique in combination with a sol–gel method. Upconversion luminescence characteristics of the inverse opals were investigated. The results indicate that photonic band gap has a significant effect on upconversion luminescence of Tb³⁺–Yb³⁺ co-doped Ca₅(PO₄)₃F inverse opal. Significant inhibition of the green or blue upconversion luminescence was inspected if the photonic band gap overlapped with the emission band of Tb³⁺ ions.     

Influence of ion size on the stability of chloroplumbates containing PbCl<Stack><Subscript>5</Subscript><Superscript>−</Superscript></Stack> or PbCl<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack>

The enthalpies of formation of PbCl₄, PbCl₅⁻ and PbCl₆²⁻, originating from quantum mechanics, have enabled the thermodynamic behaviour of these ions with respect to Cl-detachment to be assessed. The stability of salts containing PbCl₅⁻ and PbCl₆²⁻ as a function of the dimensions of these anions and complementary cations was studied using an approach combining the Kapustinskii-Yatsimirskii equation with basic thermochemical relationships. It was found that hexachloroplumbates of monovalent metal cations will not dissociate into metal chlorides and PbCl₄, provided the complementary cations are suitably large in size. Hexachloroplumbates of divalent metal cations have not yet been synthesised since no known metal cations attain the requisite large size. Such salts will not dissociate if the divalent metal cations are able to complex suitably large electron-donating ligands. The pentachloroplumbates of both monovalent and divalent metal cations are unstable, since no known metal cations have appropriately large ionic radii. The approach adopted appears to be useful for the examination of the thermal behaviour, stability and reactivity of chloroplumbates.     

Hydration of CBr<Subscript>3</Subscript>COOH molecules and CBr<Subscript>3</Subscript>CO<Stack><Subscript>2</Subscript><Superscript>–</Superscript></Stack> anions in aqueous solutions

The optimal structures and the vibrational frequencies of H-bonded complexes formed from one-two CBr₃COOH molecules or the CBr₃CO ₂ ^– anion with water molecules are calculated by density functional theory (B3LYP/6-31++G(d,p)). The comparison of the obtained results with the known Raman spectra of the CBr₃COOH–H₂O and NaCBr₃CO ₂ ^– ·H₂O solutions (with component molar ratios of ≤1:16) shows that they include stable hydrates: CBr₃COOH·H₂O and CBr₃CO ₂ ^– ·(H₂O)₆. The first one has a cyclic form, and the second has a cubic globular form. The vibrational band frequencies of the CBr₃COOH molecule and the CBr₃CO ₂ ^– anion in the spectra of both solutions are almost completely determined by the mutual arrangement of units in these hydrates.     

Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).     

Sol–gel synthesis of Eu<Superscript>3+</Superscript>: Tb<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> nanophosphor

Eu (0.1, 0.5 and 1.0 mol%) doped Tb₃Al₅O₁₂ (TAG) was prepared by sol–gel technique through nitrate-citrate route followed by sintering in air (1,100 °C maximum temperature). XRD analysis showed that Eu³⁺ enters the TAG lattice substitutionally replacing the Tb³⁺ ion. Both XRD as well as FTIR investigation showed improvement in crystalline phase with the increase in the sintering temperature. SEM and TEM analysis showed that the powder contains the particles in 5–20 nm size with almost spherical morphology. The excitation spectrum recorded in 300–500 nm showed dominant absorption due to Tb³⁺ while the emission spectra recorded with 380 nm excitation had strong red emission characteristic of Eu³⁺. The intensity of this emission increases with the increase of the Eu concentration from 0.1 to 0.5 mol%. However, the emission intensity decreased on further increase in Eu concentration to 1.0 mol%. This intensity variation with dopant concentration is attributed to well-known “concentration quenching” observed in rare-earth doped materials. Reasonably strong red emission due to Eu was observed when excited with the blue (480 nm) radiation of a Xe lamp indicating the usefulness of the material for the realization of white light LED.     

Nucleophilic addition of aromatic amide oximes to [2-B<Subscript>10</Subscript>H<Subscript>9</Subscript>NCC<Subscript>2</Subscript>H<Subscript>5</Subscript>]<Superscript>–</Superscript> anion

A series of closo-decaborate anions containing an O-iminoacylamide oxime fragment were synthesized by nucleophilic addition of aromatic amide oximes to 2-propionitrilium closo-decaborate anion. The isolated compounds were characterized by IR, ¹H, ¹³C–{¹H}, and ¹¹B–{¹H} NMR, and mass spectra. The structure of (Ph₄P)[2-B₁₀H₉NH=C(Et)ON=C(NH₂)C₆H₄Me-2] was determined by single-crystal X-ray analysis.     

Study on nonlinear kinetic and thermodynamics of oscillating reaction of amino Acid-BrO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>-Mn<Superscript>2+</Superscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-acetone system

With the help of the kinetic parameters (the rate constant (k _in k _p) and the apparent activation energy (E _in E _p) of the oscillatory induction period and oscillation period) of the oscillating reaction using thirteen amino acids, leucine (Leu), threonine (Thr), arginine (Arg), lysine (Lys), histidine (His), alanine (Ala), glutamine (Glu), glycine (Gly), methionine (Met), cystine (Cys), tryptophan (Trp), serine (Ser) and tyrosine (Tyr), as organic substrates in amino acid-BrO₃⁻-Mn²⁺-H₂SO₄-acetone system, then based on the Oregonator model and the thermodynamics theory on irreversible process, the thermodynamic function (ΔH _in, ΔG _in, ΔS _in and ΔH _p, ΔG _p, ΔS _p) of these oscillating system are studied. The results indicate the entropy ΔS of these oscillating reaction are negative, thereby it is proved that the oscillating reaction is a noequilibrium system with dissipation structure in agreement with the character of the oscillating reaction from disorder to order in irreversible thermodynamics. These are satisfactorily to explain the experimental phenomena.     

Synthesis and Structure of the bismuth complex [Ph<Subscript>3</Subscript>PrP]<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>[Bi<Subscript>4</Subscript>I<Subscript>16</Subscript>]<Superscript>4−</Superscript>

The complex [Ph₃P] ₄ ⁺ [Bi₄I₁₆]^4? · 2 Me₂C=O (I) was synthesized by the reaction of triphenyl(propyl)phosphonium iodide with bismuth iodide in acetone. The crystal structure of complex I was determined by X-ray crystallography. It contains, in addition to solvent molecules, two types of crystallographically independent tetrahedral tetraphenyl(propyl)phosphonium cations and tetranuclear anions [Bi₄I₁₆]^4? in a chair conformation with the bismuth atoms being in an octahedral coordination. The Bi-I distances in the anion vary within 2.8768(4)–3.2524(4) Å.     

Platinum–Ruthenium Cluster Complexes from the Reaction of Ru<Subscript>3</Subscript>(CO)<Subscript>12</Subscript> with Pt(PBu<Superscript>t</Superscript><Subscript>3</Subscript>)<Subscript>2</Subscript>

Three new platinum–ruthenium complexes: Pt₃Ru₃(PBu^t ₃)₃(CO)₁₂, 8, Pt₅Ru₃(PBu^t ₃)₃(CO)₁₂, 9 and PtRu₃(PBu^t ₃)₂(CO)₈(μ₃-PBu^t)(μ-H)₂, 10 were obtained from the reaction of Ru₃(CO)₁₂ with Pt(PBu^t ₃)₂. Compound 8 was obtained from this reaction when conducted at 25 °C. Compounds 9 and 10 were obtained when the reaction was conducted at 68 °C. The structure of 8 consists of a central triangular cluster of three ruthenium atoms with one Pt(PBu^t ₃) group bridging each of the three Ru–Ru bonds. The structure of 9 consists of a capped pentagonal bipyramidal cluster of eight metal atoms that is formed formally by the addition of two platinum atoms to 8. The structure of 10 contains a triangular cluster of three ruthenium atoms with a Pt(PBu^t ₃) group bridging one of the Ru–Ru bonds. A t-butyl phosphido ligand formed by degradation of a molecule of PBu^t ₃ bridges the three ruthenium atoms. This report is dedicated to the memory of Professor F. A. Cotton for his many pioneering contributions to inorganic and metal cluster chemistry.     

Calorimetric study of the acidic character of V<Subscript>2</Subscript>O<Subscript>5</Subscript>–TiO<Subscript>2</Subscript>/SO<Subscript>4</Subscript><Superscript>2−</Superscript> catalysts used in methanol oxidation to dimethoxymethane

The surface acidic properties of sulfated vanadia–titania catalysts prepared by various methods were investigated by adsorption microcalorimetry, using ammonia as probe molecule. The acidic characteristics of the samples were shown to be strongly affected by the preparation method, calcination temperature, and sulfur content. The samples prepared by sol–gel and mechanical grinding exhibited higher acidity than co-precipitated samples. Moreover, increasing the calcination temperature of co-precipitated samples resulted in a decrease in surface area from 402 to 57 m² g⁻¹ and sulfur content from around 4 to 0.2 mass%, but up to a certain point generated a stronger acidity. The optimal calcination temperature appeared to be around 673 K.     

A new method of synthesis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

A new method of synthesis of the B₃H₈⁻ anion has been suggested. The method uses the reaction of some metal halides (CuCl, SnCl₂, CrCl₃, PbF₂, PbCl₂, PbBr₂, and BiCl₃) with sodium tetrahydroborate. It is characterized by high (up to quantitative) yields and simplicity of isolation of the target products ((n-C₄H₉)₄N)[B₃H₈] and Cs[B₃H₈].